134,821 used machines on RESALE, but how to find them? Machine Search
Height=1.26 m, Overall length= 0.5 m, Overall width= 1.7 m, Net weight= 120 kg,
A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible.
Load capacity: 1600kg, load center: 500mm, motor power: 26kW, travel speed: 20km/h, gradeability: 37%, turning radius: 2000mm, lift height: approx. 4500mm, overall height: approx. 2150mm, weight: approx. 2900kg. The machine requires a new battery. An on-site inspection is possible.
Height=1.8 m, Overall length= 1.9 m, Overall width= 0.85 m, Net weight= 640 kg,
Kodak Trndsetter Q800 with developer year 2016. Model TJ1903 developer EL125T In production X speed, 42 plates per hour software
Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 E5931468 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons
A vertical form fill and seal packaging machine Goglio for bulk materials including a vibrating chute scale with two chutes is available. Weighing range min./max.: 300g/3000g, accuracy: +/-0.3%, load cell type: HBM PW2 C3/18, max. load: 18kg, scale type: GL 111, packaging dimensions for 1000g: 130mm/80mm/400mm. Machine dimensions X/Y/Z: approx. 2300mm/3000mm/3500mm, weight: approx. 2800kg, control: IBM 7542 industrial computer. The machine is defective. Documentation available. An on-site inspection is possible.
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg
KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (May 2022) with only 1296 laser hours 2400 dpi Z-Speed Panel counter: 258861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from right to left with Prinergy TIFF Shooter Dell PowerEdge 7330 Plate development machine built in 206 Year of Make: 2006
KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (08/2022) with only 2615 laser hours 2400 dpi Z-Speed Panel counter: 395443 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Prinergy TIFF Shooter Year of Make: 2016 New TH 7 laser (08/2022) with only 2615 laser hours
A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.
This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...
Lift height: 3680mm, free lift: 160mm, load capacity: 5000kg, load center: 500mm, sideshift carriage: 1310mm, sideshift: +/-100mm, fork length: 1600mm, cross section: 130mm/60mm, battery weight: approx. 2200kg. Machine dimensions Y/Z: approx. 1400mm/3700mm, operating hours: approx. 3416h. Documentation available. An inspection on site is possible.
A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.
Transnorm Rising falling Incline with forerun belt conveyor GF 6000+800-600-500 RA2449 Technical data: Conveyor length (NL): 6800 mm (800 mm forerun + 6000 mm incline) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...
weight max. in kg: 2000 kg stroke: 3,3 mm fork length: 1200 mm battery: 48V / 575Ah weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1,2 x 3,5 x 2,19 m Electric forklift with charger. Only 2500 operating hours New battery in 2017 3.3-meter duplex mast 2000 kg lifting capacity 2.19-meter clearance height With side shift and fork adjustment Very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.
Transnorm Rising falling Incline with arch and forerun belt conveyor 1000+10700+1000-600-500 RA2459 Technical data: Conveyor length (NL): 12700 mm (1000 mm forerun + 10700 mm incline + 1000 mm arch ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12700 ( 1000 + 10700 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...
A horizontal flow pack packaging machine (tubular bag machine) SKS is available. Packaging capacity: 30-120 packages/min, film roll width: 220mm-500mm, bag length range: 120mm-500mm, bag width range: 60mm-200mm, bag height range: 5mm-80mm. Machine dimensions X/Y/Z: approx. 4500mm/1150mm/1600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.
Load capacity: 1800kg, drive wheels: single, rated power: 42kW, lift height: 3290mm, load center: 500mm, mast model: 5V15C33, operating hours: approx. 1116h. Documentation available. An on-site inspection is possible.
STILL electric forklift mod. R50/15 3-wheel – CE compliant – used with new V24 battery - Flow q.li 15 - Sideshift - Riser mm. 3500 - Battery with 1800H - Complete with charger - COMPLETE WITH MANUAL AND CE DECLARATION
Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between table and slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons
A homemade tractor for logging, a motor from a Belaruss tractor, a bridge from the Urals. HIAB 100 lift, controlled from the cab. Everything works, starts, goes. We sell inexpensively, offer a price.
A used BECK flow wrapping machine Serienpacker is offered. Fully automatic film packaging machine with 4-side sealing principle, operates with two flat film rolls upper and lower film, processing films PE, PP, polyolefin. Inspection by appointment possible.
Capacity 7.25T /16000lbs Stroke 1727 mm weight 270t
Capacity 5.4T /12000 lbs Stroke 1626 mm weight 150t
Capacity 2.7T /6000 lbs. Stroke 1403 mm weight 77.5t
Forklift hydraulic/manual operations, max load wight 600 kg
Formwork tables/pallets Various formwork tables in different lengths Built in 1995 Very clean condition Location Göttingen Price: Freely loaded p. piece 3,000,-- euros + Added value. I offer as an intermediary on behalf of the owner. The information is non-binding, the prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)
LASCO FP 222 S hydraulic press was built in Germany by Lasco Umformtechnik GmbH. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO FP 222 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex components used in the broadly defined automotive or machinery industry. Its main application is hot and cold forging. The use of a die cushio in the lower work table and the large slider stroke means that the machine can also be used as a deep drawing press. All machining processes are performed with a high press force of up to 200 tonnes, which, combined with the highly dynamic slider, guarantees the b ...
used pastry forming roller Kalmeijer KGM Kipferl 1380-910BProduct descriptionManufacturer: KalmeijerType: KipferlNr.: 1380-910Bowant: usedDough figure:Dimension: 40x34 mmThickness: 7.5 mmWeight: 6 grRoller width: 250 mmDetails see pictures.
used pastry forming roller Kalmeijer KGM Pretzel Small 1383-912AProduct descriptionManufacturer: KalmeijerType: Pretzel KleinNo.: 1383-912AZstand: usedDough figure:Dimension: 55 mmThickness: 4 mmWeight: 7 grRoller width: 250 mmDetails see pictures.
