133,684 used machines on RESALE, but how to find them? Machine Search
Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dr ...
Alligator scissors TR250: • Four-sided knives usable • Opening width is continuously controlled via foot pedal Technical data: Total dimensions: 1100 x 700 x 1200 mm Total weight: approx. 350 kg Knife length: 250 mm Max. knife opening: 150 mm Cutting force: 350 kN Cutting power: Round iron 22 mm (ST 37) Main drive: 3 phases: 4 kW (5.5 hp) Cutting strokes p/min: up to 17 / min
Key data: 7 , 10 , 1
Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor with belt drive Control: fixed speed Control: Airlogic² T touchscreen full-color display Refrigeration Dryer: Integrated Performance data Volume flow at operating pressure 9.5 bar 1.15 m³/min Operating pressure min. / max. 5.5 / 10 bar Total power consumption at 9.5 bar / full load 10.0 kW Rated power motor; IP55 7.5 kW Oil quantity 3.7 lt Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1188 m³/h Free fan pressure 30 Pa Sound level 65 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Dimensions and weight Length x width x height 1625 x 665 x 1535 mm Weight 355 kg Compressed air outlet G 3/4 "ig Capacity compressed air tank 270 lt
New laboratory extruder 25/25 LD Extruder Motor - AC Motor 2.2kW Water bath - 1000 mmm Granulator for a strand
Single-screw extruder • Type: 120/28 LD • AC Motor - 75 kw • Screw speed: 150 rpm. • Extruder cylinder: Air-cooled • Degassing zone Sieb changer • Strandhead Water bath: 4.5 m Granulator SG 200 Classic sieve Silo with conveyor fans: approx. 1m3
Key data: 4 , 8
Oil-free scroll compressor Compaction: Spiral compactor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Simple start/stop control Refrigeration Dryer: Integrated, Refrigerant R513A Electric condensate drain included Performance data Volume flow at operating pressure 6.75 bar 0.4 m³/min Operating pressure min. / max. 4.0 / 7.75 bar Total power consumption at 6.75 bar / full load 4.4 kW Rated power motor; IP55 3.7 kW Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 0 / 40 °C ∆ T above cooling medium temperature 0 °C Cooling air requirement 900 m³/h Free fan pressure 30 Pa Sound level 57 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer internally wired Dimensions and weight Length x width x height 1,275 x 690 x 1,450 mm Weigh ...
The blower is installed in a sound insulation hood with base frame, safety valve, check valve and attachmentparts. The drive motor can be designed according to customer specifications. The compressor stage is completely overhauled. You can also purchase only the GM 80 L level. If you have any questions, please call us.
Environmental protection. Improved separation. Also separates stable emulsions. Meets the strictest purity requirements. Highly efficient. Equipment in detail Maintenance indicator Easy maintenance Filtration Polypropylene for free oil particles Activated carbon for unstable emulsions Organoton for stable emulsions Efficiency with activated carbon Max. oil content at outlet 10mg/l Efficiency with Organoton Max. oil content at outlet 5mg/l Technical data Max. compressed air output (medium climate) without dryer & filter 6.3 m³/min Max. compressed air output (medium climate) with dryer & filter 3 m³/min Condensation Tube 2 x 1/2" Water drain 2 x 1/2 " Condensate inlet temperature min. / max. 0 / 60 °C Dimensions and weight Length x width x height 390 x 278 x 428 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Curb weight approx. 5.8. kg ...
Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125 m ...
Kuka Robot KR6 R700 sixx, Mobile SZ AGILUS V2 Year of construction: 2016 Reach: 706 mm Weight: 50 kg Payload: 6 kg Kuka KRC4 compact controller KUKA. SystemSoftware KSS SR 8.2 Kuka SmartPAD 1.0 Kuka connecting cable 7m Dimensions 900 x 1200 x 1850mm Weight 295kg Ideal for training or trade fair
AGILENT HP 6890N System Agilent 6890N Gas Chromatogtaph Single FID detector Single Split/Splitless Inlet Agilent / HP 7683 Injector Agilent/HP 7683 Tray PC with preinstalled Chemstation software Refurbished
Instrument for gas chromatography AGILENT mod. GC/ MS 7890/5975 Including: Agilent 7890GC Agilent 5975 C MSD EI Source and Diffusion pump Injector Tray etc. Refubished
Vertical tank manufactured by aguilar and rooms in stainless steel 316L with a total capacity of 610 liters (500 useful liters). Flat top bottom with folding lid with handle and stirring support (triple-blade propeller type) Conical bottom with discharge through the bottom (DN50 PN10). About 3 posters. General characteristics: Maker AGUILAR AND ROOMS Guy Vertical mixer tank Material Stainless steel 316L Year of manufacture 1995 Weight 150 kg Body Atm design pressure Ambient design temperature Specifications: Volume 500 L (TOTAL: 610 L) Background type Sup. flat - conical inf. Type of agitation Triple-belic propeller Envelope 3 posters Upper bottom tubulatures x1 Lower bottom tubulatures x1 Outer diameter body 850 mm Body thickness 3 mm Body height 1000 mm Body height + backgrounds 1255 mm (TOTAL WITH AGITATION: 1995 mm) Top bottom thickness ...
complete 230kW
available CHILLER Yom: 2012 85kW cooling power incl. Power Panel, Panel for Water preparation
Centrifugal pump of the ZLND series from the manufacturer STERLING SIHI
Wire stitching machine Agrafix BX; good condition; cleaned and tested; Stitching thickness 25mm with the clamp folded down, 40mm with the clamp not folded; block or saddle stitching; Clamp width 14mm; suitable for round or flat wire. Wire stitcher Agrafix BX; good condition; cleaned and checked; max.stitching thikness by clinched staple 25mm, 40mm by stabbed from both sides; flat or saddle stitching; crown width 14mm; used for round of flat wire.
Reference Num.: 3752 Brand: AGFA Type: Dupliphot 740 Available: directly Status: Not in production Location: Deutschland
AGFA CR System CR 85-X: First Processing Station (Workstation) AGFA CR MD4.0 General cassettes and ADCC HR Kassetten_ different sizes 18x24, 24x30, 35x43 (11 pieces)
Collectors' Item! Vertical Reproduction Camera 220V / 2550W / 50-60cycles (Hz) Dims L130 x W120 x H170 cm - 285 kg
Plug, connector, cable socket -Manufacturer: Siemens, connector 11 pieces -Type: AGA67/GDML 2016 GB 1 -Price: complete -Dimensions: 50/30/35 mm -Weight: 0.1 kg/piece
Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg
Electric motor, three-phase motor -Power: 0.3 kW -Speed: 1330 rpm -Construction: B14 -Protection class: IP 65 -Dimensions: 247/140/H200 mm -Weight: 7 kg
Agilent 5975C XL inert MSD with Agilent GC 6890 N GC Agilent 6890 N, Injector Split/Splitless, MSD 5975 C inert XL with EI,Turbopump,Fastscan Edwards Backing Vacuum Pump 1.5 Agilent Productivity Chemstation E02.02 on PC/Win 10 complete with all cables, Option: Agilent Liquid Sampler, Sampler/ CTC or Gerstel MPS 2) The system is ready for installation and ready for operation current service Installation at extra charge on request
Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently maintained/with warranty Installation on request
Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.
Agfa CTP with developer format 103x77, 64 diods, year 2008
REF-2233 COMACO AGM 6 SEAMER WITH NON-MOTORIZED PLATE AND 24-VALVE VACUUM FILLING MACHINE (I) COMACO AGM 6 automatic can seamer with non-motorized compression plate. Can size: ø73mm. Complete with a 24-valve vacuum filling machine (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,400mm.
Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request
Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Machine reamer: Reamer with holder -Diameter: Ø 59 mm -Holder: DIN 219 MK5 -Total dimensions: Ø 59 x 442 mm -Weight: 5.6kg
Used Air Cooled Condensor Güntner AGVH 080.3A/2x4N(D).E, build in 2007. This used Condensor has 8 fans: - kW / - RPM / Ø = 800 / 153600 m³/h Specifications: Our internal inventory No. 7428 Brand Güntner Type AGVH 080.3A/2x4N(D).E Product type Air Cooled Condensor kW 677 (nh3) Number of Fans 8 Air Flow in m³/h 153600 Surface (m2) 2003 Sizes 8100x2300x1800 mm (LxWxH) Remarks | y.o.b. 2007 // Fan: - kW / - RPM / Ø = 800 Amount in stock 2
washout Agfa Azura C 95; good condition; cleaned and tested; new infeed and medium rollers incl. Bearing; suitable for chemical-free negative plate Agfa Azura; Infeed width 200-950mm; Min. Panel length 310mm; Panel thickness 0.15-0.30mm; Inlet and outlet table. Cleaning unit Agfa Azura C 95; good condition; cleaned and checked; new infeed and middle rollers incl.bearings; used for chemfree negativ plate Agfa Azura; Einfeed width 200-950mm; Min. plate lenght 310mm; plate thikness 0,15-0,30mm; infeed aand outfeed table.
New hood unit 80 kva. Engine FPT ( Iveco ) 2 years warranty Available for immediate delivery.
CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...
CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...
maximum number of results exceeded
please refine your search
