137,858 used machines on RESALE, but how to find them? Machine Search
Glatt GCM 500 film coating machine for tablets, etc., perforated drum, drum diameter 1570 mm, drum opening diameter 550 mm, viewing window diameter 350 mm, max. drum volume 500 l, max. batch size 400 kg (at a bulk density of 0.8 kg/l), drum speed 1.5–15 rpm, spray system with peristaltic pump and 5 spray nozzles for film coating with a nozzle insert diameter of 1.5 mm, incl. inlet and outlett air system with frost protection heating, pre-filter, dehumidifier, dust collector, exhaust fan, electrical connection 400 V/3-phase/50 Hz, protection class IP55, all metal parts made of AISI 316 L stainless steel, spray nozzles made of AISI 316 stainless steel, in mint condition as practically unused.
Used production line for paints and varnishes from Diamac. The line includes: -2 x dissolver stationary 50hp, 1500 litres: diamac - industrial tyntometer: diamac (installation brand new, never used) - stationary mixer diamac 30hp inverter - stationary mixer slow speed diamac 10hp - column disolver diamac 15hp inverter - laboratory disolver diamac 2hp inverter - immea semi-automatic controller/ filler model dpc/5/30 - dust filter, pneumatic brand: wam - volumetric pumps for resin transport/dosing brand: pedrollo additional: - documentation, operating instructions, "ce" safety certificates, etc.
Used - quadruple flour dosing system with water dosing unit - TROMP dough production - KUNZE conditioning system - DEN BOER Multibake Tunnelpfen (19.8 x 1.55 m) - 2x RECORD PANDA BS RS flowpack - ET PACK Sprinter ET302P Carton Packer - incl. TNA Intelli-FLAV5 seasoning machine built in 2021 - Average output 18,000 pcs./h 60,000 pcs./h for 35 x 35mm pastries á 9g raw 12,500 pcs./h for 62 x 105mm pastries á 38g raw 18,000 pcs./h for 35 x 125mm biscuits á 27g Average fermentation time and baking time 20 minutes each - Incl. plastic belts or conveyor belts with side railings and electric motors - some large filling funnels made of stainless steel - Facility is clean and well-maintained - No visible damage system has already been professionally dismantled and stored. Visits are possible by arrangement.
1x Linear robot Reis RL80-13 incl. 2 control cabinets absolutely mint condition Year of construction 2009 there are 2 robots on each beam, a two-axis robot and a three-axis robot the system is dismantled, complete with control cabinets the glass gripper and the Zimmermann & Schilp non-contact glass lifting system are not part of the range of products there are 2 of these double robot systems available incl. loading
Capacity: 20 -25to/h Vintage: 2018 In very good condition Composed of : 1 Dosing table TRV 25 with special large hopper - With two vibration motors - With two screening zones - Total length 2 550 mm - Spout height : 1 350 mm - Hopper size : 1 800 x 1 750 mm - Dump height: approx. 2,200 mm 1 grape conveyor belt ELV TR 400 - With large special hopper - Discharge height: 4 300 mm Grapes destemming and sorting unit with: 1 Bucher Destemmer Delta E4 - Standard version - Destemming cylinder PHD 25 mm - With 2 cleaning balls 1 DELTA Trio XL sorting unit - Roll table with 36 sorting rolls - Adjustable 15 – 19 mm - Carrier frame in stainless steel, solid - Mobile version, with swivel castors. 1 F20 grape crusher 1 large hopper pump with scale - Content: 2 500kg - Solid base frame with feet and wheels - With integrated load cells. - Scales Mettler T ...
