krupp corpoplast used for sale

CAP.: 10 000 BTLS/H OF 1.5 L,

W 82 | BLOW MOULDING KRUPP CORPOPLAST YEAR: 2000 SPEED: 24.000 BPH MODEL: BLOMAX 16 16 CAVITIES PREFORM FEEDER

Type: 6B R1, beading for bearings of 20-100 mm diameter. Workpiece height: Max. 50 mm, Sheet thickness: Max. 0.5 mm.

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg

Type: 6B R1. Beading machine for edges from 20-100 mm (diameter). Workpiece height: Max. 50 mm, plate thickness: Max. 0,5 mm.

Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...

TECHNICAL SPECIFICATIONS Manufacturer: KRUPP / KLEEMANN REINER Designation: Impact crushing plant and screening unit Design: semimobile, screw construction Year of construction: 1996 Complete treatment plant consisting of: Item 01) FEED BUNKER Bunker capacity: approx. 6 cbm Bunker insertion width (side): 4,270 mm Bunker insertion height: 6,800 mm Hopper elevation: 500 mm Item 02) BUNKER VENT Type: FUF 1200-250x3500 Usable width: 1,200 mm Length: 3,500 mm Installation inclination: horizontal Drive power: 2 x 3.5 kW Item 03) CIRCULAR VIBRATING SIEVE Type: Turbo 1.4 x 1.8 - 2D Screen version: Two-decker Screen width: 1,400 mm Screen length: 1,900 mm Total length: 2,200 mm Drive power: 11 kW Item 04) HAND-HELD STATION - Between feed hopper and impact crusher - Conveyor belt with access on both sides - Enclosed and protected from the weather Item 05) ...

a good blanking press Krupp Model PEKRD 250h, 250 tons, year 1980/2005, overhauled 2005, with infinitely variable drive system and Siemens S7 controls, feed system for material 0.5-6 mm, 500mm wide. With decoiler 6 tons. Built as a double-sided C-frame press so that in- and outfeed front-to-back is possible

PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.

Krupp Kautex Blowmoulding Machine Mono layer Double head One station Machine has been fully revised mechanically and also PLC revision in 2008 Machine is in working condition

PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.

Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure.

plate width: 1.100 mm plate depth: 2.200 mm plate height: 350 mm weight of the machine ca.: 1,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Krupp - Type: 4 - Inlet size: 630 x 355 mm - With Electrical motor

Manufacturer: Krupp - Type: 6 - Inlet size: 1.000 x 630 mm - With Electrical motor - Crusher is sandblasted and painted

OVERHAULED - Size: 1.600 x 2.000 mm - With Electrical motor and springs.

Various spare parts for Krupp impact splitter N90. Except for the roto plate, all are unused new parts

Screening machine KRUPP 16/70-2 Brand: Krupp Type: DU 14 Screen area: 7000 x 1600 mm - 2 deckers Incl.: 30 kW electric motor and springs

Water-cooled MIG-MAG welding machine Make F. KRUPP Type CW 351 / CW 354 BW / FS II Construction Masch. -No: 4745 Federal utility modelPower range: 30 - 350 AED at 295 A: 100%ED at 350 A: 70%With- sep. wire feed- hose package- Recooling devicevery little usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Screening machine KRUPP / Hazemag Brand: Krupp / Hazemag Type: CK 803 Screen area: 5600 x 1550 mm - 3 deckers Incl.: electric motor and steel construction.

Electric magnet block. Brand: Krupp. Block : L= 1650 x W=1200 x H=600 mm. Power requirement block = 7 kW, 35 Amp. Weight about 3.5 – 4 tons. Included rectifiers (new).

Krupp Electric Magnetic Belt, heavy duty Block : L= 1650 x W=1200 x H=600 mm Power requirement block = 7.7 kW Power requirement drum motor = 5.5 kW Belt width : 1400 mm - A.A. 3200 mm Speed : 2.5 Mtr./sec. Included rectifiers (new) Weight approx. 7500 kg Stock 3 pieces

one batch of clutches (unused) Brand : Krupp Diameter from 200mm to 800mm. Dead. Weight about 25-30 tons

Single stand - eccentric press KRUPP type PEKRD 125 h Masch. No. 2861 Year of construction 1977 Compressive force 125 ton. Projection 400 mm Table size 950 x 750 mm Ram surface 800 x 540 mm Table opening 100 x 250 mm Stroke adjustment 8 to 160 mm Ram adjustment 100 mm Installation height largest stroke top max. 550 mm Number of strokes 60 strokes/min. Table height above corridor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in the tappet - Compressed air Clutch-brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram position - Table top with ball rollers - Two-hand operation - Grease central lubrication HELIOS- Stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm Weight approx. 10 tons. good condition (very little used); used

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

number of controlled axis: . workpiece weight: . kg throat: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m 2 piecesThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS Manufacturer: THYSSEN KRUPP Fördertechnick Description: Chain conveyor, scraper conveyor Type: OTK 440/1200x9408 Design: stationary, heavy version Year of construction: 2001 Drive type: slip-on geared motor, planetary gear Drive power: 55 kW Length chain conveyor: 9,400 mm Chain conveyor width: 1,200 mm

: . length: 2200 mm plate width: 1500 mm plate height: 880 mm : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gebr. Mixing plant / tower plant Fabr. Krupp, control company Dorner, 1 x mixer THZ 3000 Teka, 1 x mixer THZ 1000 Teka, with 4 cement silos, hot water supply via biomass heating possible, aggregate storage in the tower, Feeding via elevator/vibrating chute and distribution belts, recycling plant with two separate agitator basins

Stationary crane with pulverizer Brand pulverizer: KRUPP Electric water propulsion

Screening machine KRUPP 21/55-2 Brand: Krupp Screen area: 5500 x 2100 mm - 2 deckers Upper deck: [] 35mm Lower deck: [] 16 x 3mm Propulsion: 22 kW Incl.: springs and spring console In stock: 2 pieces

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head -Adjustment: SK50 -min. Bore diameter: 100 mm -Max. Bore diameter: 120 mm -Suitcase -Dimensions: 350/170/H135 mm -Weight: 12 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head -Adjustment: SK50 -min. Bore diameter: 95 mm -Max. Bore diameter: 115 mm -Suitcase -Dimensions: 400/170/H140 mm -Weight: 12 kg

Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Krupp, protective gas wire electrode CrNi 19 9 -Type: NOVONIT 4316 O 0.8 mm -Dimension: O 300/100 mm -Total weight: 15.4 kg

Thread cutter, tapping machine, tapping machine -Integrated reversing gear: with fast reverse -pneumatic: driven -Max. Cutting capacity: M6 -Weight: 3.5 kg

Cone crusher Krupp Brand: Krupp Type: 91-20 Year of construction: 1999 Incl.: electric motor, hydraulic system, electric control and new wear parts. Type: 90-8 Year of construction: 2000 Incl.: electric motor, hydraulic system, electric control and new wear parts.

Description: Largest working pressure: 63 t Cutting surface, ks = 40 kg/mm²: 1600 mm² Projection: 250 mm Stroke of the ram: 20 - 120 mm Ram clearances: 55/min Motor: 3/1500 kW/N Lower tabletop dimensions: approx. 790 x 500 mm Upper tabletop dimensions: approx. 400 x 370 mm weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,200 x 2,500 mm

Description: With accessories as shown in the pictures Diameter of the rolling element at the top: approx. 100 mm Diameter of the rolling element at the bottom: approx. 50 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,200 mm, weight approx.: 700 kg

PRESS DESIGN   drive system: eccentric / crank   openings in uprights: yes   feedstock transport direction: right to left PRESS FORCES   total force (nominal): 315 to   nominal work capacity: 45 kNm PRESS TABLE   table surface (left-right): 2250 mm   table surface (front-back): 1100 mm   thickness of bolster plate: 150 mm   height above floor level: 1000 mm SLIDE   slide force: 315 to   table surface (left-right): 2250 mm   table surface (front-back): 880 mm   stroke: 210 mm   stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke rate (min.): 25 /min   stroke rate (max.): 80 /min   main drive power: 60 kW SLIDE EJECTOR / CUSHION   working principle: pneumatical  & ...

Overview The BLOMAX 16 blow molder was manufactured by the German company Krupp Corpoplast (now KHS) in 2000 and until recently was part of a PET filling line at a major Austrian beverage bottler. The blow molder is now becoming available as the owner is investing in a completely new line. Technical details Output: up to 24,000 bph 16 cavities Volume: 0.2 - 3.0 l  Peripherals  Preform feeder | Tanner AG | SBT-3012 | -  Tipper  Silo Lift  Sorting  Chute

Exciters - pathogen - vibration sensor - unbalance unit Schenk 23st Types: D1S, D02, DF2, DF200S, DF02L, D3, DF401S, DF5L, DF5S, DF5V, DH75 Siebtechnik 10pcs Types: GR20 GR30, GR31, GR40, GR41S allis chalmers 4pcs Types: 3F1, 4D1, 4E1 Jost / Joest 3pcs Types: JR200, JU600, JR406 Krupp 3pcs Types: GR1, GR3 Friedrich / PWH 3pcs Types: UE20, UE45 KWE 1st type: RF225 Honert 1st Type: H2U30 COMESSA 3pcs Types: 7 and 5 Binder 2pcs Foot dimensions 6x120mm X 280mm

Complete Soudronic line for tin cans 50,2 mm. Include line for lids KRUPP. Speed - 500 cpm.

10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system

Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...

Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures

Thyssen Krupp Gerlach Conservation Basin Thyssen Krupp Gerlach Conservation Basin Complete design of the system in stainless steel with heating Year of construction 2011 Metrics: HxLxW= 100 x 556 x 83 cm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More preservation tanks in other sizes - new and used - can be found in our shop! International shipping costs on request!

Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

MIXING PLANT -Tower system made by Krupp, built in 1969 -Control engineering, originally from Pfister Waagen Augsburg -Current control from Dorner Electronic – Dorner Control -Mixer THZ 3000 (Teka) year of manufacture 1980 MIXING PLANT -Tower complex Manufacturer Krupp, Year of production 1969 -Control construction Manufacturer originally Comp. Pfister Waagen -Control Dorner Electronic - Dorner Control -Mixer THZ 3000 (Teka) Year of production 1980

Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute