mikron ag used for sale

Agilent Stratagene Mx3000p 96-Well qPCR System Real-time quantitative qPCR system The Agilent Stratagene Mx3000P system is a complete, high-performance instrument designed for basic experimental protocols and providing the flexibility needed for more advanced applications. The Mx3000P qPCR system puts real-time instrumentation at the fingertips of researchers on a budget. Excitation Source: Quartz Tungsten Halogen Lamp Detector: 1 scanning photomultiplier tube (PMT) Multiplexing capability: 4 targets in the same tube Excitation range: 350 nm – 750 nm Emission range: 350 nm – 700 nm Temperature uniformity: ± 0.25 °C to 72 °C Temperature rise rate: up to 2.5 °C/s Temperature range: 25 °C – 99 °C Dimensions: 35.6 cm (W) x 50.8 cm (D) x 45.7 cm (H), weight: 20.4 kg With MXPRO 3.00B software for Windows 2000 or XP Without a computer RS232 cable-free Un ...

AGFA ADAMAS 125 COU ( Clean out unit ) Washer for Adamas printing plates. Excellent condition, little used. online version without tables. Stock! AGFA ADAMAS 125 COU ( Clean out unit ) washer for Adamas processing. Excellent condition, was very rare in use. Online version without infeed and outlet. Processor is on stock and can be inspected on appointment.

Agilent AriaDx Real Time PCR Thermal Cycler K8930AA Year of manufacture: 2021 Model: K8930AA With computer (ARIADX software installed) Without cables Excitation source: 8 dye-specific LEDs per optical module Detectors: 8 photodiodes Reaction volume: 10 to 30 μl Compatible chemistries: SYBR and TaqMan Thermal system: 6 Peltier modules (25.0 to 99.9 °C) Heating speed: 6.0 °C/s Cooling rate: 2.5 to 3.0 °C/s Thermal accuracy: ± 0.2 °C Thermal uniformity: ± 0.4 °C Data acquisition time: < 3 seconds for all channels Power supply: 100-240 V AC, 50/60 Hz Frequency: 1100 Hz Dimensions: 50 cm (W) x 46 cm (D) x 42 cm (H) Weight: 23 kg Sample Containers: 96-well plates, strip tubes, 0.2 mL tubes Operating conditions: 20 – 30 °C, relative humidity: 20 – 80 % (non-condensing) The device is fully functional, but the intervention of an AGILENT technician is necessa ...

Agilent AriaDx Real Time PCR Thermal Cycler K8930AA Year of manufacture: 2021 Model: K8930AA Without a computer Without cables Excitation source: 8 dye-specific LEDs per optical module Detectors: 8 photodiodes Reaction volume: 10 to 30 μl Compatible chemistries: SYBR and TaqMan Thermal system: 6 Peltier modules (25.0 to 99.9 °C) Heating speed: 6.0 °C/s Cooling rate: 2.5 to 3.0 °C/s Thermal accuracy: ± 0.2 °C Thermal uniformity: ± 0.4 °C Data acquisition time: < 3 seconds for all channels Power supply: 100-240 V AC, 50/60 Hz Frequency: 1100 Hz Dimensions: 50 cm (W) x 46 cm (D) x 42 cm (H) Weight: 23 kg Sample Containers: 96-well plates, strip tubes, 0.2 mL tubes Operating conditions: 20 – 30 °C, relative humidity: 20 – 80 % (non-condensing)

AGIE CHARMILLES FO 350SP die-sinking EDM was built in 2013 in China by Beijing Agie Charmilles Co., Ltd. The machine is in very good condition, fully operational and regularly serviced throughout its service life. The AGIE CHARMILLES FO 350SP is used in the production of precision tools, moulds, dies or punches. The machine uses an electrical erosion method that enables complex shapes to be made in even the hardest materials. This method also minimises or completely eliminates the need to undertake additional finishing processes, such as polishing. The machining process is performed in a dielectric-filled work tank. The use of dielectric increases the surface quality and dimensional accuracy of the workpieces, and its level and working pressure are continuously monitored by an advanced measurement system. The work table, in turn, has T-slots for fast and easy clamping of workpieces. A ...

