milling center used for sale

Inv. Num. : 8548 Type: XV 1000 Producer: Hardinge Bridgeport Created: 2007 Parameters: Control system: Siemens 810DE Work table length: 1100 mm Work table width: 500 mm Tool magazine: 20 pieces Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1020 mm Y-axis travel: 610 mm Travel Z-axis: 560 mm Machine weight: 6000 kg

Travel X/Y/Z: 1000mm/600mm/600mm, feed rate: 30m/min, rapid traverse: 30m/min, table dimensions X/Y: approx. 1200mm/600mm, max. table load: 800kg, tool stations: 24, tool holder: SK40, speed: 8000rpm. Machine dimensions X/Y/Z: approx. 3000mm/3500mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10346h, spindle hours: approx. 10346h. Includes a compact filtration system Interlit SUK 200/550, year of manufacture: 2000. The machine is equipped with a new control system. Documentation available. An on-site inspection is possible.

Inv. Num. : 8550 Type: VF-3 Producer: HAAS Created: 2017 Parameters: Control system: HAAS Work table length: 1219 mm Work table width: 457 mm Maximum table load (uniform): 1588 kg Spindle drive power: 22.4 kW Speed: 8100 1/min X-axis travel: 1016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Cone: BT 40 Machine weight: 5316 kg

Inv. Num. : 8551 Type: M 1200 Producer: Microcut Created: 2018 Parameters: Control system: Siemens Sinumeric 828D SW4 Work table length: 1400 mm Work table width: 710 mm Maximum table load (even): 1000 kg X-axis travel: 1200 mm Y-axis travel: 730 mm Travel travel Z-axis: 650 mm Number of axles: 30 pieces Machine weight: 10500 kg

Inv. Num. : 8553 Type: VOC 1000 Producer: INTOS Created: 2003 Parameters: Control system: Siemens 810D Work table length: 1100 mm Work table width: 500 mm Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine weight: 4500 kg

BAZ DMC 850 V BJ 2016 3 Axle

BAZ Axa VSC1 3000 BJ 1986

Manufacturer:DMG Model: DMC 160 UP Year of Manufacture: 2003 Machine with 240-tool magazine Pallet changer with 5 positions Work spindle: SK 50 Control system: Siemens Sinumerik 840D 2429093 Power-on hours: current counter: 3259 hours -> Mechanical counter with 5 digits, skipped once, thus 103259 hours. Program operating hours: current counter: 39391 hours. Condition: functional, used machine, commensurate with age Accessories: Includes tool holders, some with tools (upon request) Find more here - / Contact us at -

Inv. Num. : 8573 Type: VC 1810 Producer: TRIMILL Created: 2015 Parameters: Control system: Heidenhain iTNC 530 HSCI Work table length: 2000 mm Work table width: 1370 mm Maximum table load (uniform): 10000 kg Spindle drive power: 25 kW Maximum vertical spindle speed: 14000 1/min X-axis travel: 1800 mm Y-axis travel: 1000 mm Travel Z axis: 700 mm Maximum feed speed axis X: 30000 mm/min Maximum feed speed axis Y: 30000 mm/min Maximum feed speed axis Z: 30000 mm/min Cone: HSK – A80 Number of all tools: 10 pieces Maximum tool diameter: 110/125 mm Max. tool weight: 12 kg Machine weight: 18000 kg Equipment: Tools Thermal clamps

Manufacturer: WEEKE Model: OPTIMAT BHT 500 Year of Manufacture: 2009 Technical Specifications: - Voltage: 400 V - Frequency: 50/60 Hz - Phases: 3 + N (three-phase with neutral) - Power Consumption: 45 kW - Current Rating: 100 A - Control Voltage: 24 V Find more here - / Contact us at -

Description Machining Center Hurco BMC 30 Details Serial No. B3HM-92206089EB with control Ultimax approx. 45 tool holders Replacement spindle 4382 Hours

Inv. Num. : 8589 Type: CWK 400D Dynamic Producer: Heckert Created: 2002 Parameters: Control system: Siemens Sinumerik 840D Work table length: 400 mm Work table width: 400 mm Maximum table load (uniform): 400 kg Spindle drive power: 19 kW Number of axes: 4 pieces Tool magazine: 120 pieces Minimum spindle speed: 50 1/min Maximum spindle speed: 15000 1/min X-axis travel: 650 mm Y-axis travel: 650 mm Travel travel Z-axis: 650 mm Cone: HSK A63 Max. tool length: 350 mm Max. tool weight: 10 kg Machine height: 2600 mm Machine length: 8500 mm Machine width: 4500 mm Machine weight: 12000 kg Equipment: 2 pallets 4th axis – rotary table Chip conveyor KNOLL 450 K – 1/250 Emulsion Filtration KNOLL 210/1350 Oil mist extraction

