master 35 used for sale

White Renault Master with closed cargo box and hydraulic tail lift from Dhollandia. The cargo space has wooden side walls and a wooden floor. The tailgate has an aluminum platform. The cab seats three people and is equipped with a manual gearbox, radio and heating/ventilation system. The vehicle is on steel rims. The odometer reading is 201,543 km. The vehicle shows signs of wear, including dirt and wear on the interior, minor damage and discoloration/contamination to the cargo body. The operation of the engine, gearbox and tailgate has not been tested and must be checked by the prospective buyer. Auction-ID: A3-46160-1

The Drester GP24 Le Mans is a fully automated wheel washing machine, designed for high-volume tire workshops, garages and automotive service centers. It uses an environmentally friendly cleaning process based on a mixture of water and DoublePower plastic granulate, sprayed via a mobile rinse tube. This system allows efficient, gentle and uniform cleaning of aluminium rims, sensitive rims and SUV wheels, while preserving the TPMS sensors. The cycle takes place without human intervention: the operator loads the wheel onto the industrial trolley (Rollwagen), positions it in the machine, starts the cycle, and the GP24 automatically manages the entire process. Key points: • 100% automated process • Fast and repeatable cleaning • Dynamic technology for optimised aggregate action • Closed water circuit (300 L) with low consumption • Ergonomic solution for the operator • Compati ...

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining range: X 2500 mm, Y 1360 mm, Z 100 mm (passage 120 mm) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 pos. ISO30, manual tilting X/Y index head Table: belt with vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: CE Auction-ID: A1-50215-34

CNC mortising milling machine MASTERWOOD OMB1 CN3KF • Year : 2005 • Working dimensions: 5600 × 300 mm • Numerical control: SINCRO on Windows PC • Router head: 4 kW • Vertical bar presser for top routing • Digitally controlled retractable backgauges • Table with motorized belt and side stops• Motorized vertical loader and side unloader• Automatic horizontal press (20–220 mm) • Vertical press (18–160 mm) – working up to 33 mm from the milling pin • Power supply : 400 V / 13.4 A / 50 Hz • Weight : 2000 kg  Auction-ID: A1-50215-36

Machining Strokes: X-Axis: 3,400 mm | Y-Axis: 600 mm | Z-Axis: 150 mm Tool System: 8-Position Tool Holder Holding parts: Equipped with a vacuum pump Auction-ID: A1-50215-44

Machine: MASTERWOOD TEKNOMAT 2800 Cutting Machine Year: 2004 Machining capacity: X 2800 mm, Y 780 mm, Z 770 mm Positions: - Electrospindle milling unit HF 3.3 kW, 18,000 rpm, tilt -7° to +90° (x2) - HF 5.5 kW electrospindle milling unit, 18,000 rpm, horizontal fixed - HF 5.5 kW electrospindle milling unit, 24,000 rpm, vertical, ISO30 taper Equipment: panel support, 3 pneumatic front pressers + 2 stops, separate electrical cabinet Software: Masterwood MW313 with ANUBA programs (hinges, hinges, locks, strikers, special cutters) Axis speeds: U 60 m/min, V 20 m/min, W 20 m/min Safety: infrared barrier, CE protection Suction: Ø200 mm, flow rate 3000 m³/h Consumption: 32 A Dimensions: 5430 x 4798 mm Weight: 3600 kg + 430 kg (electric cabinet) Auction-ID: A1-50215-42

Machine Type: TEK.2004F Serial Number: 99050024 Country of Origin: Italy Power: 10 kW Voltage: 380 V Frequency: 50 Hz Amperage: 19.9 A Maximum distance between the 2 external anuba plugs: 2,700 mm Maximum height with head positioned at 0°: 200 mm Maximum thickness with head positioned at 90°: 120 mm Drilling Engine: 1 HP Screwdriving motor: 1 HP X-axis speed: 40 m/min Y-axis speed: 7 m/min Z-axis speed: 7 m/min Overall dimensions: 3,550 x 2,623 x 2,200 mm Machine weight: 1,600 kg Weight of electrical panel: 145 kg Auction-ID: A1-50215-52

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining range: X 2500 mm, Y 1360 mm, Z 100 mm (passage 120 mm) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 pos. ISO30, manual tilting X/Y index head Table: belt-driven, vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: CE Auction-ID: A1-50215-41

KUHN Multi-Master 113 4-Scissor Hydraulic Reversible Plow – New and Unused Specifications: Brand: KUHN Manufacturer: KUHN-HUARD S.A.S. Series: Multi-Master 113 Model according to type plate: MM1133E/41102 Serial Number: KHUA1007V00G00562 Version: mounted hydraulic reversible plough Number of scissors: 4 Number of risters: 8, 4 per direction Working width per shear: 35, 40 or 45 cm Total working width: approx. 1,400, 1,600 or 1,800 mm Working width: mechanically adjustable Distance between plough bodies: approx. 1,020 mm Clear height under frame: approx. 750 mm Main frame: 120 × 120 mm Maximum permitted tractor power: approx. 88 kW / 120 hp Total length: approx. 4,300 mm Total width: approx. 2,000 mm Total height: approx. 1,600 mm Maximum working width: approx. 1,800 mm Weight according to type plate: 800 kg Features: 3-point tightening Hydraulic Rolling ...

Defects: Housing slightly damaged Power: 750W Auction-ID: A1-50225-59

Auction-ID: A1-50093-89

Features: Cole-Parmer Masterflex Console Drive Peristaltic Pump Model 77521-47 with Standard Pump Head, Model 7024-52 Auction-ID: A1-50093-43

Meat Master MM-26 / BI/52 Curing Machine For sale is a professional, mobile curing injector from the premium brand Inject Star, model MM-26 The machine from the Austrian quality manufacturer Pökelmaschinen Ges.m.b.H. Vienna (Inject Star) is the classic in butchers' shops, with direct marketers and in artisanal meat processing. It is ideal for precise and uniform injection of brine into boneless and boneless pieces of meat. Due to its more compact dimensions, the MM-26 series is perfect for small to medium-sized butchers, catering suppliers or direct marketers (e.g. farm shops). The curing machine is made entirely of robust stainless steel and is visually excellent, very clean for the year of manufacture (see detailed pictures). The mechanical needle system with springs and the electromechanical control are extremely robust and, unlike modern touchscreen controls, ar ...

Year: 2002 Manufacturer: Renault Type/Function: Hydraulic tipper truck Model: Master Tipper equipment: CIF BRETTA Tipper type: VT 306 I2 Equipment weight: 600 kg Indicated payload: 1,225 kg Year of manufacture of equipment: 02/2002 Year of assembly: 12/2002 Equipment: Electric in-cab tipper control, 3-seater cab Auction-ID: A1-50088-13

Manufacturer: Renault Type/Function: Utility van Model: Master Engine: Diesel dCi 90 Mileage: 346,710 km Curb weight: 1,850 kg Equipment: Rear hitch To be expected: Gearbox to be replaced, gearbox supplied Auction-ID: A1-50088-15

GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.

Extruder with vacuum vertical prepress LVP-35, gearbox overhauled in 2011, screw wings equipped with carbide. Press equipped with DC motor 60 kW (can be converted to 55 kW three-phase motor at an additional cost). Machine is functionally tested and comes with some spare parts.

Ladies and gentlemen, we have various transformers for sale services of 630KVA to 3500kva Voltage 10KV 15Kv 20KV 22kv, 30kv 33KV immediately available and nationwide available TEL. 01727265324

Trumpf cutting head 3.75 inch Trump ID: 911218 / 1261653 -used cutting head, technically and visually in very good condition suitable for Trumpf L3030/3050/3530/4030/4050/6030/6050

Tape welding machine for sawmills up to 35mm Manufacturer Ideal Type B1 220 Volt 6 Ampere Special price

Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 60° -Drawing: in the photos -Dimension: 25 x 165 mm -Length: 3562 mm (each 1 x 1818/800/387/190/122/85/60/55/45 mm) -Weight: 124 kg

Stick electrodes 3.25 x 350 -Manufacturer: Avesta -Type: 309L Ø 3.25 x 350 mm -Dimensions: 375/65/H65 mm -Weight: 4.3 kg

Stacking electrode 2.5 x 350 -Type: BASO G -Weight per package: 2.8 kg

Stick electrodes 2.2 x 350 -Elga: Cromarod 308L for V2A/V4A -Dimension: Ø 68 x 355 mm -Weight: 3 kg

Stack electrode 3.25 x 350 -Type: FOX FFB -Weight: 5.3 kg

Stack electrode 4.0 x 350 -Type: DUCTILEND 56 -Weight per package: 4.6 kg

Roller conveyor 2750/2180/1500-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guide Frequency converter for infinitely variable speed control Availability: 3 identical tracks - individually cu ...

Stick electrodes 4.0 x 350 -Type: KESTRA BLUE -Weight: 4.4 kg

Stack electrode 4.0 x 350 -Type: OK50.40 -Weight per package: 4.4 kg

Stick electrodes 3.2 x 350 -Type: Navalend 25 -Price: per package -Number: 2 packages available -Weight per package: 5.3 kg

Stick electrodes 4.0 x 350 -Type: KESTRA YELLOW -Weight: 5.1 kg

Stick electrodes 4.0 x 350 -Type: Phoenix 330.1 SH Purple R -Weight per package: 4.9 kg

Stick electrodes 3.2 x 350 -Type: Navalend 81 -Price: per package -Number: 2 packages available -Weight per package: 5 kg

Stick electrodes 4.0 x 350 -Type: SL 19 G -Weight per package: 4.9 kg

Stick electrodes 4.0 x 350 -Type: Overcord -Price: per package -Number: 5 packages available -Weight per package: 5 kg

Stack electrode 3.2 x 350 -Type: E 126 Kb -Weight per package: 4.8 kg

Stack electrode 3.25 x 350 -Type: FOX SPEM -Weight: 4.7 kg

Stick electrodes 4.0 x 350 -Type: Fincord S -Price: per package -Number: 6 packages available -Weight per package: 4.4 kg

Stick electrodes 3.2 x 350 -Type: Phoenix 120 K -Price: per package -Number: 4 packages available -Weight per package: 4.3 kg

Stack electrode 4.0 x 350 -Type: MT RC 3 -Weight per package: 4.5 kg

Stick electrodes 3.2 x 350 -Type: OK 63.31 -Price: per package -Number: 4 packages available -Weight per package: 1.8 kg

Stick electrodes 2.5 x 350 -Type: Phoenix Special D -Price: per package -Number: 10 packages available -Weight per package: 4.2 kg

Stick electrodes 4.0 x 350 -Type: Fincord -Price: per package -Number: 4 packages available -Weight per package: 4.3 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Span width: 80 - 350 mm -Load capacity: 5000 kg -Dimensions: 410/210/H400 mm -Weight: 15.5 kg

Stick electrodes 3.2 x 350 -Type: OK 63.31 -Weight: package 3.1 kg/79 pieces -Package: not full

Stick electrodes 3.25 x 350 -Type: Guarantee -Price: per package -Number: 5 packages available -Weight per package: 5.3 kg

Stick electrodes 2.5 x 350 -Type: CONARC 49 C -Price: per package -Number: 3 packages -Weight per package: 2.6 kg

Stick electrodes 4.0 x 350 -Type: Gricon 515 S -Price: per package -Number: 2 packages available -Weight per package: 5.3 kg

Stick electrodes 2.0 x 350 -Type: Special -Weight per package: 3.9 kg

Stack electrode 4.0 x 350 -Type: Cromocord Kb -Weight per package: 4.8 kg