AGIE CHARMILLES FORM E 600 die-sinking EDM was built in 2024 in China by Beijing Agie Charmilles Co., Ltd. The machine is designed for precision EDM machining of workpieces with a maximum weight of 1000 kg. Electrical discharge machining enables complex shapes to be made in even the hardest materials, as well as minimises or completely eliminates the need for further finishing processes, such as polishing. The AGIE CHARMILLES FORM E 600 is a state-of-the-art solution for companies looking for high efficiency, precision and low operating costs. The stable design is based on a rigid ‘C’ shaped frame and a cross table that performs movements in the X and Y axes. Precise positioning in all linear axes is ensured by servo drives that work with ballscrews, encoders and measuring scales with a resolution of 0.1 μm. The accuracy of the movements is additionally controlled with a laser in ...

AGIE CHARMILLES CUT 30 P wire EDM was built in 2012 (launched in 2013) in China by Beijing Agie Charmilles Co., Ltd. The machine is designed for the production of precision dies, cutting dies, punches and other parts with complex geometry. Workpieces with a maximum weight of 1000 kg are machined by means of electrical discharge machining, which enables the creation of complex shapes even in the hardest materials. The process involves the removal of material by means of controlled electrical discharges between the wire and the workpiece submerged in a dielectric. This results in a high-quality surface finish without the need for additional finishing operations, such as polishing. The AGIE CHARMILLES CUT 30 P performs machining with a cutting head that moves in the X, Y and Z axes with feeds of 600 mm, 400 mm and 350 mm respectively. Maximum cutting accuracy is ensured by a HANS SCHMIDT ...

frequency: 50 Hz weight: 3000 kg voltage: 3 x 400 V output: 8,3 kw ampere: 12 Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 pieces of driverless transport systems, SAFELOG. AGV M4 – used - : Price per piece: 12.500.-€ (net)! Manufacturer: SAFELOG GmbH Type: AGV M4 Year of Make: 2021 Incl. inductive charging point and wireless station Manufacturer data: Forward and reverse travel possible Wear-free charging in the process using an inductive charging system Scalable battery capacity from LiFePo4 batteries to adapt to Process Requirements Low-profile design with a height of only 220 mm — ideal for driving under 7" touch display for easy handling Agent-based control for communication between AGVs and their environment Electric lifting pin for automatic pick-up and drop-off of trailers up to 1.5 t Travel speeds from 0.02 m/s to 1.6 m/s Hybrid navigation of magnetic track, contour navigation, camera navigation and odometry Safety laser scanner in every direction  ...

This 5-axis AGIE Agiecut Challenge 2 wire EDM machine was manufactured in 2002. It has a weight of 3600 kg and operates at a power of 9 kVA. The machine includes additional equipment such as an ICS Cool Energy i-Chiller external cooling unit and a standalone operator console terminal with screen, keyboard, and mouse. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Agiecut Challenge 2 machine we have for sale. Contact us for further details.

ECKERT AGAT SPEED 6000x2000 oxy-fuel cutting machine was built in 2019 in Poland by ECKERT AS Sp. z o.o. The machine is designed for the precision oxy-fuel cutting of sheet metal, enabling the production of high-precision and repeatable components. Machining is performed by a HARRIS oxy-fuel torch based on pre-programmed cutting programmes. A support with a capacitive distance sensor maintains the correct torch height above the workpiece, ensuring a stable process. The 6000 x 2000 mm work space enables the machining of larger workpieces, whilst the machine’s open design ensures convenient access to the work area from all sides. The ECKERT AGAT SPEED is operated via the intuitive ECS 872 CNC controller with a touchscreen. The machine is also equipped with CAD/CAM software, which streamlines project preparation and the management of the sheet metal cutting process. Technical specif ...

WE OFFER A VERY NICE MACHINE WITH COMPLETE TOOLS ACCESSORIESS. MACHINE IS PERFECT WORKING CONDITION, MACHINE IS IN VERY NICE CONDITION IT HAS NEW SPINDLE 3 MONTHS AGO TOTAL WORKING HOURS :11296 H 17min DATE OF INSPECTION: 09.06.2023 PART COUNT : 61849 MACHINE IS ON POWER WORKING IN THE PRODUCTION OF PLASTIC COMPONENTS. MACHINE WAS USED ON METAL ONLY COPLE DAYS PER YEAR. TECHNICAL DATA: CONTROL: FANUC 0iMF SPINDLE TAPER SK: 50 TRANSMISSION: GEAR SPINDLE SPEED 6000 RPM TABLE SIZE: 2400 X 1000 TABLE LOAD MAX: 4000 KG TRAVEL: X: 2200 mm Y: 1000 mm Z: 800 mm MAFAZINE CAPACITY: 24 TOOLS MACHINE HEIGHT : 3600mm MACHINE DIMENSION: 5700 mm x 3900 mm WEIGHT 20.000 KG MACHINE IS AWAILIBLE IMEDIATELY DIRECT FROM THE FACTORY

Compact cascade extruder - 1x extruder with 80 mm screw diameter - 1x extruder with 70 mm screw diameter - Vacuum degassing or atmospheric - Control cabinet / control for both extruders - Extrusion nozzle

Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.

Haug AG35 generator charging unit, for making products static or antistatic, See soecificationa in the pictures

Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Technical data: Cutting length: max. 380 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

table length: 600 mm table width: 400 mm x-axis: 400 mm y-axis: 300 mm z-axis: 350 mm workpiece sizes: 900 x 630 x 350 mm volume: 490 L total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AgileX's SCOUT 2.0 is a robust and versatile expandable 4WD UGV platform for research, development and integration of autonomous robotic systems. Four individually driven wheels, a double wishbone suspension and a payload of up to 50 kg provide a stable basis for LiDAR systems, cameras, industrial computers, manipulators and application-specific sensors. The platform can rotate on the spot, handle slopes of up to 30 degrees and overcome obstacles of about 100 mm in height. CAN interface, power connections, T-slot profiles and an open SDK enable the flexible connection of your own control, sensor and computer systems. The SCOUT 2.0 is CE certified. Typical applications: - Research and development of autonomous systems - Sensor carriers for LiDAR, cameras, GNSS and IMU - Mobile manipulation (combination with robotic arm) - Inspection and outdoor operations Technical data: - Drive: 4WD, ...

The SCOUT MINI is a compact and dynamic 4WD platform for research, development and mobile robotics. The low dead weight and compact dimensions facilitate transport, test setup and use in laboratories, halls and suitable outdoor areas. Four independently driven wheels and swing arm suspension ensure high manoeuvrability and good ground contact. Depending on the configuration, the platform is available with standard wheels for differential travel or with Mecanum wheels for omnidirectional movement. CAN 2.0B, open SDK and ROS packages enable the integration of your own control, navigation and sensor systems. Typical applications: - Research and development - Robotics training on real hardware - SLAM, navigation and sensor fusion - Use in laboratories, halls and suitable outdoor areas Technical data: - Drive: 4WD, four independently driven wheels - Suspension: swing arm - Wheel variants: ...

The HUNTER SE is a compact mobile platform with Ackermann steering for research and development projects in the field of autonomous driving. The vehicle-like kinematics enable easily reproducible motion control and are particularly suitable for longer distances and higher driving speeds. The robust steel construction, a payload of up to 50 kg and the upper mounting surface allow the integration of LiDAR, cameras, GNSS, IMU and additional computers. CAN bus, open SDK and available software packages support the development of own control and autonomy systems. Typical applications: - Research and development in the field of autonomous driving - Vehicle-like navigation attempts (Ackermann kinematics) - Sensor carriers for LiDAR, cameras, GNSS and IMU - Longer driving distances and higher speeds Technical data: - Steering: Ackermann (vehicle-like kinematics) - Construction: Steel - Payload ...

The TRACER 2.0 is a particularly flat AGV base platform for in-house material handling and the development of in-house AMR and intralogistics solutions. With an overall height of only 169 mm and a payload of up to 150 kg, the platform can be easily integrated under transport bodies, container carriers or customer-specific modules. The two-wheeled differential drive enables rotation on the spot and thus efficient maneuvering in aisles, on shelves and between production stations. Two 400W brushless motors provide a top speed of up to 2.0 m/s. Note: TRACER 2.0 is an open base platform and not a fully autonomous vehicle. Navigation, safety sensors and higher-level control are supplemented according to the respective application. Typical applications: - In-house material transport - Development of own AMR and intralogistics solutions - Basis for transport bodies and container carriers - Au ...

The BUNKER MINI 2.0 combines compact dimensions with the traction of a tracked chassis. The platform is designed for inspection, measurement and research applications in confined areas as well as on uneven outdoor surfaces. Two independently controlled 250 W motors drive the chains and enable rotation on the spot. With a payload of up to 25 kg, the platform offers sufficient reserve for sensors, computers, additional power supply and light manipulators. The IP67 rating, CAN interface, and a power output for external devices provide a robust foundation for custom robotics systems. Typical applications: - Inspection and measurement applications - Research in confined areas and on uneven terrain - Outdoor use (IP67 protection) - Carriers for sensors, computers and light manipulators Technical data: - Chassis: Chain, two independently controlled drives - Motors: 2x 250 W - Payload: up to ...

The LIMO PRO is a compact research and development platform for ROS 2, autonomous navigation and AI-based robotics applications. NVIDIA Jetson Orin Nano, EAI T-mini Pro LiDAR, and an Orbbec-Dabai depth camera provide a powerful foundation for sensor fusion, SLAM, object recognition, and autonomous navigation. The chassis supports four different movement concepts: differential drive, Mecanum wheels, Ackermann steering and chain drive. This allows different kinematic models to be examined on the same platform without the need for a second robot. Typical applications: - Robotics education at universities and educational institutions - ROS-2 development and teaching - SLAM, object recognition and autonomous navigation - Comparison of different kinematics on one platform Technical data: - Calculator: NVIDIA Jetson Orin Nano - LiDAR: EAI T-mini Pro - Depth camera: Orbbec Dabai - Drive types ...

AgileX's PiPER is a lightweight robotic arm with six degrees of freedom for research, teaching, and rapid prototyping. With a dead weight of only 4.2 kg, the arm can be mounted on a table, a demonstration setup or directly on a mobile platform. It carries up to 1.5 kg, reaches a reach of 626 mm and operates with a repeatability of 0.1 mm. Integrated articulated drives ensure smooth movements. It is controlled via Python API, ROS 1 or ROS 2. The CAN interface makes it easy to connect to a higher-level computer, image processing system, or gripper. The temperature range of -20 to 50 degrees Celsius specified by the manufacturer allows tests to be carried out even outside of classic laboratory conditions. Typical applications: - Research and teaching at universities and educational institutions - Rapid prototyping of handling tasks - Pick-and-place tests with image processing - Mobile ma ...

Agilent 1200 HPLC system consisting of: Agilent 1200 G 1312B SL binary HPLC pump (up to 600 bar) Agilent 1200 G 1315B Diode Array Detector Agilent 1200 G 1316 B TLC SL Colcom/column thermostat Agilent 1200 G 1379 Degasser Agilent 1200 G 1330 Thermostat for Autosampler Agilent 1200 G 1367D Autosampler Hip ALS SL + on request with Agilent Chemstation/Warranty

Agilent 5973 MSD Detector,Network/LAN Connector, Diffusion pump, completely overhauled

Agilent 5973N inert MSD with GC Agilent 6890 N Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently serviced/with warranty Installation on request

Agilent 5973 N MSD Detector with Edwards turbomolecular pump or diffusion pump, used and refurbished on request also complete as measuring station with Agilent 6890GC Please inquire about the price per piece

Agilent G 1362 A RID Detector Refractive Index Range 1.00-1.75 RIU Measurement Range +/- 600x 10-6 RIU Sample Cell 8 ul Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN

Agilent G 1321A Fluorescence Detector Ex Monochromator range 200 – 700 nm Em Monochromator range 280-900 nm Wavelength characteric Repeatability +/- 0.2 nm Accurcacy +/- 3 nm Flow cell 8μl Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN Remote: ready, start, stop and shut down signals

AGIE AGIETRON HYPERSPARK 2 HS die-sinking EDM machine was built in 2008 in Switzerland by AGIE SA. The machine is designed for the production of precision dies, punching dies, punches and other elements with complex geometry using the electrical erosion. This technology enables the machining of workpieces made from difficult-to-machine and hardened materials, and also reduces or completely eliminates the need for further finishing operations, such as polishing. Electrical discharge machining is performed in a tank filled with a dielectric fluid, which affects the surface quality and dimensional accuracy of the machined workpieces. All process parameters are entered in an intuitive CNC controller, which facilitates the daily operation of the machine. The AGIE AGIETRON HYPERSPARK 2 HS sinker EDM is offered with tooling. The total weight of the EDM machine is 2800 kg. Technical specifica ...

for 25 hp tractors ,normal PTO 540 rpm ,instruction manual , replacement catalog ,

Hydraulic Unit Weinig 1

Alfa Laval UVPX 307 AGT 14 Separator Centrifuge Oil Fish, Olives 5750l/h Motor 5.5 kW

max. film width: cm max. speed: /h serial no.: 55C P0009 inlet width: 55 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic aggregate Weinig 2

Block- und Broschüren-Drahtheftmaschine Pad and Booklet Wire Stitching machine Drahtheftmaschine / Wire Stitching Machine AGRAFIX BX Serial-No. 1268 1 Drahtheftmaschine für Block- und Sattelheftung. 1-head wire stitcher for block- and saddle stapling.

This 3-axis Sodick AG40L LN2 was manufactured in 2015. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 270 mm. The machine has been operated for 13,161 hours and is currently connected and available for inspection/testing. If you are looking to get high-quality die-sinking capabilities, consider the Sodick AG40L LN2 machine we have for sale. Contact us for further details.

max. film width: 355 mm max. speed: 0 /h serial no.: 8518 voltage: 100-240 V frequency: 50-60 Hz weight: 150 kg dimensions of press (L x W x H): Belichter 75 x 85 x 100 cm dimensions of press (L x W x H): RIP 70 x 50 x 70 cm repeating accuracy: +/- 25 µm RIP included up to 3000 dpi Red laser diode max. page width 355 mm max. 200 lpi screen ruling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. film width: 356 mm max. speed: 338 qcm/min Dimensions (L/W/H): 85x75x100 cm repeating accuracy: 25 µm material: Materialvorrat 76 m weight: 162 kg max. exposure length 2000 mm Resolution max. 2400 dpi red laser diode 670-680 nm point sizes 20-35 µm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Erodiermaschine, gebraucht Baujahr: 1989 Bitte kontaktieren Sie uns für weitere Informationen und Bilder über mail(at)tar-mc.com oder www.tar-mc.com

Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10

Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm

X, Y, Z Travel :600x400x400 mm Machine dimentions WxDxH : 1600x2700x2858 mm Machine weight :440 kg Workpiece dimentions WxDxH :1000x700x400 mm Max. electrode weight :100kg Max. Workpiece weight 1000 kg Can be inspected under power

Agilent GC 6890N, Detector WLD Option: Extension with FID Injector: Split/Splitless with EPC LAN connection Agilent Chemstation B04.03

Demonstration-ready machine equipped with loading system. Specifications Grinding spindle motor 2.2 kW Control spindle motor 0.25 kW Coolant pump engine 0.2 kW Grinding wheels Ø max. 150 min. 120 mm Bore - Ø 50 mm Grinding wheel width up to 50 mm Control discs Ø max. 100 mm Bore - Ø 40 mm Regulating disc width up to 50 mm Workpiece Ø 0.1 mm – 10 mm Max. workpiece length for plunge grinding 50 mm Smallest regulating disc slide feed 0.001 mm Circumferential speed of the grinding wheel 25 / 35 / 50 m/s Circumferential speed of the regulating disc 6-94 m/min During dressing 143 m/min Accessories: AAG loading system "HF120" (Agathon patent), coolant basin The machine can be viewed by appointment in our factory in Krefeld. Price ACTUAL condition from stock: on request – Errors, changes and prior sale excepted –

Key data: 400 mm, 180 mm

Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.

Agilent 7890A +5975C+7683(100 tray) with SSL + PTV inlet. And with pump. Agilent 7890A +5975C+7693(150 tray) with SSL + PTV inlet. And with pump. Both in very good condition.

1. Agilent 720 ICP, MOF 2014. In very good working condition. Complete set with all necessary accessories like the chiller, Pump and computer software.