DMG MORI CTX Beta 2000 CNC turning center was built in 2020 in Italy by Graziano Tortona S.r.l.. This extremely efficient machine is offered together with an extensive range of equipment, which significantly expands the machining capabilities and guarantees the achievement of high repeatability of the manufactured parts. Thanks to additional function packages, it is possible to perform, e.g. precise gear milling or polygon turning. All machining processes are performed inside a large working area by means of a reliable spindle and cutting tools taken from a 12-position turret. The tailstock coupled to the Z-axis moves collision-free on separate sliding guides, mounted on a bed of high thermal stability. This bed is excellent at reducing the influence of heat, while increasing the life of all components and tools. Over its service life, the machine has worked for a total of 6219 hours. ...

Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.

x-travel: . mm y-travel: . mm z-travel: . mm control: Mazatrol M-32 spindle turning speed range: 6000 U/min workpiece length - max.: 1300 mm workpiece width - max.: 550 mm workpiece height max.: 600 mm Workpiece mass max.: 1500 tool length - max.: 400 mm diameter of tools max.: D= 125 mm diameter of tools max.: freie Nachbarplätze D=260 mm Tol measurements: 20 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can f ...

CONTROLS   CNC controls HEIDENHAIN TNC 426 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 500 mm   Y-axis travel: 350 mm   Z-axis travel: 610 mm TABLE   table surface (left-right): 920 mm   table surface (front-back): 380 mm SPINDLE / HEAD   spindle revolutions (min): 50 /min   spindle revolutions (max): 18000 /min   tool fixture: ISO SK 30 TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2000 mm   space requirements -front/back-: 1700 mm   total height: 3000 mm   total weight approx.: 3200 kg ATTACHMENTS   chip conveyor: no   coolant  ...

Travel path X/Y/Z: 630mm/630mm/560mm, tool holder: HSK-63A, tool positions: 60, pallets: 2, pallet dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 6600mm/6000mm/3200mm, weight: approx. 18000kg, control: Siemens Sinumerik, operating hours: approx. 24152. The machine has a system error - Runtime Error 285, Application oem4421 - and the PLC does not start up. Documentation available. An on-site inspection is possible.

A machining center Chiron, which was completely overhauled in 2013, is available. Travel path X/Y: 6000mm/630mm, rapid traverse: 60m/min, tool positions: 92, tool holder: HSK-A63, speed: 12000rpm, torque: 140Nm, milling axes: 5, weight: approx. 20000kg, control: Siemens S840D, operating hours: 77344h. Includes scraper belt conveyor, OKZ preparation, Knoll VRF 250 vacuum rotary filter, high-pressure pump (70bar), emulsion mist extraction (2x800m³/h), central partition for pendulum machining, hydraulic unit (210bar), and Kohn linear clamping system with 8x hydraulic vices Multi 2000MFS 125/680 HD. Documentation available. An on-site inspection is possible.

Pallet dimensions X/Y: 630mm/630mm, max. table load: 2x1200kg, travel path X/Y/Z: 1000mm/800mm/850mm, spindle speed: 5000rpm, spindle taper: BT50, spindle power: 15kW, tool positions: 60, rapid traverse: 15m/min, feed rate: 5m/min. Machine dimensions X/Y/Z: approx. 5400mm/3600mm/2900mm, weight: approx. 17500kg, control: Tosnuc T-800M. Documentation available. An on-site inspection is possible.

Torni CNC, Doosan Puma TW2600, 2016 (low hours), complete with robot, it can be inspected in our warehouse in Gussago BS

Distance between centers: 3000mm, swing over bed/cross slide/in bed gap: 630mm/350mm/880mm, spindle bore: 77mm, speed: 1600rpm, power: 7.5kW, tailstock: MT5, quill stroke: 250mm. Machine dimensions X/Y/Z: approx. 5050mm/1300mm/1450mm, weight: approx. 3500kg. Includes three-jaw chuck, fixed and travelling steadies, as well as a quick-change tool holder. An on-site inspection is possible.