Qty. 1 Second-hand galvanising line Mfc.: ESMECH Equipment Ltd Built: 2016 Material: Cold Rolled Low Carbon Steel, Unannealed / FH U.T.S: 40 – 80 kg/mm2 Unannealed Strip Strip Width: 650 – 1250 mm Thickness for GL: 0.15 mm - 0.60 mm Incoming Coil Data ID: 508 / 610 mm OD: 1000 - 1900 mm Weight: 25 T Incoming Strip Surface Condition Oil Amount: 100 - 400 mg/m2 both side max. Iron Fines: 50 mg/m2 per side max. Scale or Rust: None Incoming Strip Shape: Flatness, crossbow and camber to JIS G 3141 Outgoing Coil Data Grades: Full hard & CQ Coating: 70 to 200 gm/m2 (both sides) – Aluzinc Coil ID: 508 mm / 610 mm (rubber sleeve) OD: 1000 - 1900 mm Weight: 25 T Type of the Line: Non-Ox Annealing Furnace type Continuous Metal Coating Line Process Speed: 150 m/min Entry/Exit Speed: 180 m/min Furnace capacity: 17.7 MT/hr max Net available working hours: 7200 w ...
Seamless Tube Plant - (4x) Finishing Lines Seamless Tube Plant - (4x) Finishing Lines From the European Seamless Tube production facility in France. These well-maintained Four Finishing production lines from Seamless Tube Plant are now available for individual purchase. Whether you need just one machine to complement your existing line or multiple units, you can now acquire these Finishing lines separately, no longer restricted to the full plant package. Learn More Whatsapp +31 6 51199492 1. Mechanical Hot Finishing Line (Lot 4010) Ø80–203 mm – Hot Process Finishing Line Efficient hot finishing line featuring straightening, end/coupon cutting, NDT testing, and bundling. Highlights: MONTBARD Straightener, ZUMBACH Laser, OHLER Saws, AMADA Band Saw, FOERSTER Testing Equipment. Act Now – Excellent for post-hot process tube preparation. 2. Mechani ...
Handfeeding station 8 stations gatherer automatic loading system Aster 180 sewing machine age 2008 Plus Stacker Technical details : minimum size : 150x100 mm maximum size : 420x320 mm speed : 180 cycles/minute available immediately
1 x MX gatherer - 15 stations (3x5) : 1 x Astronic 180 book sewing machine (year 2006) 1 x Astronic 180/42 (year 2001)
This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing and sheeting Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65mm+80mm+65mm Infrared heaters 3pcs plate filters Head: 3 Layer blown film Die head TE5303-IBC-350/500 Dies diameter 350 and 400 mm IBC The Gap: 1.8 mm Output: Up to 800 kg/hour depending on material formulation Air ring: Dual flow air ring carbon fibre Take off: Take off 2400 mm wide Oscillating nips Motorised side gusseting Rewind: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reels diameter up to 800 mm Winding width 2350 mm Accessories: T ...
Used line for processing green bean by Femia. New 2007. capacity: 5000 kg/h. The line consists of: 1. Descaler. 2. Rinser. 3. Rod splitter. 4. Rod cutter. 5. Aerator. 6. Vibrating distributor. 7. Bean tip cutters. 4 pcs. 8. Conveyors.
approx. 600m conveyor system, packing line, SSI Schaefer, – used - Ex-site price (net): only 99.500.-€, dismantled, packed and loaded! Manufacturer: SSI Schaefer Year of manufacture: 2018 Type: Conveyor system Many short sections / elements Roll width mainly 70cm, element width approx. 78cm Motorized roller conveyor Belt Pusher Belt Conveyors / Belt Conveyors Incl. curved belt conveyor from Transnorm Curve/Wedge Merge (Roller Conveyor Curves) Tapered roller curve Roller Switch Accumulation roller conveyor Folding Elements / Passageways Etc. Ground floor, 6 roller conveyor belts from incoming and outgoing goods with conveyor belt drive - 1st floor, five roller conveyor belts to supply 80 workstations with conveyor belt drive - 1st floor, five roller conveyor belts for the removal of 80 workstations with conveyor belt drive - 1st floor, waste cardboard belt f ...
GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...
