meat cutter used for sale

RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)

Late model Hobart commercial meat saw. Model 6801, serial number 31-1464-941, 200/230volts and 3 phases. Tested. Comes with one 142" blade. Unit has normal wear of used equipment, will require some extra cleaning.

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 6.000 kg/h Electric power: 55 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 131 Length: 205 Height: 245

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 8.000 kg/h Electric power: 66 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 235 Length: 200 Height: 185

REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm

Mixer meat 70 liter, NEW Capacity: 35kg Dimensions: 78x61x74cm Power: 2.2kW

Meat mixer Sind 120 liter, NEW Dimensions: 860x510x1100 cm Power: 1,5 KW

We are selling here a metal detector from the manufacturer Mesutronic, type Meatline 07 O in a very good, used and functional condition. The machine runs on 230 volts, built in 2016, completely stainless steel, passage 55 mm, touch control, for connection to filling machine, was only used for test purposes, rollable, workshop tested, immediately ready for use, dimensions W/D/H 40/60/140 cm, others on request.

The metal separator was only in use for a short time and makes a new impression Operating instructions available Availability: immediately

GROTE 613-VS2 SLICER WITH 18 PRODUCT HOLDERS (MOST NEVER BEEN USED) AND EXTRA REPLACEMENT PARTS-> 2 PULLYS, PUMP, SEAL, BEARING, BLADE, PULLY HUB ALONG WITH A BOX OF 25 ACCUBAND BLADES. THIS SLICER SHOWS LIKE NEW

Experience precision slicing with the Industrial meat slicing machine, an essential addition to any commercial kitchen or abattoir. Designed for versatility, this mutton and beef slicer effortlessly handles a variety of meats, ensuring uniform thickness and optimal results for your culinary creations. The robust construction and user-friendly design of this Chinese meat slicer make it a reliable choice for busy food establishments. Whether you're preparing deli meats or creating gourmet dishes, this slicer's durability and performance cater to the demands of your business.

Thompson Meat Machinery paddle mixer-grinder, type: 3000, serial number: 3000 M1 2 63, year of construction: 03-2014, 415 V, 50 Hz, 21.7 A, 9.2 / 1.1 kW, diameter plate: 130 mm, total dimensions: 1160 mm x 1100 mm x 1600 mm. Incomplete, missing plates and knives.

Thompson Meat Machinery grinder, type: 900-MM, serial number: 900-455, year of construction: 6/03, 240 V, 50 Hz, 20.2 A, 3.7 kW, 1430 rpm, diameter plate: 100 mm, total dimensions: 1000 mm x 900 mm x 1400 mm. Without plates and knives.

Thompson Meat Machinery paddle mixer-grinder, type: 3200, serial number: 3200 M 1 06, year of construction: 10-2014, 400 V, 50 Hz, 41.65 / 19.6 A, 2.2 / 9.2 kW, diameter plate: 130 mm, total dimensions: 1200 mm x 1200 mm x 1720 mm.

Thompson Meat Machinery mobile paddle mixer-grinder, type: TMG 900 M, serial number: TMG / 900M / 570, year of construction: 05.2004, 415 V, 50 Hz, 11 A, 4 / 1.1 kW, diameter plate: 98 mm, total dimensions: 1200 mm x 1200 mm x 1300 mm. Incomplete, missing plates and knives.

Manufacturer: Ruhle Type: Frozen block cutter Model: GFR 450 Infeed dimensions: 450 mm x 330 mm Knife width: 450 mm Total dimensions: 1700 mm x 700 mm x 1450 mm Voltage: 400 V, 3 Ph, 50 Hz Power: 5.5 kW, 16 A

Conveyor width: 600 mm Cut by knife cylinder Cutting width 7,0 mm Supply and unloading conveyor Machine dimensions in cm: Width: 120,0 Length: 170,0 Height: 130,0 Voltage: 400 V, 50 Hz

Height=1.63 m, Overall length= 0.96 m, Overall width= 1.06 m, Net weight= 329 kg,

Seydelmann cutter 120 liter, type K 120 AC Completely made of special stainless steel 120-liter bowl made of stainless steel Frequency speed regulator 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side Main cover is made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 190 depth: 150 height: 180 Main motor power: 40 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power

Cutter ALPINA 500 VACUUM After capital renovation. 3-month warranty on parts. All bearings and sealings in this machine are new. General overhaul of the vacuum pump, actuators and hydraulic pump. New electrical cables. New hydraulic cables. New control panel and controls. New set of knives. Delivery time: 4 weeks - now during renovation. 15% prepayment.

Cutter Manufacturer: Krämer Grebe Wetter Stainless steel Capacity: 65 liters 2 knife speeds 6 knives Power: 25kW

Frozen block cutter Manufacturer: Magurit Stainless steel Cutting dimensions: maximum cutting size 750 x 480 x 240 mm Motor: 4 kW hydraulic Power: 400 V / 50 Hz Dimensions: 1700 x 1100 x 1850 mm 3 knives

Rex hydro cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment

CNC unit with oscillating cutter head Brand: Atemag Type: Function Line Soft Cutter Pro Max. drive speed 6.000 R.P.M Max. tool spindle speed 9.000 R.P.M. (Frequency 150Hz) Gear ratio i = 1:1,48 Torque max. 8Nm Amplitude: 4mm

REF-1059 CRM NEXUS 220 CHOP CUTTER Manufacturer: C.R.M. Model: NEXUS 220 Year: 2003 All stainless steel Power: 4 kW Voltage: 400 V / 3-phase Mobile on casters Max. product dimensions: length 100 cm, with 22.5 cm, height 27 cm Overall dimensions: length 221 cm, width 85 cm, height 136 cm

Main technical parameters: 1. Production capacity: 3000kg/h Total power: 11kw material channel width: 540mm Material channel height: 240mm Cylinder stroke: 700mm Gas source pressure: 4-6 kg/cm 2 Processing raw material meat specifications: 700 × 520 × 200 (mm) Weight: 800kg External dimensions: 2150 × 1030 × 1220 (mm)

General SKU212X069 LocationBarneveld MakeUrschel Type3600 No.2132 Year of construction1997 Main Features MaterialStainless steel Motor7.5 KW Specified Features - Cutter MaterialStainless steel 1.4301 (304), Stainless steel 1.4542 (17-4 PH) Cuttercheck Knife diameter152.4 mm Number of knife blades4 With hoppercheck Inlet300x150 mm Outlet420x150 mm Motor7,5 kW, 220-240/380-415 volt, 2900 rpm With variable speed drivecheckfrequency converter Speed2900rpm Information Mounted on wheelscheck With switchcheck Weight181 kg CEcheck Floorspace1,00x0,60 m Total height1,15 m Extra SpecificationsWith 8 extra cutting headsCuttersUrschel UsaMills > CuttersBrand > Urschel Usa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...

General SKU350W923 LocationBarneveld MakeStephan TypeUMB40 Main Features MaterialStainless steel Volume40 Ltr. Motor5.5 KW Specified Features - Cutter MaterialStainless steel (Sandvik 1200SA) Cuttercheck Capacity40 l. Diameter500 mm Depth250 mm Knife diameter300 mm Number of knife blades2 Outlet100 mm Can be tiltedcheck Motor5,5 kW, 380 volt, 2870/1420 rpm Speed1420/2870 rpm Information No.25706A Year of construction1976 Mounted on wheelscheck With switchcheck Floorspace0,80 x 0,70 m Total height1,10 m Extra SpecificationsThe vessel is made of stainless steel. : : The blades and lid are made of aluminum. : : CuttersStephanMills > CuttersBrand > Stephan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

General SKU379X946 MakeMonTech LocationBarneveld CEcheck TypeCP 3000 Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Cutter Cuttercheck MaterialStainless steel Information No.210 MI 687 Year of construction2021 Floorspace0,90 x 0,70 m Total height1,085 m Weight225 kg Extra SpecificationsLarge rubber and Polymer Bale Cutter Operation / throughput: up to 12 cuts/min (cutting &: lifting speed adjustable) Max cutting width (bale width): 520 mm Max cutting height (bale height): 240 mm Cutting force (adjustable): 0.6 t @ 2.0 bar up to 4.6 t @ 10.0 bar Knife: hardened, precision-ground: monoblock cutting knife (tool steel, fully hardened) Material infeed: rear roller conveyor, total length 750 mm Safety: pneumatic two-hand operation (anti-tiedown) + transparent safety shields Utilities: compressed air min. 2 bar (5 bar recom ...

General SKU347X812 MakeStephan LocationBarneveld CEcheck TypeUM 60E Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume72 Ltr. Motor0.37 KW Specified Features - Cutter MaterialStainless steel 1.4301 (304) Bowl cuttercheck Capacity72 Ltr. Diameter500 mm Depth360 mm Knife diameter330 mm Number of knife blades2 With scrapercheck With hoppercheck Inletø 150 mm Can be tiltedcheck With jacketcheck 7,5 Ltr. Max. temperature95 °C Motor0,37 kW, 220—240/389—415 V, 1380 rpm Speed31 rpm Information No.732849 Year of construction2008 Mounted on framecheck With switchcheck Floorspace0,90x0,65 m Total height1,80 m Weight200 kgCuttersStephanMills > CuttersBrand > Stephan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

General SKU212X068 MakeUrschel LocationBarneveld CEcheck Type3600 Main Features MaterialStainless steel Motor7.5 KW Specified Features - Cutter MaterialStainless steel 1.4301 (304), Stainless steel 1.4542 (17-4 PH) Cuttercheck Knife diameter152,4 mm Number of knife blades4 With hoppercheck Inlet300x150 mm Outlet420x150 mm Motor7,5 kW, 220-240/380-415 volt, 2900 rpm With variable speed drivecheckfrequency converter Speed2900rpm Information No.2131 Year of construction1997 Mounted on wheelscheck With switchcheck Floorspace1,00x0,60 m Total height1,15 m Weight181 kg Extra SpecificationsWith 8 extra cutting heads and extra knifeCuttersUrschel UsaMills > CuttersBrand > Urschel Usa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect  ...

General SKU354T1001 MakeUrschel TypeGK No.2017 Year of construction1983 Mounted on framecheck Main Features MaterialStainless steel Motor1.5 KW Specified Features - Vegetable cutter MaterialStainless steel Vegetable cutters Cuttercheck Continuous cuttercheck Number of knife blades8-25 With scrapercheck Inlet460x250 mm Outlet180x Motor1,5 kW With variable speed drivecheck Information LocationBarneveld With switchcheck Floorspace1,87x1,17 m Total height1,2 m Weight470 kg Extra SpecificationsTYPES OF CUTS: SLICES: 1.6 to 19.1 mm DICES: A slicing knife, crosscut knife spindle and circular knife spindle are used for dicing. Changing the size of the cubes is done by using the required cutting spindles and adjusting the slice thickness. :Slice thickness: 3.2 to 19.1 mm  :Crosscut knives: 7.1 to 22.2 mm  :Circular knives: 2.4 to 76 mm STRIP CUTS: To make strip c ...

General SKU436X1380 LocationBarneveld CEcheck MakeStephan Pressure Working pressure1.5 Bar Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume58 Ltr. Motor7.5 KW Inlet diameter70 mm Specified Features - Cutter MaterialStainless steel 1.4301 (304) Cuttercheck Capacity44 l Diameter500 mm Depth350 mm Knife diameter250 mm Number of knife blades2 With scrapercheck 0,37 kW With hoppercheck Inletø 70 mm Outletø 70 mm With jacketcheck Max. temperature133 °C Motor7,5 kW (400 V) With variable speed drivecheck Speed300—3000 rpm Magento base g_extra_specifications7,5 KW Information TypeUMM/SK 44 E No.728080.01 Year of construction2001 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace2,20 x 0,75 m Total height2,00 m Weight450 kg Extra Specifications Includes a GEA plate heat exchang ...

General SKU004Y068 MakeAlexanderwerk TypeGKM No.21313 Year of constructionunknown Mounted on legscheck Main Features MaterialStainless steel Motor1.3 KW Specified Features - Vegetable cutter Vegetable cutter/Planetary mixer (1x) With motor1,1/1,3 KW, 380 Volt With hoppercheck MaterialAluminium, Stainless steel Information LocationBarneveld Mounted on wheelscheck With switchcheck Extra Specifications- With Schneidaufsatz - With Zweikammeraufsatz - With Planeten-Rühr- und Schlagmaschine type PMA-20 Vegetable cuttersAlexanderwerkMills > Vegetable cuttersBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

cutting knife for AccuSet - all details can be seen on the picture. The cutting knife is tested and comes from a functional AccuSet. Available on stock

AGFA knife for SelectSet 5000. Including knife holder and dental equipment. Available now

AGFA drive motor of the knife for SelectSet 5000. Including dental equipment. Available now

AGFA Motor for the cutter of SelectSet 5000. Including Belt. Available: now

AGFA Cutter for SelectSet 5000. Including Belt, Stillage and Knife. Available: now

Cutter for AccuSet - see all details in the picture. The Cutter is tested and is out of a well working AccuSet. Available: on stock

For sale is a BOXMAKER® cardboard machine from Horstmann Maschinenbau for the flexible production of tailor-made shipping boxes – exactly in the required size and quantity. Your advantages at a glance: • Producing cartons "just in time" – individually controllable via touch panel • Reduction of storage costs and filling material • Reduction of shipping costs through custom-fit packaging • Less transport damage, higher customer satisfaction • Processing of continuous cardboard or sheets, complex cuts possible Ideal for industry, wholesale, fulfillment and e-commerce that want to make packaging processes more economical, sustainable and independent.

GERBER Cutter Z7 automatic cutting machine was built in 2016 in China by Gerber Technology (Lectra). The machine is used in the production of clothing and all sewing products. It can cut both single and multi-layered fabrics with a maximum thickness of 7.2 cm (after compression). Cutting is performed by means of a robust, vertical oscillating knife, which ensures the highest cutting precision and shape repeatability regardless of the type of material. The advanced Knife Intelligence Plus” system controls the movement of the knife, changing its angle, cutting path and acceleration in real time to ensure precise cutting of repeatable parts for all layers every time. Cutting paths are additionally optimised by the SMARTbite system, which automatically adjusts the knife advance speed based on the height and type of overlap. The oscillating knife is continuously sharpened during cutting, ...

AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile

Herbort Cube Cutter 10/10

AFT Sandwich cutter Serial: 135012 Stainless frame, automatically cuts sandwiches into halfs, ensures clean and centered cut on all types of sandwiches, belt width 150mm, overall length 2200, mobile, 3Ph

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

Shaper cutters from Module 1 to Module 14 available: - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fogg & Young Bale Cutter

NNP Pneumatic grid cutter Stainless pneumatic cutter, ideal for fruit and veg, mobile frame