mikron 400 u used for sale

Used BOSCH GKF 400S capsule machine. New 1999. The device is technically efficient, very little used. Equipment dedicated to #0 capsules Areas of application of the GKF device: - Depending on the execution method, the GKF 400 capsule filling and closing device is used to fill capsules with powders, granules. - The machine is designed for a maximum throughput of 400 capsules per minute. The device was used in the GMP area. Made of stainless steel. Simple operation, very simple maintenance.

centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. flow rate: 5.0 m³/h -Pressure: max. 25 bar -Motor power: 3 kW -Speed: 2840 rpm -Housing and impeller made of: stainless steel -Weight: 45 kg

Press 400x600 make ZDA Type 100660 manualy operated electrical heated plates Clamping force 1540 kN

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment Stable 50 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring blade with 1 ...

Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm

Kitzinger crate dishwasher / instantaneous dishwasher - Type: Contino 400NDB1 - Year of construction: 2007 - Bandwidth approx. 70cm - Height entrance: 53cm - Total length: 685cm

Nibbel, stamping and forming center with C frame (C – Frame stress-free annealed before mechanical processing – 15-year warranty on freedom from cracking) All with one machine: Nibbling – Stamping – Forming – Embossing – Tapping – Marking – Deburring Servo-electric punch head drive - up to 950 strokes per minute, adjustable depending on the material feed speed. Maximum punching force 300 kN Maximum sheet thickness 6.5 mm Largest workpiece weight 200 kg Machining area 1,500 mm x 4,000 mm (with repositioning up to 8,000 mm) Punching head with FANUC® drive - Programmable: - Punching stroke - Punching depth - Punching speed and - Stamping tool acceleration Tool magazine for 15 pieces up to optionally 150 pieces indexable tools Indexing accuracy 0.01° On request, the machine can be supplied with a TRUMPF® tool system Patented vertical tool magazine ...

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet with drawer and intermediate shelf -Width: 500 mm -Depth: 400 mm -Height: 970 mm -Door: lockable, without lock -Weight: 36 kg

Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console -Manufacturer: Starkstrom Gummesbach, two-hand control panel -Dimensions: 400/400/H915 mm -Weight: 18 kg

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: C13TE2F Engine No.: 284948 Power: 377 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S 4 L 1 D - F 41 Gene. No.: N 22J425396 Generator power: 400 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 600 Dimensions of the power unit: Width approx. mm: 1.620 Height approx. mm: 2.295 L ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm ...

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

Min. 90x130mm, Max. 320x480mm, Capacity: 14000 Cycles/Hour, 6 Feeder Stations, 3x DVU 400 Vertical Feeder, 3x DHU 400 Feeders, 1x CHU 450 Cover Feeder, Stiching Unit ST 400 with 2 Stiching Heads, Three Knife Trimmer TR400 with Stacker Delivery

length: mm height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Pulse welder Hybrid 4002 Year of manufacture 2005 Feeding device / 4 rolls wire feed DV 39 machine no.: 940 16 222 - Welding hose 4000mm - Ground cable 70 square 5000mm - Intermediate hose package approx. 4000mm - Hose package Binzel MB511 Pulse current The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt -Conveyor belt: with conveyor ribs -Width: 400mm -Length: 7120mm -Transport dimension: 1200/400/H300 mm -Weight: 26 kg

Face plate, face plate chuck, four-jaw chuck, face lathe chuck -Face plate: chuck size Ø 400 mm -Cone: Ø 102 - 82 mm -Intake: thread M152 x 4.5 -Through hole: Ø 82 mm -Weight: 54 kg

Bezel, steady rest, lynette -Bezel: max. passage Ø 400 mm -Center height: 345 mm -technical drawing: with the photos -Total dimensions: 930/165/H890 mm -Weight: 98 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Towing cube: heavy version -Material: steel -Number: 2x clamping cubes available -Price per piece -Dimensions: 620/400/H505 mm -Weight: 332 kg/pc.

I sell a heavy briquetting press RUF RB400. Year of construction 11/2012 Engine power 22kW Productivity Number 400 pcs. Wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions: 3000 x 1800 x 2000 mm Combined weight 3000kg Equipment on the right - right entrance box. Condition after full remont/500Mtstd warranty as new. Available right away. With full documentation and CE.

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: hanger bolts M12 x 400 -Type: M12 x 400 SW 9 fully assembled -Material: stainless steel V2A -Number: 43 pieces available -Price: per piece / minimum purchase 5 pieces -Weight: 0.3 kg/pc.

Circular knives, circular cutting knives, machine knives, replacement knives for cutting machines -Circular blade: Replacement blades for cutting machines -Blade size: 400x30x3 Serial number: 207484 -Number: 3 knives available Price: per piece -Weight: 2.9 kg/pc.

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing -Pipe sealing cushions: 23 pieces, mostly with connecting pipe -Diameter: 75 to 400 mm -Quantity/Size: see photo parts list -Price/Fee: complete -Transport dimensions. 1200/800/H300mm Total weight: 95 kg

Used greenhouse lighting, manufacturer: DH-Licht, model MGR-K 400-CHD, for sale by bid

Rotary table, rotary dividing table, dividing attachment, dividing head -Manufacturer: Walter, rotary table type Rts 400 G -Clamping surface: Ø 400 mm -Center bore: Ø 31 mm -Groove width: 14 mm -Dimensions: 700/510/H260 mm -Weight: 294 kg

Bench grinder, bench grinder, pedestal grinder, pedestal grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1400 rpm -Grinding discs: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 720/520/H1210 mm -Weight: 207 kg

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: approx. 400 to 750 mm, see photos -Dimension: 930/470/H1140 mm -Own weight: 124 kg

Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Input: 3x 380..500 V~ -10% 6% 50/60 HZ -Output: 3x (0-220/240) V~ 0..180 Hz 9.5A~ 400V -Dimensions: 100/340/H270mm -Weight: 4.7kg

Brush machine Wandres type Ingromat Cleaner CF04/400 Specifications: • Working width (mm): 400 • Brush: top and bottom • Spraying device

Three knife trimmer Stitching heads (2 x ) Omega stitching heads (2 x ) Feeder (6 x TAL 400) Stacker (Rima) Cover feeder (UFA 400)

current intensivity: 400 A weight of the machine ca.: 125 kg dimensions of the machine ca.: 470x1025x865 mm min. current voltage (V) 400 max. current voltage (V) 400 min. Welding current intensity (A) 10 max. welding current intensity (A) 400 Fuse protection 25 IP protection class 23 Insulation class H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt delivery Horizontal pile feeder (1x DVU 450) Three knife trimmer (TR 400) Feeder (1x DHU 450) Feeder (1 x TAL 400) Feeder (1 x TAS 400) Cover feeder (1 x UFA 400)

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal, digital input terminal -Manufacturer: Wago, digital input terminal from Demag D 100-275 NC injection molding machine -Type: 750-400 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 100A -Quantity: 2x power controllers available -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg/pc.

Processing plant Manafacturer: Koruma (Nameplate missing) Type: Disho V160/400 Filling volume: 400 l Batch volume: 320 l no vacuum no double jacket with control cabinet, recirculation line & three-way valve LWH: 1500 x 1050 x 1550 mm

Technogel 4000E Rotary filling machine Serial: RA1091/01E 2010, Stainless, compact rotary filling machines, capacity 4000 pcs per hour, HMI screen controls, variable speed, mobile, 3Ph

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 80A -Quantity: 1x power controllers available -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg

Motor for folding machine Eurofold / Foldmaster 235 / 435 / 200 / 400 Art.: PS2356

Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke, soft starter, starting choke -Manufacturer: Horstmann, soft starter -Type: ESA 1.5/400 -P motor: 1.5 kW 400V 50/60 Hz -Dimension: 135/55/H75 mm -Weight: 0.3 kg

Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 80-400 Nm -Art.No.: 4440-01 -Torque: 80 - 400 Nm / 60 - 300 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 755/70/H65 mm -Weight: 2.1 kg

M. No.: 24 Kom.No.: 551.3852 Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display Voltage is 400V, 3 phase, neutral and ground. 50hz is the frequency.

NDT lathe - Böhringer Type VDF 400 Spindle 600-440 mm maximum length 2000mm Tool magazine with 12 tools

Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1200 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1060 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

for 25 hp tractors ,normal PTO 540 rpm ,instruction manual , replacement catalog ,

Lippert belt conveyor ascending belt GF 1995-550-400 RA1656 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 1995 mm (leading belt 560mm + ascending belt 1435mm) stand width (NB): 550 mm Belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulle ...

Control, bridge control, loading technology control, dock leveler control, ramp control, gate control -Manufacturer: mydocking, control for folding wedge bridges or similar -Type: TA MS 400V -Voltage: 3Ph 400V AC -Motor power: up to 1.5 kVA -Dimensions: 220/140/H270 mm -Weight: 2.3 kg

Dematic belt conveyor 9824-500/400 Dropping conveyor with Center drive Built in 2008 Length incl. task band: 9,824 mm Width: 500 mm Belt width: 400 mm Elbows + backward belt nubbed belt Habasit Belt conveyor straight length: 2,507 mm Bow piece 1: 632 mm Backward belt length: 5.851 mm Submission belt smooth belt length: 733 mm, with exaggerated rubberized drive drum Drive: SEW 400 V, 0.75 kW 2.1 A RPM 13000, number of drive shaft RPM 68 Speed v = 0, 35m / sec. and 21 m / min. If necessary optional: 5 units, high-demand support Features: Construction year: 2008 condition: very good (used) Conveying length in mm: 9827 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Ampere: 2,10 Conveyor speed m / s: 0,35 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach m ...

Dematic belt conveyor 7872-500/400 Belt conveyor down, drive, shaft mounted gearboxes Built in 2008 Length incl. task band: 7,872 mm Width: 500 mm Belt width: 400 mm Bow piece + backward belt nubbed belt Habasit Tax band smooth strap, length: 733 mm with exaggerated Sheet piece 2 St. kinks adjustable Bow piece 1: 631,72 mm Sheet piece 2: 66,50 mm rubberized drive drum Drive: SEW 400 V, 0.75 kW 2.1 A RPM 13000, number of drive shaft RPM 68 Speed v = 0, 35m / sec. and 21 m / min. If necessary optional: 5 units, high-demand support Features: Construction year: 2008 condition: very good (used) Conveying length in mm: 7872 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Ampere: 2,10 Conveyor speed m / s: 0,35 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfac ...

Dematic belt conveyor 8105-500/400 Ascending conveyor, drive, shaft mounted gearboxes Built in 2008 Length incl. task band: 8,105 mm Width: 500 mm Belt width: 400 mm Climbing belt with bow piece nubbed belt Habasit Task band smooth strap, length: 733 mm with exaggerated Sheet piece 2 St. kinks adjustable Bow piece 1: 663,5 mm Sheet piece 2: 631,77 mm rubberized drive drum Drive: SEW 400 V, 0.75 kW 2.1 A RPM 13000, number of drive shaft RPM 68 Speed v = 0, 35m / sec. and 21 m / min. If necessary optional: 5 units, high-demand support Features: Construction year: 2008 condition: very good (used) Conveying length in mm: 8105 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Ampere: 2,10 Conveyor speed m / s: 0,35 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich ei ...