measuring equipment used for sale

1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 2. Powder Coating Booth -KG DUO-01 3. Wagner powder coating plant, – Prima Sprint – 1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 1 Inner dimension length 1,500 mm 2 Inner dimensions width 1,200 mm 3 Internal dimensions height 1,750 mm 4 Outer dimensions incl. thermoblock length 2,250 mm 5 Outer dimensions incl. thermoblock width 1,815 mm 6 External dimensions incl. thermoblock height 2,006 mm, 2,296 mm incl. exhaust pipe 7 Substructure 1 set of steel profile 8 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 9 insulation walls, ceiling 1 set of rock wool 150 mm, floor is insulated with 50 mm 10 Floor Furnace Gets 2 Entry Rails for Tray Wagons 11 Temperature 220°C 12 fans 1 pc. 2,600 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal power 14 kW 15 hinged doors, single ...

Powder furnace el. or gas Powder curing furnace 6,500 x 1,900 x 2,000 mm 1 Inner dimension length 6,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 7,500 = 15,000 m³/h 10 electric motors 2 pcs 2x 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 110 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device fo ...

The continuous system consists of the following components: Chemical pre-treatment by spraying Dryer Powder coating system Powder curing furnace Conveyor technology (cycle method) Electrical control Overall length: 30,000 mm Overall depth: 4,300 mm Width: 6,500 mm Workpiece weight (max.): 100 kg Temperature: 220 °C Heat output: 80,000 W Workpiece width (max.): 800 mm Workpiece height (max.): 1,200 mm Workpiece length (max.): 2,500 mm Insulating material: Mineral wool 75 kg/m³ Insulating thickness: 150 mm

Powder curing furnaces in various sizes, gas or electric 1 Inner dimension length 1500 - 6,500 [mm] 2 Inner dimensions width 1700 - 1,900 [mm] 3 Inner dimensions height 2,000 [mm] 4 Steel profile substructure 5 walls Galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² 7 Floor furnace gets 2 entry rails for tray trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 electric motors 1 - 2 pcs 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal power 14 - 99 [kW] 12 hinged or sliding doors on one or both sides 2 - 4 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock Stainless Steel INOX AISI 316 Heating Electric or Gas Heat-Resistant Fans and Heat-Resistant Bearings, Thermoblock Has Overheating Protection

Used ISERNHÄGER Sourdough Line ASB 600 RM - 3pcs available - Capacity 600 litres Visits and test runs are possible by arrangement.

COMPONENTS OF THE SYSTEM Preheating oven Powder coating booth Fluidized Bed Powder Coating Lifting system Automatic Transport System – Conveyor Belt C-80 Electrical control and installation Transport and assembly Fluidized Bed Powder Coating Booth The powder is fluidized in the fluidized bed vessel when the part is preheated and positioned over the fluidized bed container. The lifting system lifts the fluidized bed tank and the part is coated. After the coating process is completed, the fluidized bed is lowered again and an air blowing system blows off the excess powder on the part. The process can be carried out fully automatically. The cab's system is designed for powder coating with powder recovery and consists of a powder chamber for powder application, a monocyclone and a post-filter for extracting powder residues Chamber dimensions Length: 2000 mm Width 1 ...

Powder coating plant (complete) with 3 zones of chemical pre-treatment and Hybird ovens (dryer and curing oven) Gas and electricity (gas or electricity also possible) The facility consists of: Chemical pre-treatment with reverse osmosis system Dryer with hybrid thermoblock Walk-in coating booth with extraction unit KG PSW 8000 Powder curing furnace with hybrid thermoblock Conveyor system with transverse displacement, manual Electric control unit Specification of production Type of workpieces varies Material of the workpieces Steel (other metals or multimetal possible on request) Maximum weight of the load carrier 200 kg System type: Manual conveyor Dimensions of the maximum workpiece in the curing furnace Max. length 3000 mm Max. width 1500 mm Max. height 1500 mm Dimensions of maximum workpiece in chemical pretreatment Max. length 3000 mm Max. width 800  ...

length: . mm height: . mm volt: U2 100 V ampere: I2 40-120 A volt: U1 380 V volt: U0 280 V ampere: I1 37-48 A Manufacturer number.17763 See type plate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 500 machines in stockMore than 8,500 m² of storage space, crane capacity 70 tMore than 10,000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-Sourdough Fast Fermenter -Model: BRSSF100 -Mobile on castors -completely in stainless steel -400 volts -1.5 kW -Year of construction 2012 -External dimensions approx.: 64x70x125cm WxDxH

Pneumatic semi-automatic filling machine. Dosing volume: 50ml to 1000ml.

