2 pieces (identical) used lathes
Turning center milling center INDEX R200
INDEX VirtualLine
Year of construction 2011 and year of construction 2009
At that time, the original price of both machines together:
€1,385,647.90 gross
Regular service only from the manufacturer INDEX. Service and parts
exchange alone between 17.04. and 05.08.2025 in the amount of €
96,305.41 (invoices are available for inspection).
Therefore, the machines are in absolutely excellent condition.
Spindle hours (as of 21.11.2025) Year of construction 2011:
S1: 4,114 h
S2: 3,064 h
S3: 2,535 h
S5: 4,170 h
Spindle hours (as of 21.11.2025) Year of construction 2009:
S1: 2,951 h
S2: 953 h
S3: 3,524 h
S5: 5,990 h
Turning-milling centre with roller bearing slide guides
Work spindles can be moved on slides. Tool carrier integrated into
recesses in the machine bed, all linear axes arranged at right angles
to each other. carriage guides. Main drives and axle drives completely
in AC technology.
Glass scales in all linear axes.
Rotary encoders in the rotary axes.
The following minimum values are guaranteed
- Position tolerance:
P in all X.Y.Z axes to
VDI/DGQ 3441: 1.01 mm
By means of laser measurement
Main spindle D65
Spindle head holder AD140mm. ID 85mm
Material passage max. mm 65
Speed max. 1/min 5000
Front bearing diameter mm 110
Power 100 %/40 % kW 7.5/35.5
Torque max. 100 %/40 % Nm 125/170
Adjustable synchronous three-phase drive as hollow shaft motor
Main spindle carriage Z-axis:
Drive via AC motor and ball screw.
Glass Scale Measuring System (abs.)
Travel mm 390
Rapid traverse speed m/min 45
Feed force N 4000
Main spindle hollow clamping cylinder D65/20 f. Clamp or chuck
clamping.
Hydraulically operated, with clamping travel measuring system.
Stroke mm 20
Clamping pressure min./max. Bar 8/80
Piston area pressure cm² 57
Piston area pull cm² 57
Compressive force max. kN 45.6
Pulling force max. kN 45.6
Alignment and switching device.
Pitch 2.5 degrees over detent disc
C-axis
Drive: Spindle hollow shaft motor
Angle measuring system directly on spindle
Resolution 0.00014 degrees
Position Spreading Width (VDI/DGQ 3441)
Psmax = 0.01 degrees
1-clamping pressure device
Clamping pressure adjustable from 8 to 80 bar
via input mask on the control panel
for clamping cylinder main spindle.
Tool carrier 1 with motorized milling spindle
HSK A40 tool system
X-axis drive via ball screw.
Weight compensation X-axis hydraulic.
Glass Scale Measuring System (abs)
X-axis travel mm 350
under spindle center mm 50
X-axis rapid traverse m/min 45
X-axis feed force N 4000
Hydrostatically mounted quill for Y- and B-axis.
Driven Y-axis via ball screw.
Measuring system glass scale (abs) in Y-axis.
Y-axis travel mm +/- 80mm
Y-axis rapid traverse m/min 15
Y-axis feed force N 10 000
B-axis direct drive (torque motor),
hydraulically operated holding brake.
B-Axis Swivel Angle Degree 230
B-Ache Torque 25 % Nm 440
B-Axis Angular Resolution Degree 0.001
Holding torque brake approx. Nm 2000
Motorized milling spindle with tool system
HSK A 40.
Hollow shaft motor. Holding brake hydraulic.
Tool clamping via diaphragm spring set.
Loosening hydraulic, latching clamping set, inner
and external coolant feedthrough.
Power 100 % KW 11
Torque 100 % Nm 19
Speed max. 1/min 18 000
Holding torque brake Nm 200
max. drying time
of the coolant rotation
Lead min 30
Holding force clamping set approx. N 10 000
2x3 Tool Stations VDI25
for fixed tools on WT1 XYB
Tool carrier 2 with motorized milling spindle
Tool system HSK A 40
Hydrostatically mounted quill for Y- and
B-axis.
Drive Y-axis via ball screw.
