ma ga used for sale

Manufacturer: Gandra Model: TEC 500+ Year of Manufacture: 2017 Condition: Used Filling Type: Automatic (Hot or Cold Filling) Supported Bag Sizes: 3L, 5L, 10L, 20L Packaging Feed: Bags inserted automatically from a belt or manually Output Capacity: Up to 500 bags/hour (3L capacity) Features: - Vacuum generation - Nitrogen injection after filling - Liter counter and bag counter - Manual removal of filled bags Power Supply: 400 V / 50 Hz Installed Power: 1.5 kW Power Consumption: 2 kW Required Air Pressure: 6 bar Find more here - / Contact us at -

Fully functional single-shaft wood shredder - currently in operation in our factory. Including electric control system (PLC), control cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Specifications Rotor working length: 1,500 mm Rotor diameter: 485 mm Engine: 55 KW Rotor speed: 100 RPM Rotor blades: 76 pieces concave / 35x35 mm 4-way rotatable cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg More details on request. Errors in the information excepted.

turning diameter over bed: 410 mm turning diameter over slide rest: 260 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 205 mm spindle bore: 50 mm total power requirement: 4,5 KW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot runner controller - Gammaflux (5 pcs.) Year of construction: Location: Lodz, Poland Description: 6 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Static frequency converterManufacturer: GARBE LAHMEYER & Co. AGTyp SU3760.2aFZ231Year of manufacture: 1989Fabr. No.: A2K 60229 0001Nominal power 500 kVAStromart DNetching voltage 380 VoltInput frequency 50 HzInput current 760 Amp.Type power Input 760 Amp.Output voltage 380 VoltOutput frequency 50 HzOutput current 760 Amp.Type power output 760 Amp.- Control unit GARBE LAHMEYER Type AEB 60Dimensions cabinet (W x H x D) 2250 x 800/900 x 2550 mmTransport dimensions (W x H x D) 2430 x

Conveyor belt, trough conveyor belt, trough conveyor GASUS type DG 300-5/2,75Belt conveyor, conveyor belt, belt conveyorFabrig Nr: D-7321915 Year of construction 1996Effective length: 2.75 metersBelt width: 230/300 mmDeflection pulley diameter: 210 / 230 mm (rubberized drive roller)Deflection pulley width: 400 mmBelt speed: approx. 15 meters/min. Motor power: 0.75 kWNerg connection: 400 volts, 50 Hz - Drive via SEW geared motor- Inlet hopper 550 x 430 mm- Metal idler rollers with maintenance-free ball bearings- Strip tension via threaded spindles

Conveyor belt, trough conveyor belt, trough conveyor presumably GASUS type FB 400 x 5500Belt conveyor, conveyor belt, belt conveyor Fabrig Nr: F-02071168 Year of construction 1996Working length: 5.5 metersBelt width: 400 mmDeflection pulley diameter: 225 mmDeflection pulley width: 450 mmBelt speed: approx. 30 meters/min. Motor power: 1.5 kWNerg connection: 400 volts, 50 Hz - Drive via tubular motor- Inlet hopper 600 x 400 mm- The support stations are 2-part troughed- Metal support rollers with maintenance-free ball bearings-

Olive and pot belt drilling machine Ganner for windows Type 370 Machine No. 190469 Built in 1994 Combined Corner Bearing and Olive Drilling Machine Drill head with 3 drill bits Motor power 0.75 kW 2800 rpm Compressed air connection 5 – 7 bar Suction nozzle diameter 100 mm Well functioning condition Dimensions approx. 2700 x 900 x 1400 mm Weight approx. 250 kg

GALA UNDERWATER PELLETIZER, Type SLC 6, Polymer diverter-valve with hydraulic-pack, die-plate 24 x Ø 3,2 mm ( 5° ), 6-arm knife-holder, By-Pass-System, GALA TWS water-box, heating power 12 kW installed, Water-pump 5,5 kW, GALA Spin-dryer 16,2 BF with 4 kW, Blower 1,1 kW, Siemens Control Cabinet Xantex ( MAAG )

gebr. Slotted Hole Drilling Machine GANNER GANNOMAT Junior LBM 320 Drilling on 2 levels YOC 1992 Motor power: 1.5 kW (380V / 16A plug) Rated current: 3.4 A Spindle speed: 3,000 rpm Pneumatic height adjustment: 150 mm Clamping height of the workpieces: max. 250 mm Working height: 850 mm Dowel pitch: 12 mm 2-lever operation 2 pneum. Workpiece clamp 3 plug-in stops (2x 90°, 1 x mitre stop) Compressed air connection: 6 bar Weight: 270 kg Floor space: 1,200 mm x 1,000 mm Technical data according to manufacturer's specifications.

