View details
die magnetprofis WF1500+4000 Single shaft shredders
New machineVerified seller
Request price
Directly to the seller
1 / 4
Technical data
· ID 163997594Single shaft shredders
- Condition
- New machine
- Year of manufacture
- 2023
- Location
- 86424 Dinkelscherben
Identifikation
Manufacturerdie magnetprofis
ModelWF1500+4000
Technik
Quantity1
Description
Aluminium angled conveyor belt with substructure
incl. adjustable feet as well as machine feet for levelling unevenness
horizontal area: 1,500mm
Rising Area: 4,000mm
Angle of inclination in bend 45°
Discharge height: 3,000mm
Height of horizontal: 200mm
Execution:
Aluminum construction
- 2-fold profile reinforced 90x45mm
Drive roller + deflection roller S235 steel welded and machined
Ø100x420mm convex overtightened, shaft fixed with tension bearings.
Propulsion: Slip-on geared motor 0.55KW, speed 0.3m/sec
Connection 230/400V, 50Hz IP54 protection
Drive ready for connection up to motor terminal box
(Commissioning must be carried out by a qualified electrician)
PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge PU petrol matt
Conveyor belt width: 400mm
2 pcs. corrugated edges 50 high, 35mm wide, high-frequency welded
28 T-40 cleats, approx. 400mm pitch
Belt material: 2-ply particularly transversely stable
In the bending area, the belt is guided on both sides with 3 hold-down rollers.
The belt is designed with a border-free zone of 70mm on both sides.
Due to the corrugated edge on both sides, the useful width of the conveyor belt is reduced:
Usable width: 200mm, results as follows:
(top view) Transverse arrangement 70+35+190+35+70mm
Accessories: Aluminum construction for hanging the overbelt magnetic separator below
Permanent Overbelt Magnetic Separator
TYPE PEM1200
1200 x 550 x 200mm
=========================
4x eyebolt for suspension
Drive roller + deflection roller S235 steel welded and machined
Ø150x300mm convex overtightened, shaft fixed with tension bearings.
Two-hole flange bearing UCFL with grease nipple, sealed bearing cage
Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec
Connection 400V, 50Hz IP54 protection
Drive ready for connection up to motor terminal box
(Commissioning must be carried out by a qualified electrician)
PU conveyor belt endless GB30 black matt
7 x T20 cleats high-frequency welded
High-quality 3-fold aluminum construction
2 side mudguards V4A
Magnet dimensions: 700x230x120mm
magnetic core encased in soft iron, so that a
very high permeability can be guaranteed.
Underbody tightly closed and sealed with stainless steel plate and pole shoes.
incl. adjustable feet as well as machine feet for levelling unevenness
horizontal area: 1,500mm
Rising Area: 4,000mm
Angle of inclination in bend 45°
Discharge height: 3,000mm
Height of horizontal: 200mm
Execution:
Aluminum construction
- 2-fold profile reinforced 90x45mm
Drive roller + deflection roller S235 steel welded and machined
Ø100x420mm convex overtightened, shaft fixed with tension bearings.
Propulsion: Slip-on geared motor 0.55KW, speed 0.3m/sec
Connection 230/400V, 50Hz IP54 protection
Drive ready for connection up to motor terminal box
(Commissioning must be carried out by a qualified electrician)
PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge PU petrol matt
Conveyor belt width: 400mm
2 pcs. corrugated edges 50 high, 35mm wide, high-frequency welded
28 T-40 cleats, approx. 400mm pitch
Belt material: 2-ply particularly transversely stable
In the bending area, the belt is guided on both sides with 3 hold-down rollers.
The belt is designed with a border-free zone of 70mm on both sides.
Due to the corrugated edge on both sides, the useful width of the conveyor belt is reduced:
Usable width: 200mm, results as follows:
(top view) Transverse arrangement 70+35+190+35+70mm
Accessories: Aluminum construction for hanging the overbelt magnetic separator below
Permanent Overbelt Magnetic Separator
TYPE PEM1200
1200 x 550 x 200mm
=========================
4x eyebolt for suspension
Drive roller + deflection roller S235 steel welded and machined
Ø150x300mm convex overtightened, shaft fixed with tension bearings.
Two-hole flange bearing UCFL with grease nipple, sealed bearing cage
Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec
Connection 400V, 50Hz IP54 protection
Drive ready for connection up to motor terminal box
(Commissioning must be carried out by a qualified electrician)
PU conveyor belt endless GB30 black matt
7 x T20 cleats high-frequency welded
High-quality 3-fold aluminum construction
2 side mudguards V4A
Magnet dimensions: 700x230x120mm
magnetic core encased in soft iron, so that a
very high permeability can be guaranteed.
Underbody tightly closed and sealed with stainless steel plate and pole shoes.
Inquire about this machine
Your inquiry goes directly to the seller of this machine.