Oven, doors single-sided, electric Dimensions: 3,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 54 kW Auxiliary heating: electrically indirect via thermoblock

Dimensions: Length: 7400 mm Width: 4000 mm Height: 3236 mm Extraction capacity: Q = 18000 m³/h P = 15 kW The cabin has a suction machine with filters to suck the powder from the cabin floor. The powder booth is set up in a pit to lower the entire height of the painting line. Manual doors are installed to enter the workpieces into the cabin. The overspray is extracted during powder coating via the floor. On the floor there is a grate for walking on and under the grate there is a second flat floor with automatic self-cleaning system, connected by air ducts with post-filter. A self-cleaning system automatically blows the powder from the bottom to the post-filter (suction machine) and consists of

Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock

Chemical pre-treatment 3 zones for powder coating with spray ring (automatic) and manual Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Max. workpiece dimensions (automatic): Length: 6500 mm Width: 1000 mm Height: 2300 mm Max. workpiece dimensions (manual): Length: 6500 mm Width: 2500 mm Height: 2300 mm Tanks are positioned at ground level with a sloping floor. Tank No.1 is thermally insulated and is heated by electric heaters. Achievement: 27 kW. Volume of each tank = 1.00 m³. For degreasing (1st tank), a medium pressure pump is used to operate the 1st spray system. The rinsing phases are also operated by a pump with medium pressure via the 2nd spray system. On the bottom i ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Chemical pre-treatment for powder coating (3 zones) 1 Dimensions of the cabin length 3900 mm Width 1600 mm Height 2500 mm 2 dimensions of the pre-treatment complete length 4000 mm Width 3000 mm Height 4000 mm 3 Passage opening width 1000 mm Height 1700 mm The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alarm indicating that the door can be opened and the workpiece can be pulled out. All pre-treatment functions a ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc  ...

Open Powder Spray Stand Dimensions: 2500 x 2250 x 2700 [mm] Extraction capacity: Q = 8000 m³/h P = 5.5 kW Filter: 1 stage: Filter cartridges 4 pieces à Ø 325 x 1000 [mm] 2nd stage: Pocket filter (absolute filter for fine dust) Note: The overspray during powdering is absorbed by the suction unit. The powder spray stand is delivered on rollers and is therefore mobile

Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Extraction capacity: Q = 18000 m³ P = 15 kW The cab has 2 doors on one side for the insertion/outlet of the workpieces. The components are pushed into the cabin for coating via the overhead transport system. Walls, ceiling and doors are made of panels. The filters positioned on the roof absorb dust and other particles from the outside, thus ensuring clean ambient air in the cabin. The overspray during powdering in the cabin is absorbed by the extraction unit

Siebler Stick Pack packaging machine with counter for counting and packing of micro tablets, 1 lane (more lanes available on request), capacity up to 30 sticks per minute. New machine

Working width: 300 mm Number of rollers: 2 St. Feed speed: 20 m/min. weight: 300 kg Dimensions (L/W/H): 4000x600x1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ultimate sealing flexibility with dual impression

welding current: max. 300 A open-circuit voltage: 55 - 76 V connected load frequency: 400 V weight: 75 kg Dimensions (LxWxH): 950 x 560 x 880 mm Inert gas welding machine: - with pulse function - 300 amps - 400 volts - hose package 3m. - ground cable - Wire feed rolls for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Salvagnini Mod. Performer Year 2000 Manual loading Manual blades

CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate

ADIGE BLM LT652 Model : LT652/B Year of Manufacture : 2002 Laser Generator: DC025 (2500 Watts) Loading Length : 6500 Drain Length : 4500 Hours of Electrical Panel : 60433 Tension Laser Ore : 62285 Chiller : recently replaced Disassembly options - available now.

Coupon holder; suitable for Vacuumatic Vicount 3 machines. Coupon holder; used for Vacuumatic Vicount 3 machines.

Brand: Rollepaal Pipe Extrusion Technology B.V. Model: RSV 8/1 Year of construction: 2005 Pipe outer diameter max: 8 mm Cooling length: 1000 mm Spray pump: 2.2 kW

Paper counting machine Vacuumatic Vicount 3 PB; serviced and inspected by Vacuumatic Customer Service; compressor overhauled; Air table 76x144cm; Touchscreen; Max. Counting speed 2500 rpm; Max. Stacking height 220mm; Paper weight 25-240g/m2; strip bullet hole; low meter reading 1.7 million Paper counter Vacuumatic Vicount 3 PB; checked and tested by the support of Vacuumatic; compressor rebuilt; air table 76x144cm; touchscreen; max.counting speed 2500 rpm; max.pile hight 220mm; paper weight range 25-240g/m2; tape insert; low counter 1.7 million

Screw packers for valve bags Stainless steel Suitable for food and pet food Revised and Function Tested Incl. net scale and new B+L weighing electronics Suitable for valve bags from 10.0 kg - 50.0 kg

Machine type: MIG/MAG welding machine Make ESAB Type LAN 400 Connection voltage 3 x 400 volts Adjustment range 45 – 400 amps Duty cycle 60% ED at 400 amps 80% ED at 355 amps 100% ED at 315 amps Current setting 40 switching levels 3 chokes for the ground cable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feeder 4-roller drive Fuse 20 Ampere Dimensions L x W x H 900 x 700 x 990 mm Weight 192 kg Age approx. 15 years Condition workshop tested, good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 Piece Instruction Manual Warranty: 6 months from the date of delivery List factory price from stock €6,900.00 + VAT Pr ...

BRABENDER Moisture Analyzer Semi-Automatic HA includes setting thermometer and 10 sample dishes overhauled and adjusted by our laboratory specialist partner Control thermometer and weight set new Sekutest DGUV V3 newly calibrated

Shaft test device, concentricity tester PAGUS Span: max 460 mm Center height: 72 mm with quick-release device ! used ! Dimensions: 700 x 390 x 255 mm

length: . mm height: . mm volt: U2 104 V ampere: I2 60 A volt: U1 400 V volt: U0 320 V ampere: I1 18-26 A Manufacturer number.32310819 EC/EN 60974-1 See type plate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 500 machines in stockMore than 8,500 m² of storage space, crane capacity 70 tMore than 10,000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UNOTECH package press from 2018 with approx. 13 - 14,000 Bh. and a sufficient package of wearing parts. the baling press is designed for baling of metal cans and metal blanks Find more here - .ucymachines/

Sourdough mixer Kitzinger Sourmat 300 - Stainless steel sourdough stirrer - Kitzinger - Type: Sourmat 300 - 400 volts - with drain tap - on castors - Shell inner diameter: 72.5cm - Shell height inside: 64.5cm

Illumina MISeq, good condition New-generation sequencer / for DNA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Sourdough - Fast - Fermenter Model: Hema BRSSF 100 with external LED control approx. 20 - 100 kg total rye flour for approx. 60 kg sourdough with timer Stainless steel version, mobile Agitator removable at the bottom Connection 400V, 1.5 kW, 16A-CEE plug Dimensions: 640 x 700 x 1250 mm Used machine cleaned 3 months warranty + spare parts service Option: Maintenance contract Service Package Instruction & Commissioning You will find a large selection of bakery equipment with us!

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, The turbine has approximately 7,500 operating hours. Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 ...

10X Genomics GCG-SR-1 The Chromium Controller is in very good condition Find more here - .ucymachines/ Contact us at - sales@ucymachines

Steam Turbine 1 and major components Plant part Manufacturer Year of construction techn. data turbine VEB EKM 1970 generator VEB EKM; VEB Bergmann Borsig 1970 31250 kVA x 6,3 kV condenser VEB EKM 1970 Bearing oil plant, pumps, VEB Apparatebau Leisnig-Tragnitz; Filter Cooler VEM, Siemens, VEB EKM and KSB 1969 Steam jet cleaner Wilhelm Wigand ca. 1970 Condensate pumps VEB EKM ca. 1970 Find more here - .ucymachines/ Contact us at - sales@ucymachines

2012 Horiba Fluorolog FL3 - 22 Modular spectral fluorometer, very good condition, barely used. Was last serviced in 2022, but is currently in storage Features: - FL3-22 inklusiv Fluoressence Software - FL1048-FUP Peltier cooling chamber - FL1001 Front Face Option - ZK36000120SL Fixed probe holder for front-face measurements with fine adjustment - FL1044 Automatic polarization unit - FL1011 Automatic quadruple cuvette holder - FL1014 Control unit for aut. cell changer - AC200- A25 Temperature control unit - Transmission and absorption unit - DM303 Amplifier - COM-FL Computer control system Find more here - .ucymachines/ Contact us at - sales@ucymachines

Anton Paar ProveTec GmbH Penetrometer Type: PNR 12 Year of construction: 2022 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

Agilent Technologies Bravo G5522A NGS Workstation 1.1 NGS Benchtop Integrated WorkStation -Integration of plate management and liquid handling devices into a benchtop automation system. - VWorks Benchtop License: Included - VWorks Simulation License: Included Robot Disable Hub: included 1.2 Bravo Liquid Handler integrated to BenchCel with - 5 Standard Pads 2 CPAC Ultraflat heated/cooled Pad 1 Bravo Orbital Shaker - 1 Bravo Thermal Pad · Magnetic Bead Pad - PCR Plate Support 96 Well · CPAC PCR Plate Insert -Deck risers for Bravo -Thermocube Chiller 400W for Bravo Thermal Pad -Controller for CPAC Pad 1.3 Bravo Gripper Upgrade 1.4 96LT Disposable Tip Head 1.5 BenchCel 4Racks Microplate Handler - With 4 Front Loading Racks - BenchCel Risers 1.6 Labware MiniHub - Integrated with BenchCel Find more here - .ucymachines/ Contact us at - sales@ucymachines

Aerosol Jet Printer Model - AJ300CE The Optomec AJ300CE Aerosol Jet Printer, introduced around 2011, is an additive manufacturing system designed for high-resolution, non-contact printing of electronic and biological materials onto various substrates, including non-planar surfaces. It utilizes Aerosol Jet technology to deposit fine-feature patterns with feature sizes as small as 10 micrometers. Key Features: - High Precision Printing: Capable of producing feature sizes down to 10 µm, enabling the creation of intricate patterns necessary for advanced electronic components. - Versatile Material Compatibility: Supports a wide range of materials, including conductive, resistive, and dielectric inks, with viscosities ranging from 1 to 1000 cP. - Non-Contact, Conformal Printing: The non-contact deposition process allows for printing on complex, three-dimensional surfaces without damagin ...

Digestate Dryer - RHS Rhino Agitator Dryer - Manufacturer: RHS - Model: MCT10 - Year of Manufacture: 2018 - Power Output: 33 kW - Operating Voltage: 3-phase, 400V, 50 Hz - Control Voltage: 24V DC - Power Factor: ~0.8 (capacitive) - Frequency: 50Hz - Fuse: minimum 100A - Equipped with: Underbody cleaning on one unit, control cabinets, stainless steel feed screws, heat exchanger, heating water pump, supply air fans - Quantity: 3 units - Operating hours: approx. 7000 hours - Variants: One machine equipped with underbody cleaning Functionality The RHS Rhino Dryer is engineered for the drying and hygienization of fermentation residues (digestate) and slurry. It supports efficient moisture reduction, stabilizing the material and reducing odor. The feed system utilizes DN 150 pipelines with an eccentric screw pump, and the dried material is discharged through stainless steel feed screws for  ...

Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KUKA Year of Manufacture: 2006 Model: KR 100 comp Type of Machine : Industrial Robot Find more here - .ucymachines/ Contact us at - sales@ucymachines