mak 20 used for sale

Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.

TIG welding machine, TIG welding machine NIMAK type GS 200 WWIG and electric DC welding machine, E-welding machine also for rod electrodesFabr. No. 26642 Year of construction approx. 1983Power 200 Amp. = 60% ED 150 Amp. = 100% EDEinfinitely variable power adjustment rangeMains connection 380 Volt, 50 Hz, 32 Amp. Plug- 5 meter TIG hose packet- HF ignition- stepless current control and current rise- connection for electrode welding- direct current only- water-cooled- inert gas pressure reducerSpace requirement L x W x H 900 x 590 x 1000

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1600 mmThickness 110 mmWorking height 600 mmPlate thickness 30 mm throughoutWeight approx. 1000 kgGood condition, good surface; used

Tig Welding Machine L-TEC Type Inverter TIG 200 DCWIG Welding Machine for DC DCFabr. No. 184548 year of construction approx. 1994Power 200 Amp. = 60 % ED 155 Amp. = 100 % EDEinfinitely variable setting rangeCurrent type DC (direct current)Mains connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with central connection and hand torch- with remote potentiometer (foot switch)- gas pressure relief valve- direct current only = DC- HF ignitionSpace requirement L x W x H 850 x 480 x 740 mmWeight approx. 150 kgThe welding test results in very

Hydraulic Machine Vise ARNOBock width: 200 mmJaw height: 60 mmClamping force: 8 ton. Clamping range: 0 to 370 mmOpening width: max 373 mmGuideway height: 140 mm- 2 clamping ranges adjustable via plug-in pins- TurntableDimensions L x W x H: 900 x 400 x 210 mmWeight: 125 kgGood condition; used

High-current EMC filter SCHAFFNER type FS 20364-1200-993 phases, 3 x AC ballast, mains connection module, mains filterInput voltage: 3 x 400 VACEinput frequency: 50 / 60 Hz.Nominal current: 3 x 1200 AAndimension W x H x D: 135 x 260 x 235 mmWeight: 27.5 Kgvery good condition, from stock liquidation, unused2 pieces available, price per piece; used

E-chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DIwith Dematik BUS control via crane system controlFabr. No.61456646 Year of construction 2003Lifting capacity: 200 kgHook travel: 4.0 metersMain lifting speed: 14.0 / 19.2 m/min. Fine lifting speed: 0.20 m/min. Chain size 4.2 x 12.2 mm1 Load train = 200 kg- with control logic DKES2/5 500V- without crane operation- Dematik BUS control via crane system control- without roller chassisMains connection: 400 Volt, 50 HzNominal power: 750 WNenncurrent: 2.4

Handling device, handling system JÄGER HANDLINGManipulator for screwdriving technologyType: Handy-flex 200Horizontal movement: 450 mmVerticate movement: 600 mmLoad capacity: 4 to 10 kgThroat: 150 to 600 mmGuide column vertical: 25 mmGuide columns horizontal: 16 mmTool holder: 33 x 33 mm Screw clamping- Movable in three axes (horizontal, vertical, rotatable)- Rotary encoder KÜBLER for rotary movement type 8.5873.5320.B311. S003 - Displacement transducer BALLUFF for horizontal movement type BTL6-A110-M0450-A1-S115 - 2 pieces of balancer for horizontal movement

Measuring and marking plate cast steel-grey cast iron heavily ribbed STIEFELMAYER comes from a measuring machine with a hand-held measuring armhigh-precision measuring plate with a good surfaceMasch. No. 8530979 Year of construction approx. 1989Length 5000 mmWidth 2000 mmThickness 350 mmWorking height 690 mmPanel thickness 50 mm throughout- 15 height-adjustable feet- very precise and stable longitudinal guides, screwed to the side of the plateSpace requirement L x W x H 5000 x 2120 x 400 mmWeight approx. 7500 kggood surface; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmWidth: 1000 mmThickness: 240 mmWorking height: 850 mmPanel thickness approx. 30 mm throughout- 5 pieces height-adjustable feetWeight: approx. 1000 kgGood surface; used

Handling device, handling system JÄGER HANDLINGManipulator for screwdriving technologyType: Handy-flex 200Horizontal movement: 300 mmVertical movement: 370 mmLoad capacity: 10 to 14 kgProjection: 250 to 550 mmGuide column vertical: 25 mmGuide columns horizontal: 16 mmTool holder: 26 mm oval with screw clamping- Movable in three axes (horizontal, vertical, rotatable)- 1 piece balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg- Adjustable latch for the Vertical movement, manual unlocking via