Second Hand Atlas Copco GA250VSD 250 kW with 10 bar and 44.90 m3/min. Year of manufacture 2018 with around 34,000 hours

Second Hand Atlas Copco GA110VSDFF 110 kW at 8.30 bar and 21.60 m3/min. Built in 2018 with around 29,000 hours. Frequency-controlled and integrated dryer.

Second Hand Atlas Copco GA315VSD. 315 kW with 8.5 bar and 58.50 m3/min. Year of manufacture 2019 with around 36,000 hours

Second Hand Atlas Copco GA400W (water-cooled) 400 kW, 8.5 bar at 66.60 m3/min. Year of construction 2009

Second Hand Atlas Copco GA18VSD+. 18.5 kW with 13 bar and 3.71 m3/min. Year of manufacture 2014 with around 38,755 hours

Key data: 36 KW, 45 kVA, 400 V

Manufacturer's warranty of 30 months Stamford alternator Control of ComAp ABB Circuit Breakers Call us directly at +49 176 82370794 Power Generator Specifications: Model No.: EQ-I4536 Prime Rating: 45 kVA / 36 kW Standby Rating: 50 kVA / 40 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45AM1A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight open: 1045 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and ...

Second Hand Atlas Copco GA22VSD+FF. 22 kW with 13 bar and 4.50 m3/min. Dryer and inverter integrated. Built in 2019 with only 5980 hours

quantity: 1 Koffer : . The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: SIEMENS 840D SL ShopTurn turning diameter: 700 mm swing over bed: 900 mm turning length: 3065 mm c-axis: indexing: 0.001 ° turning speeds: -2500 U/min tool taper: VDI 50 Top turret tool hodler:: 12 tailstock quill taper MT: 5 y-travel: 160 mm rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 30 m/min Overall size: 4450x2100x2350 mm rapid traverse Z-axis: m/min weight of the machine ca.: 7200 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gabarino MU80-250 Pump Ship Condition see photos Pump unused Electric motor overhauled

Assortment of measuring tools, calipers Digital depth caliper Mitutoyo 571-203-10, measuring range 300mm Digital gate valve Garant 412601/150 (manufacturer probably Mitutoyo), measuring range 150mm Digital caliper unknown, measuring range 150mm Analogue caliper Expert, measuring range 300mm The batteries have been renewed or are in order. The measuring tools can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Height=0.42 m, Overall length= 0.52 m, Overall width= 0.44 m, Net weight= 51 kg,

We currently have over 15 Atlas Copco GA90 in stock in various versions. Frequency-controlled. With integrated dryer.

1 Galdi Gibelkarton filling machine for long-life fresh milk Type ESL milk with 30 days BBD Galdi model RG27Packaging format 1l, 0.5 l and 0.25 Cap at the moment OSO30 from 18.11.2025 (cap retaining ring) Year of Make: 2017 Operating hours September 2025 29,000 h Product ESL Milk, Soy & Oat Milk Performance 7,200 With outfeed belts, cap transport and our own CIP Most important spare parts package at 35,000 euros, still to be negotiated without ET

  - Build with double hirth coupling - T slot 22 with Jump off 200 mm - Diameter off center hole 50 mm

A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range ...

GAMMAMECCANICA Compac 125 mm. Construction year 1998 Including Loading conveyor belt, Metal detector, Compactor with driven haul off for reels, master dosing unit Engin Plast, Extruder 125 mm diam. 36 L/D with degassing pump d.c. Ansaldo drive 197 kW, Total installed power 501 kW motor, BD plast non-stop screenchanger diam. 200 mm, hydraulic power station, water ring pelletizer M 8500, Electrical cabinet, Type of machine: GAMMAMECCANICA PLASTIC RECYCLING LINE 125 mm.

x-travel: 550 mm y-travel: 400 mm z-travel: 400 mm Control: INGERSOLL ANDRONIC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

steam turbine RATED POWER 1824 KW SPEED 8490 1/min pressure 19,5 bar abs exhaust pressure 0,56 bar

