ma ga used for sale

- max. open blacnk width 800 mm - straigh line - automatic crash lock bottom - gluing system with discs - machine in production

- Baking Plate Amount: 76 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,100 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!

- Baking Plate Amount: 100 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: max. 5.700 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!

Baking Plates for EWA Baking Machine for Molded Cones - Condition: used - Wafer Length: approx. 130 mm - Wafer Diameter: approx. 30 mm

- Baking Plate Amount: 73 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,000 pieces / Hour - Cone Size: max. 230 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Transport Unit with Wafer Turner - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025

- Condition: used - Baking Plate Amount: 45 Baking Plates - Capacity: approx. 2.500 pieces / Hour - Cone Size: 19°, Length: approx. 75 mm, Ø approx. 35,75 mm - Engraving: without engraving Equipment: - incl. Drum Roller - incl. Stacking Table

- Condition: used - Baking Plate Amount: 45 Baking Plates - Baking plate Size: 260 x 240 mm - Capacity: approx. 2,200 - 2,800 pieces / Hour - Cone Size: max. 200 mm - Engraving: 5 x 5 mm Equipment: - incl. Cooling Conveyor - incl. Stacking Table

- Condition: used - Baking Plate Amount: 45 Baking Plates - Baking Plate Size: 260 x 240 mm - Capacity: approx. 18.000 pieces / Hour - Engraving: 5 x 5 mm - Product Size: Ø 60 mm Equipment: - incl. Transfer Conveyor - incl. Cooling Conveyor

Baking Plates for PRO 1 Baking Machine - Condition: used - Engraving (Lower Baking Plate): approx. 5 x 5 mm - Engraving Depth (Lower Baking Plate): approx. 1,45 mm - Wafer Sheet Thickness: approx. 3 mm - Connecting Shaft: approx. Ø 16 mm - Collar radius: approx. 96,5 mm

Manufacturer: Gannomat, Type: Super Drill, Control: hand, Drilling engine kW: 2,2, Working range max mm: 120, Drilling beam swivel-mounted: yes, Lochraster: 32, Spindelanzahl 1: 19, Swivel pneumatically 90-45°: yes, Work piece support: yes, Work stations: 1, Foot switch: yes, Max. drilling depth in mm: 80, Max. drilling height in mm: 80,

Machine for polishing and belt edges

Gassner bolt feeder with pneumatic lifting station and blower. Filter system for air transport with 8m pipeline

1x SK labeller GAI 6023-x01, built in 2021, for self-adhesive labels / adhesive labels with capsule roller & 2 label As good as new GAI 6023-x01 Year of construction 2021 2 label stations 1 station with 2 roll-on heads for roll-on capsules Attachment for capsules Molded parts for common bottle sizes Accumulation sensor in the outlet, collection table with belt drive Achievement: Labelling only 2800b/h with roll-on capsule: 2000b/h Price: €38,500 plus VAT ex Rheinhessen location

A CNC 5-axis high-speed milling machine Wissner is available. Travel path X/Y/Z: 600mm/500mm/350mm, max. workpiece weight: 460kg, table dimensions X/Y: 700mm/600mm, tool holder: HSK-F63. Machine dimensions X/Y/Z: approx. 2500mm/2950mm/1850mm, weight: approx. 3500kg, control: CNC HSC 6000. Includes Schunk NSE Plus 138-V1 zero-point clamping system, SPA 40 RF clamping pins, Hyfra Chilly 35 cooling system, air blast function, and tool measuring system. Documentation available. An on-site inspection is possible.

Measurements: Length: 2000mm Electrical data: V: 400V HZ: 50Hz Safety features: Yes Manuals: Yes Rotation direction: Clockwise Number of stations: 3 Labeling method: Adhesive Label placement: Front, Back, Neck ring label Label adjustment: Car Optical centering system: Mechanical Head adjustment: Manual No. of plates: 6 Plate movement: Mechanical cams

Used sharpener from Gami company type T400ES. New 2015. Pencil sharpener with a mesh for coating products with chocolate. The set also includes a vibrating table for pralines and a funnel for coating cookies with icing.

Turning diameter over bed (mm) 365 Turning length (mm) 1000 Spindle bore (mm) 42.5 Max. rotary diameter over carriage (mm) 205 R.P.M. / Speed 38 - 1600 (16x) Accessories: Digital display 2 axes 3 B. chuck 250 mm, 4. B. chuck 200 mm, documentation and Multifix steel holder

Edge Grinding Machine Gartner FLK 4 -used-incl. Mitre stop---------- Technical data ----------sanding belt width: 200 mm, sanding belt length: 2,350 mm, dimensions work table: 870 x 400 mm, belt speeds: 4, suction nozzle Ã: 80 mm, motor: 3 kW

EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg

MANUFACTURER: APV GAULIN MC 45 MILK HOMOGENISER TYPE: 5283 MC45-2,5 TPS CAPACITY: 20.000 l/h PRESSURE: 175 BAR 2 STAGES PRESSURE CONTROL: HYDROULIC CONTROL NUMBER OF PISTONS: 3 MOTOR 90 KW

Brown & Sharp Tesa Hite 350 Digital Height Gauge 007.30041

Mitutoyo HDS-G24 Digimatic Height Gauge HDS

Technical data: Printing Section 5 × UV Flexo Printing Units 5 × UV Dryers Web Inspection BST PowerScope 300 – Web Inspection System Unwinder Max roll diameter: 1250 mm Heavy-duty construction with pneumatic shaft and web tension control Integrated splice table and web guiding system Rewinder Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section 24" Supports reprocessing or secondary processing of pre-printed materials Additional Modules Ben Bunch 500 Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) Cross Cutting Cylinder (inline sheeting or perforation — precise  ...

Volume (Max): 1000 ml // Volume (Min): 250 ml

Originates from a central European production facility belonging to a prominent multinational pharmaceutical & healthcare company. Working Description: Suitable for weighing products up to 300g in pharmaceutical industry (previously used for blister boxes), Durable and hygienic full Stainless Steel frame and construction. Intuitive touchscreen display for easy operation. Height adjustment facility for seamless line integration. Left to Right direction of transport. Continuous belt speed control for optimised throughput. Fitted with an acrylic draught cover for stable weighing. Includes a PrintCard Terminal GA46 Thermal Printer for labelling. Standard air jet sorting/rejecting device for efficient removal of out-of-tolerance items. Technical Information: Weighing Range: 0 to 300g Accuracy: From ± 0.02 g. (accuracy specific to article  ...

Execution Suitable for potatoes and carrots Capacity: 10 kg Automatic water jet supports the discharge of peeling waste Safety microswitches on door and lid Easy to use Quality Housing and containers made of stainless steel Transparent plastic lid (control of the work process) Connection Power: 750 watts This device requires a fixed water connection Metrics External dimensions: W x D x H: 400 mm x 770 mm x 860 mm Scope of delivery 1 grating plate Guidelines Of course, produced in accordance with the hygiene and safety guidelines Article bears CE marking in accordance with the directive Material complies with European food standards Dimensions Width 400 mm Depth 770 mm Height 860 mm Details Capacity 10 kg Hourly production 120 kg/h Timer function 0.00 min to 4.00 min Power supply Power 750 watts Voltage 230V Phase(s) 1N/PE Frequency 50 H ...

PAPER CUP FORMING MACHINE SINGLE WALL 12 oz (90mm TOP DIAMETER) IN AN EXCELLENT AND WORKING CONDITION VERY LITTLE HOURS OF OPERATION .

Code: 0281 Brand: AGLA GALLI Model: 2 R 130 Automatic 2 roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials N° 2 inclined rollers - Thanks to this inclination, the rotating brushes, by oscillating, ensure a perfect polishing of the surfaces to be treated REVERSE" system , which restrains softens the reverses even with heavy materials like marble, wooden panels, etc. Length of 2 rollers mm 1300 Roller diameter mm 300 Useful working length mm 4300 Useful working width mm 1300 Max panel height mm 120 Motor hp 15 x 2 Working table height from mm 950 to mm 1180 Suction mouth diameter mm 200 Overall dimensions mm 5000 x 2350 x 1750 h Weight kg 2500

REF-2705 APV GAULIN 15-3.0 B HOMOGENIZER 1000 LITRES/HOUR Manufacturer: APV Brand: Gaulin Model: 15-3.0 B Serial no.: 1-02.452 Year: 2002 Single-stage homogenizer for liquids Overall dimensions (mm): 1,400 x 900 x 1,600 (LxWxH) Capacity: 1,000 l/h Max. temperature: 50 °C Homogenization pressure: 200 bar Electric motor: 11 kW/3x380 V/50 Hz Inlet/outlet connections: 50/65 mm Made of stainless steel, including some AISI 316 components N.B.: This homogenizer can be purchased separately or as part of an APV complete pasteurization system for fish broth also advertised on this site.

Five Picanol rapier weaving machines are available. Working width: 1900mm, weft colors: 8. Including 8 weft yarn feeders (feeders) and 8 heald frames. Documentation available. On-site inspection is possible.

(LIDS PRODUCTION) Machine consists of: -1x Roll-off block -Thermoformer Gabler Swing -Stacking

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

This 6-axis GANNOMAT ProTec 571 was manufactured in 2017, featuring a precise steel worktable and a working stroke length of 1000 mm on the X-axis. It includes a drilling unit with 13 vertical and 6 horizontal spindles, a milling unit with a power range of 3000-18000 rpm, and a grooving unit in Y. If you are looking to get high-quality woodworking capabilities, consider the GANNOMAT ProTec 571 machine we have for sale. Contact us for more information.

This 4-axis OPS INGERSOLL Gantry 1200 was manufactured in 2007. It features a 3000-liter dielectric capacity, machine feet, two heavy-duty pallets, and a 3R clamping system. Ideal for precision die-sinking EDM applications. Contact us for more information about this machine.

2011 OPS Ingersoll Gantry Eagle 5 (often referred to as the Eagle G5 or Gantry Eagle 500) is a high-precision Sinker EDM (Electric Discharge Machining) machine. Feature Specification X / Y / Z Travels 525 mm / 400 mm / 450 mm Work Tank Type Drop-tank (rises/falls for easy access) Max Workpiece Weight 1,000 kg (2,205 lbs) Generator Eagle PowerSPARK (60 Amp standard, 110 Amp optional) Z-Axis Jump Speed 18 m/min (This is exceptionally fast for EDM) Find more here - / Contact us at -

Drilling depth: 60mm, min. workpiece width: 800mm, max. workpiece length: 2500mm, workpiece height range: 10mm-60mm, machine dimensions X/Y: 1400mm/1400mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible.

Used machine Rows of holes Dowel drills Manufacturer: Ganner Type: Gannomat 120 Year of manufacture: unknown Power: 1.1 kW Working range: Drilling stroke: 120 mm

Number of spindles in row of holes: 11 Number of spindles horizontal: 3 Cup belt drill head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW

Collet / Gamesa - Radial drilling machine / mobile crane -Boom approx. 1200mm -Universal angle head can be adjusted in several ways -Spindle speed 95 - 750 rpm -Automatic feeds -Morse taper MK4 -Boom height adjustable approx. 1400mm -Control cabinet retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500Kg Hebkjvucbhon Au S Tsl

Used Used Capsuler Robino&Galandrino Astra F 6: Year: 2002 Condition: Good Used Capsuler Robino&Galandrino Astra F 6: Model: Astra F 6 Year: 2002 Speed: 7000 BPH Direction: Clockwise Manual head adjustment 6 snare heads type of capsules: Polylaminate Inlet cap presence check Capsule presence check Safety protections Code: BC 388 More details: https://bottlingscout.com

Used Used Capsuler Robino&galandrino Astra F4: Year: 2002 Condition: Good Used Capsuler Robino&galandrino Astra F4: Model: Astra F4 Year: 2002 Speed: 5.000 BPH Direction: Counterclockwise Manual head adjustment for the capsule distribution 4 heads Type of capsules: polylaminate (Can distribute the pvc capsules) for PVC ironing there is tunnel on conveyor Capsule presence check Capsules Formats: 29.3?60 32?60 34.25?60 30?60 (PVC) Bottle diameters: ? 66 mm; ? 76.1 mm; ? 80.3 mm; ? 82.4 mm; ? 88.4 mm; ? 106.5 mm Safety protections Code: BC 386 More details: https://bottlingscout.com

Used Used Capsuler Robino&Galandrino Astra F10: Year: 2010 Condition: Good Model: ASTRA F10 Year: 2010 Speed: 8000 BPH Direction: Clockwise Automatic head adjustment 10 heads Type of capsules: polylaminate (can also distribute PVC) for PVC ironing there is tunnel on tape Capsule presence check after distribution Star inlet/outlet with universal star Measurements of the diameters of the processed bottles: ? 66 mm; ? 76.1 mm; ? 80.3 mm; ? 82.4 mm; ? 88.4 mm Equipment for capsule formats: (dispensing cup) ? 29.3 mm x 60 mm ? 32 mm x 60 mm ? 31.6 mm x 45 mm ? 30 mm x 60 mm (PVC) Safety protections Code: BC 385 More details: https://bottlingscout.com

Used Used Capsuler Robino&Galandrino single stage 2z 16 t ? eolo 3/72 optical dc: Year: 2017 Condition: Good Used Capsuler Robino&Galandrino single stage 2z 16 t ? eolo 3/72 optical dc: Model: single stage 2z 16 t + eolo 3/72 optical dc Year: 2017 Speed: 17,000 BPH DirectioN: Clockwise No. 4 carousels One 16 heads for PVC capsules One 24 heads for centering capsule/sparkling wine bottle One 24 heads for 4 folds of sparkling wine capsules One 24 heads for smoothing sparkling wine capsules Double long range storage Double 4-cups capsules distributor Safety protections Code: BC 382 More details: https://bottlingscout.com

Used Used Capsuler Robino&Galandrino Fenix 2: Year: 2003 Condition: Good Used Capsuler Robino&Galandrino Fenix 2: Model: FENIX 2 Year: 2003 Max speed: 2,700 bph Direction: clockwise Manual head height adjustment Plateau capsule magazine 2 heads for pre-ironing/centering, 2 heads for the 4 folds and 2 heads for smoothing 2 thermal heads for PVC Optical Centering Centering only UV capsule Safety protections Code: BC 381 More details: https://bottlingscout.com

Used Used Capsuler Robino&Galandrino Astra F6: Year: 2006 Condition: Good Used Capsuler Robino&Galandrino Astra F6: Astra F6 Model Year 2006 Speed: 6.000 bph Direction: Clockwise 6 rolling heads for polylaminate capsules Long range storage Height adjustment of electric capsule distributor Height adjustment of electric rolling carousel Speed adjustment of heads with potentiometer Machine speed adjustment by inverter Safety protections Machinery Code: BC 378 More details: https://bottlingscout.com

Used Used Capsuler 2001 GAI 4608 DL: Year: 2001 Condition: Good Year 2001 capsule distributor by plateau Direction: Clockwise 8 heads for rolling polylaminate capsules Speed: 6.000 bph Height adjustment of electric capsule distributor Height adjustment of electric rolling carousel Head speed adjustment with potentiometer Machine speed adjustment by inverter Available bottle formats: ? 80 mm ? 105 mm Used Bottling Machinery Code: BC 377 More details: https://bottlingscout.com