Producer: Fritsch Condition: RENOVATED Made in Germany Description This Fritsch Line includes Fritsch calibrator type KK 88-700-L Fritsch infeed belt with flour duster Fritsch CTR cutting and turning unit type CTR-700-30-L Fritsch unfilled coiler type CRH-120-400-L 2000 year
Serial Number: 482 Construction year: Fbr 2000 Weight: +/- 2,1 tons Power: kW 13 Air pressure: 7-8 Bar Length mm: 7300 Width mm: 1200 Height mm: 2400 Working height: 750mm Transport size L x W x H: 2,5 x 1,2 x 1,2 in mm Maximum speed: 4 m/min Min.-max. glass thickness: 3 - 35mm Min.-max glass size: 100 x 100 -2000 x 3000mm Number of spindles: 7 spindles Condition machine : Excellent Control type: Semi-automatic Electric. Connection: 32A 3P+PE Photos/film available: Photo's available
Power cable, crane cable, conductor rail, plastic conductor rail, plastic conductor rail with junction box, safety conductor rail, compact conductor rail -Manufacturer: Vahle, plastic conductor rail with junction box -Type: KNKST 4/60 HS -Item No.: 0604-15530/0 -Dimensions: 1000/155/H190 mm -Weight: 3.0 kg
Complete system Dematic 84180 mm order picking system with empty crates accumulating roller conveyor with flow racks. RA1968 Complete line consisting of: Order picking with racks and flow-through infeed Passage Outgoing goods packing Shipping Order picking: Length: 84180 mm Frame width: 500mm Roll width: 440mm Undriven roller conveyor on both sides Two accumulation roller conveyors for empty and full boxes Roller conveyors are equipped with plates for pushing over the crates Pallet racks with flow inserts and pallet flow Flow racks with adjustable widths Passage: Consisting of vertical conveyors, incline and decline belts Shipping: Loops for packing and empty boxes 33 m loop for full crates 20 m loop for empty crates Overfeed and passage to connect loops with each other further transport with ascending belt to the stretcher several stretchers at outgoing goods Features: For a customiza ...
Length: 8000mm, width: 6000mm, weight: 30t, with staircase access, 360° catwalk and roll discharge. An on-site inspection is possible.
Used line for the production of cottage cheese and cream. New: 2010. cottage cheese preparation section coagulation boiler - 10m3 diaphragm pump - 10 m3/h final product preparation section whey separator - 10 m3/h creamer 09CR02 - 3 m3 (working capacity) cream dosing system FRISTAM pump - 5 m3/h input (pulp) dosing system FRISTAM pump - 2 m3/h static mixer product piston pump for Hugart packing machine – 2m3/h
SCHLEICHER WV-PL 160/800 coil feeding line was built in 1987 in Germany by H. Schleicher GmbH & Co. Maschinenfabrik. The line is used for the automatic feeding of material from a coil to presses and other machines used in metal forming. The automation of this process stage improves mass production, increases its efficiency and reduces the need for manual work. The SCHLEICHER WV-PL 160/800 coil feed line consists of a roller feeder, a straightening machine and a sheet metal decoiler. It is designed for coils with a maximum width of 800 mm and a weight of 200 kg. A 4 mm thick material strip is decoiled and straightened, then fed directly into the machine’s working area. The precisely adjustable feed rate ensures uniform strip feeding, which translates into process repeatability and stable operation of the entire line. All this makes the SCHLEICHER press feed line an excellent choice f ...
General Description Industrial automatic steel coil slitting and strip-processing line manufactured by ZMM Pobeda S.A. . Designed for longitudinal cutting of wide metal coils into multiple narrower strips with subsequent recoiling and material handling. The installation comprises a complete series of heavy-duty coil processing, slitting and recoiling equipment. Technical Details Manufacturer: ZMM Pobeda S.A. Machine type: Automatic coil slitting line Year: 2017 Serial number: 158 CE marked Hydraulic coil decoiler / uncoiler Expanding coil mandrel Coil hold-down / peeler system Strip feeding and guiding section Straightening / leveling rollers Multi-knife rotary slitting head Scrap / edge handling equipment Strip transport and guiding system Heavy-duty recoiler Hydraulic and pneumatic systems Electric drive motors and gearboxes Operator station with HMI / PLC control ...
General Description Automatic industrial bakery processing line manufactured by BACK-TECH Maschinenbau u. Handelsges.m.b.H. . Designed for automated production of round, long-moulded and stamped bakery products including rolls, Semmeln, Kaiser/Rosetta-style buns and Kornspitz-type products. The complete line is designed for high-capacity production with approximately one operator. :contentReference[oaicite:0]{index=0} Technical Details Manufacturer: BACK-TECH Maschinenbau u. Handelsges.m.b.H. Model: Mehrgebäcksanlage / Mega-Vario-Combi-Star Duo K/L Machine type: Automatic bakery processing line Year: 2001 Product weight range: Approx. 40–120 g Output: Up to 6,000 / 4,800 / 3,600 pcs/h depending on product/configuration Technical drawing output: 4,000 / 3,200 / 2,400 pcs/h for 5/4/3-row operation Power supply: 3 × 400 V, 50 Hz Total connected load: 25.4 kW Rated current ...
Complete professional oil mill & filling line incl. labelling technology, raw materials & bottle storage – turnkey For sale is a complete, professional production and bottling plant for cold-pressed edible and specialty oils. Ideal for farmers, direct marketers, founders or existing farms who want to set up or expand their own oil production. The package is perfectly matched to each other and enables immediate production to start from seed to the finished labeled end product. 1. Machinery & Production Technology - NF 500 oil press with infinitely variable speed control (year of manufacture 2020). Manufacturer: Nature Fuel Osnabrücker Ölmühle GmbH & Co. KG - Chamber filter press KKF200/10-2 (built in 2025, as good as new). Manufacturer: Oil press GmbH & Co. KG - Pneumatic oil filling machine (100 ml – 1000 ml) - Stainless steel container 590 liters with l ...
Blown film line especially for PP processing length: 6,300 mm width: 2,500 mm height: 4,200 mm Weight: 3.700 kg blowing capacity: 65 kg/hod. Film Thicknes: 0.015 – 0.1mm film width: 250 – 650mm Die- diameter 65 mm Winding speed: 5 – 60m/min. Power consumption: 72 kW
Used Tetra Therm Aseptic VTIS Plant Complete aseptic processing system designed for the sterilization and treatment of liquid dairy products. This Tetra Therm Aseptic VTIS plant is suitable for processing UHT milk and other high-viscosity products, offering reliable and efficient performance for industrial dairy production. Line Configuration The plant consists of the following main components: - Used Tetra Pak Sterilizer / UHT System - Used Tetra Pak Homogenizer - Tetra Pak Sterilizer / UHT - High-performance aseptic sterilization system for continuous processing of dairy products. Technical Details - Manufacturer: Tetra Pak - Model: Tetra Therm Aseptic VTIS F-12 - Year of Manufacture: 2010 - Capacity: 8,000 l/h - Running Hours: 15,284 Suitable Products - White UHT milk - Cream - High-viscosity dairy products Condition - Very good used condition Tetra P ...
In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units ...
Sortimat Feeding & Separation Module Manufacturer: sortimat Technology GmbH & Co. Year of construction: 08/2010 Machine No.: 000F20759 Module type: Spiral conveyor with linear conveyor line & bunker Feeding and separation unit from sortimat, consisting of a robust stainless steel spiral conveyor, linear conveyor line and feed hopper. The system is designed for the automatic sorting, feeding and separation of small components in assembly and production lines. The spiral conveyor has a stainless steel conveyor plate with Ø approx. 300 mm, multi-speed screw conveyor. The linear unit takes over the transfer of the components to downstream systems. The system is pre-assembled on a steel frame and has several adjustable sortimat control units (rail / spiral conveyor / bunker). The system comes from a running production line and shows typical signs of wear. Technical data: Stai ...
In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units ...
In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units ...
Used Stork UHT Plant – Model 2000 Reliable UHT processing plant designed for the sterilization and treatment of dairy and plant-based beverages. The Stork Model 2000 offers efficient thermal processing and is suitable for medium-capacity production of UHT products. General Information - Manufacturer: Stork - Model: 2000 - Refurbishment: Completely refurbished in 2015 - Condition: Very good used condition Technical Specifications - Capacity: 1,600 l/h - Control System: Siemens S7 PLC Suitable Products - The plant is designed for processing a wide range of UHT beverages, including: - UHT milk (plain / white) - Chocolate milk - Flavoured milk - Soya UHT drinks Key Advantages - Reliable Stork UHT processing technology - Completely refurbished in 2015 - Suitable for dairy and plant-based beverages - Equipped with Siemens S7 PLC control system - Compact solutio ...
Includes: DC Norris melting cabinets, tank systems, Riggs bottling line with cappers for jars and squeezies, line for hotel style mini jars, tub and bucket lines. etc etc
Key data: 30 mm, 28 , 110 U/min
Used Filament Line Single Screw Extruder 30mm 28L/D 2 meter water bath Trigger AB50 Winder W250 Machines from PMH GmbH
Compact slitting line, with uncoiler, loading prism, pressure arm AH 1500/5000 kg, clamping range 480 - 550 mm, with 3 arched tables, with 4 overflow tables, with 2 bases, with 2 stairs, with guillotine shears for cutting to length, foil holder with brake, with 5 pairs of knives Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1500 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminium: 2.5 mm Sheet thickness front: 1.0 mm Color: Blue Total power requirement: 3 x 400 V Machine weight: 9100 kg Dimensions: 11541 x 5300 x 1770 mm Coil weight: 5000 kg Straightening rollers: 7 Number of blades: 5 pairs Straightening rollers at the top: 3 Straightening rollers at the bottom: 4 Speed: 35 m/min Machine Number: K08258
SPECIFICATIONS: A. Grinding unit with 3 rollers Reel 1 - 85 Shore Reel 2 - 65 shore Reel 3 - 55 shore Max. grinding width mm: 1350 Max. working thickness mm: 170 Diameter of the rollers mm: 250 Extraction system KW 5.5 Sanding belt mm: 1370 x 2620 B. Brush unit with 4 units Unit 1 - transverse, counter-rotating bogies Aggregates 2 and 3 - Longitudinal brushes Unit 4 - counter-rotating bogies Hydra V - PAD electronic control Equipped with 5 motorized Mahros conveyors width mm 1350 for workpiece selection and return
Complete THIEME 3050 screen printing line with TESOMA hot air + UV drying tunnel and automatic stacker at the outlet. Large format industrial assembly to be overhauled. THIEME 3050 screen printing Maximum print size: 1,400 x 1,800 mm Maximum sheet size: 1,430 x 1,870 mm Maximum frame size: 1,900 x 2,200 mm Maximum media thickness: 50 mm Squeegee speed: 0.2 to 1.4 m/s Fine screen adjustment: +/- 5 mm Machine-only footprint: 3,975 x 2,832 mm (L x W) Machine weight alone: approx. 1,900 kg Power supply: 400 / 230 V - connection power 2.8 kW TESOMA drying tunnel (2005) Hot air + UV drying Installed power: 60 kW - heating power: 43 kW Power supply: 400 V - 50 Hz - 134 A Recent UV lamp and conveyor belts New UV lamp sets included (in stock) Service meter read at 11,168 hours Additional equipment Automatic stacker at the end of the line Remova ...
Auction-ID: A1-50026-55
new
used
Qty. 1 Second-hand aluminium profile lamination line Mfc.: S.I.M. PACK Srl Model: SIRIO PROFILI TA/200/2S Built: 2011 Stopped: 2026 Voltage: 400 V, 3 ph., 50 Hz The machine applies the protective film simultaneously on 2 flat surfaces of profiles with a max. width 200 mm and height 200 mm and the cut of the film between the profiles is automatic. The machine in made up of a strong electric welded iron tubular frame on which there are: One unit for the dragging of the film on the upper and lower surface composed by a vertical column bearing no. 2 opposed rubbered rollers. No.1 Pulling unit composed by no. 2 rollers position at the exit of the machine. No. 1 Automatic cutting activated by pneumatic cylinder with vertical movement. No. 2 Idle roller table 2.5 m long, with PVC covered rolls and alignmentlocator to get a correct Alignment of the material to be coat with the prot ...
Easiweigh Ace 2V Linear weigher Serial: 991278 Stainless, single head linear weigher, with foot pedal, 1Ph
maximum number of results exceeded
please refine your search
30.000 € 
