measuring equipment used for sale

Description: consisting of: outside micrometers internal measuring equipment Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 100 mm, weight approx.: 30 kg

optical angel measuring unit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workpiece diameter: 0 mm Workpiece length: 0 mm Technical data Table size: Length: 800 mm Width: 550 mm Height between table and tracer: 700 mm Machine´s weight about: 1050 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 2400 mm Various accessories: Tool cabinet Electrical measuring instrum. Printer

Workpiece diameter: 0 mm Workpiece length: 0 mm

Description: 0   Technical data Number of axis total: 2 Max. forwarding speed: 0.2 - 4 mm/s Measuring ways: longitudinal: 200 mm Vertical: 620 mm Table size: Length: 700 mm Width: 550 mm Height between table and tracer: 110 mm Voltage 50 Hz 3x: 220 Volt Dimensions: Length: 1700 mm Width: 900 mm Height: 1850 mm Various accessories: PC system Calibration accessories Cross table: Length: 200 mm Width: 200 mm Set of tracers Measuring table (Marble)

Workpiece diameter: 0 mm Workpiece length: 0 mm

Workpiece diameter: 0 mm Workpiece length: 0 mm Technical data Measuring ways: longitudinal: 800 mm transversal: 600 mm Vertical: 600 mm Resolution: 0.005 mm Table size: Length: 1000 mm Width: 750 mm Table load max.: 600 kg Machine´s weight about: 4000 kg Overall dimensions machine: Length: 2320 mm Width: 1570 mm Height: 3255 mm

Workpiece diameter: 0 mm Workpiece length: 0 mm Technical data Number of axis total: 3 Travels: X axis: 460 mm Y axis: 510 mm Z axis: 420 mm Table size: Length: 755 mm Width: 555 mm Table load max.: 227 kg Machine´s weight about: 300 kg Dimensions: Length: 1060 mm Width: 850 mm Height: 2350 mm Various accessories: Set of tracers

Workpiece diameter: 0 mm Workpiece length: 0 mm Technical data Table size: Diameter: 30 mm Height between table and tracer: 900 mm Dimensions: Length: 850 mm Width: 700 mm Height: 2200 mm Various accessories: PC system

x-travel: , mm Ironing measuring screw, measurement range: 225-250 mm Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: With 9 drawers  , Contents H-angle, , caliper, , Protractor, , Micrometer screws, , SUBITO holder, , Gauge block boxes Approx. Onsite Dimension. (l x w x h): 745 x 715 x 1,050 mm, weight approx.: 150 kg

Description: Precision universal measuring table with stand 'small', table = 100 x 150 mm, measuring height/tripod approx. 245 mm, strong cast base, rectangular measuring table. Measuring table surface ground with integrated dust grooves. Center column with adjusting nut. Horizontally adjustable cross arm for dial indicators or precision pointers. Approx. Onsite Dimension. (l x w x h): 230 x 150 x 320 mm, weight approx.: 10 kg

Description: Höfler stylus arm with stylus in holder Ø ball: 1.0 mm, - Ø shaft: 6 mm, - length of shaft: 20.6 mm, - total height: 124 mm, - length of extension: 84 mm, - measuring radius: 72.5 mm, unused, scope of delivery according to photos Approx. Onsite Dimension. (l x w x h): 235 x 175 x 45 mm, weight approx.: 1 kg

Description: Precision universal measuring table with stand 'large', table = 180 x 215 mm, measuring height/tripod approx. 465 mm, strong cast base, rectangular measuring table. Measuring table surface ground with integrated dust grooves. Center column with adjusting nut. Horizontally adjustable cross arm for dial indicators or precision pointers. Approx. Onsite Dimension. (l x w x h): 250 x 250 x 550 mm, weight approx.: 15 kg

Description: Parallel gauge block '100' from Kolb & Baumann (KOBA), product information: Dimensions 100x 30 x 9 mm, including transport box, quantity = 1 piece Approx. Onsite Dimension. (l x w x h): 140 x 65 x 45 mm, weight approx.: 1 kg

Description: Gauge treasure 5413-2011 Type: 5413-2011 – RS 232 C Torque tester - Torque Measuring System unit Approx. Onsite Dimension. (l x w x h): 450 x 250 x 150 mm, weight approx.: 10 kg

