krauss maffei km used for sale

2017 Andritz KMPT GmbH DCF312 / 16 / 4 Andritz - Dynamic membrane filtration Dynamic Crossflow Filter cpl. with control unit Model: DCF312 / 16 / 4 Manufacturer: Andritz KMPT GmbH Year of manufacture: 2017 Condition: As good as new Description: Crossflow processes are used to separate substances that are difficult to filter. In this process, rotating ceramic discs (alternatively: polymer) generate a turbulent differential velocity. With dynamic crossflow filtration, a high degree of separation can be realised, especially with a concentration of the retentate of up to 700 mPas. Ceramic filter discs are available on the market in a wide range of pore sizes from 7 nm to 2 μm. Areas of application: - Colour extraction (e.g. pigments) - Separation of biomass - e.g. in the extraction of enzymes, proteins, proteins, polysaccharides, antibiotics - Recovery of valuable substances -  ...

Gear motor, electric motor -Speed: 16 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 430/180/H220 mm -Weight: 19 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 83 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -with: electrical separation coupling -Dimensions: 530/160/H230 mm -Weight: 23 kg

Socket line, plug -Type: KMF-1-24-2,5-LED -Number: 6x available -Price: per piece -Minimum purchase: complete -Weight: 0.17 kg/piece

Three-phase motor, electric motor -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 545/295/H360 mm -Weight: 86 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, gear motor type ZG2 KMR 80 K 4 -Speed: 80 rpm -Power: 1.1kW -Type: B5 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Dimension: 500/200/H260 mm -Weight: 29 kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 71 G 4-2 -Power: 0.55/0.7 kW -Speed: 1400/2840 rpm -Shaft: Ø 19 x 40 mm -Protection class: IP44 -Number: 1 piece available -Dimensions: 250/140/H180 mm -Weight: 11kg

SPECIFICATIONS: Installed power: 2.2 kW Automatic saw blade return Automatic lubrication

electric motor, three-phase motor -Manufacturer: VEM, electric motor type KMO 56 K 4 -Power: 0.12 kW -Speed: 1360 rpm -Shaft: Ø 11 x 20 mm -Design: B5 -Dimensions: 150/119/H153 mm -Weight: 4.3 kg

Gear motor, electric motor, electric gear motor -Manufacturer: ASUG VEM, geared motor -Transmission: ASUG type GWWN 1052 -Engine: VEM type KMR 56 K 4 -Power: 0.12 kW / 1360 rpm -Protection class: IP44 -Total dimensions: 290/135/H185 mm -Weight: 10 kg

Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing, filter dryer, receiver dryer -Manufacturer: KMP Kenmore, Receiver Dryer -Type: KHP 64/130/S-8X8MM-DF -Dimensions: Ø 65 x 167 mm -Weight: 0.6 kg

Bread roll line Kövy Fortuna KM6 6-row - 6-row sliced roll line with magazine and head machine - with discharge - Fortuna KM6 Head Machine - Year of construction 2004

Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing, filter drier, receiver dryer, filter drier -Manufacturer: KMP, Filter Drier -Type: MB 20 B6 5/8 FLF -Dimensions: Ø 42 x 210 mm -Weight: 0.4 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1435 rpm -Shaft: Ø 38 mm -Design: B3/B5 -Protection class: IP 44 Quantity: 1 piece available -Dimensions: 480/285/H335 mm -Weight: 69 kg

electric motor, three-phase motor -Power: 1.1 kW -Speed: 700 rpm -Shaft: Ø 28 mm -Design: B5 -Protection class: IP 44 -Dimensions: 365/213/H230 mm -Weight: 29 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering -Manufacturer: Jungheinrich, tiller head / tiller complete from pedestrian stacker type EJE-KmS -Number: 2x drawbar available -Price per piece -Dimensions: 1050/510/H220 mm -Weight: 20 kg/pc.

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 132. M4 A -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38/80 mm -Design: B5 -Protection rating: IP44 -Number: 3x motors available -Price: per piece -Dimensions: 525/285/H320 mm -Weight: 88 kg/piece

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection class: IP44 -Dimensions: 605/315/H400mm -Weight: 121 kg.

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection rating: IP44 -Design: B3 -Dimensions: 600/320/H395 mm -Weight: 123 kg

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KMR 71 G 2 Ex-protected -Power: 0.8 kW -Speed: 2850 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 44 -Dimensions: 250/140/H185 mm -Weight: 11.4 kg

Geared motor, electric motor, electric geared motor -Speed: 77 rpm -Power: 0.55 kW -Design: Angle gear -Brake -Shaft diameter: 19 mm -Protection class: IP 54 -Weight: 22 kg

electric motor, three-phase motor -Power: 0.37 kW -Speed: 2750 rpm -Shaft diameter: 14 mm -Design: B5 -Protection class: IP 54 -Weight: 9.5 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 180/140/H170 mm -Weight: 5.6 kg

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.55 kW -Design: Angle gear -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 28 kg

