liquid used for sale

P119 - used approx. 28.8 m³ / 28,800 litres GF-UP tank / plastic tank, double-walled, flat bottom tank, in good condition. technical details: capacity: approx. 28.8 m³ / 28,800 litres material: double-walled GF-UP tank manufacturer: Formoplast dimensions: Ø approx. 3.0 m x total height approx. 4.5 m certification mark: PA-VI 312.002 (DIBT examination report not available) specific weight: 1.4 kg / L Used storage tank in good condition. The hull will be newly painted in dark green. Double-walled flat bottom tank, aboveground storage tank with various connections such as ventilation, feed, etc., lid on the roof. According to the age, traces of use are present. For media with a specific weight of up to 1.4 kg/L, the tank formerly contained iron(II) chloride. This container can be used as a storage tank for liquid feed, water, whey and many different media. Pric ...

The Brogli machine is suitable for powdered and liquid raw product using heat, pressure and mechanical stirring energy to produce homogeneous products for the chemical, pharmaceutical, cosmetic or food industry. Usable volume: 300 liter, volume tot.: 369 liter, min. volume: 100 liter.

Vacuum deaerator that removes dissolved or entrained air, prevents oxidation of product and eliminates color and flavor changes. Can be used for liquid products like milkproducts, fruit juices, soft drinks, sauces and so on. Including: Vacuum pump Sihi, (type: LEMA50), product discharge pump, APV WI + 55/35-220 190. Trimod Besta level sensor , interconnecting piping. Including control cabinet with Siemens S5 plc and HMI. HMI programm is running, PLC programm fails. YOM 1997, excellent condition.

Separator WESTFALIA Type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, citrus and tropical fruits for Pectin Capacity: 300-13.000l per hour with 4.800 rotations/min Measurements and Weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical specifications: Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the material to be centrifuged: Heavy liquid: 1.0 kg / dm3 Solid: 1.45 kg / dm Test books, tools, drawings available!

New Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60

Used and overhauled Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60

In-line filling and screwing machine with 5 stations for filling liquid dietary supplements. For PET bottles of 100/500/1000 ml. Max capacity 1300/1000/800 bottles per hour. Adaptation required for new bottle shape !

Horizontal CNC drilling and milling machine make PFEIFER type F 105 CNCFabr. -No: 2399, built in 1991Technical specifications:Travel X: 1600 mmY: 1000 mmZ: 1000 mmSpindle diameter: 105 mmSpindle mount: ISO 50Quill stroke: 500 mmDistance from the center of the spindle to the clamping surface: 0 - 1000 mmmax.workpiece weight: 4000 kgSlewing ring diameter: 830 mmClamping area: 1000 x 1200 mmTable height above floor: 875 mmExternal dimensions: 4830 x 3040 x 2700 mmWeight: 10850 kgwith- Control Heidenhain TNC 355- Measuring device actual value display X, Y, Z, W- hydr. Clamping- automatic central lubrication- Liquid cooling device- Ball screws X, Y, Z, W- fixators- Ampere meter- oil cooling- electr. HR 250 handwheel- mech. Hand crossused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not bi ...

Manufacturer: Hamba Maschinenfabrik GmbH Type: 2400 Y.O.M.: rebuilt by Grunwald 1993 Capacity: up to 2400 Bech./h (depending on the product) lanes: 1-lane, 12-plate Filling: semi-liquid products such as cream cheese, yoghurt, cream, ayran etc. Filling volume: 100 - 500 ml , adjustable Cup size: round, 95 mm Type of closure: aluminium board, sealing Connection values: 380 V, 50 Hz, 1.7 KW Outlet conveyor included Optional: Machine overhaul possible

