met tech used for sale

Used TREPKO type 233KSP Filling monoblock - Year 2015Technical Specifications & Performance DataThe Trepko Type 233KSP filling triblock/monoblock is industrial filling and capping equipment for continuous gravimetric dosing of food, personal-care, household and industrial liquid products. Manufactured in 2015, this machine combines filling and plastic cap application within a compact production system designed for accurate container handling.Manufacturer: TrepkoModel: Type 233KSPProduction capacity: up to 7,200 containers/hourOperating rate: 40 cycles/minFilling system: gravimetric fillingFilling valves: 3Filling nozzles: 3Container format range: 100 g to 500 g, adaptable through format changeoversDimensions: 3.3 m length, 2.0 m width, 3.3 m heightWeight: 2,500 kgAdvanced Automation & Control SystemsThe monoblock is equipped with an Allen Bradley CompactLogix 1769-L30ERM PLC and a Pro-Fa ...

Manufacturer: Vi Technology Year of Manufacture: 2017 Model: Vi 8K 3D Type of Machine: AOI System Technical Specifications: - Configuration: Dual 8K SPECTRO 3D - System Type: Automated Optical Inspection System - Dual Lane Single Inline (basic configuration) - 3D Sensor: New integrated 3D sensor developed in partnership with German company - Resolution: approximately 20 micron x 20 micron x 0.7 micron (xyz) - Compatibility: K-series algorithm chain, 5K/7K/9K HW platform - 3D Image Production: High resolution 3D image for review operator classification - Gantry: High speed gantry, precision XY gantry, high-speed linear motors with closed loop high resolution linear encoders - Conveyor: Automatic conveyor width adjustment for boards up to 533 mm x 610 mm (21 in x 24 in) - PCB Size Dual Lane Mode: 2 x 432 x 325 mm - PCB Size Single Lane Mode: 432 x 600 mm - Maximum PCB Weight ...

Manufacturer: Vi Technology Year of Manufacture: 2021 Model: Vi 8K 3D Type of Machine: AOI System Technical Specifications: - Configuration: Dual 8K SPECTRO 3D - System Type: Automated Optical Inspection System - Dual Lane Single Inline (basic configuration) - 3D Sensor: New integrated 3D sensor developed in partnership with German company - Resolution: approximately 20 micron x 20 micron x 0.7 micron (xyz) - Compatibility: K-series algorithm chain, 5K/7K/9K HW platform - 3D Image Production: High resolution 3D image for review operator classification - Gantry: High speed gantry, precision XY gantry, high-speed linear motors with closed loop high resolution linear encoders - Conveyor: Automatic conveyor width adjustment for boards up to 533 mm x 610 mm (21 in x 24 in) - PCB Size Dual Lane Mode: 2 x 432 x 325 mm - PCB Size Single Lane Mode: 432 x 600 mm - Maximum PCB Weight ...

Manufacturer: Vi Technology Year of Manufacture: 2020 Model: PI PRIMO Type of Machine: Solder Paste Inspection (SPI) System Technical Specifications: - Configuration: Single - 3D Vision: 80 Mpixel 3D system (32 cameras, 8 projectors) - Triangulation: Distortion free 3D triangulation system - Lighting: High power RGB LED lighting for 3D color image - Resolution: 15 micron - Max Paste Height Measurement: 400 micron - Max PCB Size: 533 x 533 mm - Min PCB Size: 50 x 50 mm - PCB Thickness Range: 0.1 to 5 mm - Edge Clearance: 3 mm - Max PCB Warp: plus or minus 5 mm - Calibration: Embedded photometric and geometric calibration tools - Standard Conveyor Length: 1000 mm (800 mm option) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Vi Technology Year of Manufacture: 2017 Model: PI PRIMO Type of Machine: Solder Paste Inspection (SPI) System Technical Specifications: - Configuration: Single - 3D Vision: 80 Mpixel 3D system (32 cameras, 8 projectors) - Triangulation: Distortion free 3D triangulation system - Lighting: High power RGB LED lighting for 3D color image - Resolution: 15 micron - Max Paste Height Measurement: 400 micron - Max PCB Size: 533 x 533 mm - Min PCB Size: 50 x 50 mm - PCB Thickness Range: 0.1 to 5 mm - Edge Clearance: 3 mm - Max PCB Warp: plus or minus 5 mm - Calibration: Embedded photometric and geometric calibration tools - Standard Conveyor Length: 1000 mm (800 mm option) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Vi Technology Year of Manufacture: 2021 Model: PI PRIMO Type of Machine: Solder Paste Inspection (SPI) System Technical Specifications: - Configuration: Single - 3D Vision: 80 Mpixel 3D system (32 cameras, 8 projectors) - Triangulation: Distortion free 3D triangulation system - Lighting: High power RGB LED lighting for 3D color image - Resolution: 15 micron - Max Paste Height Measurement: 400 micron - Max PCB Size: 533 x 533 mm - Min PCB Size: 50 x 50 mm - PCB Thickness Range: 0.1 to 5 mm - Edge Clearance: 3 mm - Max PCB Warp: plus or minus 5 mm - Calibration: Embedded photometric and geometric calibration tools - Standard Conveyor Length: 1000 mm (800 mm option) Find more here - .ucymachines/ Contact us at - sales@ucymachines

AI VC MECHANICAL STRIPPING SYSTEM DIMENSION: 48 X 45 X88 MANUFACTURER: AIMS MOTION TECHNOLOGY FOR MORE INQUIRY KINDLY REACH OUT TO: HAKKIM (F25): +60 12-343 6052 FATIMAH ASMAD: +60 13-628 7197 IZLIN ISMAEL (F22/25): 018 258 2737

AI VC MECHANICAL STRIPPING SYSTEM DIMENSION: 48 X 45 X88 MANUFACTURER: AIMS MOTION TECHNOLOGY FOR MORE INQUIRY KINDLY REACH OUT TO: MUSTAQEEM (F22): +60 19 506 7040 FATIMAH ASMAD: +60 13-628 7197 IZLIN ISMAEL (F22/25): 018 258 2737

Used Surgical Laser, Works, can be tested on site has cooling water leak minimal, can be easily repaired. from veterinary practice dissolution without MOT Used, Without Warranty Pick-up only

Key data: 300 mm, 1000 mm, 11 kW

Rustikmat 2-1000 for surface treatment Feed via inverter 1 to 10 m/min. Air pressure 8 bar Suction capacity 3100 m³ / hour Air speed 28m/sec Maximum thickness in continuous flow 500 mm Minimum length in the through-sound 300 mm wiped 1100 kg

Turbo Tech centrifugal air compressor Model TIL-2700 45 m³/min, 250 kW ABB motor = 1 Unit Cooling method: water cooled Contact No: 011-64263265 [Arissa] F27

turning diameter: 590 mm turning length: 1100 mm control: Fanuc turning diameter over bed: 800 mm total power requirement: --- kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inject Date Encoding Linx Printing technologies plc Type: Linx 8910 Price: 3000€ See details photos, cover letter for further information Fully functional incl. software Private sale, no guarantee and no warranty

on mobile base frame

tube diameter: 48 mm bending radius max.: 90 ° total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 0,8 x 1,2 m Electro-hydraulic mandrel tube bending machine with - four-position bending angle pre-selection - bending tools: 48.3, 42.4, 33.7, 1/2 - mandrel length: 4500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor Belt Straight Type GL MTF Technology Length 3.30 m Width 0.57 m with usual signs of use Price is exclusive of VAT

Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min -10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical ...

AIRCOOLED CHILLER MTA TAEEVO TECH 402 96.1 KW Cooling capacity: 96.1 kW / 27.32 tons (12/7 — 35°C) Year of manufacture: 2022 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP103KCE-TFD-477 (scroll) Type of refrigerant: R410A Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump Lowara PLM112RB14S2/340 E3, expansion vessel. Dimensions: 3.3x1.26x2.12 m Weight: 1224 kg Working hours: 0/0/0/0 h. Condition: New

swing over bed: 1.050 mm Swing over cross slide: 825 mm max. working diameter: 825 x 2.500 mm control: FANUC main spindle speeds: 1.200 U/min CNC Turning- and Milling Center | HWACHEON - HI-TECH 850 YMC equipped with a turret for driven tools as well as C- and Y-axis, programmable steady rest and tailstock. The machine is in a well-maintained condition and can be inspected at any time under power. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HI TECH 850 | HI-TECH 850YMC | HITECH850YMC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical sp?ndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control

Huber Rotamat RO9 as fine screen version and with EX-protection, spray nozzles and press zone flushing. The intended use of the RO9 is the separation of solids from wastewater, compaction and washing of the screenings. Application:- Wastewater treatment plants (municipal and industrial)

Huber Rotamat RO2 as fine screen version and with EX-protection, spray nozzles and automatic press zone flushing. The intended use of the RO1 is the separation of solids from wastewater, compaction and washing of the screenings. Range of application:- Wastewater treatment plants (municipal and industrial) The machine had its last application in a municipal wastewater treatment plant.

Key data: 2200 kN

Engel Victory 1050/220 Tech with the Wittmann W721 robot Year of Make: 2010 Injection unit: Screw diameter: 55 mm Injection weight: approx. 480 g Spray pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 220 t Spar spacing: 0x0 mm Size of the clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Control with hot runners x 30 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 12200 kg Length/Width/Height: 5.66x1.88x2.10 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in liv ...

Key data: 2600 kN

Engel Victory 1350/260 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 55 mm Injection weight: approx. 590 g Spray pressure: 2183 bar Dosing volume: 618 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 8 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine -  ...

Key data: 2600 kN

Engel Victory 2050/260 Tech Ecodrive with the Engel Viper 20 robot / Hybrid machine / Operating hours: approx. 20,000 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 70 mm Injection weight: approx. 1020 g Spray pressure: 1780 bar Dosing volume: 1155 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control:CC 300 - Touch Screen Additional equipment: Production line with the Engel Viper 20 robot Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 20,000 in automatic mode Robot interface Air Valve x 4 Hydraulic core pull x 2 on the side of the movable clamping plate Hydraulic core pull x 6 on the side of the fixed clamping plate Injection unit is wear-resistant and resistant to corrosion Main motor of the  ...

Key data: 3000 kN

Engel Victory 1350/300 Tech Ecodrive with the Sepro Industrial Robot SDR 22S robot / Hybrid machine / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2012 Injection unit: Screw diameter: 60 mm Injection weight: approx. 670 g Spray pressure: 1835 bar Dosing volume: 735 ccm Clamping unit: Clamping force: 300 t Spar spacing: 0x0 mm Size of the clamping plates: 1200x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Sepro Industrial Robot SDR 22S robot Machine in very good technical condition Operating hours: approx. 18,000 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by i ...

Key data: 3500 kN

Engel Victory 2550/350 Tech with the Engel Viper 40 robot Year of Make: 2010 Injection unit: Screw diameter: 80 mm Injection weight: approx. 1410 g Spray pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Spar spacing: 0x0 mm Size of the clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Engel Viper 40 robot Tie-bar-less machine Robot interface Air core pull x 4 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Hydraulic core pull x 1 on the side of the fixed clamping plate Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Angel Viper 40 Year of Make: 2010 6-axi ...

mobile finest oil filtering technology, new Technical oils serve just one purpose: It should run smoothly. After all, a machine downtime costs you time and money. Our filter technology was developed in order to optimize machine running times. Ultra-fine filter technology ? for the sake of your machines In order to achieve a high level of purity we offer the appropriate technology for the different oils and application areas: - in order to achieve the best purity class - under the aspect of economy Finest filter technology Our systems maintain the oil of your machines so that the necessary oil purity is secured: - Ultra fine filtration of technical oils up to 1µm - Extremely long service life of the filters with up to 2.000 hours - High capacity to absorb water with up to 5 liters - Before starting up - Mobile for maintenance intervals on several machines - In the oil circuit during run ...

mobile finest oil filtering technology, new The mobile ultra fine filter system M 130 is the flagship among the mobile filter systems. Equipped with a scalper, a (washable) pre-filter for coarse impurities (up to 5 µm, for example swarf), and two C-1000 housings, this system leaves nothing to be desired in order to process technical oils, water-/ oil- or oil-/water emulsions to excellent purities. The scalper and the pre-filter increase the life service of your systems and the filter elements significantly due to the two-stage pre-filtration. This is followed by the oil processing with the reliable ultra fine filter elements which are also used in space travel. You achieve purity values up to NAS 1 (ISO 4406: 13/10/7) and better technical data M 130 flow oil: bis 1.050, 1.500, o. 2.100 liter/hour dimensions: height: ca. 1.175 mm, width: 585 mm, depth: 811 mm weight: ca. 93 kg Please, c ...

SPX Flow Technology ultra filtration system, name: UF MEMBRANUZEM, year of construction: 05/2017, function Skim Milk Concentration, capacity: 1500 liter per hour, UF Retentate 18,66% TS, UF Permeate, dimensions: 3700 mm x 1740 mm x 2460 mm, 2150 mm x 2000 mm. Including 5 pallets with parts and digital set of documentation.

29 Sets of five professional hexagonal dumbbells each (Kg 2.5 - 3.5 - 5 - 7.5 - 10). Designed for strength and functional free-body training. The shape of the handle and the knurling design allow a firm and secure grip even in the most difficult movements. The shape and materials of the hexagonal coverings ensure stability and grip in floor exercises. The chrome-treated structural steel handle resists impact and oxidation. The thick 5mm rubber coating absorbs shocks and protects surfaces. Thanks to their shape, the hexagonal dumbbells do not roll on the floor and can be placed on any flat surface. The embossed and contrasting numbers help in selecting and quickly changing weights. Machine condition: unchecked. Approx. Transport dimension: LxWxH 1000x800x400 mm Auction-ID: A7-50212-521

1 office container system approx. 1,000 m2 Price: on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal inju ...

Important and outstanding design features of the RaptorX-SL CNC Fraes machine / CNC-Fraese with steel substructure / RaptorX-SL2200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (through-shoehe under bridge : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special larges up to 17 500 mm ( on one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to  ...