E-chain hoist, electric hoist, crane STAHL type Si T 201-10/2,5No.: 1202373 year of construction 1989Load capacity 250 kgHook travel = lifting height 3.5 metersLifting speed 10 m/min. Fine lifting speed 2.5 m/min.2 load strands = 250 kgCable length of operating bottle approx. 1.4 metersMains connection 400 volts, 50 Hz.- Suspension eye on the top of the craneWeight: 22 kgGood condition; used

Chip conveyor, scraper conveyor with coolant tank BMF type KF 200 K17Ident. No: 0495078 Order No: 915979 year of construction 1992Metal link width 200 mmDistance driver bars approx. 380 mmLength of possible chip removal 1100/2100 mmInsertion length approx. 1350 mmInsertion height 370 mmInsertion width 460 mmHopper width at the top 400 mmHopper width at the bottom 170 mmConveying height - discharge height approx. 1250 mmMotor power belt drive 0.37 kWNetz connection 400 volts, 50 Hz- Drive of the scraper chain via geared motor-

Swing-cut guillotine shears KÖLLSCHEN type BSK 2000/2Fabr. No. 69 1307 Year of construction 1969Cutting length 2000 mmCutting thickness 2 mmStand projection 90 mmWorking height 920 mmMains connection 380 volts, 50 HzEngine power 4 kW- Drive via geared motor with brake and crankshaft- mechanical sheet metal hold-down- manual back gauge 500 mm- stop adjustment via 2 handwheels, rear on the backgauge guide with measuring scale- front side stop left 720 mm- electric foot switch- manual

Tig welding machine DALEX type GL/W 201TIG welding machineMachine no.: 201 0447 Year of construction approx. 1995Power 200 Amp. 35% ED 160 Amp. 60% ED 120 Amp. 100% EDEinfinitely variable adjustment rangeType DC - DCmains connection 400 Volt, 50 Hz, 5.9 kVA, 32 Amp. Plug- 2-stroke and 4-stroke welding device- TIG hose package 8 meters- HF ignition- Shielded gas pressure reducer- Electrowelding for rod electrodes- Fan cooling- Connection socket for foot switch (without foot switch)Space requirement L x W x H 850

Code: 0379 Brand: BRENNA + ELEPHANT - ITALY Model: GR 200 - CE Standard Manually operated jib crane with cantilever beam - CE Standard Lifting capacity 200 kg Chemical-anchored base Complete with: Electric hoist RWM Mod. W 125 T1 V1 Type F - Capacity 125 kg - Speed 8 mt/min - Motor 0,6 Kw - Rpm 1400 Pneumatic suction lifter ELEPHANT Mod. VLA6F with 6 plates suitable for handling sheet metal and other materials - Capacity 500 kg - Plate dimensions diameter 265 mm - Transverse and longitudinal plate adjustment - Compressed air operation with powerful and quiet vacuum generator - Operating pressure 6-7 bar Overall dimensions for transport mm 4000 x 1100 x 900 h + Pallet mm 2000 x 1300 x 600 h

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmwidth 1000 mmthickness 160 mmworking height 850 mmplate thickness approx. 35 mm throughout- 3 pieces height-adjustable feetWeight with feet 680 kggood condition; used

a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.

Pressing tool, clamping pad, square profile, support profile, square block -Square block: with through holes -Bore: Ø 78 mm -Number: 4x profile available -Price: per piece -Dimensions: 300/200/80 mm -Weight: 27.9 kg/pc.

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 24 mm -Dimensions: 300/205/H635 mm -Weight: 62 kg

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening platelength: 2000 mmwidth: 1000 mmthickness: 260 mmworking height: approx. 850 mmplate thickness: approx. 40 mm throughout- 5 pieces, height-adjustable feetWeight with feet: 1250 kggood condition; used

Folding machine FASTI type 2095-25-2,5Fabr. No. 94 295 004 Year of construction 1994Useful length 2540 mmmax. Sheet thickness 2.5 mmStroke of the upper beam 380 mmMotor power bending beam 2.2 kWWetz connection 400 Volt, 50 Hz- NC control FASTImatic FM100- one-piece pointed rail 135- controlled back gauge- continuous stop rail- controlled bending angle via control- electric foot switchesWeight 3000 kggood condition; used

turning diameter: 500 mm turning length: 1000 mm control: Mazatrol Smooth G number of spindle speeds: 5000 U/min spindle motor: 11/7,5 kW axis stroke (X,Y,Z): 450, 200, 960 mm travel -w axis: 950 mm b-axis: -30 / +210 ° c-axis: 360, 0,0001 ° bar material dia.: 65 mm milling spindle: spindle bore: 76 mm spindle turning speed range: 12000 U/min spindle motor: 7,5 / 5,5 kW tool taper: HSK A 63 rapid travel x/y/z: 40000 mm/min weight of the machine ca.: 9.5 t dimensions of the machine ca.: 3900 x 2600 x 2400 mm equipped with: - CNC control Mazak Smooth G - Main and counter spindle - milling spindle - Y-axis - Tool holder: HSK A 63 - Tool magazine: 72 places - Tool Eye - Mazak monitoring system B (RMP 60) - Coolant and compressed air (1.5 MPA) - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Straightening and welded plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1500 mmThickness 125 mmBoard thickness approx. 40 mm continuousTable height 880 mm- Table base made of steel (self-made)Weight 1700 kgGood condition; used

Pressing Force max.: 2000 Kn, Withdrawal force max.: 1500 Kn, Supporting force in pressing position max.: 1200 Kn, Die return force max.: 50 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 90 mm, Withdrawal travel max.: 90 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 60 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 26,0 Kw, Width aprox.: 2350 mm, Depth aprox.: 3500 mm, Height aprox.: 5900 mm, Weight of the press aprox.: 19.900 Kg, Press housing: 260 l (gear oil), Workplace-related sound: 78 dB (A)

Max. saw blade diameter: 520 mm Cutting height: 200 mm at 90°, 140 mm at 45° Cutting length: 420 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Pneumatic material tensioners Minimum quantity spraying device Powerful 5 KW motor

Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.

A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.

ANGER HCP 203 Production GENERAL Project No.: 905739 Quantity: 2 pcs. Manufacturer: ANGER Type: HCP 203 Control: Siemens 840 D Year of manufacture: 2005/2013 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION There are 2 production lines available. Each production line consists of three ANGER multi-spindle machining centers, each of which is connected to a KUKA robot. The loading and unloading of the EWAB conveyor belt is located at the back of the machines. ANGER (1) - 5-axis: 4 vertical milling and drilling spindles at the bottom, 4 vertical milling and drilling spindles at the top, touch probe at the top, 4 horizontal milling and drilling spindles at the left. Workpiece carrier with three linear axes and two rotation axes. ANGER (2) - 5-axis: 4 vertical milling and drilling spindles at the bottom, 6 vertical milling and drilling spindl ...

A right-sided Hebrock edge banding machine is available. Workpiece thickness range: 10mm-50mm, min. workpiece width: 70mm, min. workpiece length: 250mm, edge thickness (roll material): 0.5mm-5mm, max. edge height: 55mm, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. On-site inspection is possible.

Pressing Force max.: 2000 Kn, Withdrawal force max.: 1500 Kn, Supporting force in pressing position max.: 1200 Kn, Die return force max.: 50 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 90 mm, Withdrawal travel max.: 90 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 60 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 26,0 Kw, Width aprox.: 2350 mm, Depth aprox.: 3500 mm, Height aprox.: 5900 mm, Weight of the press aprox.: 19.900 Kg, Press housing: 260 l (gear oil), Workplace-related sound: 78 dB (A)

A rotary can seaming machine with double seaming function CCC is available. Stations: 6, can diameter range: 202mm-502mm, can height range: 100mm-700mm. An on-site inspection is possible.

A rotary can seaming machine with double-seaming function CCC, which was overhauled by Schmalbach Lubeca, is available. Throughput capacity: 360cans/min, can height range: 77mm-285mm, stations: 6. An on-site inspection is possible.

HYDAC ELECTRONIC, SET, Pressure Transmitter, HMG 2020-000-F + HDA + ETS Sensor Item condition: Used, in perfect condition For further technical data, please refer to the attached pictures. For further technical data, please refer to the pictures.

Two color pad printer GP 2002. The printer is intended for larger quantity jobs; closed system with foot pedal switch. Diameter of inside cup 6 cm. Format :215x100 mm. Available immediately.

: 0400 mm : 1250 mm : : 200 mm : 55 mm : 315 mm : 2700 U/min : D1-6 DIN 55029 : 73 mm : 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rheon V4 Stress Free Divider Type VX 202 -400 Year of construction: 2011 Output approx. 400kg /h Dough belt width 130-150mm Product weight approx. 50 -1,250g with single and double-row guillotine with spreading station with double-row weighing and outfeed belts with star cutter lubrication with 2 flours with digital control with funnel for approx. 50kg dough - overhauled and cleaned - Tapes, funnel mats, hoses, various bearings, etc. renewed - Availability: approx. 6-8 weeks after order

Granulating machine Manufacturer FREWITT Type MG 203 Serial No. 037/933 Capacity up to 1000 kg/h incl. 3x sieve inserts Dimensions of the machine: height approx. 1,000 mm, length approx. 880 mm, width approx. 710 mm, Screen size: 492 mm x 492 mm Net weight: approx. 200 kg The granulating machine is suitable for dry pelletizing, screening, crushing, wet pelletizing, granulating in sausage shape. The granules produced are extremely regular. The grain size is determined by using the appropriate sieves. The machine is driven by a three-phase motor 220/380 volts, 1 hp, via a continuously variable transmission. This adapts the speed of the rotor to the material to be processed. This achieves the maximum possible performance of the machine.

Beck Wand 1000/2000 Extraction Wall Extraction wall Type: Beck Wand 1000/2000 Extraction wall made of sheet steel, with 5 suction slots made of perforated sheet metal evenly distributed. For connection to a central extraction system via a suction nozzle at the top center of the extraction wall. Cleaning opening can be unscrewed at the bottom of the front of the wall. Uses: Extraction of process air during grinding and milling Extraction of gases and light dust Extraction of powder mix or other stationary dust-forming processes Width: 1000 mm Height: 2000 mm + 100 mm nozzle Depth: 300 mm Suction nozzle: NW 250 top center Recommended extraction capacity: 3000 m3/h Paintwork: RAL 5018, RAL 7032 Weight: approx. 75 kg Manufacturer's price: 2970,-€ More items - new and used - can be found in our shop! International shipping costs on request!

Inv. Num. : 8570 Type: SU 50 A/2000 Producer: TOS Generated: Parameters: Maximum turning length: 2000 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter via support: 250 mm Weight: 3260 kg Equipment: Digital measurement

for sale 2 MWM year 2010 hours 42 000 complete container installations

Highly flexible filling and sealing machine GMP Execution Manufacturer: Zellwag Type Z-201 S-2 Machines No. 1050 Year of construction 12/2017 Commissioning 03/2019 The machine is equipped with : Circular multi-format prism transport system Filling module with 2 rotary lobe pumps and immersion nozzle system 1 set of dosing volume 10-35 ml 1 set of dosing volume 30-155 ml Sorting and feeding system for stoppers Sorting and feeding system for screw caps or pill-proof caps Stopper setting station 2-fold Screwdriving station 2-fold Pill proofing station 2-fold Bottle height 74.2mm – 142.9mm, technical limit 160mm, Bottle diameter 29.0mm – 61.7mm, technical limit 65mm Output up to 50ml - 40-50 pcs/min up to 125ml - 30-35 pcs/min. up to 250ml - 25-30 pcs./min. complete documentation incl. requirement profile/URS; FAT; Qualification plan DQ; Risk ana ...

Rotary Brush Screen WESTFALIA BSB 200 Properties Type BOD 200 Machines No. 1 684 639 Total height 2500 mm Total length 600 mm Depth 600 mm Manufacturer: Westfalia Separator AG

STEIN Maschinenbau Profile Guillotine PT1-200 For glazing beads, small profiles, main profiles and technical profiles Max. cutting width: 190 mm, max. cutting height: 120 mm Extrusion speed: up to max. 10 m/min Blade length: 600 mm Length accuracy: +/- 2 mm Knife stroke: 180 mm Cutting speed infinitely variable Pneumatic quick-change device for knives Hold-down device pneumatic Knives are preheated: 80ºC - 160ºC Cycle time: 1.5 to 4 sec. adjustable on the display Infeed side: unit for applying a protective film to the profile Control: Compact PLC Siemens S7-613C Dimensions: Height: approx. 1,900 mm, extrusion height: 1,100 mm (+/- 50 mm height adjustment) Footprint: approx. 1,450 x 800 mm (without inlet and outlet tunnel) Condition: very good, ready for use

Crimper Manufacturer: Pamasol Type 2002/20 Capacity: 500-700 containers/hour The machine works pneumatically and is started with the two-hand solution. The crimping knife and crimp height can be adjusted to the desired dimension from the outside. Before closing the container, the machine presses the verntile onto the container with the set contact pressure. The contact pressure can be adjusted separately. Scope of application: container height 30-330 mm, container diameter 22-66 mm Operating pressure 8-10 bar Weight 75 kg Dimensions: 700 x 700 x 1000 mm