136,088 used machines on RESALE, but how to find them? Machine Search
Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Reishauer, hob cutters, 3 pieces -Type: Ø 50 mm / Ø 55 mm / Ø 62 mm -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 115/65/H70 mm -Weight: 1.3 kg
Wet cutter for roof tiles, lightweight version for use on sloping roof surfaces
Router 600 router Spindle to arm distance 600 mm Twin speed spindle drive motor with 2.2/1.5 kw Two spindle speeds 9000/18000 RPM Spindle tilt angle adjustment 45-90-45 degrees Vertical spindle stroke 80mm Height-adjustable table Pneumatic control of the spindle from the pedal
serial number: 4412956673057 : 95 to. ca. engine output: 7,5 kW weight of the machine ca.: ca 5 t dimensions of the machine ca.: 2,2 × 1,0 × 2,3 m Technical specifications (from the label)Angle steel (L-profile):150 × 15 mm at 90°100 × 14 mm at 45°Flat steel:up to approx. 150 × 16 mmlarger cross-sections up to 340 × 16 mm (depending on function)Beam profiles:U-profiles (UPN): 220I-sections (IPN) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Polar 115 ED AT Autotrim Optionally available Jogger RA-4 Year 2007 Lift LW 1000-4 Year 1999 Transomat TR 130-EL-4 Year 2001
Manufacturer: Trumpf Model: Trumatic L3030 Type: TC L3030 Laser type: CO2 Laser power: 4,000 W Year of manufacture: 1999 Electrical and Utility Data - Mains supply: 400 V / 50 Hz - Connected load: 88 kVA - Control voltage: 24 V - Compressed air: 6 bar Condition and Availability The machine was in continuous production use until November 2025 and remains powered on.The resonator has been replaced once during its service life. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Cutting length: 1700mm, squeegee rubber thickness: 5-10mm, coolant consumption: approx. 0.04l/m, connection voltage: 400V, 50Hz, 3 phases, connected load: 1kW, compressed air connection: 6bar, compressed air consumption: 2.5l/min, length: 2900mm, width: 784mm, height: 1250mm, weight: 430kg. An inspection on site is possible.
A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement.
Hydraulic veneer cutter MONGUZZI mod. 3200 used theoretical useful cut mm. 3200 nr. 2 motors installed power HP 10 Motorized rear guide with mechanical display Cutting height REER safety barrier (new) for finger detection - security level type 4 - Machine length mm. 4400 Weight kg. 3800 overhauled machine, in excellent condition CE compliant
Max. punching capacity: 400 kN Max. shear capacity: 600 kN Punches 20 mm holes in 16 mm steel Shears on the flat steel shear to 300 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired Weight: approx. 1,500 kg
Speed: 2880 RPM, Hopper: 300 litres, Power: 3 x 380V, 50Hz, 27 kW, Dimensions: 900 x 1100 x 1550 mm
There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible.
round bar steel: 32 mm square edge steel: 60 x 6 mm L-beam: mm pressure: 50 t stroke: 10 - 28 mm total power requirement: 4 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 0,65 x 1, 2 x 1, 67 m Maximum pressing force 50 t FLAT STEEL SHEAR PERFORMANCE Flat steel: 150 x 15 mm or: 180 x 18 mm PERFORMANCE OF PROFILE STEEL SHEARS Steel 90°: 80 x 8 mm 45°: 50 x 6 mm Angle steel 90°: 100 x 10 mm 45°: 50 x 6 mm PERFORMANCE OF BAR STEEL SHEARS Round steel: 32 mm Square steel: 30 x 30 mm PERFORMANCE SQUARE NOTCHER: 60 x 6 mm Sheet metal up to: 10 mm Notch width: 42 mm: Notch depth: 55 mm PERFORMANCE HOLE PUNCH Punching force: 50 t Stroke: 10 - 28 mm Punches: 27 in 14 mm Projection: 155 mm GENERAL DATA Drive power: 4.0 kW Oil capacity: 40 lDimensions L x W x H: 650 x 1200 x 1670 mm Weight approx.: 840 kg Translated with DeepL.com (free version) The data for this ad was creat ...