Kalmeijer Pastry Forming Roller KGM Flowers 1612-900BProduct descriptionManufacturer: KalmeijerType: FlowersNo.: 1612-900Bowant: usedPastry figure:Dimension: 55 mmThickness: 5.5 mmWeight: 15 grRoller width: 250 mmDetails see pictures.
Kalmeijer Pastry Forming Roller KGM German Männchen 1502-930BProduct descriptionManufacturer: KalmeijerType: German MännchenNr.: 1502-930Bowant: usedDough figure:Dimension: 82x33 mmThickness: 2.5 mmWeight: 8 grRoller width: 250 mmDetails see pictures.
Kalmeijer pastry forming roller KGM Taler small 1120-910AProduct descriptionManufacturer: KalmeijerType: Taler smallNo.: 1120-910AZstand: usedPastry figure:Dimension: 55 mmThickness: 4 mmWeight: 13 grRoller width: 250 mmDetails see pictures.
Kalmeijer Pastry Forming Roller KGM Nut Sticks 1263-930BProduct DescriptionManufacturer: KalmeijerType: Nut SticksNo.: 1263-930Bowant: UsedDough Figure:Dimensions: 77 x 25 mmThickness: 3.5 mmWeight: 11 grRoller Width: 250 mmDetails see pictures.
Kalmeijer Pastry Forming Roller KGM Kipferl 1380-910BProduct descriptionManufacturer: KalmeijerType: KipferlNr.: 1380-910Bowant: usedDough figure:Dimension: 40x34 mmThickness: 7.5 mmWeight: 6 grRoller width: 250 mmDetails see pictures.
Pastry forming machine Janssen FM 128 Product description Manufacturer: Janssen &, Sohn Type: FM 128 / K4 A Year of construction: 1979 Condition: used, functional, bakery condition Working width: 250 mm Incl. forming rollers (s.b.) Mobile undercarriage connection: 220 / 380 V See pictures for details.
Product description: Manufacturer: Kalmeijer Type: Kalmeijer KSM The thickness of the dough figures is adjustable. Dough hopper, forming roller and dough feed roller are easily removable for cleaning. Easy to use The conveyor belts for the trays can be folded in and out. The machine takes up little space. The machine is on castors and therefore mobile. Dimensions: Height: 132 cm Width: 51 cm Depth: 102 cm See pictures for details.
Used Pastry Forming Machine Kalmeijer KGM Manufacturer : Kalmeijer Type: Kalmeijer KGM with 1 forming rollers Thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy operation The transport belts for the trays can be folded in and out Machine requires little space Machines can be moved on rollers Dimensions:Â Height: 122cm Width: 170cm Depth: 52cm Details see pictures.
Knife for Kalmeijer KGM Pastry Forming Machine NewâœProduct Descriptionâœ" Manufacturer: Kalmeijerâœ" Condition: Newâœ" Length: 31.5 cmâœ" Width: 2 cmDetails see picture
Gear Figurine Roller for Kalmeijer Pastry Forming Machine KGM New â Product Description âœ" Manufacturer: Kalmeijer âœ" Condition: New âœ" Material: Plastic âœ" Diameter: 10.5 cm âœ"  ̃ Hole: 2 cm âœ" Width: 2 cm Details see picture
Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order Number : 1263.920 C Order Number : 1600.905 C Order Number : 1600.900 C Order Number : 1120.920 C Order Number : 1120.919 C Order Number : 1100.935 C Order Number : 1100.940 C Order Number : 1383.919 C Order Number : 1270.900 C Order Number : Special Rollers  See picture for details
Load capacity: 5000kg, mast type: triplex, lift height: 5000mm, free lift: 1355mm, fork dimensions X/Y/Z: 1220mm/150mm/55mm, machine dimensions X/Y/Z: approx. 4300mm/1550mm/2500mm, weight: approx. 8100kg, operating hours: 176h. Documentation available. An on-site inspection is possible.
LASCO TSP 160 S forging press was built in Germany by Langenstein & Schemann A.G. (Lasco Umformtechnik GmbH). The machine has been continuously maintained and upgraded throughout its service life. In 2019, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO TSP 160 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex parts. It is ideal for forges and industrial plants that require high press forces and high repeatability of the manufactured parts. Its main purpose is die forging, metal stamping and metal forming, especially hot forming of steel or aluminium workpieces. It also enables punching, calibration of forgings, trimming and blanking of workpieces after the forgin ...
A vertical high-performance flow wrapping machine Robert Bosch is available. Format range: 360mm, packaging capacity: 80bags/min. An on-site inspection is possible. Expected to be available 2026.
Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 920 mm -Cross-section: 125 x 40 mm -Photography: see technical drawing in the photos -Dimensions: 1070/600/H125 mm -Weight: 136 kg
maximum number of results exceeded
please refine your search
