mak 20 used for sale

Key data: 160 KW, 200 kVA, 400 V

MODEL: EQ-VP200160 GENERATOR ENGINE: Volvo Penta TAD732GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 200(kVA) / 160(kW) CYLINDERS: 6 STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1700kg DIMENSIONS L/W/HEIGHT (MM): 252010601530 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight pr ...

Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

:::TECHNICAL SPECIFICATIONS::: CNC Model: Mazatrol Spindle nose: ASA 6 Spindle power: 22Kw Number of main spindle speeds: 5000 Turning Diameter: 540mm Self-centering diameter: 210mm Bar Passage: 51mm Turning length: 1018mm Number of tools: 40 Spindle power: 7.5Kw Number of spindle speeds: 6000 X-axis travel: 530mm Y-axis travel: +- 70mm Z-axis travel: 1065mm Adjustable B-axis travel: 1065° Fast feeds for linear axes X Y Z: 30m/min Tailstock: yes Steerer stroke: 140mm Chip conveyor: belt Presetting: yes :::D DIMENSIONS AND WEIGHT::: Length: 3500mm Width: 2100mm Height: 2500mm Weight: 5700Kg

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

Pressure transmitter for measuring gases, vapors and liquids ROSEMOUNT 2088

Sick UE 48-20S2D2

bore capacity in steel (diameter): 3 - 5 mm throat: 150 mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Various Special purpose drilling machines The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15000 kg height: 790 - 1350 mm width: 2000 mm : ja : 120 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grain cleaning Schmidt Seeger TAS 206 Capacity 200 t/h Wheat, spare sieves etc.

Cutter Kilia 200 liter Express, surface, bowl lid and bowl stainless steel, noise protection lid, loading, ejector, knife shaft brake, knife shaft speed 2-touring

For sale is a top-equipped system for briquetting including silos, conveyor technology and packaging unit, consisting of the following components: For sale is a comprehensive briquetting plant including silos, conveyor technology and packaging unit, consisting of the following components: Silo and discharge technology 2x steel silos, each approx. 20 m³ usable capacity Including silo discharge systems Briquetting presses 1x Briquetting press SPM PAWERT AG, Type 84/1 - I 90/200, Masch.-Nr. 1060, Power: 55 kW 1x Briquetting press SPM PAWERT AG, Type 96/1 - I 90/200 SBP, Masch.-Nr. 1140Bj.2021 Conveyor and transport system Complete transport route including: • - 2 cooling lines • - All conveyor belts, roller conveyors and accessories Cutting & packaging technology 2 cross-cut stations with noise protection cabin 1 Feeder KÖRA Packmat, type presumably EF-235 1 shrink pack ...

Key data: 200 KW, 250 kVA, 400 V

Generator Set Specifications: Model: EQ-I250200 Primary power: 250 kVA / 200 kW Standby power: 275 kVA / 220 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TE8P Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3770 mm Width: 1350 mm Height: 2370 mm Weight Open: 2790 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil l ...

Industrial cutter Seydelmann K 206 Ultra, 200 litre bowl made of stainless steel, largely solid stainless steel, operation via cross lever switch, separate digital display, main cover and product ejector hydraulic, transparent noise protection cover made of special plastic, separate stainless control cabinet with built-in main switch, central lubrication point for knife shaft, balanced, exchangeable knife head, 2 knife speeds, 2 mixing gears forward, 2 separately switchable Bowl speeds, DGA control, temperature sensor, 6-knife head, 400 volts, 50 Hz, 200 amps

Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL

Key data: 160 KW, 200 kVA, 400 V

Generator Set Specifications: Model: EQ-I200160 Primary power: 200 kVA / 160 kW Standby power: 220 kVA / 176 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TM7 Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3150 mm Width: 1056 mm Height: 1900 mm Weight Open: 2000 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil  ...

CNC lathe WIA L 200 SY Manufacturer: Hyundai YEAR: 2014 Control Fanuc ... Fanuc 31i Turning diameter ... 550mm Rotation length... 530mm Axis Y ... +-40mm Counter spindle Spindle bore... 70mm Tool turret... 12 L x W x H ... 3045 x 1707 x 2021mm Machine weight ... 4600kg The machine is in good condition, possible to test under power.

Manufacturer/ Make: SKODA Typ/ Type: W200 Year of construction/ year: 1987 X-way: 11500 mm Y-way/ Y-way: 4500 mm Spindle diameter: 200 mm

Key data: 16 KW, 20 kVA, 230 V

Made in the EU 30 months warranty Stamford Alternator ComAp Control Module Power Generator Specifications: Model No.: EQ-P2016 Prime Rating: 20 kVA / 16 kW Standby Rating: 22 kVA / 17.6 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Make: Perkins Motor Model: 404A-22G1 Bore x Stroke (mm): 88 x 110 Displacement (L): 2,216 Compression Ratio: 23.3:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions of the unit: Length: 1600 mm Width: 650 mm Height: 1250 mm Weight open: 560 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-co ...

An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Key data: 1140 °C

Continious Brazing/Sintering furnace manufactured by Mahler. Type: Humpback (lower H2 consumption). Belt width: 450mm Clearance above belt: 200 mm Heating length: 5000mm Gross throughput: 600 kg/h Electric heating power: 198 kW Service temperature: 1140 Adjustable range of belt speed: 100-1000 mm/min Temperature cotroul groups: 5x Total length: 30m width: 1,8m height: 2,8m Hydrogen connection: 0,1bar 30Nm3/h (type 3.0) Nitrogen connection: 0,1 bar 60 Nm3/h (type 5.0) Exhaust gas : 300 m3/h Furnace is in use, and was regularly serviced. In 12. 2024 brick lining, heating elements, thermocouples, mesh belt and muffle was replaced . Spare parts are available, in case of interest, can be subject of seperate agreement. Offer includes: - Water cooling system with glicol base heat exchanger - Exhaust tubes (2x around 5m Stainless steel) - 5x sensor system to detect ex ...

An original control cabinet dismantled by PAAL Konti 200B, built in 1987. It is based on analog relays. It is also suitable for the other models such as: Konti 125, 200, 275 , depending on model and drive power. A complete control cabinet, functional

Good working conditions

0: 4000,5000 mm Working height: 120 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part Number: 7687 SPECIFICATIONS - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2pcs - sieve dimensions 40x40mm - toothed pulling shaft at the bottom - lower shaft motor 4kW - toothed pulling shaft from above - upper shaft motor 4kW - belt feeder - length of the feeding belt 4720mm - width of the feeding belt 500mm - main motor 75kW - Autoewers (adjustable) - total dimensions of the machine length/width/height 3100x2000x1830mm - total dimensions of the feeder length/width/height 4800x780x980mm - weight about 5000kg ADVANTAGES – made in Germany – autorewers – used chipper, very good condition Net price: 120900 PLN Net price: 28447 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)

General Information Brand: Nissens Product Type: Hydraulic Oil Condenser Dimensions (LxH): 150 × 210 cm Quantity: 1 unit Price: Per piece Technical Specifications Cooling Motor: Power: 2 × 2.2 kW (Total: 4.4 kW) Voltage: 230V / 400V Speed: 950 rpm Number of Motors: 2 pieces Operating Parameters: Max Operating Pressure: 5 Bar Max Temperature: -30°C to 65°C Cooling Type: Air-cooled Cooling Medium: Hydraulic oil Key Features ✅ High Cooling Efficiency: Designed for heavy-duty hydraulic applications ✅ Durable Construction: Built to withstand industrial conditions ✅ Dual Motors for Enhanced Performance: Ensures optimal heat dissipation ✅ Wide Temperature Range: Operates in extreme temperatures ✅ Versatile Voltage Compatibility: Supports both 230V and 400V systems Typical Applications Hydraulic Systems: Cooling oil in industrial hydraulic  ...

Wintersteiger DSG 150/200 Thin-cutting creel with center cut device and planing device Cutting width: 150 mm | Cutting height: 200 mm For sale is a professional thin-cutting creel of the type Wintersteiger DSG 150/200, equipped with a center cutting device and integrated planing unit. The machine is ideal for precise slat production with minimal material loss – especially in the parquet, furniture and solid wood processing sectors. Specifications: • Cutting width: up to 150 mm • Cutting height: up to 200 mm • Minimum fin thickness: approx. 1.5 mm • Kerf: from approx. 0.9–1.2 mm (depending on the tool) • Stroke rate: up to 450 strokes/min • Feed speed: approx. 0.3 – 1.8 m/min • Main motor power: 11 kW • Cutting accuracy: ± 0.1 mm Equipment: • Center incision device for centric incisions • Integrated planing device (double planer)  ...

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800

0: , St. Width: 1080 mm Length: 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bottling line KP 2010 Automatic bottling line for bottles. Filling up to 2 liters 6-head filling Speed + 3000 bottles / hour depending on bottle size and product Material stainless steel Lightweight construction, wheels underneath, easy to move Conveyor slatband type, length 4 meters Gutter under the conveyor Electricity 380 v. Compressed air: 6 bar

Introducing the Danstoker A-S Boiler – Reliable, Efficient, and Built to Last! Specifications: Model: EEB-W HT Serial Number: 78-6155 Year of Manufacture: 2009 Max. Heat Output: 1005 kW Max. Steam Rating: 6.0 Bar (Design Pressure) Design Temperature: 110°C Test Pressure: 9.0 Bar Water Volume Capacity: 3143 Liters This high-performance boiler is engineered for durability and efficiency, making it ideal for industrial applications. With its robust construction and certified design, the Danstoker A-S ensures reliable operation under demanding conditions. Perfect for businesses seeking a trusted heating solution! for more Details: 07379844145 financeukpowergeneratorsltd.com hashtag#Danstoker hashtag#IndustrialBoiler hashtag#Efficiency hashtag#Reliability hashtag#HeatingSolutions hashtag#EngineeringExcellence Private Notes

0: 3.700mm, 5.100mm, 6.100mm mm Working height: 160 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3.700mm, 5.100mm, 6.100mm mm Working height: 160 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used dough weigher W&P, Type: Parta U 2002 -Refurbished- - Frequency controlled - completely overhauled - Condition: Very good, ready for immediate use - 6 months warranty - Capacity: 1,230 - 2,840 pcs./h - El. Connection: 3x 230 / 400 V, 50 Hz, 3 / 10 A The machine has been completely overhauled and is immediately ready for use. Viewing and test run are possible by arrangement.

Optical sorting machine with material feed (via 2 stainless steel infeed hoppers and 2 electronically controlled vibratory chutes), material chute (made of specially coated aluminium), optical unit (4 high-resolution monochrome cameras with 2,048 pixels each; integrated image processing with a resolution of 0.09 mm) and blow-out system (144 high-speed blow-out nozzles with 1,400 cycles per second). The machine can be used, for example, to remove particles of different colours or foreign bodies from a material stream. Throughput: 500 to 800 kg/h (for quartz sand 0.1 - 6.0 mm). IP6X protection class for dustproof operation; incl. connection for external dust removal. Dimensions: 1.4 m wide x 1.8 m deep x 1.90 m high.

New hotbox in the industry standard for max. 200 bar and up to 28 liters per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

Robots from Fanuc, installed since 2022

2 x 10 T, adjustable from 1.3 to 10 T Plunger size 250x250mm forward 10 mm second Backwards 25 mm second Travel 100 mm per side, Interior 200 to 400 mm Two-hand operation Motor 1 KW Tank for 60 L hydraulic oil the machine can also be supplied in other sizes and thicknesses.

grinding length: max. 630 mm grinding width: max. 200 mm workpiece height: . mm x-axis: max. 250 mm y-axis: max. 710 mm distance spindle center to table: max. 500 mm table surface area: 0,25 mm table load: max. 1,1 t table speed -stepless-: 2 - 18 m/min cross feed autom.: . dust exhaust: 0,25 kW coolant pump: 0,09 kW total power requirement: ca. 4,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke, - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed The data for this ad was cr ...

Doka Frami panel formwork 1.20m Handy and lightweight steel frame formwork for foundations, walls and columns. The lightweight Frami steel formwork with a robust, hot-dip galvanized steel frame is ideal for fast formwork with and without a crane. Fast and universally applicable thanks to many practical product details Cost-efficient due to excellent system properties Easy handling and planning thanks to practical element grid Excellent concrete results due to particularly stable design Doka Frami framed formwork 1.20m Light and manhandled steel-framed formwork for foundations, walls and columns The lightweight Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly, anywhere thanks to its many practical details Cost-effective because of its outstanding system attributes Easy handling and planning ...

Bosch Turbo Scara SR6 Swivel Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and load capacity (up to 8 kg), the robot is predestined for assembly work and fast pick & place movements. The turboscara SR6 and SR8 are swivel-arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and different lifting distances • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS program ...

hydraulic tipping tank or tipping bucket Price: 800,-p.pcs. + VAT reclaimable: R928 hydraulic tipping trailer, tipping wagon MAFI hydraulically tiltable by means of a manual hydraulic pump. Load capacity 2000 kg Overall height 2000mm Inner body dimension Br.1900mm Flat 900mm top 1450mm 2 pieces are to be handed in Because they have been stored for years, they are partly rusty or the paint is peeling off. Otherwise very good technical. Condition in my opinion see also photo of the cylinders easily convertible as a tipping container on a forklift (has been done before) unscrew the chassis weld on 2square tubes for fork mounting Unscrew the manual hydraulic pump with quick couplings and adapt it to forklift hydraulics It is best to visit and try it out for yourself. I had several at one of them the chassis was removed and the holder for forklifts was welded on, intended for wo ...

pressure: 200 t distance between columns: 1600 mm max. ram stroke: 600 mm dayligth: 900 mm table width: 1600 mm table depth: 1300 mm table height: 1060 mm ram surface: 1600 x 1300 mm T-slots: Din 650 / 22H12 rapid traverse: 400 mm/s return speed: 325 mm/s pressing speed: 42 mm/s bei 40% mm/sec pressing speed: 20 mm/s bei 100% mm/sec die-cushion pressure: 800 kN die cushion stroke: 150 mm speed of die cushion: auf 68/ ab 225 mm/s The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 200 mm Cutting height: 80 mm cutting width: 180 mm Motor output: 350 W Table dimensions: mm Table tiltable: 45 Grad saw band length: 1400 x 6,5 x 0,35 mm machine weight ab.: 12 kg Dimensions (L/W/H): 700 x 600 x 700 mm Wood band saw with extendable and swiveling saw table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Basket to keep the glove

FETTE TABLET PRESS 2090 Year of manufacturing: 2003 High speed tablet press. Operating area enclosed within four double walled Perspex safety guards. double walled Perspex safety guards • the product to be filled is placed in a stainless steel hopper and guided through a Fill-O-Matic motorised powder feeder into the mould cavities, which can be easily dismantled for cleaning • can be connected to an external dust extraction system via connection ports in the upper part of the housing PRODUCTION • works with interchangeable moulds • can produce capsule shaped tablets • Production: 216,600 tablets/hour (max; with turret installed) • Tablet dimensions: up to 25 mm Ø (max) • Tablet thickness: 8.5 mm (max) Number of stations: 29 • Compression: 100.0 kN (max) • Pre-compression: 100.0kN (max) • Filling depth: 18.0 mm (max; with suitable cam) • Rotation speed: ...

working width: 2000 mm for sheets up to: 3 mm Clear stand width: 2050 mm Stand discharge: 250 mm Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Weight: 2.7 t

Make Duplo Model Ultra 205A Year 2010's Min size 210 x 297 mm Max size 521 x 710 mm Substrates 120 - 350 grams Speed 10-40 meters per minute (roughly up to 4,500 A3 sheets per hour) Feeder SF-205 Automatic suction feeder Details batch counter, cleaning function, air knife, touch screen controls, set up by the computer

This is an Ultravent hood from the premium manufacturer Rational, type UV 201/E, suitable for the combi steamers SCC, CMP 201 from 10.2011 to current model series. (index H and I), including connection kit. The hood has been tested in our in-house workshop and is fully functional. EIA. Ultravent hood: 4329 € net The price quoted is net plus 19% VAT. Service: We will be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: •6 months warranty on all electrical parts •High-quality brand-name appliances at fair prices •Professional overhaul / inspection & expe ...

An indestructible machine for the toughest conditions. The machine is suitable for processing raw wood. The machine has no inclination. The saw blade is located directly on the motor. Technical parameters: Maximum saw blade diameter: ø 500/mm Power of the main motor: 5.5 kW Main speed of the saw blade: 2850 rpm Maximum cutting height: 85 mm (with 350 mm saw blade) Inclination of the saw unit: NO Dimensions of the iron table: 1050 × 600 mm Aluminium formatting table: 2000 × 360 mm / OPTION 3200 x 360 mm Formatting table for hardened rods (Altendorf principle) Cutting length: 2000 mm Weight of the machine: 450 kg Given the prices of new Chinese machines that cannot withstand the harsh conditions, this machine is the solution. Made in Slovakia in Europe