Key data: 2
Wigo Copy Milling Machine Type: 1075 1 milling motor each on the right and left 5.5 kW each Spindle diameter 30 mm Milling spindles run in the same and counter-rotation Running direction can be switched Milling process via scanning with thrust ring Working length max. 1400 mm Working width max. 210 mm Working height max. 90 mm 2 pneumatic clamping cylinders from above 2 x pneumatic side pressure with 2 straight milling heads milling height 50 mm Dimensions Length 3200 mm x W 1200 mm x H 1600 mm Weight approx: 1000 kg
Manufacturer: Perndorfer Model: WSS5020/1HD18 5/1ASK Year of Manufacture: 2011 Operating Voltage: 400 VAC Frequency: 50 Hz Back-up Fuse: max. 40 A Control Voltage: 24 VDC BHDT High-Pressure Intensifier - Manufacturer: BHDT - Type: Intensifier - Max. Working Pressure: 400 MPa (4,000 bar) - Max. Flow Rate: 3.8 l/min - Manufacturing Week/Year: 47 / 2011 NOT IN WORKING CONDITION / 100 HOURS ON METER Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Adige Model: Lasertube LT722D Technical Details: - Laser Source: Rofin Sinar DC25 - Laser Power: 40 kVA apparent power - Minimum Bar Length: 3200 mm - Maximum Bar Length: 6500 mm - Max Bar Weight (L=6500): 100 kg - Max Bar Weight (L=8500): 130 kg - Round Section Diameter: 12 to 140 mm - Round Section Optional: 12 to 152.5 mm - Square Section Side: 12 to 120 mm - Max Circumscribed Circle: 170 mm - Minimum Side Dimension: 10 mm - Maximum Side Dimension: 140 mm - Max Side Dimension Optional: 150 mm - Max Load Saddle Capacity: 4000 kg - Power Voltage: 400 V +/- 10% - Frequency: 50 Hz - Type of Power: Three phase without neutral - Total Machine Power: 26 kVA - Enclosure Protection: IP54 - Hydraulic Reservoir Capacity: 25 l - Hydraulic Pressure: 70 bar - Pneumatic Pressure: 6 bar - Pneumatic Capacity: > 500 Nl/min - Weight L=6500 version: 9000 daN - Weight L=8500 version: 1000 ...
gebr. Carpentry machine - tenon cutter REX ZA-800 S YOC 1989 Total connected load: 17.4 kW Cross-cut saws: Motor power: 5.5 kW can be swivelled +/- 60° on both sides Side adjustment by handwheel - travel 350 mm Max. saw blade diameter: 800 mm Max. cutting height: 315 mm Suction connection: 120 + 80 mm Cutting Saw - Slotting Unit: Motor power: 9.0 kW Swivels forward 45° Height adjustment by handwheel - travel 160 mm Max. saw blade diameter: 500 mm Max. slot depth: 215 mm Extraction connection: 140 mm Settling circular saws: Motor power: top 2.2 kW / bottom 2.2 kW Complete sawing unit can be swivelled forwards up to 45° Additional double swivel (forward + backward) of the individual settling saws by +/- 30° possible Max. saw blade diameter: 450 mm Max. cutting depth: 160 mm Extraction connection: 2 x 60 mm Sliding table: Hinge can be swivelled up to ...
Manufacturer: Trotec Model: Speedy 500 C200 Year of Manufacture: January 2013 Technical Specifications - Input Power: 3x400VAC+N+PE, 7.2A, 50Hz - Nominal Power: 4.5 kW - Laser Type: CO2, 200W continuous wave, 10.6 micrometers wavelength - Laser Diode: less than 0.99 mW continuous wave, 655nm - Wiring Diagram: SP500_200W_V1.0 - Safety Standard: EN 60825-1 (2007) Find more here - .ucymachines/ Contact us at - sales@ucymachines
: 50 t. weight: 1,8 t hydraulic: ja round bar steel: 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting range for steel to: 0,5 - 120 mm capacity at 100%: 440 A mm cutting medium: PerCut 451 dimensions: ca. 1030 x 680 x 1450 mm weight: ca. 600 kg Contour Cut Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness Contour Cut Speed Contour cutting in mild steel with similar quality and up to 50 % higher speed Silent Cut Cutting of mild steel with reduced sound pressure level HiFinox Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross Ar/H2 Mix Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm Marking, notching, punching Individual labeling of the material The HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 12 ...
With lifter for 200L tote bins, tool trolley and pallet of spare parts, knives and hole plates., Hopper prepared for steam injection., Capacity: max 4500 kg/h, Bowl: 570 litres, Hole plate diameter: 225 mm, Knive speed: 3000 RPM, Infeed height: 1850 mm, Vacuum pump: Elmo-F 2BV5 111 liquid ring, Compressed air: 6 - 8 Bar, 85 Nl, Water: R 1, min 2 Bar, Power: 3 x 400V, 50Hz, 200kW, Dimensions: 3850 x 2800 x 2850 mm, Weight: 5800 kg
Polar 92 E Year of Make: 2000 E version, air table, 2x side tables Formica large, Spare blade. Immediately available!
Polar 66 E Year of Make: 2007 E Version Spare blade Very good condition - little used! Immediately available
Key data: 2 , 1300 mm
Copy milling machine Longitudinal copy milling machine Wigo Automatic Double Copy Milling Machine Type: 1075 For milling 2 opposite sides, including rounding of the front Maximum working length for workpieces with straight ends: 1300 mm Maximum working length for workpieces with rounded ends: 1000 mm Working width maximum 200 mm Processing height 90 mm, including milling heads 90 mm 2 milling motors motor power approx. 5 kW Spindle diameter 30 mm With thrust rings Continuous table feed 0.5 – 12 m/min Hydraulic motor feed 1.1 kW Return speed 25 m/min. Speed of the milling spindles optionally 7500/9000 rpm. Tool diameter maximum 120 mm 4 pneumatic clamping cylinders from above Operating pressure max. 6 bar Weight approx. 900 kg Dimensions approx. 3200 mm x W 1200 mm x H 1600 mm It is particularly suitable for precise and serial processing of symmetrical wo ...
Table dimensions: 1300-800 mm Weight: 4,7 to. Year: 1979 x-travel: 1000 mm angular milling head: ja documentation: ja serial number: 733 weight of the machine ca.: 4,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible.
width 78 cm Age 2007 computer control with monitor Touch Screen air table 2 side tables Delivery time: Immediately Ref: PO250119A
-Year 1989 -3 knives trimmer -Height of staples: up to 100 – 125 mm -Mechanical speed: 20 – 50 staples/min -Format in operation without automatic feeding: -Max. untrimmed 315 x 460 x 80 mm -Minimum Book Size: 70 mm x 80 mm -Maximum Book Size: 300 mm x 44 0mm -Automatic infeed -Offcut blower -Central lubrication -Equipment for changing the format -many set of clamp plates & plate holders -1 set of knives -Machine full and complete in very good working conditions -Totally refurbished with all new electric cabin -Tec-Graf automatic pre-stacker, counting and feeding station -Connection belts between pre-stacker and the three knives trimmer -Available immediately
Weight: 1,3 t turning length: 40 mm cylinder: 0-0,5 rapid traverse: 3,7 m/min reus: U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
THREE KNIVES TRIMMER KOLBUS MD 155 -Year 1985 -Max untrimmed length 320 mms. /Max untrimmed width 460 mms -Min untrimmed length 11 mms. /Min untrimmed width 12 mms. -Max trimmed length 31 mms. / Max trimmed width 44 mms. -Min trimmed length 10 mms. / Min width 11 mms. -Automatic book infeed -Control cabin -Max speed 45 books/min -Three set of knives -Tools, accessories, in good working conditions
Digital program Central air table CNS chromed tables Light guards 2 Knives Tools, manuals with electrical diagrams etc. Complete cleaned, checked and tested
round bar steel: div mm square edge steel: div mm L-beam: div mm No. 2984: 1 used plate, profile and bar shear with notcher 50 to manufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965 No. 3418: 1 used combined section shear 80 tonnes manufactured by PEDDINGHAUS, type 210 Super 16, built ca85 Cuonnbjt0a No. 3668: 1 used steel section shear + punching machine 95 to PEDDINGHAUS, type 210 Super 20, year of construction 1978 Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnes No. 3286: 1 used steel profile shear 65 to MUBEA / MUHR & BENDER, type KBL 16 N No. 1096 1 used hole punch 26 to EDEL SMO 26, various accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
puncher: 100 t round bar steel: 50.0 mm square edge steel: 50 x 50 mm L-beam: 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.): Ø 30.0 x 26 mm shear: flat material: 600 x 15 mm throat: 300 mm work stroke: 80.0 mm work height max.: 1165 / 960 mm total power requirement: 9.0 kW weight: 2250 kg range L-W-H: 2050 x 1200 x 2050 mm well-maintained condition () current new price approx. 30.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations Flat steel shears Profile steel shears Hole punch notching station - driven by two hydraulic cylinders - Infinitely variable stroke adjustment - Support table at hole punching station - Material scraper - Lateral storage options - 2x freely movable foot switches - Many accessories included in the scope of delivery swiveling machine lamp Various punch dies Spare blades for the ...