Cleaning system make DÜRR type Ecoclean 18 W / DT 16/10Fabr. -No: 5031 built in 1999Workpiece width max.: 700 mmWorkpiece height max .: 600 mmWorkpiece weight max.: 1000 kgContainer capacity: 1.5 m³Working temperature: 45 - 70 °Pump capacity: 35 m³ / hPump power: 7.5 kWPump pressure: 4 barNumber of hand nozzles: 3general spray system: on all sidesTurntable Drum: 1400 mmMax. Table load: 1.5 tRotary table speed: 0.3 - 1 rpm.Max. Feeding quantity: 500 kgusable area: 1.5 m²Weight of the system: 3.0 tDrive power of the turntable: 7.5 kWConnected load: 57 kWWater connection: R1 Fresh water consumption approx. 50-100 l / hHeating power: 48 kWHeating time: 2.2 hExternal dimensions of the system: 4460 x 2970 x 3750 mmWith- Loading trolley- Cover that closes the treatment roomxa0xa0(2 vertical lifting columns with geared motor)- rigid spray system- add. 3 manual externally operable nozzles- C ...

2-station polishing station make LÖSER type FS 384 G2Machine -No: 268 built in 1989Technical specifications:Number of polishing stations:2Polishing disc diameter approx. :240 mmTable length: 2750 mmTable width: 150 mmPassage height: 150 mmPassage height: 100 mmAbrasive belt width: 2500 x 150 mmConveyor belt feed: 2.5 + 5.0 m/min.Conveyor belt: 3000 x 150 mmConnected load: 380 V, 50 Hz:Drive power: 5.5 kWWith- Polishing stations with liquid paste gunsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

BACHILLER PC-200 Complete Process equipment (2004). Unused Processes: Dispersion, emulsion, humidification, grinding, homogenization, dissolution, mixing, suspension and vacuum deaeration. For suspensions, emulsions and dispersions. For the preparation of any liquid or pasty product since all manufacturing operations can be carried out in a single device, from the loading of the ingredients to the deaerated and preparation prior to packaging. It combines different basic elements of agitation such as the colloid mill, disperser and mixer-scraper ideal for suspensions, emulsions and dispersions. Sectors: pharmaceutical, cosmetic, food or chemical industry. In stainless steel The PC incorporates: - Agitation, grinding and dispersion devices with independent actuation. - Colloid mill with real grinding action, thanks to the milling of its elements and the regulation of sepa ...

Köttermann suction table with liquid drain. Sold as part of a production shutdown. Specifications 16Amp, 80 Watt. 230 / 400 volts. 50hz Dimensions working space 1.17m x 0.61m x 1.15m H Opening door 0.9 x 0.845m Total dimensions HxWxD 2,80x1,50x0,90 m Inhrud9 Weight 220 kg, Ceramic work surface with funnel basin, media connection: electricity, waste water, Mistakes not ruled out

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...

BTS-MF40 Cans_PET Special Waste Baler The BTS-MF40 Cans_PET Special Waste Baler with perforator is ideal for compacting difficult and hard materials such as beverage cans and PET bottles. The perforator compaction head pierces empty but also full bottles and cans so air and liquid can escape and in the same process material will be compacted. The Special Waste Baler impresses with its easy operation throughput and large filling volume. - Solid bales with bale weight up to 40 kg - Suitable for empty and full cans and PET bottles - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Perforator compaction head for piercing closed cans or PET bottles so air and liquids can escape - Roller guided head for ease of movement - CE-certified - Quality product Made in Europe Pressing force: 8 Ton Motor: 2.2 kW 16 Amp Power suppl ...

Liquid receiver Make Profroid, model RES 70/PFCR2HZB11ZC, seril no. 115909/130/25489, year 2007, PS 28 bar, TS Min/Max: -10ºC/+70ºC, fluid R404A. The tube is sold dismantled. Ex Works Loaded: Oradea/Romania Price Euro 550 Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana.

Roche MagNA Pure LC Nucleic Acid Preparation Station Manufacturer's description, all information without guarantee. Performances Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from the software-supported setup of reagents and disposable items. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels), LightCycler ® 480 multiwell plates (96-well), PCR plates or strips or tubes. Product The MagNA Pure LC instrument is a benchtop device for fast, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection, and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument ...