; ready for operation

Control electronics for turbomolecular pumps (Turbotronik) (e.g. for Turbovac 361) Manufacturer: Leybold Type : NT 20 Status: over-prun & functional Delivery time: ex stock (intermediate sale reserved; ready for use

Vacuum - Measuring device CVC 2 Manufacturer: Vacuubrand Type : CVC 2 II Cat No. 24411004 Status: proven & functional Zubehoer : User manual Optinal: Power cable Measuring connection cable Delivery time: reserved from stock

throat: min/max ca. 98-110 cm dimensions: ca. 40 x 8 x 256 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

7 HARRY LUCAS circular knitting machines for the production of endless single jersey tubular fabric, type RR3-1sPL, with fixed cylinder and rotating cambox with following specifications: 1 machine diameter 1 3/4", gauge 10, 56 needles, 1 system 1 machine diameter 2 5/8", gauge 10, 80 needles, 1 system 1 machine diameter 3", gauge 10, 92 needles, 1 system 1 machine diameter 3 1/4", gauge 10, 102 needles, 1 system 1 machine diameter 3 1/2", gauge 10, 108 needles, 1 system 1 machine diameter 3 3/4", gauge 10, 118 needles, 1 system 1 machine diameter 4 1/2", gauge 10, 140 needles, 1 system

Tool presetting device Brand: Zoller Type: Venturion 400 Without computer,software. Mechanics only This item is only sold to traders.

Various threaded rings, border raven gauges, measuring rings Etc in the item

Coordinate Measuring Machine 6-Axis Zett Measuring AMPG 3600 Precision Zett Mess Coordinate measurement technology Type AMPG 3600 Precision 6-axis measuring joint arm Magent foot and tripartite Laptop with software

properties: Used pallet roller conveyor from the manufacturer Bito Condition: Top condition with slight signs of use Color: gray Specialist dismantled and packaged Stock 177meters Price per meter Technical Data Plant consists of 73 segments 63 segments x 2.495mm 10 segments x 1.990mm Total width: 880 mm Conveyor width: 870 mm Axle distance: 95 mm Roller cross-section: 60 mm Material: steel, galvanized Height frame: 110 mm There are 3-4 brake rollers per segment. Roll diameter: 80mm pallet roller conveyor Due to the excellent workmanship of the pallet roller conveyor, your material glides gently to the destination, even under heavy loads. Tailor-made tickets for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We will be happy to  ...

Technical data: Drive motors/ motors Number: 7 pieces available Manufacturer: SEW Eurodrive Condition: good (used) Power: 50Hz/r/min 1461/228 KW 1.5 S1 Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide .B: logistics, pharmaceutical industry, crafts or the electronics industry. Together, we will develop ways to optimize your flow and material flow cost-effectively and sustainably. We can offer you even fully autom ...

Technical data: Drive motors/ motors Number: 6 pieces available Manufacturer: SEW Eurodrive Condition: used, not used, Power: 50Hz/r/min 1440/140 KW 0.75 S1 Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide .B: logistics, pharmaceutical industry, crafts or the electronics industry. Together, we will develop ways to optimize your flow and material flow cost-effectively and sustainably. We can offer you even fully  ...

Technical data: Drive motors/ motors Type: three-phase motor Manufacturer: SEW Eurodrive Condition: used, not used, Power: 50Hz/r/min 1440/282 KW 0.75 S1 Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide .B: logistics, pharmaceutical industry, crafts or the electronics industry. Together, we will develop ways to optimize your flow and material flow cost-effectively and sustainably. We can offer you even fully automa ...

Technical data: Drive motors/ motors Number: 6 pieces available Manufacturer: SEW Movimot Type: MM150-503-00 18215033 Condition: used, unused Power: KW 1.5 Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide .B: logistics, pharmaceutical industry, crafts or the electronics industry. Together, we will develop ways to optimize your flow and material flow cost-effectively and sustainably. We can offer you even fully automatic s ...

full drawer cabinet cca 350 pcs various pinball, thread edging, etc.

Machine type: Test mandrel Manafacture: System 3R Type: 3R-606 Year of construction: unbek. Condition: Used Offer will only be sent if a complete imprint is provided! Price 800 Euro incl. 19 % VAT and shipping within Germany Location Warstein , Germany Reference M-HIR-0623-1 DESCRIPTION We offer you to buy a used mandrel from the manufacturer System 3R, as shown in the pictures. Availability: Immediately Our offer is aimed at traders who are registered within the meaning of the trade regulations according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are excepted!

Machine Type: SK50 Mandrel Manufacturer: KYUSHUKOGU Type: SK50 Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 178,50 Euro incl. VAT and shipping within Germany. Location Warstein , Germany Reference MZ-WER-1223-1 DESCRIPTION We offer you a used alignment mandrel, see pictures. Technical data will follow. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!