round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weight: 10 kg Year: ca. 2009 : x Table dimensions: mm Motor output: kW Spindle diameter: mm reus: U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Universal Engraving Cutter Grinding Machine KIRBA UG1 – Cutter Grinder Power of the drive motor: 0.25 kw Grinding spindle speed: 4500 rpm Speed of the grinding spindle optional: 2250/ 4500 rpm Shafts ø grinding spindle 20 mm Outer diameter of the cup wheel: max. 75 mm Inner diameter of the cup wheel: max. 50 mm Machine footprint: 400 X 300 mm Height of the machine: 500 mm Weight of the machine: approx. 40 kg. Technically fine. With machine table and Waldmann work light. Tool holder without original collet. Without cup wheel for HSS milling cutters. Machine Type: Twist Drill Grinding Machine, Grinding Machine, Angle Grinding Machine, Rotary Steel Grinding Machine, Thread Grinding Machine Drill bit grinder, milling cutter grinder, surface grinder, drill bit grinder, bench grinder, burin grinder, Engraving cutter grinder.
Manufacturer: Trumpf GmbH, Germany Model: TruLaser 5040 Year of Manufacture: 2007 Type: CNC laser cutting machine Technical Specifications - Laser output power: 5,000 W - Mains voltage: 400 V / 50 Hz - Connected load: 105 kVA - Control voltage: 24 V - Required fuse protection: 3 x 160 A - Compressed air connection: 7 to 10 bar - Nitrogen connection (N2): 30 bar - Oxygen connection (O2): 20 bar CO2 Find more here - .ucymachines/ Contact us at - sales@ucymachines
tool adaptor: Sk 50 weight: . kg material: . Approx. 38 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool adaptor: Sk 50 weight: . kg material: . Approx. 40 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool adaptor: Sk 50 weight: . kg material: . Approx. 31 piecesThe techn. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
conus taper: . mm tool adaptor: . weight: . kg material: . Various MK holders, quick-change holders, thread cutting adapters. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1150 mm y-travel: 350 mm z-travel: 500 mm table surface area: 1500x380 mm turning speeds: 42-1400 U/min spindle taper ISO: 50 tool clamping electrical: bore stroke: 110 mm total power requirement: kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: m 9 kW, Diagram No.: 152.29.80.20, with control panel, control cabinet, plastic sideboard, operator mat, and hydraulic vice The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by a ...
Table dimensions: . mm Motor output: 9 kW Spindle diameter: . mm reus: U/min Weight: kg Year: 0 9 kW, Diagram No.: 152.29.80.20, with control panel, control cabinet, plastic sideboard, operator mat, and hydraulic vice The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table dimensions: . mm Motor output: . kW Spindle diameter: . mm reus: 100 - 1500 U/min horizontal: . The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool adaptor: Sk 50 weight: . kg material: . Approx. 32 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool adaptor: Sk 50 weight: . kg material: . 20 cutter heads The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