Control Mazatrol Smooth X 5-axis simultaneous machining Max. Rotary Diameter 658 mm Max. turning length 1,519 mm Travel X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed 4,000 rpm C-axis Max. bar passage: 80 mm Sub-spindle Drive power: 26 kW Max. spindle speed 4,000 rpm C-axis Milling spindle Drive power: 22 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 72 tool positions Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 12 kg Special equipment Knoll Chip Conveyor Knoll coolant system with paper belt filter Preparation IKZ 70 bar 70 bar high-pressure pump, 7 pressure levels Air blowing device on the upper turret Milling spindle synchronized threading ...

Control Mazatrol Smooth X 5-axis simultaneous machining Max. Rotary Diameter 658 mm Max. turning length 1,519 mm Travel X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed 4,000 rpm C-axis Max. bar passage: 80 mm Sub-spindle Drive power: 26 kW Max. spindle speed 4,000 rpm C-axis Milling spindle Drive power: 22 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 72 tool positions Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 12 kg Special equipment Knoll Chip Conveyor Knoll coolant system with paper belt filter Preparation IKZ 70 bar 70 bar high-pressure pump, 7 pressure levels Air blowing device on the upper turret Milling spindle synchronized threading ...

Year of construction 2017 Commissioning 06-2017 Control Mazatrol Smooth X 5-axis simultaneous machining Max. Rotary Diameter 658 mm Max. turning length 1,519 mm Travel X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed 4,000 rpm C-axis Max. bar passage: 80 mm Sub-spindle Drive power: 26 kW Max. spindle speed 4,000 rpm C-axis Milling spindle Drive power: 24 kW (oil-air lubrication) Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 72 tool positions Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 12 kg Special equipment Mayfran Consep 2000 II Chip Conveyor, Double Switching Filter Preparation IKZ 70 bar 70 bar high-pressure pump, 7 pressure levels Air bl ...

Control: OSP-P200LA Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travel: Z-axis 700 mm W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) Equipment: - 2 tool turrets with 16 slots each (all seats driven) - Touchsetter - IGF - -Conveyor - Bar loading magazine 3.00 m - Main spindle collet chuck - Sub-spindle three-jaw chuck - Parts catcher - Workpiece removal system -Aspirator - Coolant system with high-pressure pump, paper belt filter system

Manufacturer: Chiron Model: MILL 6000 high speed with NC swivel head Year of Manufacture: 2004 Major overhaul: 2013 Operating hours: 77,374 h Weight: 19,500 kg Power Supply: 3/N/PE ~ 50/60 Hz Working Voltage: 400 V Control Voltage: 220/24 V Power Consumption: 52 kVA Rated Current: 75 A Fuse: 80 A Last spindle replacement: March 2021 (approx. 7,300 spindle hours since) Technical Data: - Control: Siemens 840D (PCU50, NCU572.4) - NC swivel head - Travel paths: X 6,000 mm / Y 630 mm - Rapid feed: X / Y / Z = 60 m/min - Motor spindle: 12,000 rpm, 140 Nm - Tool change time (chip-to-chip): 3.0 sec (vertical), 4.7 sec (horizontal) - Tool magazine: 92 tool positions, HSK-A63 Find more here - / Contact us at -

Manufacturer: SW Model: BA-W 06-22 Year of Manufacture: 2007 Control: Siemens 840 D Technical Details: - Spindle Distance: 600 mm - Travel X: 600 mm - Travel Y: 600 (975) mm - Travel Z: 500 mm - Travel A: 600 mm - Max. Rapid Traverse Speed (X/Y/Z): 45 m/min - Tool Holder: A63 HSK - Tool Magazine: 2 × 72 tools - Spindle Speed: 17,500 rpm - Drive Power: 38 kW - Weight: 18,000 kg Equipment: - 2-fold tool changer - 2 NC-controlled swiveling units for clamping bridge - 2 NC-controlled swiveling units - 4 NC-controlled rotary tables - KNOLL cooling unit - IKZ high-pressure pump 70 bar - Chip conveyor - Additional control panel for tool management Find more here - / Contact us at -