COMPLETE WAREHOUSE COLD INSTALLATION OTT & PEETZ BRAND TYPE: V18-4, serial no. 01922971, manufactured 1992 and REFRIGERATING CONDENSER GÜNTNER GVH 101A / 2E (S), manufactured 1999 The outdoor installation is complete besides the electric panel has 4 Bitzer compressors, Bitzer ES 900 liquid receiver + pressure switch + condenser GÜNTNER GVH 101A / 2E (S) The four compressors are: 2 Bitzer 4P-15.2 11 kW compressors, volume each 47.14 mc / h, 50 Hz, ND / HD max 19/25 bar, year 1992, 380-420V power supply, 3 ph 2 Bitzer 4N-12.2 Y compressors, volume each 56.10.14 mc / h, 50 Hz, ND / HD max 19/25 bar, year 1999, power supply 380-420V, 3 ph It covers an internal cooled area of 152.38 square meters. GÜNTNER GVH 101A / 2E (S) REMOTE CONDENSER, 2 volume fans in liters 563, minimum pressure at 21 bar / 60 ° C, maximum working pressure 28 bar, maximum temperature 100 °C. At th ...

Luftgekühlter Flüssigkeitskühler Used York YAES0645SA 50Y air cooled water chiller on R134a build in 2006. Complete with 2 York YTS J-A-G screw compressors, York UHPM025518 Shell&Tube heat exchanger functioning as evaporator with a volume of 599/226 liter, Aluminum condenser with 8 Ziehl-Abegg FN091-SDA.6N.V7P2 fans - 50 Hz - 1,85/1,05 kW - 840/630 RPM, 2 liquid line filter dryer and a York display. The chiller has two refrigeration circuits. Brand York Type YAES0645SA 50Y Product type Air Cooled Chiller Capacity kW 589,0 Capacity Tons 167,5 Refrigerant Freon Refrigerant Type R134a Weight in kg. 6300 Sizes 5450x2340x2500 mm (LxWxH) Compressor(s) type & model York YTS J-A-G (2x) Display York Display Number of fans 8 Fan specifications 50 Hz - 1,85/1,05 kW - 840/630 RPM Remarks | Y.o.b. 2006 Amount in stock 2

P213 - used approx. 30 m3 / 30,000 L polyester tank, GRP tank, Speidel tank, standing, flat bottom. Technical details: Content: approx. 30 m3 / 30,000 litres Material: Polyester tank / GRP tank Manufacturer: Speidel Tank- und Behälterbau GmbH Dimensions: approx. 3.00 m x approx. 4.60 m high Other: Used polyester tank in very good condition, manufacturer Speidel. Vertical flat bottom tank, dome at the top of the roof, several connections, incl. filling line. The container can be used as a storage tank for many different media such as water, liquid food, whey, potato vapour bowls, molasses, manure, seepage juice, rapeseed oil or as a rain collection tank, etc. Price on request. Transportation can be arranged cheaply. We can also rework the tank as desired, please ask us. It is not possible to update all our listings daily. As our stock is constantly changin ...

Rinser, filler and capper unit for PET bottles (incl. liquid nitrogen dosage device)

Flocculate plant powder and liquid 2 m3 in very good condition.

Stock # U2397-2 Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifti ...

Auto. Filling machine (inline filler, 8 positions) for liquid products. Dosing volume: 50 to 1000 ml. Output: up to 4000 units/min. PLC SIEMENS Simatic S7-300. Machine with a lot of accessories and spare parts (the machine was rebuilt to semi-automatic operation).

Autom. filling machine (inline filler, 8-positions) for liquid products. Dosing volume: 50 to 1000 ml. Output: up to 4000 units / min. PLC SIEMENS Simatic S5. Machine comes with a lot of spare parts and accessories.

Used 903Kw POWER-CIAT LXH.M 3750 HPS aircooled chiller with integrated hydraulic module. Complete with 3x Bitzer CSH8561-125Y-40P hermetic screw compressor with economizers. Direct expansion shell and tube evaporator with a water capacity of 219 ltr. Aircooled condenser with 12 fans diameter 800 mm and airflow of 264.000 m3/h. Electric control with microprocessor Xtra connect. Capacity control from 17 to 100%. Hydraulic module with buffer tank 950 ltr, expansion vessel 80 ltr and twin centrifugal pump. Specifications: Our inventory stock No. 12831 Brand CIAT Type LXH.M 3750 HPS Product type Air Cooled Chiller Capacity kW 903 Capacity Tons 256,8 Refrigerant Freon Refrigerant Type R 407C Liquid buffer tank Pump Hydronic Module Weight in kg. 8.576 kg Sizes 9400x2500x2200 mm (LxWxH) Compressor(s) type & model 3x Bitzer CSH8561-125Y-40P Display Ciat xtraconnect cont ...

- net.weiht 641 kg - Liquid wolume 253 L - Design pressure 10 bar - Total area 91,9 m2 - material AISI 316 - sealing material EPDMF CLIP-ON

BOSCH Type KLD 1041 Leak Test Machine for Ampoules and Vials Leak test machine for glass containers. Linear automatic machine for the inspection of ampoules, injection cylinders/cartridges and injection bottles/vials, which checks each container at four inspection points by means of high-voltage technology. The testing principle is based on the detection of the changing impedance of a container filled with an electrically conducting liquid. The containers are examined for: hairline fissures and pinholes ; insufficient glass wall thickness/tip domes too thin ; capillary pores ; leaking fusion points, sealing points and ampoule neck tips ; absence of fill. MAIN FEATURES: It is recommended to carry out the container leaktightness test directly after sterilization or fusing. The unit is equipped with: conveyor system, infeed belt, 4 high-voltage inspection stations (1-2 check bodies and ...

Fermentole vain Fermento High-Tech Fermenter Plant for the preparation and preservation of liquid sourdough with Dual Care system for the best flavours Control of the fermentation phase and the preservation phase easy-Touch control Mixing time and speed can be Stainless steel Stirring tool extendable with overflow - probe and alarm buzzer Exhaust height 440 mm Tank capacity 100/125 kg Cooling capacity per hr approx. 6°C falling Key 400V / 50Hz / 2.1kW, 16A-CEE plug Dimensions: 820 x 1050 x 1690 mm, WxDxH More TOP bakery machines in stock!

Fermentole vain Fermento Plant for the preparation and preservation of liquid sourdough with Dual Care system for the best flavours Control of the fermentation phase and the preservation phase easy-Touch control Mixing time and speed can be Stainless steel Stirring tool extendable with overflow - probe and alarm buzzer Exhaust height 440 mm Tank capacity 100/125 kg Cooling capacity per hr approx. 6°C falling Key 400V / 50Hz / 2.1kW, 16A-CEE plug Dimensions: 820 x 1050 x 1690 mm, WxDxH More TOP bakery machines in stock!

Fermentole vain Fermento Plant for the preparation and preservation of liquid sourdough with Dual Care system for the best flavours Control of the fermentation phase and the preservation phase easy-Touch control Mixing time and speed can be Stainless steel Stirring tool extendable with overflow - probe and alarm buzzer Exhaust height 440 mm Tank capacity 100/125 kg Cooling capacity per hr approx. 6°C falling Key 400V / 50Hz / 2.1kW, 16A-CEE plug Dimensions: 820 x 1050 x 1690 mm, WxDxH More TOP bakery machines in stock!

Decanter Alfa Laval Foodec 700 in excellent conditions. Control Panel not included Decanter Foodec 700 Yr : 2012 Description Bowl : 2 or 3 phase version: 2 phases - open Maximum main speed: 3100 rpm Bowl length: 2565 mm Bowl diameter: 650 mm Beach angle: 20° Solids discharge type: 360°-type with 8 wear liners Solids discharge radius: 175 mm Wear protection solids discharge: Wear liner in tungsten carbide, 8 pieces Solids transportation aids, cylindrical section: Ribs Solids transportation aids, taper section: Ribs Material - hubs: AL 111 2329 (Duplex stainless steel) Material - bowl shell: AL 111 2329 (Duplex stainless steel) Material - bolts: A4-80 (AISI 316) Liquid outlet, type: 8 Standard Plate Dams Conveyor : Features: Windows / Double cone Feed zone type: Esbjerg with exchangeable wear liners (EU3) Pitch: 1x230 mm Flight inclination: Perpend ...

Fermentolevain Fermento Exhibition Device! Plant for the preparation and preservation of liquid sourdough with Dual Care system for the best flavours Control of the fermentation phase and the preservation phase easy-Touch control Mixing time and speed can be Stainless steel Stirring tool extendable with overflow - probe and alarm buzzer Exhaust height 535 mm Tank capacity 200/250 kg Cooling capacity per hr approx. 6°C falling Key 400V / 50Hz / 3.3kW, 16A-CEE plug Dimensions: 1040 x 1300 x 1810 mm, WxDxH New machine with 12 months warranty Optional: Built-in scale Water connection with hand shower Cleaning Cycle More TOP bakery machines in stock!

Cleaning plant for die casting emulsion, process wastewater treatment, waste water treatment used Manufacturer: VIBROCHEMICA / ROOS & Co Type: 1000 CA/1 Built: 2006 Power requirement: 1 kW Dimensions: approx. M The system includes the cloth belt filter / gravity filter with slitting system and tank, oil skimmer, collection tank with agitator and liquid detectors. The plant is used for the treatment of die-cast emulsion waste water and was in operation until the production site was completely dismantled.

Offer 7 paint mixing buckets mixing tank agitator tank Drais 300 l rollable (for e.g. Drais color mixing unit (dissolver) type RN 218) Fig. 1-7 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories for the Drais-Farbmischwerk type RN 218 (sold). Technical data (partly estimated or from reference plants): Manufacturer: Drais Designation: Paint mixing bucket Mixing tank Agitator tank Year of construction: probably 1985 Material: sheet steel Inner diameter: 80 cm Height: 80 cm (overall) Weight: approx. 130 kg Quantity: 7 pieces with paint residues. Also available in parts for 290€/piece. further assets from this plant: -for material separation centrifuge SZB0 1000C 960 1/min 6 loads/h The centrifuge was part of a wallpaper production plant. After cleaning the tools, it is used to separate the plastisol from the  ...

GeneralUniversal machining centre; Control: 3D Control Siemens 840D powerline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring system ...

PROFROID GC3/CB2SHS50ZC/C5AH4MD4 12P Brand:PROFROID Type:GC3/CB2SHS50ZC/C5AH4MD4 12P Stock number:M20-1261 Cooling capacity:46 kW Application:Freezing Number of fans:4 Refrigerant:HFC, R404A Voltage:400 Volts Weight:1,750 kg Year:2004 Number in stock:2 piece(s) Price:Quotation request Description: Nice Profroid condensing unit built inside an enclosure, consisting of 2 Copeland piston compressors, condenser, switch box and liquid tank. Mentioned capacity at an evaporating temperature of -30°C and a condensing temperature of +40°C. Visit also our website: used-refrigeration

Diesel filling station - service station - Hoftankstelle - Tankstelle 5,000 litres of content - new to the factory - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey  ...

Service station - Hoftankstelle - Diesel filling station with 5,000 litres capacity, brand new, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings Equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue.  ...

Fuel oil tank diesel tank steel tank tank system with 20,000 litres capacity, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and cleaned professionally and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is re-primed and painted on the outside. L = approx. 6.90 m / D = 2.00 m / weight approx. 4.2 to. / ex works, freely charged. General: The price for the gas station is valid from the Söhrewald plant near Kassel, ...

Watson-Marlow Bredel SPX25 Hose Pump Condition: Unused Shipping weight: 120 kg Dimensions: 100x75x65cm WxLxH Bredel high-performance hose pumps handle abrasive sludge, paste-like materials and slurry with 100% volumetric accuracy. Unlike diaphragm, lobe, and progressive cavity pumps, moving parts do not come into contact with the product and there are no mechanical seals in the pumps. The pumped liquid is entirely contained within a long-lasting hose, preventing the user from coming into contact with chemicals, sludges, and slurries. Each Bredel hose is precision machined to ensure flow stability and pump performance in demanding fluid handling applications.

- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...

Doser, manufacturer unknown, in a good used and functional condition. Dosing machine for liquid, pasty and chunky products. Metal parts made entirely of stainless steel. 50 litre funnels. Filling head height infinitely adjustable. Dosing quantities and filling speed infinitely adjustable, control line for external pulse generators. Pneumatic drive, external compressed air supply 6 bar required. Dimensions B/T/H 130/70/190 cm. Workshop-tested, ready to use. Further on request.

Doser, manufacturer unknown, in a good used and functional condition. Dosing machine for powdery, liquid, pasty and chunky products. Metal parts made entirely of stainless steel. 12 l funnel with screw conveyor. Filling head height infinitely adjustable. Dosing quantities and filling speed can be infinitely variable. Pneumatic drive, external compressed air supply 6 bar and 400 V power connection required. Dimensions B/T/H 120/45/210 cm. Workshop-tested, ready to use. Further on request.

Brand: CFT Model: TE Series Manufacture year: 2002 Production capacity: 15 tn per hour The series has been designed to improve the already superior performance of its predecessors, the MANZINI TE. 15 and TE.30. While preserving the important characteristics of its truncated cone-shaped screen, this new design permits a rapid changeover (without removing the paddles) because the narrow end of the conical screen is at the front of the unit, beneath the cover. The series of turboextractors has a peculiar characteristic: product emulsion due to air trapped within the product. In fact, the infeed of product is located on a completely closed cover and the centrifugal action of the paddles against the conical wall produces an impingement effect in the direction of product flow that helps pomace conveyance towards the expulsion channel. Turboextractors are specifically designed for e ...

P228 - 4x used approx. 50 m³ / 50,000 L polyester tank, GRP tank, aboveground, vertically standing, flat bottom, in good condition. technical details: capacity: approx. 50 m³ / 50,000 litres material: polyester tank / GRP tank manufacturer: Reich-Tank dimensions: Ø approx. 3.00 m × h approx. 7.20 m Used, in good condition, manufactured by Reich company, vertically standing storage tank on flat bottom, lid on the roof, several connections, inlets and outlets. This container can be used as a storage tank for many different media such as water, liquid food, whey, potato steam skins, molasses, manure, seepage juice, rapeseed oil or as a rainwater collection tank, etc. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has al ...

Following separator available for sale. Make: ALFA LAVAL Type: MMPX 403 SGP-11 Serial Number: 4119247 Year: 2002 Product No.: 881099-03-01 Inlet & Outlet: 561312-01 Bowl: 561123-01 Machine Bottom part: 561371-01 Max Speed (Bowl): 9365 r/min Speed Motor Shaft: 3600 r/min HZ: 60 KW: 2.5 Maximum Density of Feed: 1100 kg/cm2 Maximum Density of Sediment: 2631 kg/cm2 Maximum of operating Liquid: 1000 kg/cm2 TEMP: 0/100 Deg.C MOTOR Make: ABB Volt: 380/420/220/240D / 40/480/250/280b HZ: 50/60 AMP: 4.6/8.00 / 4.67/8.00 RPM: 2880/3470 KW: 2.2 /2.5 COS Q: 0.87 / 0.86

Following Separator for sale. Make: Alfa Laval, Made In Italy Type: FOPX 610 TFD 24 Serial Number: 4097640 Year: 1997 Product No.: 881244-03-03 Machine Top Part: 561012-01 Bowl: 554048-04 Machine Bottom Part: 540225-10 Max Speed Bowl: 5148 Speed Motor Shaft: 1800 El. Current Frequency: 60 Recommended Motor Power: 12KW Max. Density of Feed: 1100KG/M3 Max. Density of Sediment: 1350KG/M3 Max. density of Operating Liquid: 1000KG/M3 Process Temperature min/max: 0/100 OC

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

The Brogli plant is designed to produce homogeneous products for the chemical, pharmaceutical, cosmetics or the food industry from powdered and liquid raw products using heat, pressure and mechanical stirring energy. Usable volume 200 litres. Plant incl. 3 feed tanks, vacuum pump, spare parts, etc.