liquid used for sale

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

General SKU245P296 LocationBarneveld MakeIWI GmbH&Co Abfulltechnik KG TypeUnterspiegelabfullanlage Main Features MaterialStainless steel Number of1 heads Specified Features - Liquid filler MaterialStainless steel FillerGravimetric liquid filler Number of filling heads:1 Dosingmax 300 Kg, min 25 Kg Electric capacity230 Volt Inletdia.65mm, out dia.38mm With conveyor belt/ rollerband 670x550mm Mounted on framecheck Information Year of construction1997 Mounted in framecheck With switchcheck With switchgearcheck Floorspace1.1x1,1 M Total height2,0 M Weight450 KG Extra Specificationsfilling head pneumatically and manually adjustable in height, Weighing unit Bizerba ITS, machine no.01551122 with coarse / fine dosingLiquid fillersIWI AbfulltechnikPackaging machines > Liquid fillersBrand > IWI Abfulltechnik What you can expect from Foeth: -- Machine is in working conditi ...

General SKU086W399 MakeFinke GmbH (DE) TypeUnknown Year of constructionUnknown LocationBarneveld Main Features Number of1 heads Specified Features - Liquid filler Fillercheck Number of filling heads:1 Capacity0 till 300 cc Without motorcheck Inlet15mm Mounted on wheelscheck MaterialStainless steel Information With switchcheck Floorspace0.9x0.6 M Total height1.3 MLiquid fillersFinkePackaging machines > Liquid fillersBrand > Finke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU014Y168 MakeCarbo-Fill LocationBarneveld CEcheck TypeCF97-SF Main Features MaterialStainless steel Number of1 heads Specified Features - Liquid filler MaterialStainless steel Fillercheck Number of filling heads:1 Information No.960068 Year of construction1997 With switchgearcheck Floorspace1,1x0,8 M Total height2,1 MLiquid fillersDiscountOmve NetherlandPackaging machines > Liquid fillersDiscountBrand > Omve Netherland What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

AIR LIQUIDE CB MATIC SM 42X43 column and boom was manufactured in 2016 in France by Air Liquide Welding (now Lincoln Electric). The machine, designed for precision circumferential and longitudinal welding, is the perfect solution for companies specialising in the manufacture of, among others, steel structures, pipelines, tanks and wind turbine towers. The welding process is performed fully automatically by means of a welding heads system, which enables the welding of two welds simultaneously on tubes with a maximum diameter of 4000 mm and I-beams with maximum dimensions of 3000 x 800 mm. The use of this solution significantly reduces production time, while maintaining high precision and efficiency at the same time. The CB MATIC SM 42X43 welding boom on offer has a tube welding head for submerged arc welding (SAW) with a range of safety systems, i.e. laser pointers, sensors and a visio ...

Machine type: Submerged arc welding machine Manufacturer: Air Liquide / Oerlikon Type: CPQ170126926 / incl. power source, turn-tilt device, container rotation device Year of Make: 2017 Condition: used / very good, few operating hours Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-AIR-0824 DESCRIPTION We offer you a used UP welding machine from the manufacturer Air Liquide / Oerlikon. - Starmatic 1200i AC/DC - Citowave III / 420 - Posimatic PS15 / Tilt and Tilt Device - Container turning device Weight approx. 7t More detailed dates will follow Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact detail ...

Automatic rotary cup or container filling system for liquids including dosing unit and sealing module for the lidding film. Suitable for products with flow characteristics, various container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Automatic operation from drop cup, filling to sealing. 2 cups / containers will be handled per cycle. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: filling capacity: customized | max. speed of the machine in neutral: 80 cycles/minute | power: 220V / 380V, 2kW | machine dimensions: L1100xW1100xH1600m | weight: approx. 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below t ...

Vertical filling machine for liquids into 3-side-seal- or pillow-bags. Including liquid dosing device (for high viscosity liquids). Twin filling layout for high capacity. Can be linked to CIP system to have an automatic circulating system to guarantee clean feeding pipes. The packaging material is sterilized by UV lights inside the machine to assure a clean environment for the packaging material and the liquid product. Contamination of the liquid product can be reduced during the packaging process to have a longer shelf life. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | suitable for volumes from 200-1000ml | accuracy: +/- 1.5% | max. film width: 320mm | bag width: 100-160mm (depending on pouch type) | bag length: 95-165mm | 0.7m?, 6bar | 380V, 3.9kW | machine dimensions: 1700x1100x2950mm | weight: 720kg. That machine/system is available in different version ...

General SKU212T515 LocationBarneveld MakeBuss-SMS GMBH No.22.11.0519/4 Year of construction1994 Main Features MaterialStainless steel Specified Features - Separator Separatorcheck Capacity225 Ltr. Used onBulk pharmaceuticals (medicine) InletDN 25 Liquid outletDN 25, DN 25 Mounted on stainl. steel framecheck MaterialStainless steel 1.4571 (316Ti) Information Floorspace0.75x0,85 m Total height1.38 m Weight230 kg Extra SpecificationsTÜV operating pressure: -1/3.2 bar test pressure 4.8 bar temperature: -10/200 °C SeparatorsBuss-SMSCentrifuges > SeparatorsBrand > Buss-SMS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T506 LocationBarneveld MakeKuehni TypeDekanter No.D9168 Year of construction2001 Main Features MaterialStainless steel Specified Features - Separator Separatorcheck Capacity430 Ltr. Used onBulk pharmaceuticals (medicine) InletDN40 Liquid outletDN25, DN40 MaterialStainless steel 1.4571 (316Ti) Information Total height1,5 m Weight300 kg Floorspace0,6x1,8 m ATEX compatiblecheck Extra Specificationsoperating pressure: -1/10.0 bar test pressure: 13.0 bar temperature: -10/200 °C. SeparatorsKuehniCentrifuges > SeparatorsBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T535 LocationBarneveld MakeKuehni TypeDekanter No.D 9169 Year of construction2001 Main Features MaterialStainless steel Specified Features - Separator Separatorcheck Capacity430 Ltr. Used onBulk pharmaceuticals (medicine) InletDN40 Liquid outletDN25, DN40 MaterialStainless steel 1.4571 (316Ti) Information Total height1,5 m Weight300 kg Floorspace0,6x1,8 m ATEX compatiblecheck Extra Specificationsoperating pressure: -1/10.0 bar test pressure: 13.0 bar temperature: -10/200 °C. SeparatorsKuehniCentrifuges > SeparatorsBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T494 LocationBarneveld MakeApparatebau AG TypeDekanter No.D 9172 Year of construction2001 Main Features MaterialStainless steel Specified Features - Separator Separatordecanter InletDN 50 Liquid outletDN 40 (2x) MaterialStainless steel 1.4571 (316Ti) Information Total height1,2 m Weight320 kg Floorspace1,9x1 m Extra Specificationsdesign pressure: -1/3,2 bar test pressure: 4,2 bar design temperature -10/200°C volume: 400L SeparatorsApparatebau AGCentrifuges > SeparatorsBrand > Apparatebau AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T500 LocationBarneveld MakeKuehni TypeDekanter No.D 9171 Year of construction2001 Main Features MaterialStainless steel Specified Features - Separator Separatorcheck Capacity400 Ltr. InletDN 40 Liquid outletDN 40 (2x) Mounted on stainl. steel framecheck MaterialStainless steel 1.4571 (316Ti) Information Total height1,1 m Weight270 kg Floorspace1,92x0,7 m Extra Specificationsoperating pressure: -1/3.2 bar test pressure: 4.2 bar temperature: -10/200 °C SeparatorsKuehniCentrifuges > SeparatorsBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU200W001 LocationBarneveld MakeHPV TypeDish LPD liquid processing unit No.1200-0708/2008 Year of construction2008 Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) Information Total height2,6 m Weight3500 kg CEcheck Floorspace6,4x2,35 m Extra Specificationsperfume, aroma, mixing skid The LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of: � ...

Manufacturer: Brand Model: Liquid Handling Station Year of Manufacture: 2020 Type of Machine : Pipetting machine Find more here - / Contact us at -

The Automatic Liquid Filling and Capping Machine by YQ MACHINERY CO LIMITED offers an inline solution for efficient packaging. Designed for easy operation and reliability, this machine is perfect for businesses in the material handling and packing industries, ensuring accurate filling and capping of liquid products. Where It’s Used: Beverage industry (bottled water, soda) Pharmaceuticals (medicine bottles) CBD/hemp oil bottling Cosmetics (shampoo, lotion bottles) Vape e-liquid production

General SKU212T524 MakeGallzeiner LocationBarneveld CEcheck TypeDekanter Main Features MaterialStainless steel Specified Features - Separator Separatorcheck Capacity177 Ltr. (netto: 160 Ltr.) Used onfluid InletDN25 Liquid outletDN25 (3x) Mounted on stainl. steel framecheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information No.8819-M Year of construction2016 Floorspace1,8x0,9 m Total height1,6 m Weight350 kg Extra SpecificationsSuitable for liquid group: 1 Max temp. : 100°C Working pressure: -1/1 Bar Test pressure 1.6 Bar/ 20°C SeparatorsGallzeinerCentrifuges > SeparatorsBrand > Gallzeiner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...

General SKUR0075 LocationBarneveld Main Features MaterialStainless steel Number of1 heads Specified Features - Liquid filler MaterialStainless steel Fillercheck Motor0,55 kW 230/400 Volt (pump), 0,25 kW 230/400 Volt (mixer) Information Makeunknown manufacturer plate is missing Year of constructionunknown With switchgearcheck Floorspace1,4x0,9 M Total height2,0 M Extra SpecificationsThis is a liquid dosing system where a quantity can be filled using a flow meter. The mobile skid contains a tank of 60 Ltr with the dimensions dia 370x630mm with a stirrer. A Suurmond pump with a capacity between 2 and 6 ltr / min with a maximum pressure of 9 bar. An Endress + Hauser (E&:H) Promass flow meter provides the dosage quantity. Liquid fillers-Packaging machines > Liquid fillersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU387U1057 MakeZoatec LocationBarneveld CEcheck TypeProzessbehaelter 600 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume600 Ltr. Motor4 KW Specified Features - Processing vessel MaterialStainless steel 1.4404 (316L) Closed stirring vesselcheck Capacity600 Ltr. (max. 890 Ltr.) Vessel sizes1000x1350 mm Conical bottomcheck Dished top sidecheck With covercheck ManholeDia: 300 mm Top connectionsDN100, DN25, DN40 (2x) OutletDN80 With jacketcheck Half coil jacketedcheck Max. temperature0/100 °C With anchor stirrercheck (with scrapers) Motor4 kW, 220-242/380-420 volt, 1460 rpm Speed mixing shaft117 rpm With homogenisercheck (Zoatec / AZO LIQUIDS: IL2, 160 mm, 600-4000 rpm) Motor18,5 kW Information No.103867-00 Year of construction2013 With swit ...

Cat. No. 12-2665 in a very good condition New price: 10.500€ Measurements and weight: LxHxT: 710 x 430 x 260 mm Weight: 31 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

approx. 70 m³ / 70,000 litres polyester tank, upright standing flat bottomed tank, above ground, with multiple connections and spouts. volume: approx. 70 m³ / 70,000 litres material: polyester / GRP diameter: approx. 3.00 m tank height: approx. 10.00 m overall height: approx. 10.50 m The tank has been newly painted and is in a good condition. The container can be used as a storage tank for liquid feed, whey, molasses, water, slurry, or as rain drip tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offer ...

Tank- & Environmental Protection Wozniack specialist company according to Section 19 Water Budget Act offers as follows. Ladies and gentlemen, we offer a 100,000 litre storage tank for the storage of liquid fertilizer as follows. The storage tank and the kissing inner shell is new. Delivery time about 2 weeks since the inner shell is still manufactured. The storage tank is mounted from the inside with a brand new plastic inner shell, resistant to storage of liquid fertilizer. An acoustic leak detector is mounted outside in a protective box (lockable). The plastic inner shell has a general building inspection approval. And is therefore for the storage of liquid fertilizer AHL and NOX reducing agent AUS32 AdBlue suitable and approved . Rated capacity 100 cbm Piece 1 new The tank is made of steel built Novembe ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 100,000 litres Diameter: approx. 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilize ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 80,000 litres Diameter: approx. 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

AHL Storage Tank Liquid Fertilizer Tank Storage Tank AHL Tank Storage Tank AHL Storage Tank AHL Storage Tank Liquid Fertilizer Tank- & Environmental Protection Wozniack specialist company according to Section 19 Water Budget Act offers as follows. Ladies and gentlemen, we offer a 60,000 litre storage tank for the storage of liquid fertilizer as follows. The storage tank is used and the kissing inner shell is new. Delivery time about 2 weeks since the inner shell is still manufactured. The storage tank is mounted from the inside with a brand new plastic inner shell, resistant to storage of liquid fertilizer. An acoustic leak detector is mounted outside in a protective box (lockable). The plastic inner shell has a general building inspection approval. And is therefore for the storage of liquid fertilizer AHL and NOX reducing agent AUS32 AdBlue suitable and approved ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 60,000 litres Diameter: approx. 2,500 mm Length: approx. 12,680 mm Weight: approx. 10,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 50,000 litres Diameter: approx. 2,500 mm Length: approx. 10,700 mm Weight: approx. 9,200 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer  ...

AHL Storage Tank Liquid Fertilizer Tank Storage Tank AHL Tank Storage Tank AHL Storage Tank AHL Storage Tank Liquid Fertilizer Tank- & Environmental Protection Wozniack specialist company according to Section 19 Water Budget Act offers as follows. Ladies and gentlemen, we offer a 25,000 litre storage tank for the storage of liquid fertilizer as follows. The storage tank is used and the kissing inner shell is new. Delivery time about 2 weeks since the inner shell is still manufactured. The storage tank is mounted from the inside with a brand new plastic inner shell, resistant to storage of liquid fertilizer. An acoustic leak detector is mounted outside in a protective box (lockable). The plastic inner shell has a general building inspection approval. And is therefore for the storage of liquid fertilizer AHL and NOX reducing agent AUS32 AdBlue suitable and approved ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 40,000 litres Diameter: approx. 2,500 mm Length: approx. 8,720 mm Weight: approx. 7,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Electric driven scraped filter tubular sieve insert and 6 internal stainless steel scraperblades. Sieveinserts of 0.4 and 2 mm available, more models on request. Sieve dimensions: diameter 300 mm, length 650 mm, ±0. 61 m² sieve surface, Siveinsert can be changed easily. Pipe connection DN80, DIN 11851 Joints. CIP cleanable. Fully overhauled,as new condition.

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 30,000 litres Diameter: approx. 2,000 mm Length: approx. 9,940 mm Weight: approx. 5,500 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Electro-mechanical scale for liquids, with Hottinger load cell, pressure control valve, pneumatic outlet valve and solenoid valve. In support frame with feet.

Cabinet to store chemical /flammable liquids Justrite Model 25302 Year 2000 Dimensions Width=109cm Depth=45cm Height=114cm Capacity 113 liter Details With self closing doors Available direct

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 25,000 litres Diameter: approx. 2,000 mm Length: approx. 8,390 mm Weight: approx. 4,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Storage tank storage tanks of liquid fertilizer AHL / ASL tank - containers - fertilizer warehouse 1. used storage containers AHL tank ASL tank liquid fertilizer tank 30,000 litres. The tank complies with the DIN of 6616, owns 2 caliper feet, is empty inside and out and cleaned, incl. ladder. D = 2.50 m - L = approx. 6.80 m. The container receives incl. leak detector in the protection box mounted a new plastic inner sleeve - resistant storage of liquid fertilizer -. The plastic inner sleeve has a "General Building Inspectorate approval" Z-65.30-466 and makes suitable and approved for the storage of liquid fertilizer AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex-works - free charged.

Vials filler for inyectables with weight dosing filler and stoppering Output 3.000 vials/h Size range diameter 16 mm / max. 80 mm – height min. 55 mm / max. 200 mm The fill range is 1 up to 1.000 ml with 4 needles Electrical supply 220/380 V 50 Hz Weight 1350 Kg. The machine include a turning table and rabs

P187 - 3x used approx. 43 m³ / 43,000 litres polyester tank, GRP-tank, aboveground, vertically standing, flat floor, in good condition. technical details: capacity: approx. 43 m³ / 43,000 litres material: polyester tank / GRP tank manufacturer: Skoda dimensions: Ø approx. 3.00 m x height approx. 6.50 m Used tanks in good condition, by manufacturer Skoda. Upright standing storage tank with flat bottom, lid on the tank body, multiple connections, inlets and outlets. One tank is equipped with a propeller agitator on the side, functionality not yet tested by us. The container can be used as a storage tank for many different media such as water, liquid feed, fodder, whey, molasses, manure, seeping juice, rapeseed oil or as a rainwater collection tank etc. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisem ...

Monobloc filling and sealing machine incl. feeding turn table Filling range 5-30ml Container sizes D.20-35 - H.50-80mm Capacity max. 15-30 pcs. / min.

40m3 storage tank for AHL/ASL - steel tank used storage container 40,000 litres capacity for storage of liquid fertilizer / AHL / ASL with brand-new plastic inner shell The container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is professionally emptied and cleaned inside. D = 2.50 m - L = approx. 8.70 m. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The container is completely ground on the outside, re-primed and repainted in desired colour according to RAL. The price is ex works - freely charged. Delivery time = by arrangement.  ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 20,000 litres Diameter: approx. 2,000 mm Length: approx. 6,840 mm Weight: approx. 4,000 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

The machines and lines of the SFM series are designed for processing nested containers such disposable syringes. The dosing station is designed to process liquid products using rotary piston pumps. Depending on machine type and equipment, nests are supplied manually or fully automatically. Filling and closing are always fully automatic. The machines are also designed for vacuum-assisted dosing and insertion of plunger stoppers. This virtually eliminates entrapped air when filling disposable syringes with pharmaceutical product

GRONINGER LIQUID FILLING LINE FILLING AND CLOSING MACHINE DFVK 6000 - STOPPERING MACHINE KVK 108B Anno di costruzione: 2002 Output: 12,000 per hour (200 per min), based on 3ml vial, 1ml fill Filling range: 0,2 ml- 135 ml (equipped with according pumps) Diameter range: 14-35 mm Height: 30-100 mm PLC: Siemens PLC type S7 300 Guarding: Stainless steel frame with safety glass The vial filling and closing line is capable of running in the following ways: - Fill and half-stopper a batch for freeze-drying - Overseal a stoppered batch from after freeze drying process - Fill, stopper and overseal a liquid batch Line under ORABS - Open Restricted Access Barrier System​. Full set of operation manuals and technical documentation. Various spare parts.

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

The brand new container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is primed on the outside - on untreated sheets. D = 2.50 m - L = approx. 10.70 m. The container receives a brand new plastic inner shell incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The price is ex works - freely charged. We recommend: Above containers sandblasting from the outside, prime and completely repaint - iron grey / RAL hue. (On request, other RAL colours are also possible!) ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. ASL container  ...

Used SB Machines LZ1-CIP liquid filling line. New 2020. The line includes: 1. LZ1-CIP filling line – This machine is designed for the automatic filling of milk and other liquid products. For filling products with capacities of: 250 ml, 500 ml, 1 L 2. ECA-08 label applicator – for applying single labels to cylindrical containers such as bottles and plastic containers. The label applicator uses paper labels. Manufacturer: Świdnik Trade Year of manufacture: 2016 Power supply: 220/380V, 10A Capacity: 0 ± 6000 units/hour Container diameter: min. Ø 50mm; max. Ø 100mm 3. Automatic wrapping machine – The machine is designed to arrange bottles delivered by a conveyor into packs of 6 or 8 pieces (in two rows), then wrap them in heat-shrink film and move them to a shrink tunnel. Manufacturer: Drewmet s.c. Power supply: 400V, 50Hz Capacity: 0 ± 3000 pcs/h Package dia ...

Used storage tanks VARIBOX - 1.000 L - double-walled - with plug-in system and recesses for forklifts - Capacity: 1,000 L -Plastic - tested and cleaned - for diesel, oil or other liquids Discount possible for higher quantities. Inspection and shipping costs after consultation.

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Collecting pan, floor pan, collecting container, flat steel pan, collecting pan for coolant liquid -Collecting tray: for chips with coolant liquid, 1200 x 800 mm -Trough height: 400 mm, can be shortened -Rectangular cutout: 420 x 215 mm -Dimensions: 1200/800 / H400 mm -Weight: 10 kg

Since we have focused our -fischer organics- laboratory service more on peptides / HRMS, we would like to hand over our SFC. The system has the complete equipment, The original price in 2012 was over 250,000 euros net! - Mass detector QDa - Backing pump RE6 - Acquity PDA detector - Acquity Pillar Manager - Acquity Binary Pump 1000bar - Acquity Autosampler - Isocratic UPLC pump - Convergence Manager