Type: Ultrix 800 RT A high-end 5 interpolated axes multitasking machining centre. Designed for the highest performance in machining 3D shapes that require turning, milling, drilling and grinding.nbsp;Tailored to applications ranging from complex gears, impellers to molds, dies, tools,... for projects in aerospace, automotive, power generation,... max workpiece diameter: 900 mm A-axis: -30° / 110° C-axis: continuous max distance between spindle and table: 650 mm Options fitted to machine: 1 - high speed spindle of 40 000 rpm 2 - table with diameter 700 mm 3 - toolchanger with 150 positions 4 - chipconveyor 5 - coolant system with recuperation 6 - temperature regulation for coolant 7 - high pressure cooling (40 to 70 bar) through spindle 8 - smoke extraction system 9 - chip collection box 10 -nbsp;presetting system and tool integrity 11 - Renishaw measuring probe X-axis: 800 mm Y-axi ...

Technical details shown on picture. Parts shown by hand not come.

CNC Model: Mazatrol CNC Version: Fusion 640M Tool Attachment: ISO 40 Spindle power: 18.5Kw Number of spindle speeds: 12000 Number of tools: 30 X-axis travel: 760mm Y-axis travel: 410mm Z-axis travel: 510mm Fast feeds for linear axes X Y Z: 36m/min Table dimensions: 1000 x 410mm High refrigerant pressure: yes Chip conveyor: belt :::D DIMENSIONS AND WEIGHT::: Length: 2200mm Width: 2700mm Height: 2700mm Weight: 4920Kg

Mazak Integrex 200 Y, 20 tool positions, x,y,z = 530,140,1065. 30 kW spindle motor, 35-4500 rpm, chuck size 210 mm, through-hole diameter 61 mm, under power

Center height: 230mm, turning diameter over bed/cross slide: 460mm/270mm, spindle bore: 62mm, distance between centers: 1000mm, threading range inch: 4-80 TPI. The machine has been retrofitted with a digital display. An on-site inspection is possible.

Manufacturer: AUERBACH Model: AX3 TLF Year of Manufacture: 2011 Technical Specifications - Total Weight: 15 t - Wiring Diagram: Included (Dok) - Assembly Diagram: Included (Dok) - Temperature Range: +5 °C to +40 °C - Power Supply: 3-phase ~ 50 Hz - Rated Voltage (Main): 400 V - Control Voltage: 24 V DC - Auxiliary Voltage: 230 V AC - Connected Load: 46 kW - Rated Current (Machine): 87 A - Current of Installed Devices (Normal Operation): 100 A - Supply Cable Protection: 041 – 045 Find more here - / Contact us at -

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, No. of regulating wheel speeds: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.5 ...

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, No. of regulating wheel speeds: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.5 ...

- Control: SIEMENS SINUMERIK 840-C - Max. rod Ø: 65 mm - C-axis - Turntable main spindle: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Revolver 2: 8 stations, 4 of which are powered - Speed applied Operating time: 4,000 1/min - Both turrets with internal cooling - High-pressure system -Conveyor - Bar feeder IRCO SiMag 65 - Max. rod length: 3200 mm Dimensions LxWxH: - Machine 3400 x 1700 x 1800 mm - Bar feeder 4000 x 1000 x 1400 mm - Chip conveyor 3000 x 1100 x 1600 mm Total weight: approx. 6,000 kg

A lathe Meuser with defective return is available. Center height: 185mm, distance between centers: 700mm, swing over bed/cross slide: 370mm/200mm, bed width: 320mm, spindle bore: 47mm, speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/1400mm, weight: approx. 1500kg. An on-site inspection is possible.

Process: centerless plunge grinding, max. workpiece diameter: 20mm, max. workpiece length: 80mm, without automation by vibratory bowl. An on-site inspection is possible.

Mazatrol Matrix Control Max. turning diameter 530 mm Max. machining length 500 mm Max. bar passage 52 mm Travel X/Y/Z 450/200/550 mm Main spindle max. speed 5,000 rpm C-axis Milling spindle max. speed 12,000 rpm B-axis -30°-190°, 1° indexing Capto C6 Tool Holder Tool magazine with 72 tool positions Max. tool diameter 90 mm Max. tool diameter with free secondary positions 125 mm Max. tool length 210 mm Tailstock MK5 Automatic Parts Catcher (D:65 x L:120 x 2.5KG) Automatic Tooleye Conveyor Cooling by the spindle, 70 bar Coolant system with 70 bar high-pressure pump and paper belt filter Milling spindle synchronized threading Rapid traverse stylus angle of inclination during movement Cylinder (G07) + Polar Interpolation (G12.1) Signal lamp 1 pcs Irco Bar Feeder ILS-MUK-7012 -Max. rod length: 1,200 mm 1 pc oil mist extraction

