man b used for sale

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â 20 Stk/pcs. Table/Panel 75 x 330 â 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â 6 Stk/pcs. Exterior ecke/Ou ...

DEAR'S SALE, HITACHI MAN 35MCE SPARE PARTS FULL COVER, LINER, PISTON, CONROD, 4CYL CAMSAFT, PIPES, FUELPUMP ANY PARTS Brgds Hakan KUSCU +905323642509 info@kscege

Te Koop: Manifold Tuchenhagen Mixproof valve. 83-85 mm en 2 aansluitingen.

Te Coop: Manifold Tuchenhagen Mixproof valve. 83-85 en 3 aansluitingen

Te Koop: Manifold Tuchenhagen Mixproof. 83-85 mm en 4 aansluitingen.

Te Koop: Manifold Ros Mixproof valve. aansluitingen 2 duims en 3, 2 pieces in een set gel branch.

Te Koop: Ros manifold Mixproof valve. 70 mm en aansluitingen, 4 3 pieces in een set gel branch.

Te Koop: Manifpld Scanio flow equipment. Mixproof valve. Type SN, 1.5 duims en 2 aansluitingen 38 12A.

Te Koop: Manifold Scanio flow equipment. Mixproof valve. Type: 2.5 duims en 2 aansluitingen.

Te Koop: Koltek manifold: Three-way valve met air motor. Type 50 DH-53 2 duims met 3 aansluitingen.

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

Exhaust manifold MAN D 2842

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

TO WHOM IT MAY CONCERN WE VE NEW UNUSED GENUINE SPARE PARTS OF MAN NR 34S AT OUR STOCK. NEW BEARING BUSH 1151768-0353 517003 1PCS NEW LOCATING BEARING 1151768-0580 517002 1PCS NEW NOOZLK E RING IMO 3318 129.88cm3 1PCS NEW BEARING ASSY 5891812 30021F 8PCS ALL PARTS EX STOCK LOACTED AT IZMIR TURKEY. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .

3 x 2.5 MW complete HFO power plant , MAN ( SSANGYONG ) 12V8/32H coupled with AVK generator 3.3KV / 50 Hz , Year : 1997-2000 Running hours : 34,000~44,700 hrs

Stx MAN 16V32/40 Crankshaft 4 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition standard sized Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine

Manifold GEA TUCHENHAGEN Mixproof-valves - Flushing - Balanced Valve top type: TM15N2B0M/66 DN25 NL = 8x DN25 KWIK = 3x DN 65 = 2x DN 80 = 27x Please contact u for more information

Manual spindle press, - Maximum filling height: approx. 90 cm, - Pressing area: 102 x 72 cm, Maximum fill level: approx. 90 cm, Pressure area: 102 x 72 cm

Forklift hydraulic/manual operations, max load wight 600 kg

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

description: Type: MAN 2876 LE302 gas engine for combined heat and power Power: 190kWe/1,500 rpm Standard scope of delivery â?¢ Rows â 6 cylinder four-stroke â gas engine based on MAN â D28 â?¢ Single cylinder heads, high-alloyed valve seat rings and valves, form-forged crankshaft with counterweights, wet cylinder sockets, piston cooling over oil spray nozzles â?¢ Compression ratio 11:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with multi-cyclone oil separator, engine ventilation must be integrated on the customer side â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2,412 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal & ...

with rod pipe

Qty. 1 Second-hand spinner block Mfc.: Mannesmann Demag Built: 1981 Modernised: 1991-1995 Basket dia.: 1524 mm – 60 Pulling speed: max. 1000 m/min. Pulling force: 6.5 T at 250 m/min. Capacity: 6800 t/annum Entry tube dia.: up to 42 mm Wall thickness: up to 2.0 mm Exit tube dia.: 5 – 39 mm Wall thickness: min. 0.3 mm

plate thickness: 1,2 mm 0: 62 mm weight of the machine ca.: 50 kg Producer: Sahinler Type: IK 1,2 YOM: new Shaft Length: 140 mm Bordering Capacity: 1,2 mm Roll-Ø: 62 mm Throat Depth: 100 mm Dimensions of the Machine (LxWxH): 560 x 220 x 500 mm Weight: 50 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 0,8 mm 0: 52 mm weight of the machine ca.: 30 kg Producer: Sahinler Type: IK 0,8 YOM: new Shaft Length: 110 mm Bordering Capacity: 0,8 mm Roll-Ø: 52 mm Throat Depth: 80 mm Dimensions of the Machine (LxWxH): 380 x 180 x 380 mm Weight: 30 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Condition: Presentation Machine - Usable volume: 80 L

for 100-600 g , 350 - 1000 g

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Year: 2000, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2, Year :2000

plate thickness: 2,5 mm roll diameter: 98 mm throat: 160 mm total power requirement: 1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 550x1400x1500 m Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for sale is a timber truck from MAN, Curb weight 15150 kg, permissible total weight 26000 kg, overall dimensions L / W / H 10500 / 2550 / 4000 (mm), engine type V-engine / emission class EURO 6, / power 471 kW, transmission automatic, mileage 290,878, Palfinger Epsilon M12Z loading crane, Subject to prior sale, changes and errors!

Key data: 999 KW, 999 kVA, 999 V

Dear Ladies and Gentlemen, We hereby offer the following refurbished MAN replacement gas engines of the E08xx, E28xx or E32xx series. Description: • Refurbished gas engine, refurbished according to recognised quality standards • Complete engine, ready to use • Multi-cylinder V-shaped or in-line engine with water-cooled system • Water-cooled exhaust gas routing Engine versions and power ranges MAN E0834 > 60kW MAN E0836 > 75-100kW MAN E2876 > 190-210kW MAN E2848 > 250-270kW MAN E2842 > 360-400kW MAN E3268 > 350kW MAN E3262 > 530kW Repairs: • Engine block carefully checked, processed and cleaned (incl. sealing surfaces, bearing points and oil channels) • Crankshaft and camshaft checked to standard dimensions, machined and replaced if necessary • Cylinder heads as replacement components, tested and overhauled (incl. valve guides and seat rings) • Conne ...

Key data: 118 KW, 200 kVA, 400 V

Sokratherm Gas CHP GG 110iSI – MAN E2866 E301 Gas electricity and heat generator from 1998, with 21,019 operating hours, with control. 1 available 110 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Marelli Motori M7B 250 MC 4, 200 KVA Manufacturer: Sokratherm Model: GG 110iSI Type: Gas CHP Serial Number: 808259 Engine: MAN E2866 E301 – 118 KW Electrical power [KWel]: 110 Thermal power [KWth]: 200 Gas capacity [KWgas]: 344 Year of Make: 1998 Hours: 21,019 Weight unit [kg]: 3,320 Dimensions LxWxH [m]: 2.80 x 0.90 x 2.20 AC Generator Marelli Motori M7B 250 MC 4 Manufacturer: Marelli Motori Model: M7B 250 MC 4 Type: AC Synchronous Generator Serial Number: MD-1990 Power [KVA]: 200 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 289 Speed [1/min]: 1,500 Year of Make: 1998

Key data: 250 KW

MAN gas engine is available with very low hours. Type: E2842E312 Scope of supply: CHP Gas line Control Panel Exhaust gas cooler Enclosed silenced container

ONE Bending Testing Machine Load range up to 200kN Class 2 in the load range 40kN Class 1 in the load range 100kN Class 1 in the load range 200kN Indoor crane available for dismantling

Key data: 150 KW, 220 kVA, 400 V

Sokratherm Gas-CHP GG 140S oE Gas electricity and heat generator from 2010, with approx. 60,000 operating hours, with control and silencer. 1 available 140 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: MarelliGenerators MJB 250 LA4, 220 KVA Manufacturer: Sokratherm Model: GG 140S oE Type: Gas CHP Serial Number: F103064 Engine: MAN E2876 E312 Electrical power [KWel]: 140 Thermal power [KWth]: 216 Gas capacity [KWgas]: 392 Year of Make: 2010 Operating hours: approx. 60,000 Weight unit [kg]: 2,850 Dimensions LxWxH [m]: 3.00 x 0.9 x 2.4 AC Generator Marelli MJB 250 LA4 Manufacturer: MarelliGenerators Model: MJB 250 LA4 Type: AC Synchronous Generator Serial Number: MJB2572GT68MO Power [KVA]: 220 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 317 Speed [1/min]: 1,500 Year of Make: 2010

A Hitachi EX1200 Hydraulic Excavator is the basis of the Mantsinen 140 RHC to act as a Ship Unloader for billets. Maintenance records are available including recent major service description. The list of equipment includes several auxiliary parts, such as a lifting yoke, a lifting head and a beam. Make: HITACHI (Japan) – MANTSINEN (Finland) Model: EX1200 – 140 RHC Year (manufacture): 2003/2004 Mothballed since: July 2025 Working hours: circa 21,600 Maintenance history: Serviced in May 2025 incl. lift cylinders overhaul which means it is expected to run for approximately 930 hours until the next service Mass: 910 / 108,000 / 153,000 kg Cabin Elevator / Hydraulic Excavator / Ship Unloader Maximum load: 25,000 kg Engine power / type / family: 482 kW / S6R-Y2TAA-2 / SR-TAA Fuel: Diesel

Baguette Long Roller Major Manu FFBT M750 - Current type: 50Hz -Nominal voltage: 400 V -Electrical power: 0.55Kw

Used a fully functional and complete production line for bottling still and sparkling mineral water. The line consists of the following equipment: 1. SAMETO EBH 2050 101321ST PREFORM TILTER 2010 2. SIDEL SBO10 BLOW MOLDING MACHINE 2011 3. ALSIM AIR CONVEYOR 1999 4. ALSIM ASMOJET FILLER/RINSE/CAPPER 1999 5. ALSIM MAS-MIX 30/PC MIXER WITH CARBONATOR 1999 6. ALSIM BOTTLE CONVEYOR FOR FILLED BOTTLES 1999 7. ACI BOTTLE DRYER 15kW 2015 8. KRONES CONTIROLL K745G19 LABELING MACHINE 2004 9. ACMI FENIX C9332 SHRINK TUNNEL 2019 10. ALSIM PACKS CONVEYOR 1999 11. SMIPACK HA35-50-70 HANDLING MACHINE 2002 12. ALSIM VALIANT 1I 1P PALLETIZER 1999 13. OBS ROTOMATIC STANDARD PALLET WRAPPER #1 2009 14. OBS ROTOMATIC STANDARD PALLET WRAPPER #2 2009

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately

MAN D2866LF new crankshafts STD measure Special prices info@miw-zeven.de

Manifold System Satorius with 3 stainless steal funnel (100ml) for microbiological research

We can also repair your engine cheaply and according to your needs with full warranty. Mail=info@miw-zeven.de

Cylinder head Exchange

Cylinder head Exchange