british flag
Resale Logo

magnet used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used engines and spare parts  Motoren Steffens GmbH  http://www.motoren-steffens.de 
banner logo
start page > keywords magnet > results
920 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121132952 503

METSO LINDEMANN 3000HP ZZ225x260 Zerdirator for sale
Hammer mills


Make : METSO LINDEMANN Model : Powerzerdirator ZZ 225x260 Capacity (max. t/h): 90 Type of shredder: Hammer mill Year : 2008 Purpose: Ferrous + Non Ferrous Main power (HP): 3000HP Drive: Electric Number of rotor ...
used machine
 

Make : METSO LINDEMANN
Model : Powerzerdirator ZZ 225x260
Capacity (max. t/h): 90
Type of shredder: Hammer mill
Year : 2008
Purpose: Ferrous + Non Ferrous
Main power (HP): 3000HP
Drive: Electric
Number of rotors: 1
Length of rotor (mm): 2600
Diameter of rotor (mm): 2250
Feed opening (mm): 2500
Shred opening (mm): 2500
Output size (mm): -

Extra information:
Incl. feeding conveyor
Incl. magnet(s)
Incl. spare parts
2008
Price  
    request
121128386 503

HOFFMANN ZS 175x260 shredder for sale
Shredders


1250HP HOFFMANN Shredder With approx. 2.500 working hours Type of shredder: Hammermill / Shredder Power of shredder: 1.250HP Feed opening: 2.700mm Shred opening: 2.700mm Number of rotors: 1 Length of rotor: 2.60 ...
used machine
 
1250HP HOFFMANN Shredder
With approx. 2.500 working hours

Type of shredder: Hammermill / Shredder
Power of shredder: 1.250HP
Feed opening: 2.700mm
Shred opening: 2.700mm
Number of rotors: 1
Length of rotor: 2.600mm
Diameter of rotor: 1.750mm
Knives / Hammers: Hammers
Capacity: 25 - 35 t/h
Output size: Depending on grates
Main power: 920kW (1.250HP)
Year of construction: 2011

Additional information:
HOFFMANN shredderunit, top discharge, in excellent condition. Processed only 70.000 tons of scrap (approximately 2.500 working hours), incl. SCHORCH 920kW motor with fluid coupling, control unit, feeding chute, feeding rolls (chains and hydraulic), discharge shaker table and magnet drum.
! Note: the SCHORCH motor should be refurbished and a quotation of 45.000,- EURO is available for this job.
2011
550,000 €  
    request
121112117 212

MAGNET KFT 300L for sale
Compressors


Level compressor 300 litre fuel tank 11 HP
used machine
 
Level compressor 300 litre fuel tank 11 HP
2010
2,000 €  
    request
121061745 1200

VOEST - ALPINE for sale
Continuous casting line


Operating time approx. 7 years Construction continuous casting plant, 2 strands Segments radius / casting bow 7000 mm Strand cutting device 2 GEGA torch cutting machine with powder additive Burne ...
used machine
 
Operating time approx. 7 years
Construction continuous casting plant, 2 strands
Segments radius / casting bow 7000 mm
Strand cutting device 2 GEGA torch cutting machine with powder additive
Burner for emergency tapping 2 GEGA burners, permanently installed, pivotable model

Casting dimensions
Square: 100 x 100, 160 x 160
Round: 150, 180, 200
Flat: 100x240

Casting capacity as per the manufacturer
Dimension 100 x 100, ca.16,7 t/h
Dimension 160 x 160, ca. 22,00 t/h
Dimension 110 x 250, ca. 24,6 t/h

The continuous casting line consists out of the following devices:
Tudish
Casting rate control
Ingot molds
Oscillator, electromagnetic stirrers
Segmental arch 7000 mm
Cooling camber
Roller table
Strand cutting device (torch cutting system)
Stamping machine
Cooling section Operating time approx. 7 years
Construction continuous casting plant, 2 strands
Segments radius / casting bow 7000 mm
Strand cutting device 2 GEGA torch cutting machine with powder additive
Burner for emergency tapping 2 GEGA burners, permanently installed, pivotable model

Casting dimensions
Square: 100 x 100, 160 x 160
Round: 150, 180, 200
Flat: 100x240

Casting capacity as per the manufacturer
Dimension 100 x 100, ca.16,7 t/h
Dimension 160 x 160, ca. 22,00 t/h
Dimension 110 x 250, ca. 24,6 t/h

The continuous casting line consists out of the following devices:
Tudish
Casting rate control
Ingot molds
Oscillator, electromagnetic stirrers
Segmental arch 7000 mm
Cooling camber
Roller table
Strand cutting device (torch cutting system)
Stamping machine
Cooling section
1996
Price  
  PL   request
121061720 1300

ELETTROMAGNETE Eettromagnete for sale


Single stage electromagnet. For sale exclusively on 15.11.2017 day, at 11:00, in Fabriano (AN) for more information contact us at 0307751645

 
Single stage electromagnet.
For sale exclusively on 15.11.2017 day, at 11:00, in Fabriano (AN) for more information contact us at 0307751645
 
2,500 €  
  IT   request
121000387 103

INGERSOLL 120 x 144 x 24 ft for sale
Horizontal Floor Type Milling And Boring Machines


120" x 144" x 24ft Ingersoll 100 hp Single Spindle Openside Milling Machine – Re:24210 This machine consists of a bed and table and a main housing carrying a single spindle motor-driven head having vertical feed and ...

 
120" x 144" x 24ft Ingersoll 100 hp Single Spindle Openside Milling Machine – Re:24210

This machine consists of a bed and table and a main housing carrying a single spindle motor-driven head having vertical feed and traverse movement.

The bed has a finished pad on the left-hand side so that a bedwing and outboard support can be added to the machine when required.

Capacity:
Vertical distance from table to centerline of spindle 0-144"
Length of table feed and traverse 24'
Length of quill travel from face of head 0-24"

Bed (3 ways):
Width across travel ways 112"
Overall length, approx. 52.5'

Table:
Working surface width 120"
Working surface length 24'
Overall length 26'
• Power operated lock
• Johnson Drive
• T-slots & Pin holes

Housing:
Width across housing ways 90"

Head:
• Movement on housing is made through two (2) elevating screws.
• Hand-operated locks
• Contains a quill which carries the spindle
• Spindle is driven by a 100 HP adjustable speed drive DC motor through gearing
• Flywheel on spindle drive

Spindle:
• The spindle is equipped with a No. 450 taper, 4-1/2" in diameter at the large end, ¾" diameter taper per foot

Quill:
Spindle quill diameter 22"
Power and hand adjustment 24"
• Power adjustment is independent of table and head movement
• Hand operated lock

Spindle Speeds:
Spindle speed, approx. 10-130 RPM
• The spindle has three (3) ranges of speed. Medium starts at 14 RPM, and high-speed range is full capacity of the 100 hp drive motor.

Feed Distribution:
• The machine is arranged with two (2) 2-Motor feed boxes, one for the head feed and one for the table

Feed & Traverse Rates:
Feed Rapid Traverse
Table ¾" – 36" per minute 20 ft. per min
Head ¼" – 12" per minute 8 ft. per min
• Quill is equipped with an electronic feed motor providing feed and traverse movements ranging from ¾" – 24" a minute

Full Lubrication for all areas:

Motors and Electrical Equipment:
Qty. Description
1 Main Motor 100 hp, 575/1725 RPM, 230 volts, DC, drive motor
2 Feed Motor 7-1/2 hp, 575/2300 RPM, DC
2 Head & Table Drive Motors 40 hp, AC, foot mounted traverse motors
2 Lubricating Pump Motors ½ hp, AC,
1 Quill Adjust Motor 3 hp, 1150/2300 RPM, DC, 65/2300 FPM
1 Coolant Pump Motor 2 hp
1 Table Clamp Motor 15 ft. lb., 1800 RPM, Shell type

Electrics:
• 230 volts, DC
• 440 volts, AC
• The DC motors receive DC power from a 900 kW MG Set driven by a 150 hp motor

Machine controls:
• The machine is primarily controlled via a portable pendant with the following :
1. Start and stop drive motor
2. Start, stop, reverse, jog, feed, fast feed and traverse table
3. Clamp table
4. Start, stop, reverse, jog, feed, fast feed and traverse bed
• The control cabinet mounted on the operators platform contains the following:
-Hand operated rheostats for increasing or decreasing the feed rates
-Stop and start buttons for chip conveyor, coolant pump motor and lube pump motor.

Coolant

Chip Conveyor

Net weight - 330,000 lbs


(2) Hydraulic Clamping Fixtures:
• Fixtures consists of two complete clamping units, each unit including a housing, clamping rail and supporting brackets.
• Adjustable Clamping Rail – to clamp various die block widths
• Housing is located on the table in one of two positions; one for blocks from 14" to 27" thick, and a second for blocks 27" to 40" thick
• Each fixture is equipped with pendant operated through push buttons and selector switches
Capacity – the fixture is adjustable for holding the following sizes of die blocks:
-Thickness – 14" – 40"
-Width – 36" – 90"
-Length – 58" – 21-1/2 ft.
-Electrics – 440 volt, 3 phase, 60 cycle, AC as follows:
-(1) 7-1/2" HP AC motor for adjusting crossrail
-(1) 5 HP AC motor for driving the hydraulic pump motor
-Weight – estimated weight of each fixture and its parts is 140,000 lbs
-Magnetic Clamping on each fixture as follows:
-Fixture 1 – Sundstrand magnetic Control, 480 v AC - 244 DC
-Fixture 2 – Neutrofier II Magnetic Control, 280/400 AC – 244 DC
-72" x 10" Magnetic face on each fixture
-Travel:
-Vertical travel – 64"
-Hydraulic Unit:
-Vickers

Note:
Maximum recommended weight on table is 740,000 lbs. If one fixture is used then reduce by 140,000 lbs. If two fixtures are used then reduce by 280,000 lbs.

The machine was originally designed to perform general face milling operations on die blocks.

It is currently installed under power at a NorthEast USA plant where it may be inspected on request.

We will sell the Clamping Units separately.
 
Price  
  US   request
120999983 107

TRUMPF TruPunch 5000 - 1600 FMC for sale
Punching Machines


Year of construction: 2006 Hours of operation machine: 35.281 h (20.09.2017) Work area: 3050 x 1550 mm Control: Siemens Sinumerik 840 D Max sheet thickness approx.: 8 mm Space requirement approx.: 7600 x 7000 mm App ...
used machine
 
Year of construction: 2006
Hours of operation machine: 35.281 h (20.09.2017)
Work area: 3050 x 1550 mm
Control: Siemens Sinumerik 840 D Max sheet thickness approx.: 8 mm
Space requirement approx.: 7600 x 7000 mm
Approximate weight machine: 17,300 kg
Power consumption: 29 kVA

Standard equipment
-Stable, easily accessible C-frame
-Coordinate guide with integrated linear magazine, 25 places for tools and clamps
-4 clamps
-Automatic part slide 500 x 500 mm

Punching head
-Hydraulic Mono - tool holder 360 ° rotation
for all tools, automatic tool length compensation, tool lubrication
-2 lubricant containers, programmable stripper motion, punching slug extraction
-Programmable presser to set up with a low locking force

Control
-Open based Sinumerik 840 d control system
-10.4 "TFT color display
-Diagnosis function
-Graphics programming ToPs 2000
-Integrated 3.5 "-floppy"
-RJ45 network connector

Security
-CE marking
-Multi-beam photoelectric
-Emergency shut-down hydraulic
-Bulge detection

Advanced cutting equipment
-Function multi tool
-Function Multibend
-Function thread forming
-Adaptive stroke calibration
-ASC (advanced control stripper)

Advanced machine equipment
-4 x single to öffnede clamps
-Sensor for slide of part of
-Vibration-damped installation
-Designation cylinder
-Automatic switch-off
-Conveyors
-Blowing device for small parts

Automation

SheetMaster (3000 x 1500 mm)
-Magnet cleaner
-Vakuumsensorik
-Central lubrication
-Plate thickness gauge for double sheet control
-Magnet system
-Cleaner plate module

TrumaTool 40
-TrumaTool upgrade main time parallel

SortMaster R4
-incl. 4 container
2006
Price  
    request
120973050 104

GEIBEL + HOTZ FS 40 Primus SE for sale
Flat Grinding Machines


Grinding length 400 mm Grinding width 200 mm Cross movement 200 mm Table speed approx. 2 - 28 m/min stepless Grinding wheel dimensions 225 x 25 x 51 mm Grinding wheel speed 2800 RPM. Accessories electric magnet ...
used machine
 
Grinding length 400 mm
Grinding width 200 mm
Cross movement 200 mm
Table speed approx. 2 - 28 m/min stepless
Grinding wheel dimensions 225 x 25 x 51 mm
Grinding wheel speed 2800 RPM.

Accessories electric magnetic clamping plate 400 x 200 mm
1994
Price  
    request
120959571 104

ALPA RT 550 / D for sale
GRINDING


GRINDING ALPA RT 550 / D USED It is among the proposals of machine tools used for the adjustments and between ADJUSTMENTS used we find the GRINDING ALPA RT 550 / D USED The GRINDING ALPA RT 550 / D USED comes in excl ...
used machine
 
GRINDING ALPA RT 550 / D USED It is among the proposals of machine tools used for the adjustments and between ADJUSTMENTS used we find the GRINDING ALPA RT 550 / D USED
The GRINDING ALPA RT 550 / D USED comes in exclusive offer for the industrialbay.it users.

Industrialbay deals with the sale of machine tools used for the adjustments , the ADJUSTMENTS used.

Are you looking for a machine tool for the adjustments ? In the category adjustments you will find used surface grinder you are looking for

Some technical features of GRINDING ALPA RT 550 / USED D are:
YEAR: 1977
Working capacity - L x W x H max.1200 x 600 x 550 mm?
V-axis stroke 630 mm
Axis Travel Y 350 mm
Z-axis stroke 350 mm
Grinding wheel dimensions (diameter - width) 300 x 50 mm
Grinding wheel speed 1500 r / min
Mola Power 5 hp
Size magnetic chuck 500 x 300 mm
table dimension 550x300
Weight 2300 kg
1977
Price  
  IT   request
120919189 101

GROTEFELD 7LG4S-7-051 for sale
Drilling And Boring Machines


1 piece is offered: Grotefeld drilling unit, drill with pneumatic feed Make: Grotefeld Type: 7LG4S-7-051 mint condition, tested, ready for use 2 units available Features: Engine power: 1.1 KW Spee ...
used machine
 
1 piece is offered:

Grotefeld drilling unit, drill with pneumatic feed

Make: Grotefeld

Type: 7LG4S-7-051

mint condition, tested, ready for use

2 units available

Features:

Engine power: 1.1 KW

Speed: Engine 1350 min-1 gearbox reduction ratio 1: 1.6

Stroke: 80 mm

Collet Chuck: He 25-16 mm

Oil hydraulic brake, Fabr. Hunger

Cylinder equipped with magnetic piston

Cam bar with switches

Lower speeds can be set in a drilling operation.

Shipping:

free shipped from stock

-for shipping costs within Germany and around the world please contact us

-Picking up local
 
690 €  
    request
120876622 1001  

Tilting tables, mech. 12.25 x 4.25 m + 12.90 x 4.25 m


2 gebr. mechanical tilting tables including the sound system + 50 magnets "BT Innovation" Table 1: Scarf size: 12.25 x 4.25 m incl. one-sided cultivation 25 cm With longitudinal formwork profil ...

 

2 gebr. mechanical tilting tables

including the sound system + 50 magnets "BT Innovation"


Table 1:

Scarf size: 12.25 x 4.25 m

incl. one-sided cultivation 25 cm
With longitudinal formwork profile 200 x 100
Scarf width: 4.10 m
8 PCs. Shaker

Table 2:

Scarf size: 12.90 x 4.25 m

incl. two-sided growing 65 cm
With longitudinal formwork profile 200 x 10 on 12.10 m
Scarf width: 4.15 m
8 PCs. Shaker

The sound system "BT Innovation"
=
About 50 magnets

Approximately 98 m off sound profiles
=

 
Price  
  DE   request
120652695 103

NICOLAS CORREA FP-30/40 for sale
CNC Portal Milling Machines


Manufacturer: Nicolas Correa Model: FP-30/40 Year: 2000 Location: UK Category: Milling Machine Product id: 1213 Heidenhain control CNC Table size 4000 x 1250 mm Max weight on table 10000 kg X / Y / Z 3500/18 ...
used machine
 
Manufacturer: Nicolas Correa
Model: FP-30/40
Year: 2000
Location: UK
Category: Milling Machine
Product id: 1213

Heidenhain control CNC
Table size 4000 x 1250 mm
Max weight on table 10000 kg
X / Y / Z 3500/1800/800 mm
Distance between columns 1740 mm
T-slots 8 x 22
Distance between T-slots 150 mm
Spindle taper ISO 40
Spindle power 30 kW
Spindle speeds ~ 12000 rpm
Rapids X / Y / Z 15000/12000/12000 mm / min
Feed range 7500 mm / min
24 ATC

High pressure through spindle coolant
New spindle December 2016
2 off magnetic chucks 2200 x 1500 mm 1 off subplate 1000 mm length
Results of ball bar test available

UNDER POWER FOR YOUR CHECKING
2000
Price  
  GE   request
120190781 1300

BURKLE(GERMANY) PPGI for sale
COIL COLOR COATING LINE


COLOR COATING LINE (sheet to sheet type) (PCM EQUIPMENT) PCM(Pre-Coated Metal) EQUIPMENT Make: Korea/Germany Manufacturing year: 2005 Stopped year: 2015 Flow Coater: Burkle (Germany) Far-Infrared R ...
used machine
 
COLOR COATING LINE
(sheet to sheet type)

(PCM EQUIPMENT)

PCM(Pre-Coated Metal) EQUIPMENT

Make: Korea/Germany

Manufacturing year: 2005

Stopped year: 2015

Flow Coater: Burkle (Germany)

Far-Infrared Radiation Heater: Elstein (Germany)



Product: Texture, Metallic, Embossing, Pearl Clear

Color Steel Plate for Home electronic appliance

(TV, Refrigerator, Washing machine, etc.)

Type: Sheet to sheet

Line speed: 32m/min

Production Capacity: 2400ton/month

Material: EG, CR, GI, etc.

Sheet thickness: 0.4~1.0mm

Sheet width: 300~1219mm

Sheet length: 600~4500mm



Equipment Specification

1) Sheet input equipment (Parallel type)

Input lift 2 units

Absorption input machine 2 units

Magnetic conveyor 1 unit

2) Pre treatment equipment:

Degreasing and water cleaning equipment by spray

STS booth: 3600 2units, 4000 3units

STS liquid tank 3M³ 6units

FRP pump 7.5Hp 6units

Nozzel, Squeeze roll 6units

Conveyor and motors



3) Roll coater 5units

Usage: Coating and Pre chrome coating

- 3 roll type 34m/min, 3Hp cyclone motor drive

- Back face post-treatment coater 1unit

- Back face water paint coater 1unit

- Back face oil paint coater 1unit

Front face post-treatment coater 1unit

Under coater 1unit

4) Flow coater 2units

Usage: Under coating, top coating, clear coating

Pouring head, Drive(2Hp), Pump(German make Burkle)

Tank, filter, Conveying belt

5) Dryer (Oven) 3units

Type: Electric heater dry

Oven case, Ceramic heater, SCR, Chain conveyor

VOC exhaust duct

Back face dry oven 1unit

Under coating oven 1unit

Top coating oven 1unit

6) Cooling system

Air cooling type 1unit

Water cooling type 1unit

7) Film attaching machine 1unit

Protective film

8) Down conveyor

9) Moving slope conveyor

10) Gang slitter 2units

Usage: Slitting according to the user’s demand

11) Auto loading piler 2units

12) Boiler 1.5ton

Steam boiler (fuel: Gas)

13) Main Panels, Operation Panels





< FLOW CHART >



Sheet input

Pre-treatment

Back face post-treatment coating

Water paint back face coating

Oil paint back face coating

Back face oven dry

Post-treatment coating

Under coating

First flow coating

Under oven

Second flow coating

Top oven dry

Cooling

Film attaching

First Cutting

Second Cutting

Inspection and loading


BMJ KOREA CO.,LTD
DIRECTOR:JONGDUK
E-MAIL:paekJs1961@gmail.com
MOBILE)+82-10-7499-2567

2005
Price  
  KR   request
120190778 1200

BURKLE(GERMANY) color coating line for sale
ppgi


COLOR COATING LINE (sheet to sheet type) (PCM EQUIPMENT) PCM(Pre-Coated Metal) EQUIPMENT Make: Korea/Germany Manufacturing year: 2005 Stopped year: 2015 Flow Coater: Burkle (Germany) Far-Infrared R ...
used machine
 
COLOR COATING LINE
(sheet to sheet type)

(PCM EQUIPMENT)

PCM(Pre-Coated Metal) EQUIPMENT

Make: Korea/Germany

Manufacturing year: 2005

Stopped year: 2015

Flow Coater: Burkle (Germany)

Far-Infrared Radiation Heater: Elstein (Germany)



Product: Texture, Metallic, Embossing, Pearl Clear

Color Steel Plate for Home electronic appliance

(TV, Refrigerator, Washing machine, etc.)

Type: Sheet to sheet

Line speed: 32m/min

Production Capacity: 2400ton/month

Material: EG, CR, GI, etc.

Sheet thickness: 0.4~1.0mm

Sheet width: 300~1219mm

Sheet length: 600~4500mm



Equipment Specification

1) Sheet input equipment (Parallel type)

Input lift 2 units

Absorption input machine 2 units

Magnetic conveyor 1 unit

2) Pre treatment equipment:

Degreasing and water cleaning equipment by spray

STS booth: 3600 2units, 4000 3units

STS liquid tank 3M³ 6units

FRP pump 7.5Hp 6units

Nozzel, Squeeze roll 6units

Conveyor and motors



3) Roll coater 5units

Usage: Coating and Pre chrome coating

- 3 roll type 34m/min, 3Hp cyclone motor drive

- Back face post-treatment coater 1unit

- Back face water paint coater 1unit

- Back face oil paint coater 1unit

Front face post-treatment coater 1unit

Under coater 1unit

4) Flow coater 2units

Usage: Under coating, top coating, clear coating

Pouring head, Drive(2Hp), Pump(German make Burkle)

Tank, filter, Conveying belt

5) Dryer (Oven) 3units

Type: Electric heater dry

Oven case, Ceramic heater, SCR, Chain conveyor

VOC exhaust duct

Back face dry oven 1unit

Under coating oven 1unit

Top coating oven 1unit

6) Cooling system

Air cooling type 1unit

Water cooling type 1unit

7) Film attaching machine 1unit

Protective film

8) Down conveyor

9) Moving slope conveyor

10) Gang slitter 2units

Usage: Slitting according to the user’s demand

11) Auto loading piler 2units

12) Boiler 1.5ton

Steam boiler (fuel: Gas)

13) Main Panels, Operation Panels





< FLOW CHART >



Sheet input

Pre-treatment

Back face post-treatment coating

Water paint back face coating

Oil paint back face coating

Back face oven dry

Post-treatment coating

Under coating

First flow coating

Under oven

Second flow coating

Top oven dry

Cooling

Film attaching

First Cutting

Second Cutting

Inspection and loading


BMJ KOREA CO.,LTD
DIRECTOR:JONGDUK
E-MAIL:paekJs1961@gmail.com
MOBILE)+82-10-7499-2567

2005
Price  
  KR   request
120190747 104

DELTA LC - 500 for sale
Rotary Table Surface Grinding Machines, Vertical Grinding Sp


VERTICAL - ROTARY TABLE - FLAT GRINDING MACHINE DELTA LC - 500 WITHOUT - 14-10-052 Shipping time: immediately Number: 14-10-052 Manufacturer: DELTA Type: LC - 500 MACHINE DATA Year of production: around 1 ...
used machine
 
VERTICAL - ROTARY TABLE - FLAT GRINDING MACHINE DELTA LC - 500 WITHOUT - 14-10-052

Shipping time: immediately

Number: 14-10-052

Manufacturer: DELTA
Type: LC - 500

MACHINE DATA
Year of production: around 1995
L x W x h: approx. 800 x 800 x 1800 mm
Weight: approx. 400 kg

Very good condition - without

TECHNICAL DATA
Control: conventional

Loop scope:
Grinding diameter: approx. Ã? 500 mm
Grinding height: approx. 220 mm

Magnetic clamping surface: approx. Ã? 500 mm

Grinding spindle:
Grinding wheel dimensions: approx. Ã? 200 x 80 x 78 mm
Grinding spindle - speed: approximately 2840 RPM
Power: approx. 3,0 kW

Powered rotary table: 30 & 60 RPM

Z - delivery: manual
Grinding movement: manual

ACCESSORIES
â?¢ Permanent - magnet
â?¢ Wet grinding device
â?¢ Machine housing
â?¢ Operating instructions
â?¢ Grinding wheels - protection
â?¢ Cup grinding wheel
â?¢ Various wrenches

Other accessories on request
Price and other specifications on request
1995
Price  
  DE   request
120190742 209

WILLIBALD MZA 3500 S for sale
Wood crushing machines


-Machine in stock -Reinforced Version -The performance of 180 m3/h Technical data -Magnetic Separator -Main engine 6 cylinder MAN -Engine power 420 KM -Liquid-cooled engine Throat size: -width: 125 cm - ...

 
-Machine in stock
-Reinforced Version
-The performance of 180 m3/h

Technical data

-Magnetic Separator
-Main engine 6 cylinder MAN
-Engine power 420 KM
-Liquid-cooled engine

Throat size:

-width: 125 cm
-height 60 cm
-infeed length 400 cm

-2 combat stretching-the first toothed working hydraulics
diameter 50 cm

-Rotor Diameter 60 cm
-Number of beaters 48
-Mileage r?baka 4662 h
– three rows against the blades last regulated hydraulics

-road lighting
-air brakes
-wood chipper on the two axes
-hook with the approved
 
Price  
  PL   request
120190739 104

DELTA LC - 500 for sale
Rotary Table Surface Grinding Machines, Vertical Grinding Sp


VERTICAL - ROTARY TABLE - FLAT GRINDING MACHINE DELTA LC - 500 - 14-10-051 Shipping time: immediately Number: 14-10-051 Manufacturer: DELTA Type: LC - 500 MACHINE DATA Year of production: around 1995 L x W ...
used machine
 
VERTICAL - ROTARY TABLE - FLAT GRINDING MACHINE DELTA LC - 500 - 14-10-051

Shipping time: immediately

Number: 14-10-051

Manufacturer: DELTA
Type: LC - 500

MACHINE DATA
Year of production: around 1995
L x W x h: approx. 800 x 800 x 1800 mm
Weight: approx. 400 kg

Very good condition

TECHNICAL DATA
Control: conventional

Loop scope:
Grinding diameter: approx. Ã? 500 mm
Grinding height: approx. 220 mm
Magnetic clamping surface: approx. Ã? 500 mm

Grinding spindle:
Grinding wheel dimensions: approx. Ã? 200 x 80 x 78 mm
Grinding spindle - speed: approximately 2840 RPM
Power: approx. 3,0 kW

Powered rotary table: 30 & 60 RPM

Z - delivery: manual
Grinding movement: manual

ACCESSORIES
â?¢ Permanent - magnet
â?¢ Wet grinding device
â?¢ Machine housing
â?¢ Operating instructions
â?¢ Grinding wheels - protection
â?¢ Cup grinding wheel
â?¢ Various wrenches

Other accessories on request
Price and other specifications on request
1995
Price  
  DE   request
120182719 104

PROTH PSGS 3060AH for sale
Surface Grinding Machines


Surface grinding machine, make: MANOJ Type: PSGS 3060AH Table size: 300 x 600 mm; Magnetic disk: 340 x 700 mm Travel max: 300 x 700 mm Workpiece weight max: 250-320 kg Height of magnetic disk / disc: 422 mm Separat ...
used machine
 
Surface grinding machine, make: MANOJ
Type: PSGS 3060AH
Table size: 300 x 600 mm; Magnetic disk: 340 x 700 mm
Travel max: 300 x 700 mm
Workpiece weight max: 250-320 kg
Height of magnetic disk / disc: 422 mm
Separate hydraulic equipment - therefore no vibration transmission to the machine!
 
Price  
  DE   request
119931812 401

KHS INNOFILL DVF 84/9SV 7.000 bph in 5 L PET,year 2006 for sale
Filler Monoblock for 5 liter PET Bottles


Filler Monoblock for 5 liter PET bottles KHS Innofill DVF 84/9SV PET This volumetric PET bottler filler was manufactured by KHS in 2006 and it has been used for filling beer in 5 liter PET bottles and it is suitable a ...
used machine
 
Filler Monoblock for 5 liter PET bottles KHS Innofill DVF 84/9SV PET

This volumetric PET bottler filler was manufactured by KHS in 2006 and it has been used for filling beer in 5 liter PET bottles and it is suitable also for filling CSD. This filler has capacity of 7000 x 5 liter PET bottles beer in an hour and it has been used very limited hours, around 10 000 hours only and it is in excellent condition. The filler comes with full bottle inspection system.

Technical data
Manufactured by KHS in 2006
Monobloc capacity 7 000 x 5 liter PET / hour
PET bottle used 5 liter with PCO 34 mm closure
Filler type KHS Innofill DVF 84/9SV PET with 84 filling valves
Rinser KHS Innoclean FR-ZMV 30/60 PET with 30 rinsing position
Cap closing unit KHS 9 stations 34 mm screw cap
Cap loading unit Magnettechnik Corkmaster
Filling Inspector METEC P4000, FMS-R(UF)
2006
Price  
  FI   request
118762387 401

KHS GMBH compete bottle filling line for sale
PET Bottle Filling Line KHS 30.000 bph


PET bottle Filling Line KHS 15 750 - 30 000 bph This complete beer filling line was delivered by KHS in year 2005 and it is still installed and in very good condition. This line is complete from preform feeding equipm ...
used machine
 
PET bottle Filling Line KHS 15 750 - 30 000 bph

This complete beer filling line was delivered by KHS in year 2005 and it is still installed and in very good condition. This line is complete from preform feeding equipment to delivery package palletizing. Originally this line was designed to fill from 0.5, 1.5 to 2.0 liter PET bottles with max 6 gram / liter CO2 and max + 16 C degree product temperature. In 2006 it was modified for 2.5 liter with adding a new labeler. Line is available for immediate relocation

Main characteristics of this line:
Manufacturer: KHS GmbH
Operation started in: year 2006
Total working hours: approx 27 000
Condition: Operation stopped in September 2014, installed
Effective capacity: 30 000 bph in 0.5 L PET
22 000 bph in 1.5 L PET
15 750 bph in 2.0 L PET
Neck standard: PCO 28 mm
Delivery packs 2.0 -2.5 L PET in 2 x 3 tray and shrink plastic
1.5 L PET in 3 x 3 tray and shrink plastic
1,5 L PET in 3 x 3 only shrink plastic
Labeling: Paper label, cold glue, front and neck
Plastic label, hot glue, front
Products used for: Beer
Control PLC Siemens Simatic S 7 / ET 200
Line suitable with mixer for: Carbonated and non carbonated drinks

Videos of this line:

Blomax: abcs://youtu.be/igj3F_vZc8U
General introduction: abcs://youtu.be/r1zhaBVF7Bg

List of equipment
Item 1: Stretch blow molding machine SIG Blomax 14, serie III
Nominal capacity 32000 bph in 0.5 liter and 17 500 in 2.0 liter
Max bottle height is 380 mm, max diameter 108 mm
Serie III is equipment with Airback / Air recycling system
Complete preform feeding system by Tanner with safety fence
Riedel Cooler for the blow molder equipment with R407C Freon + radiator cooler

Item 2: PET Compressor Ateliers Francois 2100 Nm3/h
Compressor is 3-stage, intercooled GE68B, 480 rpm, 350 kW
Air dryer and 40 bar galvanized air receiver 1 m3
Radiator type water-air cooler for compressor cooling

Item 3: KHS Air-conveyor system Innoline LTR
Automatic size adjustment- suitable for 49-108 mm diameter bottles

Item 4: Filler Block with
Rinser KHS Innorins PET-FR-ZM 80/36
This is a mechanical rinser with a two-channel working for pre-rinsing
with water or disinfectant. Final rinsing with water. 80 rinsing stations and 2880 mm rinser diamer.

Filler - Capper KHS Innofill DRF PET 120 SC 10/36
The Innofill DRF PET is a computer-controlled, PET bottle filler that uses probes integrated into the filling tubes to determine fill levels. The filler has 120 filling nozzles and 10 capping stations for PCO 28 caps. NSM Magnettechnic cap feeding system.

Item 5: Filling Control Station Heuft Basic BA R20 with X-ray, capacity 25 000 bph

Item 6: Full bottle conveyor system Innoline BTR with automatic lubrication system

Item 7: Labeling machine Innoket ROLAND KH 20/5 II, capacity 4000 - 32000 labels/h
This Roland labelers has 20 bottle turrets and 2 labeling stations with 5-finger drums for label application. Paper labels, cold glue system.

A feedscrew spaces the containers before they are channeled into the rotating machine
by an infeed star. Hot glue is evenly distributed, thin film of glue on the gluing segments picks up labels from the stationary magazine. The individually spring loaded fingers of the gripper drum grasp the glued labels and apply them in the exact position on the containers.

Item 8: Laser Marking system Coder Allmark AL 882 APS

Item 9: Label Inspector Heuft Basic BA R20 with X-ray

Item 10: Labeling Machine Krones Contirol K-745-L17, year 2006
Plastic labels, hot glue system, 2 rolls with automatic switch over
Capacity 15 000 - 17 000 bph with 2.5 liter PER

Item 11: Tray Shrink Packer KHS TSP 35-700, year 2007
Capacity up to 35 cycles per minute

Item 12: Tray conveyors KHS Innoline GTR with automatic lubrication system

Item 13: Label Inserter Metec on delivery packs

Item 14: Palletizer KHS Innopal PB 1/2 N2 capacity 27 000 bph in 1.5 Liter
Double line palletizer suitable for 800x1000 and 1000x1200 cm pallets
Pallet magazine KHS MPH
Carton layer inserter robot
KHS PTR pallet conveyors
KUKA / Siemens PLC controls

Item 15: Pallet Stretch Wrapper Robopac Helix HS 40
Siemens Simatic S 7 PLC contols

Item 16: Pallet lift KHS Lord Pac with a pallet coder
2006
Price  
  FI   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter