subcategories
(3rd category level)
Manufacturer:
(Category: 703)
Type of mixer Height 2050 mm Width 2300 mm Length 1200 mm Capacity 700 l Power supply: 400V 50Hz 3N Stirrer Type Spiral Agitators Product ejection Pneumatic flaps, front flaps Loading No loading, it is possible to buy a pillar loading for the machine Mixer Type Open Mixer Number of rollers Twin shaft
Type Vacuum tumblers Height 2100 mm Width 1900 mm Length 1800 mm Weight 1100 kg Capacity 300 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Solenoid Valve Variable speed control of the tumbler Smooth adjustment of the barrel speed Cooling jacket tumbler Yes, refrigeration unit built into machine design Loading Loading integrated into the machine
Type Vacuum tumblers Height 2150 mm Width 2200 mm Length 1400 mm Capacity 600 l Power supply: 400V 50Hz 3N Total power 4.8 kW Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Solenoid Valve Cooling jacket tumbler Yes, refrigeration unit built into machine design Loading Loading integrated into the machine
Sparc Cerberus Combination unit Fortress Metal detector head Usable aperture - 350mm x 120mm Conveyor - 300mm Weigh Table length - 520mm Right to left direction Ply belt 16amp single phase plug machine is fully tested and working with new belts, bins supplied and all fail safes working Lockable bin, bin full etc Supermarket Spec
Used through-cutter MEISSNER, type: RSM 65 -overhauled- - 65 litre bowl - Machine parts overhauled - Condition: Very good, ready to use Inspection and test run possible by arrangement.
Used continuous cutter SEYDELMANN, type: K206 DC8 -in used condition- - Speed variably adjustable and freely programmable - 2 speeds for reverse gear 80 and 160 rpm - Lifting tipper for 200 litre wagons - Head with 6 blades - Completely made of stainless steel - Separate Micro 114 control system in VA - Condition: used, technically tested, ready for immediate use Service: - Regular maintenance - Lubrication of the main shaft - Replaced fan bearings for cooling - Inspection of the main engine - Electrical inspection - The bearings of the main shaft are in good condition Specifications: Bowl volume: 200 litres Power: max. 100 kW Machine dimensions: 2,850 x 2,950 x 1,500 mm Control dimensions: 1,200 x 500 x 1,900 mm Weight: approx. 3,000 kg Inspection and test run possible on request.
Vacuum filler HANDTMANN, type: VF 622 -in used condition- - Incl. AG - Incl. intestinal holding device HV - Incl. GD Wolf System - Funnel divisible 90/240 litres, made of chrome-nickel thal - Incl. integrated weight compensation - Incl. many perforated discs - Pump rotor with 12 blades - Servo gears - Monitor control with color display and program memory - Number of twists 0.5 - 10 (infinitely adjustable) - Automatic arm lifting and tilting device type 83-6, for 200 L loading trolley Specifications: Filling capacity 6,000 kg/h Filling pressure 40 bar Portioning 5 to 100,000g Portions max. 700 p./min. El. Connection 400 V, 50 Hz, 8 kW Total weight 1,400 kg The machine was completely overhauled. A viewing is possible by arrangement.
Modular Touch Screen Scale PC Scale METTLER TOLEDO Model: FW-T 6D B Proven quality from Mettler-Toledo! Year of Make: 2021 Calibrated until 31.12.2025 Colour: black 12.1-inch (30.7 cm) touchscreen 15.6" (39.6 cm) display 2-inch receipt printer (54 mm) Printer: Linerless Printer Interfaces: Gigabit Ethernet 10/100/1000; 1 x RJ11; 2 x USB; 2 x USB 3.0 Intel® Dual Core Up to 8 GB RAM; Up to 128 GB Flash DDR3 RAM; Solid State Disk (SSD) Microsoft Windows® 10 IoT 64-bit Shock-resistant die-cast aluminum housing with non-stick coating incl. 12" customer display incl. TK POS POS POS software Multigrade weigher: 3/6kg Graduation(s): 1/2g Minimum load (min): 10/20g The current model from Mettler Toledo prepared for TSE. incl. Windows and cash register option, which you need for TSE Fast Linerless / Receipt Printer up to 30 ...