Measuring system glass scale (abs) in Y-axis
Y-axis travel mm +/- 80mm
Y-axis rapid traverse m/min 15
Y-axis feed force N 10 000
B-axis direct drive (torque motor),
Hydraulically operated holding brake
B-Axis Swivel Angle Degree 230
B-axle torque 25 % Nm 440
B-Axis Angular Resolution Degree 0.001
Holding torque brake approx. Nm 2000
Motorized milling spindle with tool system
HSK A40, direct drive with oil-cooled
Hollow shaft motor, holding brake hydraulic.
Tool clamping via diaphragm spring set.
Loosening hydraulic, latching clamping set, inner
and external coolant feedthrough.
Power 100 % KW 11
Torque 100 % Nm 19
Speed max. 1/min 18 000
Holding torque brake Nm 200
max. drying time of the
Coolant rotary union min 30
Holding force clamping set approx. N 10 000
2x3 Tool Stations VDI25
for fixed tools on WT2 YB
Tool changer with chain magazine.
Push-over units pneumatic.
1 double gripper on 2 linear units each
for independent tool change
on tool carriers 1 and 2.
Number of tools 80
Tool system HSK A 40
Rapid traverse linear unit m/min 120
Chip to chip time
(according to VDI2852 Bl.1) sec 4.5
Chain pitch mm 53
max. tool diameter mm 80
(Neighboring stations must be free !)
max. tool length mm 180
max. tool weight kg 1.5
Sub-spindle D65
Spindle head holder AD140mm. ID 85mm
Material passage max. mm 65
Speed max. 1/min 5000
Front bearing diameter mm 110
Power 100 %/40 % kW 27.5/35.5
Torque max. 100 %/40 % Nm 125/170
Adjustable synchronous three-phase drive as
Hollow shaft motor
Sub-spindle carriage Z-axis:
Drive via AC motor and
Ball screw.
Glass Scale Measuring System (abs)
Travel mm 390
Rapid traverse speed m/min 45
Feed force N 4000
Minimum distance to the main spindle
(Collet) mm 20
Sub-spindle hollow clamping cylinder D65/20
for clamp or chuck clamping,
hydraulically operated, with clamping displacement measuring
system
Stroke mm 20
Clamping pressure min./max. bar 8/80
Piston area pressure cm² 57
Piston area pull cm² 57
Compressive force max. kN 45.6
Pulling force max. kN 45.6
Alignment and switching device.
Pitch 2.5 degrees over locking disc.
C-axis
Drive: Spindle hollow shaft motor
Angle measuring system directly on spindle
Resolution 0.00014 degrees
Position Width (VDI/DGQ 3441)
Psmax = 0.01 degrees
1-clamping pressure device
Clamping pressure adjustable from 8 to 80 bar
via input mask on the control panel
for clamping cylinders counter spindle
The R200 machine has as standard
via a central water interface
for cooling the drives and spindles
as well as the control cabinets of the machine.
Water-based coolant with
Glycol content of 25%.
Coolant flow temperature 20° +- 2°
Coolant amount l/min
Working pressure between bar on
Coolant connection of the machine.
Max. permissible machine-side
Coolant pressure 8 bar.
Cooling unit for cooling the spindles
and the machine control cabinet.
Net cooling capacity 15 KQ (50Hz/400V)
INDEX Control C200-4D SL
Modular multi-processor control
integrated into digital SINAMICS
Inverter system from SIEMENS
(identical in construction to SINUMERIK 8400 SL).
Control panel -AT compatible PC with
Operating system WINDOWS XP and
15 inch flat screen (1024x768).
USB 2.0 port for keyboard, mouse
and data exchange via external USB
Floppy drive or USB stick
(not included).
PLC adaptation control – integrated
PLC317-2DP (SIMATIC S7-300).
Decentralised machine peripherals SIEMENS
ET200S via profibus DP and integrated
ProfiSafe security technology.
Channel structure, simultaneous processing
of several NC programs in
Dependence on machine equipment.
CNC user memory up to 3 MB
buffered for part programs, tool
data, variables, and macros.
Central mass storage for users
on hard disk for selective data -
replacement with CNC user memory.
Mains voltage 400V
Electrical frequency 50 Hz
User documentation
Instructions (1x paper)
General information
Safety
Service
Programming Notes
Emergency maintenance
Maintenance
Structure and function
Stages
Transport, installation, commissioning
Programming Guide
Tool Holder Catalog
Plans and drawings (1x paper)
Workspace plans
Assembly drawings
Hydraulic Diagrams
Pneumatic Plans
Lubrication Schedules
Electrical diagrams (in the control cabinet)
CD/DVD with user documentation
(all documents in PDF format)
Instructions
General information
Safety
Service
Programming Notes
Programming Guide
Emergency maintenance
Maintenance
Structure and W51232897 function
Stages
Transport, installation, commissioning
Error Notes
Plans and drawings
Workspace plans
Assembly drawings
Hydraulic Diagrams
Pneumatic Plans
Lubrication Schedules
Electrical Plans
Spare and wear parts
as a tree structure and
Microsoft Excel file
Parts list with drawings
Tree structure with links
End of material indicator light and fault.
Color: Blue
Clamping devices on the main spindle:
Three-jaw wedge bar power chuck
KNCS-N 170-43 Z140 (SMW) with
Quick-change jaw system for spindle
head with cylinder mount 140 mm, incl.
Basic jaws GBK. without top jaws.
Material passage max. mm 43
Jaw stroke mm 5.1
Total clamping force max. kN 60
Actuation force max. kN 32
Speed max. 1/min 6300
Main spindle expansion stages
Foot switch for force voltage of the
Main spindle
Stop device incl. coolant
by main spindle with solenoid valve
Coolant via main spindle with
Solenoid valve
Sub-spindle expansion stages
Stop device incl. coolant
by counter spindle with solenoid valve
Coolant via sub-spindle with solenoid valve
Chip hinge belt conveyor
Discharge height 1250 mm with integrated
Coolant tank included
Lifting pump with 100 L/min
Basic system 900L with
Profibus interface.
Float switch control
with 3 switching points (Min/Max/Not-Max)
and control cabinet. Suitable for assembly
of cleaning systems of the KF/VRF TYPE
Pure water tank 1500 x 600 mm
Cooling lubricant - fine stone cleaning
Installation to the right of the machine
Low-pressure pump on coolant
Tank with 8bar / 80 bar L/min
(KMR with Profibus interface)
medium-pressure pump on coolant
Tank with 20bar / 30 L/min
(KMR with Profibus interface)
Cooling lubricant fine stone cleaning by
Compact band filter on the right. Type KF150
Control of the paper feed via
Float switch.
Flow rate 150 l/min when using
Emulsion
Flow rate 120 l/min when using
oil and viscosity up to max. 10mm²/s
Single filter on coolant tank
Pump capacity below 20 bar with filter element
PI38040 DN DRG100 NBR
Single filter on coolant tank
from 20 bar pump capacity with filter element
PI38040 DN DRG100 NBR
Preparation for the connection of a
Coolant mist, extraction and filter
system to the machine.
Composed of:
mechanical with suction nozzle 200mm
electric with 230 V socket
fused with circuit breaker 10 A
Management of internal tools with
Setup dialogue. Tools that are used in the parts production
gram are addressed with the
the following data:
Geometry data (preset,
Working geometry)
Adapter data
Monitoring data (number of units,
Tool life)
Multiple Assembly: Siblings
WZ consideration within the same
WZ carrier or internally automatic
accessible WZ magazines (plate magazine)
max: 200 tools
max: 200 cutting edges
max: 4 cutting edges per tool
The built-in network adapter allows
the integration of the machine into a customer's
network via 100 Mbit/s Ethernet (Fast Ethernet).
On the customer's side, a network connection
(RJ-45 Patch Cable) with the mains socket
on the control cabinet and to implement the network
Identifiers (computer name, iP address, etc.)
in the PCU50.
Location of the machine: 76661 Philippsburg
The machines can be viewed on site. It is still energized and works
perfectly.
You can make an appointment for a viewing at any time before
bidding.
We would love to hear from you.
We will be happy to answer any questions you may have at any time.
We are looking forward to a good cooperation and thank you for your
interest in advance.
Germany
76661 Philippsburg
