We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,921 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Computer monitor, screen, TFT industrial monitor -Monitor: TFT industrial monitor from CNC milling machine Mikron UME 600 -Type: 12.1 TFT industrial monitor 2363130 -Dimensions: 400/320/100 mm -Weight: 3.1 kg
used
X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much.
used
PLC control, power module, LT module, E/R module, feedback module, CNC control, safety insert universal module plug-in cards, circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Security slot: type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg
used
This Mikron VCE750 Vertical Machining center was manufactured in the year 1994. It is equipped with a Mikron control unit and has 3 axis.
used
This Mikron WF-31C Universal Machining center was manufactured in the year 1986. It is equipped with a MIKRON control unit and has 3 axis. The machine has a spindle speed of 31,5-3150 rpm.
used
Key data: 1015 mm, 510 mm, 675 mm
Machine Details Stock-No. 1105-03923 Type of machine Machining Center - Vertical Make MIKRON Type VCE 1000 Pro Year of manufacture 2006 Type of control CNC Storage location FRANCE Country of origin Switzerland Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details x-travel 1015 mm Y-Travel 508 mm Z-Travel 675 mm CNC-control Heidenhain iTNC 530 max. distance between table and spindle-nose 775 mm table-size 1020 x 620 mm max. table load 1000 kg spindle taper ISO 40 spindle turning speed range max. 14,000 rpm Feed stepless 24 / 24 / 20 mm/min Rapid Traverse 24 / 24 / 20 m/min drive capacity - spindle motor 18 kW tool change unit 24 Pos. voltage 400 V total power requirement 35 kVA Weight of the machine approx. 5 t dimensions of the machine approx. 2.86 x 2.60 x 2.70 m Additional information MIKRON VCE 1000 PRO - 3-D Measuring butt ...
used
PLC control, power module, LT module, E/R module, feedback module, CNC control, safety insert universal module -Manufacturer: Mattle, safety insert universal module made from CNC milling machine Mikron -Type: SEMU 31TN -Board: Mikron 810.00.00.277 S300 -Dimensions: 300/160/H200 mm -Weight: 1.4 kg
used
Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm -Dimensions: see photos -Dimensions: 870/140/H130 mm -Weight: 18kg
used
Universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / techn. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg
used
Rotary table, rotary dividing table, dividing head, dividing head, NC rotary table, fourth axis, 4th axis -Manufacturer: Mikron, NC rotary table type SMP from CNC milling machine Mikron WF 51C/155 -Clamping surface: Ø 630 mm -Groove width: 14 mm -Motor: Siemens 183V 1.8 kW see photo nameplate -Dimensions: 630/630/H495 mm -Weight: 409 kg
used
CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit from CNC milling machine Mikron UME 600 -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/240/H160 mm -Weight: 5.3 kg
used
Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -for: max. 22 shots -Intake: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg
used
Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW see photo nameplate -Speed: 1500/9000 rpm -Spindle head: SK40 mount -Dimensions: 1550/560/H735 mm -Weight: 555 kg
used
PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm -Weight: 0.4 kg
used
Auxiliary circuit breakers, circuit breakers, circuit breakers, load disconnectors, load disconnectors, circuit breakers, circuit breakers, auxiliary switches, main switches -Manufacturer: Mikron, main switch switch disconnector from CNC milling machine Mikron UME 600 -Adapter: Heidenhain Type: 239 758 01 -Dimensions: 430/150/115 mm -Weight: 1.1 kg
used
Electronic handwheel, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, HMI panel, hand terminal, hand control panel -Manufacturer: Mikron, hand terminal control panel from CNC milling machine Mikron UME 600 -Connection plug: see photos -Transport dimensions: 400/240/H95 mm -Weight: 1.1kg
used
Gear hobbing machine MIKRON 102 Max. workpiece diameter 120 mm Max. Modul 2 Max. lenght of teeth 130 mm Min./max.nr of teeth 6 – 325 Angle on helical gears 0 – 90 °
used
No. 4614: 1 used Universal milling machine make MIkRON, type WF 31 SA, with HEIDENHAIN TNC 114 work range: 560 x 500 x 400 m Accessories: rigid angle table SK 40 Coolant system Other: Speed range 40-4000 RPM Weight 2450 kg
used
Mikron VCP 800 2007 Built in 2007 Control Heidenhain iTNC 530 Travel X-800mm , Y-650mm , Z-500mm Working spindle: Spindle speed max. 12000rpm. Tool magazine: Number of tool slots 36 Machine table: Clamping area 800 x 650mm Accessories: Inner coolant supply - Belt filter system 20Bar Conveyor
used
CNC milling machine make MIKRON type WF 21 CYear of construction 1986Travel X-axis: 400 mmTravel Y-axis: 400 mmTravel Z-axis: 400 mm21 speeds continuously: 31.5 - 3150 rpm.Tool holder: ISO 40 M 16with insertion grooveQuill movement vertical: 90 mmFeed rate in all 3 axes: 2-3000 mm / minRapid traverse speed X- and Y-axis: 6000 mm / minRapid traverse speed Z-axis: 5000 mm / minelectrical connection power: 8.7 kWDimensions: 2900 x 2650 x 2000 mmWeight approx: 2300 kgWith- rigid angle table- CNC control Heidenhain TNC 155used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Universal milling machine make MIKRON type WF 2/3 DPwith positioning and path control HEIDENHAIN TNC 121Year of construction 1981Longitudinal path X: 400 mmTransverse Y: 400 mmVertical path Z: 575 mmSpindle mount: ISA 4024 spindle speeds: 30 - 2240 rpm.Feed rates steplessly all directions: 1 - 750 mm / min.Rapid traverse in all directions: 1500 mm / min.Drive power: 6 kWWith- autom. Clamping- quill stroke- swiveling vertical milling head- rigid angle table 450 x 800 mm- Steering control HEIDENHAIN TNC 121- Manual mode, can be conventionalxa0xa0xa0 be worked with digital display- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Mac ...