Key data: 300 mm

Lathe CNC turning center with 2 spindles Emco Hyperturn 45 Year of manufacture 2018 Switch-on hours: 25,386 h Ready for operation (automatic mode): 17,035 h Production operation: 8,619 h Original price: 270.000,- € net Current leasing rate: 2,629 € Chip conveyor Bürener SPE 63/12-225 Year of construction 2018 Bar loading magazine TOP Automazioni ETL8-50 12-speed tool turret Powered tools on both turrets Y-axis Automation with EMCO bar feeders, swivel loaders or gantry loaders EMCONNECT - Digital Process Assistant (Sinumerik ONE) WORKSPACE Travel in X/Y/Z 160 (150)/70/510 mm Max. bar passage 45 (51) mm Max. turning diameter 300 mm Circumferential diameter over bed 430 mm Rapid traverse speed X/Y/Z 30/15/45 m/min MAIN SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. torque 100 Nm SUB-SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. t ...

A conventional center lathe is available. An on-site inspection is possible.

CNC machining center brand AWEA 1460 BM Year of Make: 2014 Power-on hours: 16656 Spindle Hours: 7073 Single-shift operation/KD-maintained X=1460mm Y= 600mm Z=620mm 40x Random Changer 30 KW spindle power Control: Heidenhain 530 Handwheel: Heidenhain Heidenhain Measuring Rulers Sealing air on measuring rulers IKZ= 30 bar Exterior cooling Cabin flushing Spindle: 10,000U/pm Large coolant tank and filter Large side doors Machine can be viewed on site by arrangement under Chip!

PosMill H500U, a five-axis simultaneous machine, for sale. Year of construction 2018, the spindle has just over 5000 operating hours. Attached are pictures of the machine. The machine is currently in operation, but can be available immediately by arrangement. • Tool magazine for 60 tools • IKZ plus air

Manufacturer: LINEMATIC Model: LM34/705 Year of Manufacture: 2004 Power: 14 kW Voltage: 400 V, 20 A, 50 Hz Phase: 3-phase + Neutral + Protective Earth CE certified Find more here - / Contact us at -

Manufacturer: LINEMATIC Model: LM34/725 Year of Manufacture: 2005 Power Requirement : 17 kW Voltage (VOLTS): 400 V Current (AMPS): 24 A Frequency (FREQ): 50 Hz Phase (PHASE): 3P + N + PE (Three-phase with Neutral and Protective Earth) CE marked Find more here - / Contact us at -

Manufacture: Linematic Model: LM34/949 Year of Manufacture: 2015 Power Requirement: 12 kW Voltage: 400 V Current: 16 A Frequency: 50 Hz Phase: 3P + N + PE Certification: CE Find more here - / Contact us at -

Manufacturer: LINEMATIC Model: LM34/882 Year of Manufacture: 2012 Power Requirement: 28 kW Voltage: 400 V Current: 40 A Frequency: 50 Hz Phase: 3P + N + PE Certification: CE Find more here - / Contact us at -

Manufacturer: Elumatec Model: SBZ 122/31 Year of Manufacture: 2007 Type of Machine : Bar Processing Center Processing Length: 3750 mm with bar support / 3500 mm without Axis Travel: X = 350 mm, Y = 280 mm, Z = 300 mm Speed: 30 m/min positioning speed (all axes) Accuracy: ±0.1 mm Spindle: 6 kW, 21,000 rpm, HSK F63 Tool Stations: 5 Max. Tool Diameter: 200 mm (manual), 92 mm (automatic) Max. Saw Blade Diameter: 500 mm Air Consumption: ~50 l per cycle Compressed Air Requirement: >7 bar Power Supply: 400 V, 3-phase Find more here - / Contact us at -

Kolmag brand machining center Woodworking machines Model T35 Serial number K3426 Year of construction 2020 The machine does not have all accident prevention documentation (EC declaration of conformity, use and maintenance manual). Operation not verified as it is disconnected from the electrical voltage. ASSET INTENDED FOR SECTOR TRADERS, AFFILIATED OUTSOURCERS, MANUFACTURERS AND SCRAP DEALERS.

A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible.