mb trac used for sale

An automatic Lorch welding machine including vacuum pump and traverse is available. Current: 230V, power: 100W, min. material thickness: 5mm, vertical/horizontal pulling force: 150N/350N, vertical/horizontal speed: 1100mm/min/1200mm/min, machine dimensions X/Y/Z: approx. 450mm/670mm/370mm, weight: approx. 25kg. Documentation available. On-site inspection is possible.

Year of construction 1988, with Marrel Grue 1150 crane: Year of construction 1995, 2-fold hydraulic extension to max. 7 m, 3650 kg maximum lifting capacity,

Hemco hydraulic tracing lathe Hopper feed very good condition...$7,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Technical data: - Bending capacity - steel pipe of 20 - 60 x 4 mm - - stainless steel pipe of 20 - 50 x 3 mm - max. resistance moment 6.2 cm - max bending angle 180° - max radius 125 mm - Bending speed 8 sec - Drive 400 V / 3 kW - Space requirement approx. L 2400 x H 1600 x D 1000 mm - Weight approx. 1400 kg - with: - Bending angle control via potentiometer with digital display - 6-fold bending angle preselection - Indoor + external pipe deburrer - Bending tools Rx2.5D x 38 ; • 50 , 65 ;

Seidenader T&T Single Unit Track & Trace System for marking and verification of folding boxes/cartons for serialisation and aggregation (Track&Trace), the product codes and variable data (serial no., batch no., expiry date, datamatrix codes, French codes, etc.) printed on the folding cartons are verified via a camera for accuracy and quality, including Wolke m600 advanced Ink jet printer using HP ink cartridges (height of printing max. 12.7 mm), 1 (one) printing station with 2 (two) printing heads located on the back side, infeed conveyor with a length of approx. 300 mm and a width of approx. 185 mm, transfer unit with lower belt and adjustable upper belt for precise and reliable product transfer, carton length (in the direction of travel) max. 220 mm, carton width max. 200 mm, direction of travel from left to right, handheld scanner, electrics 230V + N + PE /50 Hz/1,0 kW, machine floor  ...

Reducer Concentric AGRU/TRACEABILITY 250/160 SDR 1

Reducer Concentric AGRU/TRACEABILITY 90/75 SDR17

For sale is a used high-temperature analyzer, from the manufacturer Elementar Analysensysteme GmbH. The liquiTOC trace is functional and ready for use. Year of Make: 2007 Mains voltage: 120-230 V AC +-10%, 50/60 Hz Connected load: approx. 1.9 kVA Operating Modes: TC, TIC, TOC, NPOC, POC Calibration: linear Sample volume: 0.05-4ml, depending on the concentration range Analysis duration: 6-22 min, depending on operating mode Sample storage type: PS 61E Weight: approx. 50kg The instruction manual is provided. Price excludes VAT, freely loaded from the Hesse-Germany location. Shipping to Arrangement and assumption of costs as well as delivery possible throughout Germany. Changes / errors in the technical data as well as prior sale reserved.

Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import

Power supply unit, converter, power supply, switching power supply -Type: EXI-05030 -Input: 170 - 264 VAC/2.5 A -Output: 5 VDC/30 A -Dimensions: 195/95/H60 mm -Weight: 0.9 kg

Power supply unit, DIN rail -Type: TSP 180-124 -Weight: 0.7 kg

Power supply unit, DIN rail -Type: TSP 180-148 -Weight: 0.7 kg

Power supply unit, DIN rail -Type: TSP 360-124 -Weight: 1.4 kg

Power supply unit, DIN rail -Type: TCL024-112 -Weight: 0.3 kg

For sale I offer a Tractel grab hoist T516D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request Dates: - The T 516 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads - Load capacity 1600kg - Length, height, depth without hook 523x315x127mm - Rope diameter 11.5mm - Weight 13.5kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T516 # T500 series # 1600kg # 1.6to

For sale I offer a Tractel grab hoist T532D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request. Dates: - The T 532 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads. - Load capacity 3200kg - Length, height, depth without hook 620x355x130mm - Rope diameter 16.3mm - Weight 24kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope. # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T532 # T500 series # 3200kg # 3,2to

Manufacturer: Tracto-Technik Model: Turbotronik TN 30 MR Year of Manufacture: 2008 Capacity: Max Ø30mm Type of Machine: Pipe Bending Machine Find more here - / Contact us at -

Manufacturer: Thermacut Model: EX-TRACK CNC-PA OX Year of Manufacture: 2021 Type of Machine: Plasma cutter Max Travel Speed: 3000 mm/min Max Cutting Length: 3050 mm Max Cutting Width: 1525 mm Voltage: 110V/230V Current: 1A Find more here - / Contact us at -

This machine integrates track building, peeling, and brushing functions - Hydraulic lifter - Electric Control Panel – Operates on 380V / 220V - Hand brusher (Yellow) Find more here - / Contact us at -

Tube bending machine - mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 KSerien. No. 70173 Year of construction 2004Bending capacity (steel) max. 76.1 x 3.0 mmBending capacity (stainless steel) max. 76.1 x 1.65 mmBending tool max. 70 x 2 mm (for stainless steel)Pipe slide length 4572 mm (4300mm)Bending radius max. 150 mmBending direction clockwise (right)Bending angle max. 190Bending head speed at 90 8 sec. Hydraulic operating pressure 200 barEngine power 3 KWnet connection 400 Volt, 50 Hz, 15

Trackscan Sharp 49

This self-priming 12-inch emergency pump is designed for rapid deployment in high or low water emergencies. Unique to this B300 is the tractor drive (PTO)., -Max capacity 1500 m3/h. , -Max delivery height 25 mwk., -Max dirt passage 70 mm., , Comes with 2 trailers (slow traffic / no license plate) filled with piping, for suction and discharge of the pump, , AHW1 ), 2x suction/discharge hose 12, length 4 meters, 1x suction basket 12, 1x 90° bend 12, 1x 45° bend 12, 9x drain pipe ‘lightweight’ 12, length 4 meters, , AHW 2 ), 2x suction/pressure hose 12, length 4 meters, 1x suction basket 12, 1x 90° elbow 12, 1x 45° elbow 12, 9x drain pipe ‘lightweight’ 12, length 4 meters, , Can be transported in one go, pump can be connected to the trailers, trailers can be connected together , , Very good condition!, , Throughput capacity: 1500 m3/h, Max dirt passage: 70 mm, Max. head: 25 MWK, ...

- Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  - Hydraulicbendingdriveoperatedbyhandlevervalve - Hydraulic bending drive, operated by hand lever valve - Follower-type pressure die (sliding guide) - Hydraulic mandrel retraction - Pipe circular saw with coolant lubrication and automatic feed - Pipe deburring unit for internal and external deburring - Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  - Machine mobile and flexible to use

tube diameter: 4 - 28 mm : 3000 mm bending radius max.: 90 ° connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 3,7 x 1,2 x 1,5 m Electro-hydraulic mandrel tube bending machine with - Bending mandrels for 18mm tube - Tools for: 8mm, 10mm, 12mm, and 18mm - PC interface - Laptop - Documentation See images for further accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...

A semi-automatic NC tube bending machine Tracto-Technik is available. Tube diameter: 48mm, max. tube length: 3000mm, max. material thickness: 4mm, max. bending angle: 180°, max. bending radius: 125mm, bending accuracy: +/-0.2°, bending speed: 20°/s. Machine dimensions X/Y/Z: approx. 3900mm/800mm/1250mm, weight: approx. 700kg, control system: Siemens Simatic. Documentation available. On-site inspection is possible.

This SCANTECH Trackscan Sharp49 was manufactured in 2023. It is a laser measurement machine designed for precision and efficiency in various industrial applications. Consider the opportunity to buy this SCANTECH Trackscan Sharp49 laser measurement machine. Contact us for more information about this machine.

Manufacturer: SEBA Model: Lite Track 70-40 New Evolution Year of Manufacture: 2022 Operating hours : 45 h Technical Specifications - Operating weight: 12,000 kg - Transport length: 5,300 mm - Working length: 8,630 mm - Width: 2,420 mm - Height: 2,750 mm - Engine: Yanmar diesel, 53.7 kW / 850-2,000 rpm - Travel speed: 0.7 - 1.3 km/h - Maximum gradient: 30% - Conveyor belt speed: 1.85 m/sec - Hopper capacity: 2.5 cubic metres - Output capacity: 10 - 45 cubic metres per hour - Jaw opening: 700 x 400 mm - Hydraulic jaw gap adjustment: 15 - 100 mm Standard Equipment and Features - Vibrating feeder with pre-screening grizzly - Reversible discharge conveyor for pre-screened material - Remote control for all machine movements, including 2 battery packs - Level sensor at crusher inlet - Magnetic separation belt - Anti-dust system - Lighting for night operation - Video camera monitoring at  ...

tube diameter: 6 - 42 mm wall strength: 3 mm bending radius min.: 180 mm bending radius max.: 5 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m Equipment: Saw unit Notching unit Deburring unit for internal and external edges Flaring unit / flaring function (necking / expanding) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working range pipe Ø 6 to 42 mm - Bending, deburring, pre-assembly, sawing - Pipe extension length approx. 1,500 mm - Electro-hydraulic drive 1.5 kW - Weight approx. 700 kg - Incl. extensive tools - See photos

Power supply unit, DIN rail -360 W, 24 V/1 5 A -Power supply output type: Fixed/Adjustable -AC input voltage: 85 V to 132 V, 187 V to 264 V. -Number of output channels: 1 -Nominal output voltage: 24 V -Output current max.: 15 A -Power output max.: 360 W -SVHC: No SVHC (19-Dec-2012) -Areas of application: Industrial -External width: 80 mm -Width: 80 mm -Input voltage change: 0.5 % -Frequency input-: 63 Hz -Frequency supply max.: 63 Hz -Power supply unit -Frequency supply min.: 47 Hz -Weight: 1.1 kg -Height: 125 mm -Load change: 0.5 % -Length: 125 mm -Length outside-: 125 mm -Mounting: DIN rail -Rated power: 360 W -Voltage output: 24 V -Voltage output max.: 28 V -Voltage output min.: 24 V -Current output: 15 A -Power supply type: switch mode -Depth outside: 125 mm -Supply voltage: 264 V -Supply voltage max.: 264 V -Supply voltage min.: 85 V

Gas Chromatograph THERMO SCIENTIFIC TRACE GC ULTRA FID + 2 autosampler AI1310 / AS3000 Composition: GC Trace Ultra Chromatograph - Model: K09301734B00000 AI1310 Injection Turret / Autosampler Injection turret / Autosampler AS3000 With many consumables With 4 Waters bus SAT/IN modules With cables Without software Without a computer Warning, equipment not tested Buy as is

Technical specifications, · Crusher: Jaw crusher with an inlet opening of approx. 1,100 × 750 mm (in some variants 1,100 × 800 mm), · Performance: Depending on material and settings, the plant achieves a capacity of up to 400 t/h, · Weight: The transport weight is 44.2 t, · Dimensions: Transport length approx. 14.24 m, width approx. 3.00 m, height approx. 3.35 m, · Antrieb: CAT / 179 kW diesel-hydraulic system with load sensing to save fuel, · Year of construction: 1996, · Operating hours: 12,000 h, · Year of construction: 1996, · Operating hours: 12.000 h

Package Overview Manufacturer: Tracto Models: Grundodrill 18ACS and Grundodrill 15XPT T5 TD73 Year of Manufacture: 2022 Unit 1 — Grundodrill 18ACS - Year of Manufacture: 2022 - Operating Hours: 1,484 - Engine: 123 kW Stage 5 drive motor for travel and drilling - Pulling and Pushing Force: 180 kN - Torque: 7,500 Nm - Undercarriage: Rubber-padded steel track - Cab: Full cab, swivelling, with heating, radio, and air conditioning - Drilling Data: Onboard documentation to DVGW GW 321 - Drilling Mode: Fully automatic - Remote Control: Radio remote control for travel operation - Bentonite Pump: 320 l/min onboard HD pump - Telemetry: Drill data transmission - Anchoring System: With bentonite collection tray - Rod Changing System: Hydraulic clamping and release unit Unit 1 — Measuring Technology - DigiTrak Falcon F5+ System with AF8 Display, DigiTrak Sender FT2, V2 15 inch (F2/F5), Lit ...

Bag-in-box filling - also with 6-digit row filler available nominal power l/h 750 (at 10l bags) l/h Electrical connection 230V 50Hz (single-phase) Electrical fuse 16 A Laenge 1030 mm Width 7 40 mm Height 1065 mm Weight 85 kg material 1.4301 / AISI 304 Filling accuracy of 0.5% compressed air connection 6 bar connection for juice supply 21.3 Juice storage capacity 58 l Supplied incl. cleaning adapter ; New machine - best condition

Mobile Auger with hinged hopper. Ideal for filling of silo trucks. The appliance without problems in the open air can be stored by the hinged hopper. The promotion or a change of location is quickly done with the hitch. (Street legal on request possible)Displacement approx. 60 m m³/h, screw diameter 350 mm, length 8 m, spout height approx. 5 m, drive motor 4KW, capacity of the hopper 4 m³. Please request special designs and snails with different services to meet your needs! We almost always have a solution!

• continuous feeder • Counter IZVA 342 T 1st parallel folding unit: • working width max. 67 cm • 4 buckle plates • spiral folding rollers • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife • slitter shaft after cross-fold • spiral folding rollers 2 nd cross fold unit: • cross fold knife left • spiral fold rollers standard accessories: • scoring, perforating and cutting devices for standard Still in operation: No Available: sofort

Mobile double drum dryer with many setting possibilities. Can be used in a 20 ' container be fitted and used as mobile plant. Wolf heating unit WLE-S can be converted at any time also to gas operation 140KW, oil burner Elko Kloeckner, type EK 02. Fan unit with 12,000 m³/h, 5,5KW, 955 1/min drying temperature up to 220 ° C depending on the drying goods. With heavy dust separator and air filter. Air to air heat exchanger for indirect heating - no exhaust in the drying air!

M.No: 4090 Width: 70 cm Thickness: about 1 cm

1 piece NAUTA mixer MBX 20s -Volume ca. 1.600 liters - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of standard steel Virgin -Mixing screw steel Virgin -Spout pneumatically driven new product -Drive motors 4kW & 0.37 of kW Virgin

1 piece NAUTA mixer MBX 20-R -Volume ca. 1.600 liters - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 4kW & 0.37 of kW Virgin

1 piece NAUTA mixer MBX 40-R -Volume approx. 3.200 litre - bulk density CA. 0, 7 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin

1 piece NAUTA mixer MBX 50-R -Volume approx. 4.000 litre - bulk density CA. 0, 6 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin

Gas motor MTU MDE ME3042 MB3042 swap motor 350/370 kW Exchange machine We offer a replacement engine from MTU (MDE) both natural gas and biogas. Machine is prepared according to manufacturer guidelines. 1 year warranty - a training installation, as well as motor and CHP optional services. Please contact us for an offer. We can prepare even more exchange engines (ME3066, MB3066) as well as change- cylinder heads, intercoolers, turbochargers and other components and spare parts for MTU MDE CHP in stock. We like to submit an offer.