laser cutting used for sale

ALPHA LASER ALM 300 laser welding machine was built in 2019 in Germany by ALPHA LASER GmbH. The machine is used for the precision welding of workpieces that require high accuracy, i.e. moulds, dies, tools and machine parts. The process involves spot fusing of the material by means of a concentrated laser beam with high energy density. This solution makes it possible to obtain highly accurate and robust welds with reduced thermal distortion at the same time. ALPHA LASER ALM 300 is equipped with a movable work head, which enables convenient operation even in hard-to-reach areas of the workpiece. The operator controls its position in the X,Y,Z axis by means of a joystick located on the machine arm. The welding process parameters are entered from the membrane keyboard panel or by means of a multifunctional foot switch control. The ALPHA LASER ALM laser beam welding machine weighs approxim ...

Metal 3D Printing Concept Laser for sale, second hand. The operating hours amount to approximately 10,000, of which a maximum of 1,000 hours are laser hours in which the laser actually ran. Medium: Ytterbium Wave length: 900-1200 nm Power: 2.65 kVA Specifications: -Type: M2 Cusing -Year of manufacture: 2015 -Very few laser hours! -Machine incl. filter unit-ATEX II-Water V2, sieve length, nitrogen generator with buffer tank -Delivery: immediately Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for the safe processing of of aluminum and titanium alloys etc. Only aluminum (AISi10MG) was printed on the system. The system has also saved a backup folder for titanium parameters. These titanium parameters were originally supplied, so theoretically you can also print titanium Outer dimensions: 2542 x 1818 x1987 mm (WxD ...

Key data: 190 mm, 190 mm, 250 mm

Trotec SpeedMarker 300 – Laser Marking Machine | YOC. 2021 | Laser new 2025 For sale is a Trotec SpeedMarker 300 in very good condition. The laser source was completely renewed at the end of 2025 – the machine is technically as good as new and ready for immediate use. Technical data: - Manufacturer: Trotec Laser - Model: SpeedMarker 300 - Year of construction: 2021 - Laser source: new (renewed at the end of 2025) - Marking software: SpeedMark - Cooling: Air-cooled - Included: Extraction system Areas of application: - Marking and engraving of metals (stainless steel, aluminum, brass, etc.) - Marking of industrial parts - Serial numbers, barcodes, logos, data matrix codes

An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible.

This 3-axis SEI Laser INFINITY 5070 V300 was manufactured in 2022. It features a working area size of 500 x 700 mm and a Z-axis guide of 650 mm. The machine is designed to support materials with a maximum weight of 40 kg/m². If you are looking to get high-quality laser cutting capabilities, consider the SEI Laser INFINITY 5070 V300 CO2 laser cutting machine we have for sale. Contact us for further details.

This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details.

CO2 laser cutting machine manufactured in 2008. This SEI Laser Paper Blaster 02 features a sealed CO₂ laser with a nominal power of 115 W, designed for paper and cardboard processing. It includes an automatic sheet feeder with a maximum stack height of 350 mm and an integrated conveyor system for efficient operation. If you are looking to get high-quality cutting, marking, and engraving capabilities, consider the SEI Laser Paper Blaster 02 machine we have for sale. Contact us for further details.

A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible.

Haas Laser HL 1203D Optics Construction: 22-31-21-BX Laser class 4 1500 W 1064 nm More items - new and used - can be found in our shop! International shipping costs on request!

This 4-axis LASAG KLS 246 CL60 was manufactured in 2008, a laser welding machine with enclosed class 4 safety cabin and camera window. It features a linear-motor XY table (X 400 mm, Y 100 mm), Z travel 300 mm, and a direct-drive rotary table for precision handling. L2-CNC control with SERCOS and a 15-inch touchscreen, plus dedicated water chiller included. Consider the opportunity to buy this LASAG KLS 246 CL60 Laser Welding Machine. Contact us for more information.

Laser Center of Lasag AG TYPE: FLS 542 C Year of Make: 2006 There are 2 systems each for the laser center (2x optics, 2x laser source) There are also the fiber optic cables and the transformer blocks for the laser sources as well as a PC control system. The plant was dismantled and stored in full working order at the end of 2024.

M2 cusing multilaser, 2 lasers à 400 watts CL1 Machining area: 250 x 250 x 350 mm (x, y, z) incl. incl. extension of the dosing chamber axis CL2 machining area: 250 x 250 x 250 mm (x, y, z) CL1 Operating hours : 6.176 h CL 2 Operating hours : 4,131 h Wet Separator NA7-11 CL Screening station incl. pallet trucks Blow-out station Powder container (8 pcs) Various accessories and spare parts (installation panels, seals, filters, rubber lips,) Machines can also be sold individually.

attention: the machine can be transported on a standard truck! Additional technical specifications: • Laser source: ROFIN-SINAR, type: 2000 SM • incl. extraction system

with extraction system, Fabr. LOTUS LASER SYSTEMS, and other pre-filter extraction system, type: VACUAIR UML 350, as good as new

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 874 mm   space requirements -front/back-: 1250 mm   total height: 1570 mm   total weight approx.: 360 kg Software update 2009

LASIT T-Comfort Z G2 ist eine Laserbeschriftungsmaschine, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Es liegen keine Angaben zu Arbeitskapazitäten (Durchmesser, Module, Hübe, Werkstückmaße) vor. Es sind keine detaillierten technischen Spezifikationen (Drehzahlen, Vorschübe, Stromversorgung, Abmessungen, Gewicht) verfügbar. Sie ermöglicht das Erreichen enger Toleranzen und eignet sich für Branchen wie Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luft- und Raumfahrt sowie Medizintechnik. Technische Daten ohne Gewähr

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/500/H266 mm -Weight: 54 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/540/H178 mm -Weight: 11 kg

This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015.

Concept Laser Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminum and titanium alloys etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Shielding gas possible through 2 connections for external N2 generators (optional) Build volume 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501.973 hrs Laser 2: 503.411 hrs Other devices: Lifting device Inox 200 Weight: 102 kg Max lifting capacity 135 kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions: 800x480-570x755-850 mm Drive type: AC Power: 1.25 kw Voltage: 230 V 9.2 A IP65 pro ...

LASCO FP 222 S hydraulic press was built in Germany by Lasco Umformtechnik GmbH. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO FP 222 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex components used in the broadly defined automotive or machinery industry. Its main application is hot and cold forging. The use of a die cushio in the lower work table and the large slider stroke means that the machine can also be used as a deep drawing press. All machining processes are performed with a high press force of up to 200 tonnes, which, combined with the highly dynamic slider, guarantees the b ...

LASCO TSP 160 S forging press was built in Germany by Langenstein & Schemann A.G. (Lasco Umformtechnik GmbH). The machine has been continuously maintained and upgraded throughout its service life. In 2019, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO TSP 160 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex parts. It is ideal for forges and industrial plants that require high press forces and high repeatability of the manufactured parts. Its main purpose is die forging, metal stamping and metal forming, especially hot forming of steel or aluminium workpieces. It also enables punching, calibration of forgings, trimming and blanking of workpieces after the forgin ...

A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible.

Hey Dear Ladies and Gentlemen, Dear Sirs, Thank you for your enquiry. price 2.690.- EURO EXW Finland We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Edge sanding machine LASM Volpato LBK 160 SN 349177 year 1989 Manufacturer: LASM Volpato Italy Vertical oscillating sanding machine 3.4 kW motor Swivelling table Mechanical swivelling Additional support and "round" sanding discs Suction device Movable platform with wheels Weight 250 kg Technical specifications subject to change Edge sander LASM Volpato LBK 160 SN 349177 Year 1989 Manufacturer: LASM Volpato Italy Vertical Oscillating Grinding Machine 3.4 kW motor Swivel table Mechanical swivel Addit ...

Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: HAAS LASER -Control comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -Q-BW-Driver: 68.11.40 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 530/500/H135 mm -Weight: 14 kg

LaserTec FullSet Monolith 265 industrial energy storage system was built by LaserTec S.A. in Poland in 2023. This highly advanced machine is a key component of a company’s strategic energy management. It allows the storage and management of electricity at the most cost-effective times, bringing tangible savings to the company. The system also plays an important role in stabilising and reducing overloads on the local network, which is particularly important in industrial plants where the continuity of production processes is critical to maintaining operational fluidity. The FullSet Monolith 265.50h energy storage system accumulates electricity from both photovoltaic installations and the grid. The battery modules made of NMC lithium-ion cells are characterised by timeless durability. Off-grid operation, on the other hand, provides emergency power in the event of power cuts. This solu ...

This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details.

ALPHA LASER ALFlak300 M was manufactured in 2017. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The machine offers a movement range of 340 x 320 x 420 mm and a maximum movement speed of 25 mm/s. If you are looking to get high-quality welding capabilities, consider the ALPHA LASER ALFlak300 M machine we have for sale. Contact us for further details.

Air cooler, evaporator, cold cell, industrial cooler, cooling unit, cooler, water cooler, cooling system, cooling -Manufacturer: Gretag Cooler -Cooling system comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -for distilled water -Dimensions: 482/620/H177 mm 590/240/H705 mm -Weight: 37kg

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/400/H88 mm -Weight: 5 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems MAINS SUPPLY -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/530/H220 mm -Weight: 15 kg

Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 Screen keyboard -3x cards type: EK-1 MPS 732/015 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 530/398/H290 mm -Weight: 18 kg

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -1x card type: Gretac SPT 68.12.00 -1x card type: Gretac GPR 68.11.90 -1x card type: Gretac SIP 68.11.87 -1x card type: Gretac IOF I 68.11.96 -1x card type: II 34.74.11 -1x card type: Gretac GSP 68.12.24 -1x card type: Gretac ASP 68.12.36 -1x card type: Gretac GHD 68.12.28 -1x card type: Gretac HSP 68.12.32 -1x card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E -1x: Positive Switching Regulator PSR 510E -Dimensions: 482/400/H620 mm -Weight: 29 kg

This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details.

Travel: 0 x 0 x 0 mm [ X x Y x Z ] Metal 3D Printer Laser Type / Power: Yb Fiber Laser / 250 W Wavelength: 1070 nm Lens: F-Theta Precision Lens Volume of construction: 100 mm x 100 mm Reservoir volume: 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 - 100 microns Scan: jog 20 m/s, operation 6 m/s Spot size: min. 40 microns Chamber opening: 450 x 180 mm

General SKU347W893 LocationBarneveld CEcheck MakeAtlantic Zeiser Specified Features - Labelling Machine Motor5 KVA, 400 volt General Typeiota System Mach.No.AZ09021000-B0803 Year of construction2011 Floor space1,20x1,20 m Total height2,0 m Weight370 kg Extra SpecificationsWith Omega print head, type 36i,&:nbsp:Adventech touchscreen control, Electronic control System, cool unit, 2100 watts,&:nbsp:rubber belt conveyor, dimensions 1130x60 mm&:nbsp:Cam reader.with electrical cabinet( as is)Consumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuti ...

Laska Mixer ME 250 meat mixer, known for its exceptional durability, reliability and high efficiency in demanding production environments. This model has a 250 liter bowl and a maximum mixing capacity of up to approximately 200 kg, making it an ideal choice for professional use. It is made of heavy industrial stainless steel, which ensures a long service life and easy maintenance. With installed motor power from 5.5 kW to 8.5 kW, the Laska ME 250 guarantees homogeneous mixing of various meat mixtures while preserving the structure and integrity of the product particles. Choose a reliable partner for efficient production!

Technical specifications Category used machines Subcategory mechanical processing of meat Type Mixer Height 2200 mm Width 1500 mm Length of 2600 mm Capacity 800 l Power supply: 400V 50 Hz 3N Full power of 18 kW The main material stainless steel, acid-proof The delivery time 2-3 weeks The type of the agitator Paddle Loading Tote bin Loader, free-standing The type of mixer Mixer open The number of twin-shaft Description Mixer company BABE provide quick and intensive mixing of the product. Presented machine has many uses and is ideally suited for mixing products of different consistency. Mixer has two paddle shafts provide homogeneous and the highest quality product. Is controlled using the control panel where we can monitor and adjust the device to our requirements. Specification: Brand: LASKA Model: ME 800 Type: rotary vane Mixer Size: 2200 x 1500 x 2600 (mm) ...

Laska angle grinder WW 130, 130 mm, 1-speed grinder, frozen meat version, all stainless steel, ergonomic control, saftey cover for cutting set hinged and electrically interlocked, saftey grid for hopper. The machine is immediately available and can be tested in Koblenz, Germany.

Knife for cutter LASKA type K-200 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Laska KU 65 cutter, bowl capacity 65 liters, microprocessor control, membrane keyboard, stepless speed control, 4 freely programmable fixed speeds, mixing gear forward and backward continuously, 6 knife head, electric knife shaft brake, noise protection cover. The cutter can be tested in 56070 Koblenz.

Laska W 130-1 automatic grinder, 130 mm, hopper capacity 42 Liters, control via push buttons. You are very welcome to test the machine in our facility in Koblenz, Germany.

Stock # U2397-2 Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifti ...

Laser-Italy, complete automatic biscuit and biscuit roll line 250-300 kg/h for: Small layer cakes, capacity: 19700 pieces/h, dimensions: 32x70xh23 mm Large layer cakes, capacity: 8900 pieces/h, dimensions: 48x100xh23 mm Mini rolls, capacity: 10300 pieces/h, dimensions: ø35x80 mm Sponge rolls, capacity 1190 pieces/h, dimensions: ø60x250 mm with 1 flow-wrapping machine 250-350 ppm (Syntegon-Germany) Includes: - Pre-mixing container for dough or baking mass PML200 - Turbo mixer aeration unit TML500 - Water cooling unit complete with connecting pipes, biscuit roll extruder, EXTR1000 - Sponge cake decorating unit before baking DECO1000 - Cyclothermal tunnel kiln FCT 1.0 x 10 m - Cooling belt for sponge cake TRPS1000 - Sponge cake work bench BLPS1000 - Longitudinal cutting device for sponge cake GRTL1000 without tools - Cutting Tools for Sponge Cake Cutter GRTL1000 - Syru ...

Meat grinder Laska WW 130-1G, 130 mm angle grinder, 1-touring wolf in frozen meat version, stainless steel version, load for 200 liters standard car, ergonomic operation, enlarged funnel with 295 liters

Meat grinder Laska WW 130-2, 130 mm angle grinder, 2-touring wolf, stainless steel version, load for 200 liters standard car, ergonomic operation, enlarged funnel with 295 liters

Cutter Laska model KU 65 AC, bowl capacity 65 liters, microprocessor control, probe plate with membrane keypad and plain text display, infinitely adjustable knife shaft 35-4,900 rpm, two bowl speeds, mixing gear backwards infinitely variable, electric knife shaft brake, 6-knife head, 3-knife head optionally available for an extra charge, engine power 23 kW, operating voltage 3 x 400 VAC / 50 Hz

Laska Mixer Type ME 250 Vacuum Z Arm Mixer Kneader Filling quantity approx. 180 KG

Laska Mixer ME 250 VAC Capacity 180 Kg Mixing System Z Arm Kneader Mixer

LASKA VACUUM CUTTER KU 750 V