4000 werkuren! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L

GAMMAMECCANICA TANDEM SYSTEM 125 mm. 950 kg/h double screening, Throughput rate up to 600-950 kg/h ca, depending on material and feeding rate (0,30-0,40 Kwh/kg), Line suitable for the recycling for heavily printed, high humidity and contaminated materials., High performance degassing chamber for removal of up to 10 times more gas and humidity in the melted material compared to other systems (so you can save on the cost of an agglomerator), The line includes :, Loading conveyor belt, tunnel metal detector, automatic compactor, N.2 Dosing unit for masterbatches and more, 1st extruder with 125 mm. screw Ø 28 L/D, 1st degassing point, FIMIC RAS 500 fully aumatic screenchanger, control cabinet, 2nd extruder with 140 mm. screw Ø 18 L/D, 2nd degassing point, BD-PLAST non-stop screen-changer, TDA6 GM water ring pelletizer, heat exchanging unit, vibrating screen, blower, Water treatment unit ,  ...

Technical data: Maximum print width: 165 mm Web width: min. 80 mm, max. 181 mm Print length: min. 82.55 mm, max. 457.2 mm Components of the machine: • Corona treatment • Delam-/Relam unit • 3x Letterpress units • 1x Hot foil stamping unit • 3x Letterpress units • Turning cross • Flat die cutter • Lamination unit • Rotary die cutter / Gap-Master with magnetic die cylinder: Z96, Z100, Z102, Z104, Z108, Z112, Z120 • Printing cylinders: 6x Z88, 5x Z90, 6x Z96, 1x Z98, 6x Z100, 6x Z104, 6x Z106, 6x Z108, 6x Z112, 6x Z114, 6x Z120, 6x Z132, 6x Z138

Web handling system with web guide, web cleaning, and corona treatment unit 1 screen printing unit (semi-rotary) 5 offset printing units (semi-rotary) 1 hot foil stamping unit (semi-rotary) 1 additional screen printing unit (semi-rotary) 1 embossing unit (flatbed) 1 flatbed die-cutting unit Matrix stripping and dual rewinding system Upgrade: In 2008, the flatbed embossing unit was added A complete overhaul was carried out in 2017, including full mechanical and electronic refurbishment. Replacement and upgrade of the control system to Version 3

Mobile proofer 4060 NEW Simple proofer/warming oven Model: Gärmobil 4060 longitudinal Thermal double glass door with soft closed LED easy control with timer Temperature adjustable from 30 to 90°C Humidity adjustable from 60 to 95% Capacity: 20 trays 400x600 mm longitudinal Connection 230 V New device & SAB tested with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!

Unwinding 2 flexographic printing units 2 UV drying 1 Screen print 2 punching unit Mesh winder Train station Reel Printing Accessories: Pressure cylinders, magnetic cylinders, anilox

Relax Web guidance 2-sided Teknek web cleaner 8 x flexographic printing stations 8 x GEW UV Dryer Cooling rollers and coolers included 1 x punching station with Rotometrics Accutrack unit Waste rewinding Sheet station with delivery Rewind EL Scan Inspection Camera 7 x Sets of Printing Cylinder with Magnetic Cylinder

Transaction Web cleaning Corona 10 printing stations 10 flexographic printing units 10 paint pumps 1 hot foil 1 Screen print 1 Lamination 1 cold foil fixture 10 Uviterno UV Drying 1 rotate punch 1 Web Video 1 Rewind Printing Accessories: 336 Pressure cyinder 20 speedy whales 4 magnetic cylinders

Web unwinding device Corona Railway cleaner 8 flexographic printing stations 8 GEW UV dryers (GD3) 8 cooling rollers 1 rail system, 1 cold foil stamping unit, 1 laminating unit, 1 print job gluing unit (2 colours) Video control Register Control Rewinding unit Waste winding 1 rotary punching unit Refrigerator 8 pressure sleeve sets with magnets 8 anilox rollers

hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1

• Dry-running rotary valve vacuum pump • Suction capacity 55 m³/h • Final pressure 150 mbar • Motor power 1.5 kW • Price per pump

gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1996 equipped with Weishaupt combi burner GL3/1-E, ZMD, 90-630 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.

1 gebr. Rapid steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 600 Capacity : 600 kg/h Heat output : 400 kW Operating pressure max. : 13 bar Water content approx. : 43 l Year of construction : 1996 Heating coil year : 10 / 2023 equipped with Weishaupt gas burner, gas control system, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

length: 2000 mm width: 1000 mm height over floor: 1000 mm total power requirement: 0 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 31,51,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 LOCK INSPECTION SYSTEMS tunnel metal detector type Garmentcheck MET 30+, year 2000

General SKU321U760 LocationBarneveld MakeMettler Garvens TypeS3 No.330103 Year of construction2000 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Total height1,87 m Weight260 kg CEcheck Floorspace1,16 x 0,70 m Extra SpecificationsCheckweigher system with a weighing range from a minimum of 10g to 1400g, delivering precision with an accuracy of 1g. This system is equipped with a touchscreen control interface. The conveyor belt is easily removable, with total dimensions of 1150x150mm. Miscellaneous transportMettler GarvensConveying systems > Miscellaneous transportBrand > Mettler Garvens What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Net ...

General SKU391U1099 LocationBarneveld MakeWLS Gabler TypeR-250 No.12850 Year of construction2001 Main Features MaterialStainless steel Motor0.37 KW Inlet diameter100 mm Specified Features - Noduliser MaterialStainless steel 1.4552, Stainless steel 1.4404 Nodulisercheck Disc diameter250 mm Disc depth150 mm With outlet20 x 60 mm With covercheck Motor0,37 kW, 180Volt, 3000rpm With variable speed drivecheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight250 kg CEcheck Floorspace0,4 x 0,8 m Total height1,4 mNodulisersWLS GablerCompactors > NodulisersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mo ...

General SKU418W1323 LocationBarneveld MakeGab Neumann TypeG3-400/250/80-4/10-D No.15754-12721 Year of construction1985 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface2.48 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface2.48 m² Tube capacity17 l. Max. temperature-30°C/+80°C Shell capacity17 l. Shell diameter500 mm Shell length615 mm Max. temperature-30°C/+180°C Shell connections2x dia. DN50, Information Total height1,50 m Weight340 kg Floorspace0,70x0,70 m Technical specs Extra informationVolume 17 l., allowable pressure-1/+3 bar, allowable temperature-30°C/+180°CShell and tube heat exc ...

General SKU321U761 LocationBarneveld MakeMettler Toledo Garvens TypeX3S No.35000053 Year of construction2007 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Product space60x140 mm With conveyor beltcheck Belt width150 mm Belt length100 mm With motorcheck With variable speed drivecheck Belt speed63 m/min Capacity210 plastic bottles/min Information Total height2,15 m Weight750 kg Floorspace2,7x1,2 m Extra SpecificationsWith a weight, type: BF-20-L-P-I, max. up to 15 kgMiscellaneous transportMettler GarvensConveying systems > Miscellaneous transportBrand > Mettler Garvens What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The  ...

General SKU319U745 LocationBarneveld MakeAEG vibrationstechnik TypeGA1712/3240-EY No.B60217 Year of constructionunknown Main Features MaterialStainless steel Length1850 mm Width310 mm Specified Features - Vibro feeder MaterialStainless steel 1.4305 (303) Vibro feedercheck Feeder diameter310mm Feeder length1850mm Closedcheck InletDia:300mm OutletDia:300mm With vibro motorcheck With motor0,55kW, 380/420Volt (EX) Without controlscheck Information Total height1,1m Weight750kg Floorspace2x0,7mVibro feedersAEG VibrationstConveying systems > Vibro feedersBrand > AEG Vibrationst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU218U113 LocationBarneveld MakeWLS Gabler Spheronizer Main Features MaterialStainless steel Motor3 KW Specified Features - Noduliser MaterialStainless steel Nodulisercheck Disc diameter600 mm With outletcheck With covercheck Motor3.0 kW, 230/400, 1400 rpm With variable speed drive(frequency control) With spraying nozzlecheck Information Mounted on framecheck With switchcheck With switchgearcheck (as is) Floorspace1,4x0,8 m Total height1,9 m Weight650 kg Extra SpecificationsIncluding: 1x Single Temperiertechnik heating units STW 150/1-9-20-K1S: 9 kW: 400 Volt NodulisersWLS GablerCompactors > NodulisersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...