This shredder for plastic waste is an essential tool for efficient recycling operations. Designed to handle various types of plastic, it offers reliable performance for reducing waste volume. Perfect for recycling facilities and manufacturing plants, this machine ensures effective plastic waste management. By integrating this equipment into your operations, you can enhance your sustainability efforts and streamline your recycling processes. Ideal for businesses aiming to improve their environmental impact, this solution for plastic waste is a must-have for modern recycling needs. Power: 22 kWVoltage: 380/660 VCurrent: 43.5/25 AFrequency: 50 HzSpeed: 1465 rpmDrive: VDE 0530Efficiency: cos 0.85Protection Class: ISO B Find more here - / Contact us at -

Geared motor, electric motor, electric geared motor -Speed: 259 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 32 mm -Protection class: IP 55 -Weight: 30 kg

electric motor, three-phase motor -Power: 0.37 kW -Speed: 2750 rpm -Shaft diameter: 14 mm -Design: B5 -Protection class: IP 54 -Weight: 7 kg

Inv. Num. : 8328 Type: KMX 732 evo Producer: MANURHIN Created: 2013 Parameters: Control system: FANUC Operating hours: 20723 h Max. rod diameter: 32 mm Number of Spindles: 7 plus 2 pieces Maximum spindle speed: 10000 1/min Spindle bore: 37 mm Spindle stroke: 410 mm Weight: 4500 kg Equipment: Collets Bar Feeder Ducts (21 and 13 mm) Telescopic reduction inserts (inner diameter 21 and 13 mm)

Inv. Num. : 8329 Type: KMX 413 Producer: MANURHIN Created: 2018 Parameters: Control system: FANUC Hours: 9473 h Max. rod diameter: 16 mm Number of axles: 4 plus 2 pieces Maximum spindle speed: 12000 1/min Spindle bore: 19 mm Spindle stroke: 130 mm Equipment: Collets Bar Feeder Spindle adjustment for 16 mm rod without adjusting the rod end

saw blade diameter: 275 mm cutting diameter: bis 90 mm cutting range flat: 120 x 75 mm turning speeds: 40/80 U/min miter cut: 45°/90°/-45° ° weight of the machine ca.: ca. 150 kg Manual saw blade feed Accessories: Coolant device Underframe with 2 drawers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used KMT nuts original price 180 € Sale of the 13 pieces for 600 €

Kiefel Speedformer KMD78 BFS Thermoformer with in-mold trimming using steel rule Knives., Age 2012, Suitable for PS, OPS, EPS, PP, PE, PVC, APET or CPET., Motor Indexing of sheet, Double Heating, Auto Transport Rail spreading for PP, Auto-sheet sag control, Film width max. 810 mm, Max. Form Area 760 x 540 mm, Max. negative/ positive Forming height 150 mm above and below sheet level, Dry Cycle rate 60 strokes/ min, In Mold trimming using Steel-Rule Knives, BFS Punching force: 650 kN, Machine equipped with: film Indexing, infrared heating (top and bottom), forming and in-mold punching unit, Inline SPEED STACKER Counter/ Stacker, residual film rewind, outfeed conveyor, manual removal, Siemens SINAMICS controls and touch panel HMI.

cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 700 mm cutting width: 250 x 320 mm cutting speed: 25 - 90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm : 120 mm : 120 mm : 190 mm Impact energy: 190 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mm roll diameter: 125 mm throat: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 0,48 t dimensions of the machine ca.: 1,6 x 0,6 x 1,2 mm • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment • With 4 roller sets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sweeping width: 1250mm, Sweeping brush: Roller brush, drive: hydrostatic, oil capacity: 25l, power: 6.7kW, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1400mm, weight: approx. 1000kg, operating hours: 1063h. On-site inspection is possible.

plate thickness: 2,5 mm roll diameter: 98 mm throat: 160 mm total power requirement: 1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 550x1400x1500 m Delivered with: • hydraulic version • 4 set of wheels • Foot control • Brake motor • Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,2 mm roll diameter: 62 mm throat: 100 mm total power requirement: 0,75 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,5 mm roll diameter: 98 mm throat: 160 mm total power requirement: 1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 550x1400x1500 m Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic copying device SAUTER type KMC 8001Copier turning device, copying turning device for lathesThe copying device comes from a lathe.Connections for oil supply and oil returnCopying stroke: approx. 140 mmRadial travel at 60 Construction: 120 mmRequired operating pressure: approx. 25 barOil volume flow: max. 7 litres/min. Drive power of the lathe: max. approx. 15 kWSpan cross-section: max. 3.5 mm²Copy carriage stroke: approx. 125 mmDistance of lathe chisel to the stylus: 800 mmDead weight Copier: approx. 100 kggoods

- Double guideway two box way construction - Head changer for Multi-Face machining off larger compontents - ATC tool changer for Horizontal and vertical milling head swivabel - Distance table spindle nose    213 - 1093 mm - Distance table spindle center  130 -  ...mm - Indexing Horizontal head 5 Degrees x 72 positions - HeidenHain iTNC530 with HR410 handwheel - Spindle torq 1018 Nm ISO50  - Universal Huron type milling head

Key data: 4230 mm, 2100 mm, 850 mm

X-axis: 4,230 mm Y-axis: 2,100 mm Z-axis: 850 mm CNC control: Heidenhain TNC 530 Spindle mount: ISO 50 Spindle speed: 6,000 rpm Tool changer: 30 places Table dimensions: 4,000 x 1,650 mm Stand spacing: 2,300 mm Equipped with: - Angle milling head - Touch probe button - Inner spindle cooling - Double chip conveyors - Cooling system -Operating instructions Country of origin: Taiwan Machine LxWxH: 9,000 x 3,500 x 4,000 mm +/- Machine weight: 30,000 kg

Extrusion line for drip irrigation

Material : PP // Forming Area (Vxh): 825 x 675 mm

General SKU289P513 LocationBarneveld MakeKMA TypeSZ 112 A-ZD-50/40 Mach.No.70226/6369 Pressure Working pressure1.5 Bar Main Features MaterialStainless steel Volume5000 Ltr. Motor1.3 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity5 m3/h With motor1,3 kW 400/690 volt Ex Inletdia. 38 mm Outletdia. 38 mm Centrifugal Pumps MaterialStainless steel Information Year of construction1997 Total height0,4 M CEcheck Floorspace0,5x0,3 M Weight30 KG Extra SpecificationsCECentrifugal PumpsKMAPumps > Centrifugal PumpsBrand > KMA What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU337T903 LocationBarneveld MakeKMPT process technology TypeHZ 100/1.6 Si No.60000886 Year of construction2007 Main Features MaterialStainless steel Motor37 KW Inlet diameter65 mm Specified Features - Peeling centrifuge Peeler centrifugesyphon type Capacitynett: 157,5 Ltr. Basket sizesDia: 1250x700 mm Wall thickness20 mm Max. loading weight308 kg Motor37 kW, 400v, 1470 rpm, (ex) Max. basket speed1520 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck InletDN 65 Solids outletDN 250 Liquid outletDN 125, DN 50 MaterialStainless steel 1.4404 (316L), Stainless steel 1.4462 (Duplex2205) Information Mounted on framecheck Total height3,5 m Weight5760 CEcheck Floorspace5,35x4,5 m ATEX compatiblecheckPeeling centrifugesAndritz KMPTCentrifuges > Peeling centrifugesBrand > Andritz KMPT What you can expect from Foeth: -- Machine is in work ...

General SKU366W1603 LocationBarneveld MakeDickow Pumpen KG TypeKMBh 26/210 Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume4500 Ltr. Motor1.1 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4408, Stainless steel 1.4571 (316Ti) Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity4,5 m3/h With motor1,1 kW(400 V, 1400 rpm(Ex)) Information Mach.No.PB 98164284 Mounted on framecheck Floorspace0,4 x 0,6 m CEcheck Total height0,6 m Weight150 kgCentrifugal PumpsDickowPumps > Centrifugal PumpsBrand > Dickow What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Product Features: The KaFe manual Penal Bender(Bending center) is a next-generation, fully automatic multilateral bending center, offering high precision and efficiency. It represents a benchmark for automated production in the sheet metal manufacturing industry. It significantly reduces labor costs and boasts a bending speed three times that of CNC press brakes, reaching 0.5 seconds per turn. Full servo control ensures product accuracy within 3 seconds. Product Function: The kaFe Manual Penal Bender (Bending center) can bend sheet metal into various complex shapes without the need for molds. Equipped with a pure electric servo system, it replaces hydraulic drive and offers environmentally friendly, high-speed, high-precision, and maintenance-free features. This high-tech product was developed and manufactured to improve production efficiency, reduce labor intensity, and enhance cor ...

A case unscrewer/case uncorker Rink is available. Unscrewing heads: 4, uncorking heads: 2, container configuration: 20x0.5l NRW. Machine dimensions X/Y/Z: approx. 2900mm/1300mm/2000mm, control system: Siemens Simatic S7. Documentation available. An on-site inspection is possible.

Homag modular unit, finishing unit, buffing unit, polishing unit format processing unit, double-end profiler, edge processing machine, -Polishing finishing unit: from Homag edge banding machine -Motor: 0.25 kW -Heights adjustable and rotatable -Number: 2x aggregates available -Speed: 1x 2780 rpm, 1x rpm -Price: per piece -Dimensions: approx. H520/D300/W280mm/H520/D300/W280mm

Inv. Num. : 8819 Type: KMX SWING 1032 Producer: MANURHIN Created: 2006 Parameters: Control system: FANUC 160i TB Hours: 39563 h Max. rod diameter: 32 mm Maximum turning length: 250 mm Number of axes: 10 pieces Maximum spindle speed: 8000 1/min Spindle bore: 33 mm Length: 3370 mm Width: 1420 mm Height: 1985 mm Weight: 4250 kg Equipment: Conveyor IEMCA BOSS 332 E/32L Bar Feeder