libra used for sale

1 LIBA type COP 2 HS, width 170", gauge 28, year 1980, with PROKOSTOP 4044 1 LIBA type COP 2 HS, width 170", gauge 24, year 1980, with PROKOSTOP 4044

The depacker enables the unpacking of bottles from the shrink film. PLC SIEMENS S7-300. Output: up to 4 bundles/min.

• For vials/bottles diam. 16-78 mm, height max. 220 mm, output max. 350 objects/min • Label length 15 - 200 mm, height 10-100 mm, label roll diam. max. 400 mm • Hot printing device Graseby Allen • Operation from left to right • Dispensing table adjustable in height, depth across direction, inclinaton across direction • Code reading Laetus Argus 6 • Bad discharge in scrap tray by air nozzle • Separating screw for vial diam. 24 mm, height 40 mm • Counter, control for feeding rotary table (rotary table not attached) • PLC Siemens S5-95U • Electr. connection 400V/50Hz This machine is offered at a special price and sold as-is without technical inspection.

These are 21x21 inch and 30x42 inch warp beams, for direct warping and knitting mills. With documentation, without accessories. No defects known, last overhauled. An on-site inspection is possible.

We sell 1 x Quantum i6k Tape Library 10 x LTO5 HP: DRV ASM, HP LTO5, UDS3, DUAL FC 8-00603-01 14 x LTO7 IBM: DRV ASM, IBM LTO7, DUAL FC 8-01434-01 The library has 1400 slots. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices fr ...

Fly trap FUTURA Liberator, nameplate not visible, 230 V, hanging at a height of approx. 250 cm

Counting scales, scales, parcel scales, weighing platform without terminal -Weighing platform without: evaluation device for scales -Weighing range: min.0.02 kg -Weighing range: max. 12 kg -Number: 1x available -Dimensions: 330/235/H90 mm -Own weight: 4.7 kg

max: 1500 KG min: 10 KG serial number: CO13136LG documentation: keine : 30 € The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max 500kg, year of construction 1955, platform size 73x57cm, total size approximately 120x70x190cm. Auction-ID: A1-45188-184

Capacity 30 Kg, division 0.5 gr, plate: 300x230mm. Estimated weight: 10 kg Approximate dimensions: 400x300x 200h mm Auction-ID: A7-44996-101

New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2025, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On reques ...

New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2025, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On reques ...

New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2025, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On reques ...

New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2025, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On reques ...

Fully Automatic Stretch Film Packaging Machine with Scale & Labeler Packing Plant / Wrapper + Labeler Fabbri Group ELIXA 35 / Libra-B.285.ESP Among Elixa automatic stretch wrapping machines, the Elixa 35 is the most powerful model in terms of speed (35 ppm). Like all the machines in the range, the Elixa 35 is a compact stretch packaging machine designed by the Fabbri Group specifically for particularly small workspaces and retail outlets. Elixa 35 can package any food that is compatible with stretch film and technology. Neutral or printed films with continuous printing are used, which offer more possibilities for communication and branding on the package. It delivers the best results when combined with Fabbri Group stretch films, but also offers excellent performance with food films from all major manufacturers on the market, achieving unparalleled packaging aesthetics.  ...

Caffini libellula This Caffini water pump with 400 V electric motor is often used in construction industry, municipalities, civil engineering. The Caffini libellula diaphragm pumps have always been highly appreciated by their users in the construction and public works sector. The ability to run dry allows the operator to keep the ditch dry, even when it contains mud and suspended solids., Max yield : 20 m³/h, Max head : 16 mWK, , Available with any connection you require, , Throughput capacity: 20 m3/h, Max. head: 16 MWK, Weight: 100 kg, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Empty weight: 100 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = D ...

HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module,  ...

Type: Elixa 35 Libra Year of construction 2017 Capacity up to 35 packs per minute - Automatic shell detection - Automatic weighing system - Film type: • PVC or PE stretch film • Film width 280 mm Machine is in very good condition. Is dismantled and can be visited in Leipzig.

Key data: 1100 , 1 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Combi unit TC with: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness - Hard sanding shoe (density 0.68) with graphite coating and decimal correction of grain/strip thickness - Switching the sanding shoe on and off from the control panel via pneumatic cylinders. Decimal setting position sanding shoe the grain size/strip thickness - AUTOMATIC CARPET CENTERING

Key data: 1100 , 2 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...

GENERAL Project No.: 905814 Quantity: 1 pcs. Manufacturer: FANUC Type: Robodrill alpha-D21 LiB5 Control: Fanuc 31i B5 Year of Make: 2019 Condition: Used machine Approx (hrs): 7778 Spindle one approx. (hrs.): 1819 MILLING Travel in X 700 mm Travel in Y 400 mm Travel in Z 330 mm Max. rapid traverse speed in X/Y/Z 54/54/54 m/min Max. feed speed in X/Y/Z 30/30/30 m/min Max. acceleration in X/Y/Z 1.4/1.0/1.6 m/s2 Tool holder BT 30 Max. speed milling spindle 10000 1/min Max. power at ED 10-40/100% 26/5.5 kW Max. torque at ED 10-40/100% 35/7.5 Nm Disc tool magazine 21 stations Max. tool diameter 80 mm Max. tool length 250 mm Max. tool weight 3 kg Tool change time 1.6 s Machine table 850 x 410 mm OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Oil/Emulsion Mist Extraction System Chip conveyor  ...

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

x-travel: unbek. mm y-travel: unbek. mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine spirit level, block spirit level, frame spirit level, spirit level, precision spirit level, frame spirit level -Machine spirit level: frame spirit level -Frame size: 150 x 30 mm -Reading: 0.3 mm/m -Dimensions box: 195/195/H55 mm -Weight: 1.7 kg

Key data: 1350 , 3 , 160

Wide belt sanding machine 3 sanding belts 1370 x 2150 mm 2 Main engines

Key data: 950 , 1 , 160

Ce execution V. 400/50 Electronic table positioning Automatic carpet centering Grinding width 950 mm Combi unit Table extension rear and front

Key data: 1350 , 2 , 160

Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging

A Peddinghaus cutting and notching system for mitre cutting and weld bevel preparation is available. The main component of the system is the CNC 5-axis notching machine Peddinghaus SACM-1250/A, year of manufacture: 2019. The system is suitable for small to medium-sized steel construction. Intended use: Standard notching, flange thinning, web openings and other common notching shapes. Documentation available. On-site inspection is possible.

General SKU347W896 LocationBarneveld MakeLibra TypeSensitive 300A Mach.No.300.91.122 Main Features MaterialStainless steel Motor1 KW Specified Features - Miscellaneous MaterialStainless steel CapacityOutput max 300 pc/min Motor1 kW, 220 volt Information Year of construction1991 Total height2,30 m Floor space1,20x1,05 m Weight420 kg Extra SpecificationsLabeling machine, with roll holder. ajustable height travel 10-120 mm. MiscellaneousIMA ItalyMiscellaneous > MiscellaneousBrand > IMA Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Grinding width 1350 mm CE version V400/50 50 Hz Viewing window for the aggregates LED interior lighting Y version for RTC - Pneumatic on/off switch for the roller of the first unit ? R? - Pneumatic on/off switch for the roller of the second comb belt ? TC? - Split elastic and electronic sanding pad (56 graduation) - Electronic thickness adjuster SMART CONTROL S electronic control 10-inch color LCD touchscreen Motor power 15 kW

Grinding width 1350 mm CE VERSION V400/50 50-Hz Side viewing windows for the grinding units  LED Interior Lighting Vacuum table with 4 kW fan fan Infeed and outfeed roller table for long workpieces Tynex structuring unit at the outlet 5.5 kw Structuring brush K46 and pressure roller at the outlet Z-version for RRTC 135 - Pneumatic roller on/off on the calibration unit with steel roller - Pneumatic roller on/off on the fine grinding roller  - Pneumatic roller on/off on the TC combination unit - Electronic semented sanding shoe (56mm pitch) - Electronic

Grinding width 950 mm Ce version V400/50 1 belt combi unit design Steel roller for calibration  Grinding bug selection from the control panel Sanding shoe selection from the control panel  Sanding Pad Control On/Off FOX500KRT Electronic table positioning from the grinding table  Entrance and exit table extensions Moving carpet centering 

Grinding width 950 mm  Steel roller for calibration  1 belt combi unit design Ce Version V 400/50 Entrance and exit table extensions Moving carpet centering  Automatic electronic operation control

Grinding width 1350 mm CE version V400/50 50 Hz Viewing window for visual access to the units LED lighting for indoor lighting Vacuum table with 3 kW electric fan Tynex Texturing Brush with Tynex Brush K46 Y-type - Pneumatic on/off for the roller of the first unit ? R? - Pneumatic on/off for the roller 2nd abrasive belt roller combination unit TC - Elastic electronic sanding shoe (56 graduation) - Electronic thickness adjuster FOX 1000S electronic control 10.4 inch touch screen 15 kW motor power 1-motor version

Varian Saturn 2100 T GC/MS system, used Ion trap with Turbo molecular pump Measurement range: 10-650 amu EGG Varian DS 102 backing vacuum pump complete with PC, LCD monitor, and software as well as NIST library Option autosampler: Varian 8400,CTC GC PAL or CTC PAL wagon

Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed for durability. It offers reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides precise and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially with extensive inventories. Low operating costs Because Vulcan is a laser device, employees don't have to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military standards for robustness (MIL-STD-810G). It also comes with a 3-year warranty. Prove ...

Libra / labeler Bizerba GV 7000, built 1999, in a very good used and functional condition. Fully automatic scale with labeler / price printer, programable, feed and feed belt. Dimensions W/D/H 260/65/170 cm. Operating voltage 230 volts, compressed air connection 6 bar required. Workshop-tested, ready for immediate use. More on request.

Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed to last. It provides reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides accurate and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially for extensive inventories. Low operating costs Because Vulcan is a laser device, employees do not need to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military ruggedness standards (MIL-STD-810G). It also comes with a 3-year warranty. Proven It is ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

We sell 12 x IBM LTO7 FH FC 8-01434-01 tape drives for Quantum Scalar libraries In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refur ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OE 1,5kW / VF1530-1500W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 40000mm/min - Maximum acceleration: 0.5G - Maximum load: 1200kg - Nominal power: 1.5kW - Energy requirements: 12.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 4500mm - Width: 2300mm - Height: 1920mm Cutting thickness - Carbon steel: Recommended thickness 12.0mm, maximum thickness 16.0mm - Stainless steel: Recommended thickness 5.0mm, maximum thickness 6.0mm - Aluminum: Recommended thickness 3.0mm, maximum thickness 4.0mm - Brass: recommended thickness 2.0mm, maximum thickness 3.0m ...

GERBER Cutter Z7 automatic cutting machine was built in 2016 in China by Gerber Technology (Lectra). The machine is used in the production of clothing and all sewing products. It can cut both single and multi-layered fabrics with a maximum thickness of 7.2 cm (after compression). Cutting is performed by means of a robust, vertical oscillating knife, which ensures the highest cutting precision and shape repeatability regardless of the type of material. The advanced Knife Intelligence Plus” system controls the movement of the knife, changing its angle, cutting path and acceleration in real time to ensure precise cutting of repeatable parts for all layers every time. Cutting paths are additionally optimised by the SMARTbite system, which automatically adjusts the knife advance speed based on the height and type of overlap. The oscillating knife is continuously sharpened during cutting, ...

Optical Emission Spectrometers (OES) are characterized by the fact that they provide complete chemical analysis, even of critical alloying elements at low detection limits, which handheld XRF and LIBS devices cannot achieve: carbon, phosphorus, sulfur, boron, arsenic and tin in low-alloy, stainless steels and nitrogen in duplex steels. For this reason, spark spectrometry is the world's most reliable and widely used method for creating and verifying MTR's (Mill Testing Reports). Our instruments also meet the world's most stringent PMI testing requirements for metallurgical alloy chemistry, including API 5L testing, API RP578, ASME Section IX B& PV, ISO 17025 and A2LA standards.

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. Th ...

Fiber Showroom Machine - FIBERLASER Model Series HLF Power: 6kW Sheet size: 3000 x 1500mm Changing table Siemens touchscreen control with LAN/USB Siemens Drives Tsubaki conveyor belt for small parts automatic sheet metal layer measurement Precitec Auto Focus Procutter Cutting Head IPG Resonator YLS with 6kW Will include: Warranty CAD CAM Software Libellula[CUT] Commissioning Delivery within Germany Training offered Other sizes / power levels up to 15kW are available at short notice. We are trading house and service provider in Germany for YAWEI machines for more than 15 years. All training / services / spare parts deliveries are handled by us. In our showroom, YAWEI fiber lasers and press brakes can always be tested under power.

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6035 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable th ...