Description: Consisting of a digital caliper, 3 magnetic stands, a digital outside micrometer, 2 3-point inside micrometers and 2 reference rings Approx. Onsite Dimension. (l x w x h): 1,200 x 300 x 400 mm, weight approx.: 20 kg

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Measuring tables 3 pieces, each with dial gauge Micrometer screws Internal micrometer screws 7 pieces DIATEST bore measuring inserts Application angle Depth caliper Approx. Onsite Dimension. (l x w x h): 400 x 300 x 500 mm, weight approx.: 30 kg

Description: Beatometer 2 pieces , Digital and analog dial gauges RIDGID SeeSnake micro inspection camera endoscope camera Laparoscopic telescope Approx. Onsite Dimension. (l x w x h): 300 x 300 x 400 mm, weight approx.: 30 kg

Description: Consisting of a digital caliper, a micrometer, two dial gauges, a digital dial gauge and an analog caliper Different manufacturers Approx. Onsite Dimension. (l x w x h): 500 x 450 x 60 mm, weight approx.: 7 kg

: 6 Messuhren : nur : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Grinding wheels, dial gauges, 1 compass Approx. Onsite Dimension. (l x w x h): 800 x 300 x 150 mm, weight approx.: 7 kg

Description: It is a 3D coordinate measuring system from the XM series from Keyence consisting of: o Measuring head XM –T1000 (two measuring probes) o XM-1500 measuring system o Adhesive plate for XM series o AC power cable o Mouse and keyboard Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 60 kg

Description: consisting of swith plug gauges, taps and snap gauges Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,900 mm, weight approx.: 200 kg

Description: consisting of one stock of micrometers, dial gauges and internal measuring devices Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,900 mm, weight approx.: 200 kg

SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label

3-D coordinate measuring machine ZEISS NUMEREX Granite measuring plate, granite measuring plate, measuring table Model No. 3648-18, Serial. No. X-1019, year of construction approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W 1525 x 1435 mm Usable area 1525 x 1100 mm Measuring plate thickness 305 mm Passage width in the portal 1100 mm Probe holder 9.5 mm Compressed air connection 6 bar Mains connection 230 Volt, 50 Hz. - Granite plate with steel inserts with internal thread - Axis adjustment with pneumatic sliding guide for X, Y and Z-axis - Plate on base frame with 5 pieces of adjustable feet, 3 pieces support plate for the adjustable feet - Computer and software missing (not available and not included) Space requirement of the measuring machine L x W x H 1600 x 1850 x 2200 mm Weight of the machine approx. 2.8 ton. Plate damage ...

welding table, straightening table, straightening flap, work table, clamping table measuring plate with measuring stand, measuring table PAGUS working surface: 300 x 270 mm working height: 50 mm tripod height: 275 mm with measuring stand Ø 12 mm ! Dimensions: 300 x 270 x 330 mm

Description: Measuring plate, dimensions 300 x 300 x 50 mm Height measuring device, manufacturer SYLVAK, type Z_CAL 300, measuring range 0 -300 mm Scoring prism 2 pieces weight approx.: 90 kg, Approx. Onsite Dimension. (l x w x h): 500 x 500 x 600 mm

Te Koop: Manifpld Scanio flow equipment. Mixproof valve. Type SN, 1.5 duims en 2 aansluitingen 38 12A.

Te Koop: Manifold Scanio flow equipment. Mixproof valve. Type: 2.5 duims en 2 aansluitingen.

Universal Automatic tablet testing system - Measuring equipment for laboratories - Tool for tablets Allows to test : Hardness Diameter Thickness Weight Accuracy Scale Sartorius WZ64S Range: 10 to 50 g Unit: mg / 0.5 mg / 0.1 mg adjustable Thickness Drive: stepper motor. Measuring principle: Linear potentiometer. Unit of Measure: mm or inch. Tolerance; +/- to.1 mm Hardness Drive: stepper motor. Measurement: Load measuring cell (lmz) Measuring principle: Torque gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of Measure: mm or inch. Range: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0,1 mm Voltage: 100 / 240 V, 50Hz / 60 Hz The UTS is a universal and fully automated test system developed for use in industry. This tool is the approved model of a series of test systems that have been tested for man ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: Number: about 30 passenger coaches technical data Passenger coaches 1st year of construction: 1977 to 1981 2. Weight: 33 t 3. Seats: 72, 2nd class 4. Longitudinal racks 5. Length over buffer: 23700 mm , 6. Side length 23400 mm 7. Rotary pin spacing: 17600 mm , 8. Rotating salmon distance: 2700 mm 9. Total axis distance: 20300 mm 10. Wheelset type: YRP and YRF All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, et ...

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Machinery and equipment for the production of cement, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own e ...

Machinery and equipment for the production of concrete blocks, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buye ...

Ladies and gentlemen, we offer: Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own ex ...

Ladies and gentlemen, we offer: Machinery and equipment for the production of roof tiles, Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and load ...

New. Designed for bed slats stress tests. Power consumption: 230 V The clamping force adjustable from 2 to 10 bar (till 200 kg). Inspection speeds of ~ 40 pcs. / Min. The adjustable length of the product. Simple service. Lamelle test labeled. Marking the label may change. Manufacturer Ltd. MS Import, Lithuania.

REWA 470 / 27 Product no.: RE-HU-2015-0801-1 Equipment: refurbished dewatering equipment Type: Chamber filter press 470/27 with high pressure piston diaphragm Abel Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 27 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 10.1 m ² Presses contents: approx. 135 dm3 PCB package length: 1600 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Pumps: Abel piston diaphragm high pressure pump Accessories: depending on the type and customer Extra services: On this complex guarantee months between 6-12. Condition: The system is in good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility or to buy? Contact  ...

Heat exchanger for cogeneration block cogeneration with 250 kVA 2 x available

ICONOS R100 Polydoros SX 65/80 Opti 150/40/80 HC-100 VIDEOMED DI C. last major quality check: March 2014

Attachment: Chamber filter press, laboratory press Usage area: Chamber filter press, pilot plant Design: page Holm led Type: XMS150-15 U Filter plate format: 150 x 150 mm Number of plates: 4 + 1/2 head and end plate Filter plates: PP Thickness: 15 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 0.2 m ² Presses contents: approx. dm3 PCB package length: mm Filter pressure: 15 PSI Plate transport: manually Pump technology: included - optional Type: centrifugal pump Type: CHL2-20 Buying or renting: Visit the facilities in consultation with us to work. Condition: demonstration plant, near Mint Photo: a construction-like setting Weight: approx. 70 kg length 70 cm: Width: approx 40 cm Height: With stand + pump approx. 85cm

We have for sale a very good conditioned A1 with very low working hours. Tetra Pak® A1 for Tetra Classic® Aseptic (TCA) is a filling machine for aseptic packaging of liquid food. Tetra Pak® A1 for TCA puts aseptic packaging technology at your disposal, enabling you to produce the Tetra Classic® Aseptic package. Tetra Pak® A1 For TCA 150S Used Aseptic Filling Machine Make: Tetra Pak® Model: TCA A1 150 ml Slimline Area of use: juice, milk, water, tea, wine, other liquids Working hours: 2218 Year of manufacture: 2004 Capacity: approx. 10000 p/h Condition: very used good condition Tetra Straw Applicator 1 Make: Tetra Pak® Year of manufacture: 2005 Working hours: 2110 Tetra Pak® 10 m Conveyors

Demonstration device. The system is designed to work in a closed circuit. It has two separate chambers / phases, the first chemical solution and the second with soapy water. The device is designed to minimize the effort of mixing of substances. A micro-processor controlled system allows easy operation of the unit with a user interface. Inside / work Maß 2000 B x 1500 T x 1500 H Outer dimensions 2800 B x 1600 T x 1800 H Operated electrically Voltage 380 V Power 9 kW Frequency 50-60 Hz Water pressure 60 / 160-200 bar Chemical pressure up to 15 bar Phase I chemistry circuit closed heated chemical tank Phase II water / tap water Capacity 7-10L/min Heating capacity 30 80 ° C Tank capacity 200 L Control manual / automatic Remaining warranty up to 12 months Continuously exhibition equipment on sale

Demonstration device. Powder coating plant mini - for beginners The spark / ROMER® powder coating plant mini - consists of: SLS-9 small powder furnace (Indoor: 1200x1400x1200mm - without transport system) Powder booth KPZ-2 p Powder hand plant AP 400 Shipping costs will be calculated individually. (also, pickup) Payment conditions: 30% deposit and the balance of 70% with notification of readiness for dispatch.