Oven Alto-Shaam AS-2000, Holding Oven, Low Temperature Oven, 11 trays for 2/1 GN, with core temperature sensor, Temperature max. 150 °C, connection 230 V, 3 kW, Dimensions LxWxH approx. 88x80x65cm, weight approx. 130kg, good used condition, works perfectly
We are selling here a metal detector from the manufacturer Mesutronic, type Meatline 07 O in a very good, used and functional condition. The machine runs on 230 volts, built in 2016, completely stainless steel, passage 55 mm, touch control, for connection to filling machine, was only used for test purposes, rollable, workshop tested, immediately ready for use, dimensions W/D/H 40/60/140 cm, others on request.
LUTETIA IMPB MEAT INJECTOR & TENDERSIING MACHINE
used
SF Engineering mobile elevating belt, serial number: 141701. Ishida linear weigher with s/s platform, Model: CCW-NZ-108B-S/WP-BE. Serial: 50384 Year: 2007 Power: Single Phase NOTE Missing buckets Ilpra thermoformer, Model: Formpack F4. Serial: F374 Year: 2013 Power: 3 Phase
Two-chamber vacuum machine Ital Form Dimensions of the machine: 1845×868×1020mm Chamber dimensions: 880x755x170mm Sealing length: 820mm Number of heaters: 2 Electric power: 3kW Weight: 295kg
A versatile casing stuffing/clipping system. Suitable for applications such as: sausage, deli meats and ham; fresh ground meats; whole muscle meats; netted meats; non-meat sausage, hams, and deli meats; fresh ground fish; surimi/fish sausage paste; raw/frozen/refrigerated pet food; pumpable cheese; soup; sauce; ground fruits and vegetables
Cutter Manufacturer: Seydelmann Model: K 204 Ultra Made of stainless steel Volume: 200 liters 2 knife speeds 2 bowl speeds 2 mixing speeds Dimensions: 280x205x255cm Electric power: 78kW Voltage: 400V, 3 phases, 50 Hz
Boiling Kettle Manufacturer: Bastra Made of stainless steel Dimensions: 130x140x115cm Volume: 300 liters
Manufacturer: Maurer Type: Smoke chamber for 2 trolley Electric heating 48 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Without an after-burning system Installation dimensions of the machine in cm: Width: 158 Length: 250 Height: 250 Trolley dimensions in cm: 100 x 100 x 200
Manufacturer: Maurer Type: Smoke chamber for 3 trolley Electric heating 72 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood cheaps Without after-burning system Installation dimensions of the machine in cm: Width: 158 Length: 350 Height: 270 Trolley dimensions in cm: 100x100x200
Washing machine Manufacturer: Nowicki Model: MPU-600/1P Made of stainless steel Dimensions: 390x140x200cm Electric power: 7.7kW Voltage: 3 x 400V 50Hz Weight: 740kg
Product number: 2914 Type: AV250 Serial number: 06089-1 Year of construction: 2006 Hole plate diameter: 250 mm Hopper: 800 litres Power: 3 x 400V, 50Hz, 78kW Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg 3 speeds on feed screw, 2 speeds on working worm
Product number: 2912 Type: AV250 Serial number: 06090-1 Year of construction: 2006 Hole plate diameter: 250 mm Hopper: 800 litres Power: 3 x 400V, 50Hz, 78kW Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg 3 speeds on feed screw, 2 speeds on working worm
Product number: 2906 Type: FLC14000/600 Serial number: 418 Year of construction: 2008 Belt width: 600 mm Grill length: 13000 mm Retaining time: 2.5 - 50 min. Heating: thermal oil, 300kW Steam: 4 - 8 Bar Power: 3 x 400V, 50Hz, 18kW Dimensions: 15000 x 2200 x 3100 mm Weight: 10000 kg
Product number: 2901 Type: CRM400 Serial number: 334 Year of construction: 2002 Belt width: 400 mm Power: 3 x 400V, 50Hz, 1.7kW Dimensions: 2700 x 900 x 2200 mm Weight: 450 kg
Product number: 2898 Type: TD400 Serial number: 375 Year of construction: 2000 Belt width: 400 mm Power: 3 x 400V, 50Hz, 0.7kW Dimensions: 3000 x 850 x 1100 mm Weight: 250 kg With extra infeed conveyor
Product number: 2896 Type: Battermix skid Serial number: INDK12660 Year of construction: 2018 Never used, new on pallet Mixing tank Tank: 1500 litres, double jacket Mixer: high speed, 965 RPM Power: 3 x 400V, 50Hz, 4.55kW Dimensions: 1400 x 1250 x 2650 mm With Packo Inox pump, level sensor, temperature sensor and CIP Buffer tank Tank: 1500 litres, double jacket Power: 3 x 400V, 50Hz, 2.05kW Dimensions: 1250 x 1250 x 2450 mm With Packo Inox pump, level sensor, temperature sensor and CIP Circulation tank Tank: 1500 litres, double jacket Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 1250 x 1250 x 2450 mm With level sensor, temperature sensor and CIP Packo Inox circulation pup Type: FP2/32-160-552 Serial number: 176593 Year of construction: 2018 Capacity: 2 m³/h Flowmeter: Endress + Hauser Flowphant T DTT31 Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 450 x 800 x ...
Cutter Manufacturer: Alpina Made of stainless steel Volume: 200 liters
Hot counter + refrigerated counter on undertable with casters Dimensions undertable: H95 x W193 x D76 cm Hot Counter BETEC Execution: Hot counter GN 2/1 230V / 50 Hz Heat output up to 90°C the hot counters are lit up Total dimensions: H55 x W75 x D78 cm Year of Make: 2019 Chilled distribution depot: Bartscher Batida 2/1 Refrigerated display case / cold counter 2 x GN 1/1 with squared glass version 406051 This refrigerated display case / show display case from Bartscher is a guarantee for your good product presentation. Dimensions (W/D/H) cm: 75 x 77.5 x 60 cm Weight: 78.6 kg Capacity: 1 x GN 1/1-6.5 cm height (53x32.5cm) Technical services: Temperature range: +6ºC / +10ºC Version with convection cooling including lighting Connection: Connected load: 230 V /0.29 kW 1 phase / 50 Hz / 16 A with plug in Sch ...
Shop scales METTLER TOLEDO FreshBase Compact Specifications: Type: FB-C 06 Max.: 6/15 kg Min.: 40g e = 2/5g Year of manufacture: 2018 Large touchscreen in brilliant and high-contrast LED technology up to 3,000 items (shelf life, origin, etc.) Ethernet PC interface for computing Fast 3 in 1 Printer Choice of linerless labels or receipt printing Original price incl. VAT over EUR 6,900 Easy programming up to 16 sellers Programmable up to 500 PLU brilliant and insensitive touch Function checked, device ready for use Condition see original pictures! Call or email if you have any questions. 03423-706493
Wet belt grinding machine EDERTAL BSM 200 The Edertal wet belt sander is ideally suited for sharpening knives, hatchets, cutter knives, axes, etc. The wet grinding ensures a long service life of the cutting edges, as annealing of the blades is hardly possible. In addition, the permanent water cooling achieves an optimal and permanent sharpening result. The BSM 200 grinding machine is a compact, robust and high-quality grinding machine that is made entirely of stainless steel. The sanding belt attached to the right side is tensioned and aligned by a stable clamping device. On the left-hand felt disc, in combination with a polishing paste, the ground tools can be tightened and deburred. The design and the material used comply with the hygienic and occupational health and safety requirements as well as the EC directives. Specifications: Power supply: 230 V Input power: ...
Vacuum packer Dillmann Machine Systems DMS DMV 400 Specifications: 230 Volt / 50 Hz / 4 A Year of construction 2006 Weight: 40 kg Chamber size: D420 x W455 x H110 mm Sealing bar length: 430 mm Max. bag size: 390 x 450 mm Machine design Completely stainless steel Compact, solid design Surface ground Corrugated acrylic glass lid 2 inserts for different height levels in the chamber High-performance pump with 16 m³ capacity Easy to use Vacuum adjustable Welding time adjustable Stock machine, immediately available! Function checked, condition see original pictures. 03423-706493
SERVO