used
5 AXIS – CNC GEAR SHAVING MACHINE (+ GEAR HARDENING) make : MIKRON CIMA model : H 250 CNC COMPONENTS : outer diameter : 25-250 mm. width (gear) : max. 150 mm. length (shaft) : max. 580:600 mm. module : 0.5 – 5.5. WHEEL : outer diameter : 300 & 350 mm. width : max. 50 mm. swivel angle : (R) 25 & (L) 25. REVOLUTION : wheel speed : 10:750 rpm. component speed : max. 8000 rpm. TABLE : feed speed : 1:1000 rpm. stroke : (R) 100 & (L) 100 mm. swing angle by crowning : max. 3° CUTTING METHODS : plunge. plunge with oscillation ( table feed ). conventional. CNC : 5 axis CNC CONTROL UNIT ( FANUC SERIES 0M-C). POWER SUPPLY power circuit : 3 phase AC380V 50Hz. control circuit : AC 100V & DC 24V. total power : 20 KVA MACHINE WEIGHT : 5000 Kg. AC SERVO MOTOR model 0S (0.55 Kw) AC SERVO MOTOR model 5S (0.9 Kw) AC SERVO MOTOR model 1 0 S (1.8Kw) AC SERVO MOTOR model ...
used
x-travel: 710 mm y-travel: 500 mm z-travel: 500 mm total power requirement: 24 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m M I K R O N (Switzerland) CNC Controlled Universal Milling Machine with Tool Changer Model WF 54 VH CNC Year 1991 Serial No. 5110302 ________________________________________________________ Table travel, X axis, longitudinal 710 mm Table travel, Z axis, vertical 500 mm Milling head travel, Y axis, cross 500 mm Mounting height below vertical spindle, approx. 600 mm NC rotary table 800 mm Resolution of rotary table, C axis 0.001 ° Spindle taper SK 40 Spindle speeds, 3 steps, infinitely variable 10 - 6,300 rpm Feeds, XYZ 2 - 4,000 mm/min Quickfeed, XY 10,000 mm/min Quickfeed, Z 8,000 mm/min Spindle drive, approx. 15 kW Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 7,000 kg Accessories / Special Feat ...
used
Mikron C Axis Machine Table - with Heidenhain control 430 - Siemens server motor - Table: 60 x 110 cm - 4th axis, diameter: 50 cm - Weight: 650 kg Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
used
Talladora de fresa madre MIKRON 122.01
used
CNC tool milling machine MIKRON type WF 21 D CNC path control Heidenhain TNC 355 Masch. No. 5241010 Year of construction 1990 Travel X: 450 mm Y: 400 mm Z: 400 mm Table size 700 x 350 mm Spindle mount ISO 40 Spindle speed 40-4000 rpm. 21 stages Feed rate 2-3000 mm /min. Rapid traverse X and Y 6000 mm/min. Rapid traverse Z 5000 mm/min. Nail displacement 90 mm Distance table - spindle nose max. 450 mm Main spindle drive 3.3 and 4 kW - Splash guard table housing - Coolant device - Central lubrication - Control cabinet fixed to the back of the machine- electronic handwheel - 55103 Hours of switch-on space L x W x H 3000 x 2700 x 2000 mm Weight 2400 kg very good condition; used
used
Manufacturer: Mikron Model: VCP 600 Year of manufacture: 2000 Control: Heidenhain TNC 426 (screen needs to be replaced, for now we are using a PC screen) 3-phases, 400V, 50 Hz
used
MIKRON WF51C/150 universal cnc milling machine Numerical control: HEIDENHAIN TNC 155 Table (mm): 1000 x 500 Strokes (X x Y x Z): 800 x 500 x 460 mm Year: 1985
used
MIKRON 122.01 Gear hobbing machine Max. hobbing Ø straight/helical wheels 40 mm Max. hobbing length 40 mm Number of teeth 2 - 400 Max. module 1 Speed of the mill 250 – 2000 rpm Feed : 0.05 - 0.8 mm/R Helix pitch 15 - 2437 mm Helix angle to the right or to the left 0 - 90° Collet type W12 Weight 280 kg
used
Machining center vertical MILL P 500 U Manufacturer: Mikron Year: 2018 Control Heidenhain ... TNC 640 Clamping table surface ... 350x350mm Axis X ... 500mm Axis Y ... 600mm Axis Z ... 450mm Spindle speed ... 10-20000 rpm controlled axes ... 5 IKZ ... 80bar HSK-A63 Table latch ... 200kg Axis A ... +91/-121° Axis C ... 360° Plate change ... 7 Magazine places... 120 Machine weight... 13000kg L x W x H ... 4280x3920x3340mm The machine is in good condition, possible to test under electricity.
used
GF Mikron 500U VMC, 2020- 5-Axis, HSK, Low Hours, Excellent Condition,Probe Year: 2020 X-axis- 19.68 in (500 mm) Y-axis – 17.71 in (450 mm) Z-axis – 15.74 in (400 mm) B-axis – 65°/+120° C-Axis- 360° endless Spindle drive type- Cartridge Spindle max.- 20,000 RPM Spindle Power at S1-30.8 HP (23kW) Spindle Power at S6-48.2 HP (36 kW) Spindle Torque at S6-88.5 ft. lbs. (120 Nm) Spindle tool interface- HSK-A63 Distance from table top to spindle 5.90 – 21.65 in (150 – 550 mm) Rapid traverse X,Y & Z 1,181 min (30 m/min) Acceleration X,Y & Z .3g (3 m/sq. sec.) Rapid speed B/C 32/112 RPM Tool changer capacity- 60 tools Work table size- 19.68 in (500 mm) Maximum payload on table 440 lbs (200 kg) Typical table height 38.58 in (980 mm) Number of T-slots 7 T-slot spacing- 2.48″ in (63 mm) T-slot dimension- 0.55 in (14 mm) Coolant tank capacity- 158 gal (600 L) ...
used
Mikron VCE 600+ CNC Vertical Machining Center Machine is in very good condition
used
WE OFFER VERY NICE CONDITION - MIKRON WF3 S technical details: X-travel longitudinal 500 mm Y-travel cross 500 mm Z-travel vertical 380 mm spindle speed 12-steps 50-2240 UpM /rpm feed 1-750 mm/min spindle taper SK40 table size 800x445 mm drive capacity 7 kW weight 1650 kg
used
This Mikron VCP 710 Vertical Machining center was manufactured in the year 2002. It is equipped with a HEIDENHAIN TNC 426/430 control unit. The machine has a spindle speed of 20000 rpm.
used
This Mikron Multistep XS Milling machine was made in 2008. It is equipped with a Bosch Rexroth MTX control unit. The machine has a spindle speed of 15000 rpm.
used
Machine Details Stock number 1105-03802 Machine type machining center - vertical Brand MIKRON Type VCP 600 Year of construction 2010 Control type CNC Control heidenhain 430 Storage location FRANCE Country of origin SWITZERLAND Delivery time ready for shipment Freight Base EX WORK Technical details x-travel 600 mm y-travel 450 mm z-travel 450 mm Control heidenhain 430 Table clamping surface 850 x 530 mm Table load 0.40 t Number of T-slots 6 T-slots - distance 63 mm T-slots - width 14H12 mm Spindle speeds - infinitely variable 100 - 20,000 rpm Spindle motor 12,00 kW Tool holder HSK-A63 Tool changing device 30 Tool diameter 90 mm Tool diameter with 2 free spaces 110 mm Tool length - max. 250 mm Tool weight max. 6.00 kg Chip-to-chip time approx. 7.00 sec Feed infinitely variable 0 - 22,000 mm/min Rapid traverse 22.00 m/min Feed force X/Y/Z axis 5000 N Tota ...
used
Vertical machining center Brand: Mikron Type: VCP 1000 Year of construction: 2000 Control: Heidenhain TNC 426 PB Working range: x-1000mm y-750mm z-750mm Clamping surface: 1150 x 750 mm Workpiece weight: max. 1000 kg Drive power: 24 kW at 40 % ED Speed range: 0 – 12000 rpm Recording: HSK 63 Feed: 30 m/min (rapid traverse/working feed) Displacement measuring system: linear arm rods (direct) Tool changer: 60 compartments Weight: approx. 9500 kg With chip conveyor, extraction and IKZ Spindle Step-Tec defective! Already dismantled! The machine can be visited at any time. Again the note that the spindle is defective and must be repaired. This has already been dismantled.
used
This MIKRON Multistar CX 24 Milling machine was manufactured in the year 2003 in Switzerland. Contact us anytime for further questions.
used
CNC vertical machining center MIKRON UCP 710 With path control Heidenhain TNC 426/430 Year of construction: 1998 Travel: X 710 Y 500 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: NC swivel rotary table NCRST 630 600 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots Full protection cabin with sliding doors and interior lighting Electronic handwheel Renishaw Tool Measurement Probe TS 27 R 3D probe infrared Renishaw MP 12 Conveyor Coolant device 4 pcs height-adjustable machine shoes Operating instructions
used
Stock Number: 3815 PROCESSING Manufacturer: MIKRON , Type: HSM 400U Machine NO.: 107.87.00.036, Year of manufacture: 2003 Specifications: Table size Macro Magnum mm Gr. table load 25 kg Longitudinal movement (X) 400 mm Transverse movement (Y) 240 Usable mm Vertical movement (Z) 350 mm Spindle cone HSK-E40 Infinitely variable spindle speeds 0-42,000 rpm Spindle motor 13/10 Kw A-Ash +/- 110 degree B: Ash 360 degrees Tool changer Erowa 99 places Control Heidenhain 530 Fabr. Accessories: Length: 2900 mm + Robot, Height: 2700 mm, Width: 2400 mm, Weight: 5500 kg
used
GF Mikron E 500 U 5-Axis CNC Vertical Machining Center Year: 2018 SPECIFICATIONS: X-AXIS 19.69" Y-AXIS 17.72" Z-AXIS 15.75" # AXIS 5 SPINDLE SPEED 12,000 RPM ATC CAPACITY 30 TAPER BT 40 EQUIPPED WITH: 1k cutting hours Heidenhain iTNC 530 CNC Control Renishaw TS-27R Probe Touch Probe Infrared OMP40 Assortment of Tooling Tool Magazine DT40/BT40 & ISO4 TC Arm Holder For ISO 40 Kinematicsopt (2) Compressed Air Through Spindle Compressed Ball 30 with Base Hem Rotary Tilting Table Hem Linear Glass Scales 500U Conveyor Lift Up Chip Movable Hand Wheel Manual Touch Cycles Heidenhain Manual Pilot Smart NC Heidenhain Manual DIN/ISO Programming Heidenhain
used
Milling machine MIKRON WF 71 D Year of construction: 1990 Control: Heidenhain TNC 355 Travels x = 900, Y = 500 and Z = 500 Condition: fully functional Transport dimensions: approx. H 2100mm x W 2150 mm x L 2500 mm, weight approx. 3500 KG incl. accessories, see picture +Instruction manual +Key
used
Machining center Mikron VCP 1350 :::SPECIFICATIONS::: CNC Model: Heidenhain - CNC version: TNC 426 - Tool connection: HSK 63 - Spindle power: 27Kw Number of spindle revolutions: 24000 - Number of tools: 46 - X Axis Stroke: 1350mm - Y Axis Stroke: 900mm - Z Axis Stroke: 750mm Rapid feed linear axes X Y Z: 30m/min Guides: roller Tilting rotary table: yes Round table type: continuous Table size: 800mm Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 4130mm Width: 3680mm Height: 3150mm Weight: 10100Kg
used
For sale is: 1 piece used tool milling machine Manufacturer: Mikron Type: WF51D Year: 1980 x-travel 800 mm y-travel 500 mm z-travel 460 mm Table size 1000 x 500 mm Spindle holder ISO SK 40 Spindle speeds - infinitely variable 31.5 - 3150 rpm Operating voltage 380 V Control : Heidenhain TNC 355B Rapid traverses 6000 mm/min Quill stroke 90 mm Coolant reservoir electronic handwheel Machine comes with a wide range of accessories, see pictures (incl. tool cabinet). The milling machine can be viewed in our warehouse in 09599 Freiberg.
used
CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/130/H240 mm -Weight: 5 kg
used
PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board -Manufacturer: Mikron, electronic module printed circuit board for operating unit. TCD22 -Type: WW TCD 22 Art.No. 104.73.20.041 -Dimensions cardboard: 410/310/H65 mm -Weight: 0.6 kg
used
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg
used
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Trasfor, transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see photo identification plate -Dimensions: 180/160/H215 mm -Weight: 25.5 kg
used
Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg
used
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power: 4.5kVA -Primary: 3x380V -Secondary: 3x95/165 V -Dimensions: 335/135/H350 mm -Weight: 41 kg