142,489 used machines on RESALE, but how to find them? Machine Search
Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (powder jet), water-cooled motor. Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ
Bull gear Drawing No. 14272 -161 C1 z = 113
Drive 210 kW / 985 rpm, 380 V, with starter
Vacuum processing plant Manufacturer: Fryma Type: Delmix MZM VK-7 Y.O.M.: 1994 Machine No.: M16397 Pressure inside: -1 bar Batch: 7 l for food, cosmetics, pharmaceuticals in sound condition Mobile Dimensions LWH: 900 x 800 x 1350 mm Weight: approx. 120 kg
Automatic powder dispersing system in EEx protection Make: Pierre Guerin Type: Blending System SM 20 Y.O.M.: 1994 Power: 2.5 kW Plant number: 4461 - 4450 Pump supply and output electro-pneumatic valves as good as new on mobile tub bowl Dimensions LWH: 1500 x 1100 x 1150 mm Weight: approx. 700 kg
Mixing vessel Total volume: 100 l speed-controlled agitator Speed 335-1920 rpm Engine 3000 rpm Lid outlet on the ground very high quality Dimensions LWH: 500 x 500 x 1800 mm Weight: approx. 150 kg
Laboratory homogenizer mixer Manufacturer: Becomix Type: RW 2.5 Usable volume 2.5 liters Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres Equipment: Agitator with wall scraper 20-160 rpm Left-hand rotation/counterclockwise rotation and alternating left-right rotation Homogenizer 500-6,600 rpm Surface in the product room is highly polished The following components are integrated: Vacuum pump Heating PLC control PC with process visualization and automation software Documents: available
Mixing container 150 l Filling lid (diameter 200 mm) Propeller mixer 2.2 kW stable design Outlet with valve (milk pipe) Level detector high-quality workmanship (stainless steel V4A) Dimensions LWH: 700 x 700 x 1850 mm Weight: approx. 170 kg
Agitator used Manufacturer: unknown Type: unknown Diameter approx. 900 mm Immersion depth approx. 1000 mm Engine: Figure M3AA 180 L 6 15 kW 970 rpm 380 / 660 V Dimensions: 2400 x 1200 x 1900 mm
High Speed Mixer Manufacturer: GEA Aeromatic Fielder Type PMA 65 Serial number 00208.1310 Very good condition High-speed GMP grade mixer granules 316 stainless steel with mirror polished finish for all product contact surfaces. The capacity of the mixing tank is about 65 liters, the minimum product content is 25 kg, depending on the product density. Rotor speed 1 45-450 rpm Speed rotor 2 1500-3000 rpm Choppers The mixing tank lid has a filter housing and an inflatable seal that is automatically activated. The machine has a rinsing system for the bowl and the seals. The mixing bowl has an external stainless steel heater / cooling jacket with 2 bar/80c max, 7 liters/min
Mixing container 150 l with opening lid various lid openings with valve Exhaust fitting with milk tube valve Propeller agitator Speed: 1380/224 Power: 0.55 kW Dimensions LWH: 800 x 800 x 1800 mm Weight: approx. 150 kg
New machine Stainless steel model 24-month warranty Benefits: + TOP value for money + easy & fast installation & operation + Housing made entirely of stainless steel + can of course also be combined with an ice water system + Device automatically opens the required water supply, hot/cooled water + performs the right mixture until the desired temperature is reached + powerful electronic system, microprocessor-based + Water dosing from 0.1 to 99.9 liters or 1 to 999 liters + Temperature fluctuations are automatically compensated + digital display of water temperature and quantity + Temperature is set with thermostatic mixing battery (rotary knob) + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x drain hose (2 meters length) with hook Technical data: - Dosing quantity: 0.1 - 99.9 litres or 1 - 999 litres - Temperatur ...
Universal mixer Volume: 400 ltr. Material : areas in stainless steel that are in contact with the product; Main drive: 18 / 22 KW, 1500 - 3000 rpm; Bucket speed: 70 - 140 rpm; 1 x knife head, Knife head motor: 3/4 KW, 1500 - 3000 rpm; Operating pressure: 4 - 6 kg / cm2, max. Pressure: 10 kg / cm2. --> With base; --> 2 identical mixers in stock.
Vacuum Mixer/Dryer/Inclined Bucket Mixer Manufacturer: Drais Type TR 50 EX protected with chopper The mixing plant was opened in November 2008 Renewed by the Lödige company. Material stainless steel 1.4571 / stainless steel 1.4571 Electr. Connected load Drive Vibrator 10.5 kW Adjustable, 31.5 – 380 rpm 1445/2905 rpm Product room printing Product room Temp. Product space Content Double coat Double Jacket Content With head capacitor, Double-acting mechanical seal -1/+6 bar 300 °C 56.5 liters 6 bar 7 litres Weight approx. 2000 kg Length x width x height approx. 2200 mm x 1620 mm x 2065 mm Machine is in good condition ! From plant extraction, pilot plant equipment Installation and operating instructions, as well as electrical diagram and drawings available.
front roll 560x1500 for mixing mill Buzuluk 14823
Laboratory mixer Manufacturer: IKA Type: RE 166 A N°: 489272 max. 6000 rpm, min. 50 rpm 190 volts speed-controlled, with control very good condition LWH: 450 x 410 x 760 mm
Homogenizing Mixer Manufacturer: Ekato Unimix Type SRT 50 Order# 4808/2, Series# 70888. Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete documentation in ...
Pharma Mixer Granulator Manufacturer: Diosna Machine Type: P 100 Bj. 1994 Gross capacity 122 l, net capacity approx. 37 - 100 l Mixing tool 1420/2840 rpm, 3.7/4.4 kW, drive with air gap seal Chopper tool 1420/2890 rpm, 2.8/3.5 kW, double-bladed, one-piece, drive with air gap seal Double-jacketed container for heating/cooling (without own heating/cooling unit) Probe Product Temperature Blind flange for retrofitting a DIOSNA mixing probe Sealable opening in the container lid for adding mixing components Nozzles for fluid addition Screw cap with degassing/vent filter Pneumatic spout, swivel for cleaning HMI with IPC Lauer VS486 installed on mixer in control cabinet with pressurized enclosure Protection class E Ex p (T4), Fabr. Gönnheimer, type F 800, control unit FS 821, control panel BT 81 4.1 Separate control cabinet (no Ex) with PLC Siemens S5-115U Drive 400/230/ ...
Laboratory processing plant UNIMIX Manufacturer: Haagen & Rinau Factory no.: 865 3779 Built: 1979 Permissible operating overpressure: container: 4 bar, tube side: 6 bar Total content: 5.5 l Usable volume: 3 l with speed-controlled agitator with speed-controlled homogenizer integrated heating Vertical stroke (water hydraulics) with temperature regulatioin with control system LWH: 750 x 360 x 850 mm
Compact mixer granulator of the type DIOSNA P100, manufacturer Dierks & Söhne Maschinenfabrik, Osnabrück, as it is used for the production of mixtures and granules in the lower batch size range in pharmaceutical, cosmetics and chemical applications. The stainless steel container has a swivelling, lockable lid with ventilation openings and is equipped with a multi-leaf mixing tool on the inside, consisting of a main stirrer with an additional chopper (defective). The machine stands on a painted housing base and is controlled via an attached control panel with several push buttons, key switches, emergency stop mushroom switches, timer and speed/time controller. The associated electrical control system is housed in a separate control cabinet with classic relay/contactor technology, circuit breakers and terminal strips. There is a discharge nozzle with handwheel closure on the side of the ...
Powder dispersing plant Manufacturer: Fristam Type: PE 0320 f Serial number: 0972600002-227933 Built: 2016 Power: 7.5 kW Weight: 160 kg Flow rate: 15-20 m3/h at height=5 m (water) with switchgear, FU speed-controlled Siemens control, connected in the bypass Vessel volume: approx. 450 l Machine in top-notch condition Dimensions LWH: 2100 x 1200 x 1800 mm Total weight: approx. 300 kg
Ultra-Turrax Manufacturer: IKA N°: 0185 Power: max. 15 kW 380 volts max. 1476 rpm good condition LWH: 2750 x 500 x 550 mm
The tank is made of PE-100-RC. All documents, drawings and data are available.
Ultra-Turrax Year built: 1983 Diameter: 220 mm Power: 13.5 kW 380/660 Volt 1460 rpm Wavelength: 1100 mm good condition LWH: 1700 x 400 x 350 mm
Laboratory three-roller Manufacturer: Otto Hermann (Hamburg) N°: 4023 Power: 0.1 kW 220 volts Roll width: 150 mm Ceramic LWH: 340 x 250 x 250 mm
For sale: Tuchenhagen Mixproof Valve 4'' Manifold GEA Order number: 7100.14 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.
Planetary stirrer Varimixer Bear R-N 30 Used Varimixer Bear Planetary Stirrer Model N-N 30. It is functional and ready for immediate use. The accessories are included. - 30 litres boiler - incl. whisk, flat stirrer and kneading hook - Protective grille - with a boiler - analog control -Woschow & Co Denmark -Bearmixer
Plough-charmed PSM 300 / 1 MK Material : Stainless steel Main drive: 7.5 KW Volume: 300 ltr.; Demonstration machine, 5 - 6 operating hours; --> food suitable. --> mixer available at short notice, price VHB. Facilities: - Mixing plant: ploughshares, - 1 knife head, drive: 4 KW; - Sack shakes, material: stainless steel; - Sack container buckle: at the outlet with manually operated rotary flap; - outlet height of the bagging device: 980 mm; - air flushing on the shaft passages; - Stainless steel control cabinet, fully wired -- > ready for operation; - Machine frame with pallet space, made entirely of stainless steel;
Contec Mini 15 - Concrete mixing plant Mixer M 500/300 liter Capacity 4 - 9 m3 Aggregate hoppers: 2 x 2.5 m3 on a stable metal frame Belts: 2 belts integrated and attached to the aggregate hoppers
Three Hosokawa Flexomix 160 agglomerators are available, on-site inspection is possible, machines are not connected to power.
Max. throughput capacity: 15t/h, max. liquid addition: 3%, motor power: 7.5kW, stainless steel construction, like-new condition. On-site inspection is possible.
Homogenizing Mixer Manufacturer: Becomix Type RW 15 CD Year of construction 2000 Mixing tanks for liquids Stainless steel construction, cool/heatable, pressure and vacuum resistant 24 liters total capacity 15 liters working volume bottom-mounted homogenizing head, top-mounted armature stirrer with scrapers with integrated control unit Tank design: Capacity 24 litres product space/core space PS: -1/2.0 bar product space/core space DS: 134 °C Product space/core space Capacity 1.7 litres Coat space/lid compartment PS: 4.0 bar jacket chamber/lid chamber TS: 152 °C Jacket space/lid chamber Operating data according to acceptance PB: -1/2.0 bar product space/core space PB: 3.0 bar jacket chamber/lid chamber
For smaller containers instead of tripod agitators: Agitator REITZ RW0251440200 with 0.25 KW / 1440 rpm and inclined blade stirrer With traverse made of aluminium profiles 45 45 mm. Electric motor: 3 x 230/400 volts, 50 Hz, 0.72 A current, 0.25 kW, 1.66 Nm torque, n = 1440 rpm, IP69K, shaft 20 x 40mm, weight approx. 10 kg. Motor protection socket with switch. Shaft: precision stainless steel shaft D20, length 500 mm, diameter 20 mm, Material stainless steel 1.4571 Coupling: Rigid clutch, bare, material stainless steel 1.4571 Stirrer: Two-wing welded inclined blade stirrer, diameter 200mm, material stainless steel 1.4571
Homogenizing Mixer Manufacturer: Becomix Type RW 15 CD Year of construction 2000 Mixing tanks for liquids Stainless steel construction, cool/heatable, pressure and vacuum resistant 24 liters total capacity 15 liters working volume bottom-mounted homogenizing head, top-mounted armature stirrer with scrapers with integrated control unit Tank design: Capacity 24 litres product space/core space PS: -1/2.0 bar product space/core space DS: 134 °C Product space/core space Capacity 1.7 litres Coat space/lid compartment PS: 4.0 bar jacket chamber/lid chamber TS: 152 °C Jacket space/lid chamber Operating data according to acceptance PB: -1/2.0 bar product space/core space PB: 3.0 bar jacket chamber/lid chamber
Type Barmix 300 New! complete stainless steel 2 speeds (20 and 40 revolutions per minute) 2 rotation directions 3.3 / 4.4 kw fold-up inspection stairs Safety lid Emptying forward via an emptying flap with CE marking Outer dimensions (L x W x H) : 1,750 x 950 x 1,650 mm (open lid: H: 2,100) Loading height ± 1,350 mm Dimensions Drum (L x W x H) : ± 860 x 670 x 565 mm
Homogenizing Mixer Manufacturer: Becomix Type RW 30 CD Year of manufacture 2005 Usable volume max. 30 l Used Becomix process vessel model RW30CD made of stainless steel. Approximate working volume 2-25 liters (depending on product). The unit features a clamped, domed lid and a conically welded bottom. The interior is designed for a maximum allowable operating pressure of 2 bar (29 psi) at 133°C (273°F) as well as a maximum allowable external pressure of 1 bar negative pressure (15 psi FV) at 5/133°C (41/273°F). The minimum design temperature of the metal is 5°C (41°F) at 2 bar (29 psi). The outer stainless steel jacket is designed for a maximum operating pressure of 4 bar (58 psi) at 5°C (41°F) to 152°C (306°F). The unit is equipped with a top-mounted agitator with electric drive/gearbox and a floor-side homogenizer with electric drive. Mounted in a mobile stainless stee ...
Stock # U2347-3 Used mixer by Netzsch (DE) type VPI 550 with butterfly/tri-foil agitator. Mixer has contact parts designed in stainless steel. Shaft has a working length 650 mm and is equipped with butterfly agitator, with three paddles and external diameter 1080 mm. Agitator is diven by el. motor 48 kW and is hydraulically risen up to about 130 cm. Machine is equipped with local control pane and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Mixing pan is not included.
Becomix RW2500 + Batch Tank AB1200 – Vacuum Homogenizer Mixer up to 2,500 Liters for Pharmaceutical, Cosmetics and Food | Factory overhaul planned | Turn-key possible Complete production line for mixing, dispersing, homogenizing and emulsifying on an industrial scale – consisting of main mixer RW2500 and batch container AB1200. Originally used for the production of sterile skin care products. Ideal for creams, ointments, lotions, gels and emulsions. CONDITION & AVAILABILITY • Used Becomix system in very good condition • Complete factory overhaul planned: new seals, pipes, pneumatics and control, homogenizer and drives overhauled • New stainless steel platform and power lines included • Viewing in 28844 Weyhe (near Bremen) by arrangement • Turn-key delivery with assembly and commissioning possible • 12 months warranty (except wear parts), international shippin ...
Jet-flow agitator Manufacturer: IKA Type: RT 220 KT N°: 0335 in EEx protection Power: 7.5 kW 380 V, 50 Hz 1450 rpm Built: 1995 (?) LWH: 1800 x 350 x 450 mm Weight: approx. 200 kg
Laboratory processing plant (universal machine) Manufacturer: Stephan Type: UMC 12-F No.: 712.673.01 Built: 1986 Power: 1.8 kW 380 V, 50 Hz 150-2800 rpm speed-controlled with double jacket, sight glasses with new control cabinet very good condition on request: with small vacuum pump LBH system: 500 x 400 x 640 mm LBH control cabinet: 600 x 600 x 220 mm LBH pump: 270 x 220 x 210 mm
maximum number of results exceeded
please refine your search
10 € 
