meat vacuum mixer used for sale

Continuous twin-shaft mixer with multi-plate clutch, suitable for vacuum operation. Mixing trough and double cylinder length: 1,500 mm + 500 mm, mixing trough width: 700 mm.

Rühle MKR130 Tumbler used Machine is completely made of stainless steel Mixing arm can be dismantled without tools via bayonet Mixing, batching and rumbling under vacuum and cooled Fully functional must be cleaned thoroughly before use, as protein deposits are present only the red wiper rubber is missing on the pile arm and the left side part was slashed (see photos) Video about test run available

Stephan VM60 Vacuum Mixer used with push-button switch, according to the previous owner 20 minutes interval, 4x on, 4x off then must be switched on again Mixed insert made of stainless steel Machine for emptying and operation with low content tiltable Boiler volume: 72 litres Batch sizes: up to 60 litres the machine must be thoroughly cleaned before use, as there are protein deposits inside Dimensions: 84x58x120cm Video about test run available Mixing Tumbler, Tumbler, Vacuum Tumbler, Mixer, Mixing Machine, Mixing Machine

A vacuum mixer/homogenizer Olsa for the cosmetics industry is available. Usable volume: 400L, total volume: 470L, vessel diameter: 850mm, vessel height: 730mm, discharge valve diameter: 30mm, inlet nozzle diameter: 25mm, speed: 30rpm, material inside/outside: AISI316/AISI304. Documentation available. An on-site inspection is possible.

The Lutetia Type 3 churn meets the requirements of workshops looking for a higher level of capacity without sacrificing process precision. Thanks to vacuum mixing, marinades penetrate faster and more evenly, improving texture, limiting oxidation and stabilizing yields. This makes the machine ideal for integration into processing lines where regularity, hygiene and speed are paramount on a daily basis. In addition, its useful volume of 2500 L and its capacity of 1400 to 1500 kg make it possible to absorb large batches, while maintaining a homogeneous mixing. Indeed, the geometry of the bowl, combined with vacuum work, promotes the diffusion of brine and reduces cycle times. In addition, the ergonomics of the heights (loading, shaft and under the mouth) facilitate handling, tank feeding and evacuation, which concretely optimizes the flow on the line. In addition, the stainless steel  ...

Ekomex Vacuum Mixer -Type: MZ 500V -Power: 9 kW -Capacity: 500 L -Vacuum pump -With vacuum -Two speeds -Right/left rotation -With loading -2 paddle mixers -Power supply: 400V 50Hz -Dimensions: 2100 x 1900 x 2720 mm -Made of stainless steel -Condition: used in very good condition, overhauled, ready to work

Type: MIX-180V Serial number: 2440 Year of construction: 2023 Mixer: 180 litres, double paddle Mixing speed: 6 - 60 RPM, frequency controlled Vacuum pump: Busch 21m³/h Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 3kW Dimensions: 1750 x 850 x 1450 mm Weight: 388 kg Machine in new condition, only 8 working hours!

Height 2700 mm Width 1440 mm Length 2700 mm Electrical Supply: 400V 50Hz 3N Total power 12.5 kW Main Material Stainless Steel, Acid Resistant Agitator Type Spiral Agitators Product ejection Pneumatic flaps, front Product Weighing System No Loading None, possibility to buy additional loading into the bulk mill Stirrer Type Vacuum Stirrer

Dorit Vacuum Cooling Tumbler in very good condition CVM 300

Vakona ESK 850 STL-B incl. loading, top condition

We sell here a vacuum tumbler with cooling from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2004, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.

We are selling here a vacuum tumbler from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2009, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, without cooling, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.

Model:MKR300 Year:2018 Condition:Used Serial Number:10070346G Stock Number:3307 Double jacket for cooling, Busch vacuum pump and lifting arm for 200L tote bin Mixer:300 litres Filling:max 220 litres Mixing speed 0 - 30 RPM Refrigerant: R404a Power: 3 x 400V, 50Hz, 6.5kW Dimensions: 1700 x 1950 x 2450 mm Weight: 1200 kg

Scaniro vacuum mixer with lifter for 200 liter meat bins, type: 403, serial number: 124, year of construction: 1984, 380 V, 3 Ph, 50 Hz, 8.7/9 A, 2.5/4 kW, capacity: 950 liter, Busch vacuum pump, type: 063-132, capacity: 63 m³ per hour, dimensions: 2900 mm x 1800 mm x 1800 mm.

Vacuum Glass Chamber Exikator Glass The glass cylinder and glass lid can be used to test reactions as well as the behaviour of a wide variety of liquids/substances/products under vacuum. Easy handling and operation Many connection possibilities volume of 13.9 liters Good and easy cleaning possibilities weight 14.5 KG Areas of application: Labore e.g. for reaction tests under vacuum production e.g. drying of components universities e.g. for preliminary research e.g. design of plastic vacuum glass chamber exiactor glass possible supply/variants: Development Various sizes of the glass vacuum chamber available A widerange of pumps available for vacuum generation heating plate vacuum flowthroughs adaptations vacuumdata for the glass chamber From safety glass seal made of Viton glass lid, it is easy to removable joint plastic inserts for a safe stand leakage rate less than 0.1 L/s external ...

Esta Eurosog W/H 80.299 Industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine and free-flowing dusts. The AC version is designed for sporadic use during cleaning work in workshops. Its smooth-running rollers provide the industrial vacuum cleaner with a high degree of mobility. The spacious dust collection container has a capacity of 80 litres. Thanks to the patented tipping device, the dust can be disposed of effortlessly. Areas of application for EUROSOG industrial vacuum cleaners: AC version for sporadic use For dry, coarse and fine dusts For cleaning processing machines For general cleaning work (e.g. workshop floors) Can be used in many industries (e.g. wood and metal industry) Metal industry Construction industry Wood industry Chemical Printing industry Flocculation industry Cleaning industry Ha ...

; ready for operation

Claw vacuum pump dry compression Manufacturer: Busch Type: Mink MM 1402 AV Motor: DS 400V suction power: 400 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

Rotary vane vacuum pump oel circulation lubricated Performance: 12 months Manufacturer: Becker Type: U 4.250 SA/K motor: DS 400V suction power: 250m3/h final pressure: 3 mbar (abs.) . Generalueberholt Zubehoer: Oelfilling (Mineraloel) Delivery time: by arrangement Further details or technical advice via request; ready for use

Rotary vane vacuum pump Manufacturer: Leybold Type: Trivac D25 BCS Cat No.: 11879 Suction power: 25m3/h End pressure: approx. 0.005mbar engine: 400V Ds Please send us your pump request as a request; ready for use

Leybold pump level Data on pump level: RUTA - Pump system RUTA 1001 (20900895586) (02209= Pre-pump: Leybold Sogevac SV300 Cat: 109 31 booster pump: Leybold Ruvac WAU1001 Kat: 11741 Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leak Performance: 3 months 22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1402 AV Engine: DS 400V Suction power: 400 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image); ready for operation

; ready for operation

Auction-ID: A7-45252-16

Rotary vane vacuum pump Oelumlaufgeschmiert warranty: 12 months Manufacturer: Becker type: U 4,250 SA/K Engine: DS 400V Suction power: 250 m ³/h Discharge pressure: 3 mbar (ABS.) Status: very good condition. Reconditioned Accessories: oil (petroleum) Delivery time: Please enquire Further details or technical assistance like via request; ready for operation

Rotary vane vacuum pump Status: Generalueberholt; Asgood Performance: 12 months Lierfertime: from stock Manufacturer: Busch Type: R5 RA 165D Engine: 400V equipment: Mineraloel o. Syntetisches Oel Nominal suction systems: 160m3/h end pressure: 0.5 mbar (abs .) Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you with information; ready for use

Sprintus_Industriesauger Craftix 35 M Product name: Industrial vacuum cleaner Type: Craftix 35 M Manafacture: Sprintus Article number: 118.030 Year of construction: 03/2023 Condition: Brand New Technical details: - Mains voltage: 220-240 V / 50-60 Hz - Power: 1,200 W - Sound pressure level: 75 dB(A) - max. vacuum: 250 mbar - Volumetric flow: 74 liters / sec. -Plastic containers - Container volume: 35 litres (gross) - Power cord length: 10.0 m - Suction hose length: 5.0 m - Suction hose diameter: 35 mm - Diameter intake manifold: 38 mm, 2.50 m - Weight: 16.0 kg - Dimensions (LxWxH): 54 x 39 x 63.5 cm Equipment: - Stainless steel intake manifolds, 2 x 0.5 m - Dry floor nozzle 450 mm - Crevice tool - Round brush - HEPA 13 cartridge filter - Power tool adapter 35 mm diameter - Power tool adapter 21, 25, 32 mm diameter - Non-woven filter bag - Disposal bag  ...

Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Vacuum Vacuum Cleaner Manufacturer Nilfisk Type VHW 321 L Year of construction 2013

Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle

Vacuum lifting device, vacuum lifterCustom-made as a handling device for an industrial robotYear of construction 2008Load capacity approx. 60 kgSuction foot spacing min. 120 x 150 mmSuction foot spacing max. 700 x 600 mm- 4 suction feet 100 mm- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces cross member, adjustable in width via servo drive from 150-600 mm- suction foot spacing via 2 servo drives adjustable from 120-700 mm- suction cup adjustment via 3 pieces of servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very elaborate and

Vacuum lifting device, vacuum lifter FESTOSorld production as a handling device for an industrial robotYear of construction approx. 2008Load capacity approx. 50 kg- 7 pieces suction plate 32 mm (construction intended for 12 pieces)- 16 pieces suction plate 42 mm (construction intended for 20 pieces)- 5 pieces suction plate 60 mm (construction intended for 6 pieces)- a few suction feet are missing, see pictures- swivelling base body for suction surface in 90 angles or flat 180- base body pneumatically swivelling- Very elaborate and precise construction with

Debus DDS 118 / 5/ 23 Chips Industrial Vacuum Cleaner 6 bar 4.6 m³/min Original price 4604,- € Manufacturer: Debus Model No.: DDS 118 Full Name: DDS 118/5/23 Chips Year of Make: 2016 Fabr.-Nr.: 278 Operating pressure: 6 bar Suction power: 4.6 m³/min Air requirement: 1.3 m³/min Weight: approx. 30 kg Capacity: approx. 40 litres Dimensions: 55 cm long, 60 cm wide and 150 cm high Condition: used Scope of delivery: see pictures Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosts. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machines More items - new and used - can be found in our shop! International shipping costs on request!

Offer 25430 Specifications: - Nominal pumping speed 160 m³/h - Vacuum container VE 350 - 160 350 l - Drive 400 V / 4 kW - Space requirement approx. W 2000 x D 600 x H 1250 mm - Weight approx. 250 kg

Unaudited Auction-ID: A7-45427-250

✨Vorwerk Kobold VK 140✨ EB 360 Vacuum Cleaner Stick Vacuum Cleaner Auction-ID: A7-45427-131

Flow rate 100 m³/h, final vacuum 5 mbar, motor power 2.2 kW, 1450 rpm. Serial: 2200640 Estimated weight: 80 kg Approximate dimensions: 800x600x500 mm Auction-ID: A7-44996-51

The Velati F4 continuous meat cutter, made entirely from stainless steel, has been designed to transform a block of meat into meat pieces, using a blade system specially devised to avoid damaging or crushing the meat. A combined blade structure, consisting of an oscillating guillotine blade and circular saw blades, allows the meat to be processed at various temperatures and cuts both the lean and fat meat. The machine can produce up to 8-10 tons per hour. Velati meat cutter is driven by a conveyor, whose speed can be adjusted via a variator, allowing both the hourly production rate and the thickness of the cut pieces to be controlled. Velati meat cutter is equipped with inverter which regulate the feed belts. The F4 models is equipped with touch-screen control and PLC which can configure and store the different work programmes. The machine is also fitted with a safety system that is cont ...

Producer: INJECT STAR Type: FPW 17 Internal dimensions: Length 1620 x width 560 x height 1480 mm External dimensions: Lenght 1000 x width 500 x height 1050 mm 1 piece - not complet. Used pneumatic meat press for meat and bacon INJECT-STAR type FPW 17 with the possibility of the time setting and the automatic program - Air consumption approx. 7 bar Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Automatic slicer Bizerba A 404, with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

Automatic slicer Bizerba A 404 with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

Producer: Servotech 250 mm Description: Servotech (Brand new) -Throat diameter 250 mm -Output 5000 - 10000 kg/h -One speed motor -Full power 37 kw -External dimensions: 2070 mm x 1070 mm x 1685 mm -Hopper capacity aprox 300 l -Total wiegth 1500 kg -Machine is fully made of stinless steel -Mixing /grinding temperature to -15°C -Two sets of knives; one for frozen, and one for fresh meat.

Wolfking Belham Multi needle injector Model:B1-15S Serial:8207-01303 120 needles, walking bed product advancement,

Laska angle grinder WW 130, 130 mm, 1-speed grinder, frozen meat version, all stainless steel, ergonomic control, saftey cover for cutting set hinged and electrically interlocked, saftey grid for hopper. The machine is immediately available and can be tested in Koblenz, Germany.

Seydelmann automatic grinder AE 130, 130 mm hole plate diameter, almost completely made of solid stainless steel, 2-speed working worm, 2-speed feeding worm of stainless steel, conical and extra wide, rectangular to the working worm, approx. 14/18 kW, feeding motor approx. 1,8 kW, separately switchable, hopper capacity approx. 130 litres, with interlocked safety grid, worm, worm housing and closing nut completely stainless. The machine will be available soon and can be tested like in Koblenz, Germany.

Seydelmann ME 130, mixing grinder, hole plate diameter 130mm, Unger cutting system, working worm 2 speeds, 1 mixing speed, safety grid. You are very welcome to test the machine in our facility in Koblenz, Germany.

Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes

Seydelmann AD 114 automatic grinder, 114 mm, almost completely made of solid stainless steel, two speeds on working worm, two speeds on feeding worm, safety grid. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany.