We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,597 used machines on RESALE, but how to find them? Machine Search
used
Description: 10 x Wall lamp 6W LED up/down - IP54 waterproof -3500K warm white (SW-34) black - COB LED - 500 lumen - size 280 x 100 x 100 mm - material aluminum - voltage 220-240V/ 50-60Hz - lifespan 30,000 hours - confirmation included - lamp included - suitable for indoor and outdoor use. Approx. Onsite Dimension. (l x w x h): 570 x 240 x 330 mm, weight approx.: 15 kg
used
Description: 10 x Garden lamp - 10W LED - warm white - 60 cm - lumen 1000 - model number (SLA-53) - black - length 60 cm - waterproof value IP54 - Material Aluminum - dimensions. 600 mm x 150 mm x 50 mm - color temperature: warm white 3000K -- voltage 85-265V 50/60Hz - lamp included - suitable for outdoor use. Approx. Onsite Dimension. (l x w x h): 620 x 480 x 640 mm, weight approx.: 18 kg
used
Description: 30 x Garden lamp - 10W LED - warm white - 60 cm - lumen 1000 - model number (SLA-53) - black - length 60 cm - waterproof value IP54 - Material Aluminum - dimensions. 600 mm x 150 mm x 50 mm - color temperature: warm white 3000K -- voltage 85-265V 50/60Hz - lamp included - suitable for outdoor use. Approx. Onsite Dimension. (l x w x h): 1,240 x 600 x 640 mm, weight approx.: 36 kg
used
Description: 100 x LED Panel - Round - 8W Recessed 3000K (warm white) - 640 Lumen - IP20 - AC110-240V - Lifespan: 30,000 hours - LED SMD - LED Driver included - Dimensions: 110mm x 30mm - Mounting diameter: 100mm - Beam angle: 120 degrees Approx. Onsite Dimension. (l x w x h): 500 x 600 x 400 mm, weight approx.: 25 kg
used
Description: Recessed panel 5W LED SMD round 3000K (warm white) - 400 lumen - AC220-240V - lifespan of 30,000 hours -Including LED driver - Dim. 85mm x 20mm - installation size 70mm - beam angle: 120 degrees. Approx. Onsite Dimension. (l x w x h): 1,180 x 660 x 310 mm, weight approx.: 51 kg
used
Description: 100 x LED Panel - Round - 8W Recessed 6500K (daylight) - 640 Lumen - IP20 - AC110-240V - Lifespan: 30,000 hours - LED SMD - LED Driver included - Dimensions: 110mm x 30mm - Mounting diameter: 100mm - Beam angle: 120 degrees Approx. Onsite Dimension. (l x w x h): 500 x 600 x 400 mm, weight approx.: 25 kg
used
Description: Recessed Panel 30W LED COB round 3000K warm white - 2600 lumen - dim. 300mm x 32mm - LED SMD (AC220-240V) - LED driver included - lifespan 30,000 hours - beam angle: 120 degrees. Approx. Onsite Dimension. (l x w x h): 780 x 1,440 x 1,040 mm, weight approx.: 158 kg
used
Description: 10 x Wall lamp 12W LED - IP54 waterproof - 3500K warm white (SAW-05) black - COB LED - 1000 lumen - size 260 x 125 x 125mm - material aluminum - voltage 220-240V/ 50-60Hz - lifespan 30,000 hours - mounting included - lamp included - suitable for indoor and outdoor use. Approx. Onsite Dimension. (l x w x h): 720 x 300 x 300 mm, weight approx.: 9 kg
used
Description: Recessed panel 5W LED SMD round 6500K (cold white) - 400 lumen - AC220-240V - lifespan of 30,000 hours -Including LED driver - Dim. 85mm x 20mm - installation size 70mm - beam angle: 120 degrees. Approx. Onsite Dimension. (l x w x h): 1,180 x 660 x 620 mm, weight approx.: 102 kg
used
Description: Recessed Panel 15W LED COB round 3000K warm white - 1350 lumen - dim. 180mm x 32mm - LED SMD (AC220-240V) 50 / 60Hz - LED driver included - lifespan 30,000 hours - beam angle: 120 degrees. Approx. Onsite Dimension. (l x w x h): 730 x 360 x 1,200 mm, weight approx.: 70 kg
used
Description: 10 x Wall lamp 12W LED - IP54 waterproof - 3500K warm white (SAW-02) black - COB LED - 1000 lumen - size 260 x 135 x 115 mm - material aluminum - voltage 220-240V/ 50-60Hz - lifespan 30,000 hours - confirmation included - lamp included - suitable for indoor and outdoor use. Approx. Onsite Dimension. (l x w x h): 720 x 300 x 300 mm, weight approx.: 8 kg
used
Description: Recessed Panel 15W LED COB round 6500K cold white - 1350 lumen - dim. 180mm x 32mm - LED SMD (AC220-240V) 50 / 60Hz - LED driver included - lifespan 30,000 hours - beam angle: 120 degrees. Approx. Onsite Dimension. (l x w x h): 730 x 360 x 1,200 mm, weight approx.: 70 kg
used
Description: 30 x LED Panel - Round - 30W - Surface-mounted - Frame color: white - 6500K (cold white) - Dimensions: 280mm x 28mm - LED SMD - (AC220-240V) - LED Driver included - Lifespan: 30,000 hours - Beam angle: 120 degrees - included mounting kit Approx. Onsite Dimension. (l x w x h): 350 x 700 x 400 mm, weight approx.: 30 kg
used
Description: 30 x LED Panel - Round - 30W - Surface-mounted - Frame color: white - 3000K (warm white) - Dimensions: 280mm x 28mm - LED SMD - (AC220-240V) - LED Driver included - Lifespan: 30,000 hours - Beam angle: 120 degrees - included mounting kit Approx. Onsite Dimension. (l x w x h): 350 x 700 x 400 mm, weight approx.: 30 kg
used
Description: 80 x Surface panel 18W LED SMD round - 6500K (cold white) - 1530 lumen - Dim. 225mm x 32mm - (AC220-240V) -Includes LED SMD driver - lifespan of 30,000 hours - beam angle: 120 degrees - including wall mounting. Approx. Onsite Dimension. (l x w x h): 1,220 x 940 x 480 mm, weight approx.: 110 kg
used
Description: 80 x Surface panel 18W LED SMD square - 6500K (cold white) - 1530 lumen - Dim. 211mm x 28mm - (AC220-240V)50/60Hz -Including LED driver - lifespan 30,000 hours - beam angle: 120 degrees - including wall mounting. Approx. Onsite Dimension. (l x w x h): 1,220 x 940 x 1,440 mm, weight approx.: 330 kg
used
Description: 30 x LED Panel - Round - 30W - Surface-mounted - Frame color: black - 3000K (warm white) - Dimensions: 280mm x 28mm - LED SMD - (AC220-240V) - LED Driver included - Lifespan: 30,000 hours - Beam angle: 120 degrees - included mounting kit Approx. Onsite Dimension. (l x w x h): 350 x 700 x 400 mm, weight approx.: 30 kg
used
Description: 25 x Street light 200W - SMD LED waterproof IP65 - 6500K/white, Diameter 545mm 237mm 71mm, SMD LED - voltage 85-265V 50/60Hz, 20,000 Lumen, lifetime 30,000 hours, Fixing diameter: Ø60mm, Mounting kit no included, Beam angle: 120 degrees with lens, Suitable for Indoor and outdoor. Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 1,100 mm, weight approx.: 50 kg
used
Description: The machine light is splash-proof with an integrated transformer Lamp housing dimensions: 120mm diameter and 115mm Lamp base dimensions: 30 x 60 mm. Illuminant 9 LED pcs. Supply voltage 230 V Load 9 Watt Arm length 300 mm Approx. Onsite Dimension. (l x w x h): 350 x 200 x 150 mm, weight approx.: 8 kg
used
Description: The machine light is splash-proof with an integrated transformer Lamp housing dimensions: 120mm diameter and 115mm Lamp base dimensions: 30 x 60 mm. Illuminant 9 LED pcs. Supply voltage 230 V Load 9 Watt Arm length 300 mm Approx. Onsite Dimension. (l x w x h): 350 x 200 x 150 mm, weight approx.: 8 kg
used
Description: LED machine lights 230Volt / 12Watt With screw-on base and lockable joint. see pictures Approx. Onsite Dimension. (l x w x h): 300 x 200 x 200 mm, weight approx.: 7,5 kg
used
description: Limited opportunity! For sale are approx. 100 pcs. LED floodlights. Perfectly suitable for production halls / warehouses. The lamps were purchased approx. 2016 and have run approx. 35.000h since then. The manufacturer has stated that the lamps have run 80.000h, before the lighting effect can decrease. The new price was at that time after discount blow 400 / pc plus installation. The reason for the high price is also the advantage of a component system. Unlike many other systems, this one is replaceable / repairable. LED/system power 120/135W; luminous flux 14.400 lumen; beam angle 120°; input voltage 100-240VAC 50/60Hz. All information without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhau ...
used
Serial No.: 1704 Punching capacity: Ø 28 x 16 Available with special tools: Ø 100 x 4 Year of construction: 1997 Country of origin: Italy
used
Description: Piston Compressor POLE POSITION 221 CE ITALIA Serial number 767416 Power 1.5 hp Approx. Onsite Dimension. (l x w x h): 700 x 350 x 700 mm, weight approx.: 10 kg
used
manual casemaker CMC Q-cover 1 (similar to LPA 50-110) format: max 50x110cm; min. 12x15 cm Machine comprising of: - Gluer for hot and cold glue (PVA) - Vacuumtable with board guides for 1-3 cardboards (up to 5 as option) - Turning in unit (1 side) - Roller press - Delivery table
used
Attachment: Chamber filter press-neuwertig demonstrator Hours of operation: No Design: page Holm led Filter plate format: 250 x 250 mm Number of plates: 8 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: 0.56 m m² Presses contents: approx. 7 dm3 PCB package length: 379,2 mm Filter pressure: 15 PSI Plate transport: manually Product-contacting parts: PP + stainless steel Dimensions: Lxwxh approx. 960 x 400 x 360 mm Weight: 350 kg Pumps: optional Purchase or rent: Tours of the facilities in consultation with us to work. Added: multiple attachments are there about End of April available. Order please, because the demand is very high. You want to rent this facility or to buy? Contact us, we are available.
used
Attachment: Chamber filter press - as good as new, demonstrator Hours of operation: No Usage area: Chamber filter press, pilot plant, wine press Design: page Holm led Filter plate format: 390 x 390 mm Plate number: 14 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 2.8 m sq Presses contents: approx. 35 dm3 PCB package length: 391 mm Filter pressure: 15 PSI Plate transport: manually Frame: Steel Product-contacting parts: PP + stainless steel Dimensions: Lxwxh approx. 1695 x 750 x 630 mm Weight: 610 kg (photo identical plant) Pumps: optional Purchase or rent: Tours of the facilities in consultation with us to work. Added: multiple attachments are there about End of April available. Order please, because the demand is very high. You want to rent this facility or to buy? Contact us, we are available.
used
Attachment: Chamber filter press - as good as new, demonstrator Type: REWA auto-hydraulic-Tigo3 quick-opening system Model: automatic Chamber filter press with quick draining execution: zero - man operation possible Hours of operation: No Design: page Holm led Filter plates sizes: 1000 x 1000 mm Plate number: 60 Filter plates: PP Thickness: 30 mm Filter cloths: optionally available in voting on the medium Schedule: closed Filter surface: 100 m square Presses capacity: approximately 1480 dm3 PCB package length: 3624 mm Filter pressure: 15 PSI Plate transport: automatically Frame: Steel Q235 Product-contacting parts: PP + stainless steel Dimensions: Lxwxh approx. 12200 x 1500 x 1360 mm Weight: 4000 kg Pumps: optional Purchase or rent: Tours of the facilities in consultation with us to work. Added: multiple attachments are there about End of April available. Order please, because the demand ...
used
Attachment: Chamber filter press used semi mobile Model: pilot plant on platform mounted Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 20 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Filter surface: approx. 4.72 m m² Presses contents: approx. 56 dm m³ PCB package length: 1024 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Pumps: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Condition: It is a complete semi-mobile system on platform mounted, incl. control cabinet as full drainage system. This compact drainage system is easy to transport and can be taken in a very short time in operation. Appendix: Selling without trailer You want to rent this fac ...
used
Attachment: Chamber filter press used Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 30 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Procedure: open Open filter surface: approx. 7.5 m square Presses contents: approx. 90 dm m³ PCB package length: approx. 1512 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Hydraulic pump: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Safety equipment: optional Optional accessories: optional possible depending on design Extensions: In consultation according to the design Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delive ...
used
Attachment: Chamber filter press used Usage area: Chamber filter press, pilot plant Design: page Holm led Filter plate format: 400 x 400 mm Plate number: 15 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.0 m square Presses contents: approx. 37 dm3 PCB package length: 700 mm Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available.
used
Attachment: Chamber filter press used Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 26 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 9.7 m m² Presses contents: approx. 130 dm3 PCB package length: 1500 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Dimensions: Lxwxh Empty weight: Accessories: depending on the type and customer Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delivery. On these systems, we guarantee between 6 to 12 months. Condition: The plant is located in a very good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility ...
used
REWA 470 / 27 Product no.: RE-HU-2015-0801-1 Equipment: refurbished dewatering equipment Type: Chamber filter press 470/27 with high pressure piston diaphragm Abel Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 27 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 10.1 m ² Presses contents: approx. 135 dm3 PCB package length: 1600 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Pumps: Abel piston diaphragm high pressure pump Accessories: depending on the type and customer Extra services: On this complex guarantee months between 6-12. Condition: The system is in good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility or to buy? Contact ...
used
Italian top make, control Grundig manual-plus V 260, very robust machine! Top width 1500 mm maximum swing over bed 625 mm Spindle bore 105 mm Taper MK 5
used
manual casemaker CMC LPA (machine like CMC Q-cover 1) format: max 50x70cm; min. 12x15 cm Machine comprising of: - Gluer suitable for use of warm and coldglue (PVA) - Vacuumtable with spotting guides for 1-3 boards - Edge turning in device (1 side) - Niproller press - Delivery table machine is reconditioned in 2016 Available: immediately/sofort
used
MSE 470/10 Product no.: RE-HU-2014-0412-1 Attachment: Chamber filter press, drip sealing used Usage area: Chamber filter press Design: page Holm led Year of construction: 2002 Filter plate format: 470 x 470 mm Number of plates: 10 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.3 m ² Presses contents: approx. 48 dm3 Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available. There are two identical facilities are available.
used
Ruhle Tumbler MKR 130, with vacuum, scraping arm, container size 130 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. The machine is currently in the refurbishing and will be available soon. It can be tested in Koblenz, Germany.
used
I ´ checker advanced type DC70A Technical data: Supply voltage: 18... 26, 4 VDC Power consumption: max 37 Operating temperature: - 20-85 ° C Measuring range: 70A(DC) Accuracy: < 2% typical < 3% Max Protection class: IP20 Mounting: DIN rail -Suitable for DC and AC -RS 485 bus connection via RJ45 -Hutschienenmontange LED indicator -Optical failure Price per piece 50.00 29 STK. in stock
used
Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...
used
Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...
new
Specifications / Technical data S-1400/T 3-axis CNC-portal-machine and engraving machine (Attention: Pictures show the High-Z S-1400 with trapezoidal thread spindles, this differs exclusively by the spindles . With the T-variant of the high-Z CNC fraes machine, you acquire old-fashioned technology with the certain I-meat in TUeV-certified quality (EMC). The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T portalfraes machine achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can s ...
used
Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.
used
Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on ...
used
Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...
used
Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...
new
production capacity up to 5.000 bottles/cans/h 0,5 L; submersible-shower type automatic; alarm system; for glass bottles, tins and cans; equipped with Italian and German component parts; made from stainless steel;
used
Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine with TÜV certification With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the ...
used
Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional emergency stop you fin ...
used
Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...
used
Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent (optional WIN PCNC Economy, USB or professional). If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional ...