1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 204
item-No.: 126937950
1996
5.600 €
-
Multi purpose edge grinding machine for very many grinding can be used The Kündig uniq is the ultimate of all edge grinding machines Grinding width 200mm Grinding height approx. 195 mm solid page and approximately 120 mm veneer page both sides use solid loops and veneer sanding side Electric belt oscillation, steady oscillation of the entire grinding unit, no compressed air connection required The oscillation stroke is adjustable via potentiometer drive motor pole shift bar 380V / 3kW Two tape speeds S ...
Category: 702
item-No.: 126938115
Category: 1020
item-No.: 126934765
-
4.950 €
-
DNB Rockbreaker hydraulic hammer Quick attachment Lenhoff MS 08 Grät ready 520 kg operating weight for 8-14 to excavators
Category: 702
item-No.: 126938373
max. 120 kg dough, 2 speeds, 2 timers,\r\nmoveable bowl, include 2 aluminium - bowls
Category: 601
item-No.: 126934760
N. 35 SENSOR GIUDICI N. 90 SENSOR ELECTROTEX N. 02 JOINTAIR 110M MESDAN N. 04 TANK FOR OIL N. 06 TANK INOX FOR CHOPS POLIMER N. 02 TANK VETRORESIN FOR LIQUID N. 02 TANK FOR AIR - 8000 LT - 12000 LT N. 04 THERMOSTATIC BRAND LAUDA N. 04 SILOS INOX FOR CHIPS KG 50.000 EACH N. 02 CENTRAL HEATING AIR TREATMENT AND HUMIDIFICATION BRAND CANALAIR N. 01 LITTLE PLANT FOR CHAMPION SPINNING FOR SYNTHETIC YARN
Category: 702
item-No.: 126938119
stainless steel , moveable, turning system\r\ndimension: inside 884 x 724 x 130 mm\r\n outside 1050/1930 x 890 x 1220 mm\r\ncontains approx. 50 kg fat, cap. approx. 480 - 576 donuts/h\r\naccessories: turning system for Berliner/Donuts\r\n
Category: 105
item-No.: 126926766
The dimensions of the cut section the size of the cut section under 90° (flat.) 350x320 mm the size of the cut cross-section at 90° (round) 320 mm the size of the cut cross-section at 90° (square) 320 mm stop length 500 mm cutting speed 20-100 stufenlos / infinitely variable m/min Work area length of roller table 1000 mm Power motor power main drive 1.5 kW the line voltage is 400 V engine power the hydraulics. pump 0.55 kW feed motor power 0.25 kW coolant pump motor power 0.12 kW Dimensions and ...
Category: 702
item-No.: 126938377
Category: 103
item-No.: 126926764
Machines model 6g606 are designed for processing planes of parts of ferrous and non-ferrous metals, various alloys and plastics, mainly end mills. Dimensions of table working surface, mm 630?2000 Maximum table stroke, mm 2000 The greatest distance from the working surface of the table to the axis of the horizontal spindle, mm 560 Limits of spindle rotation frequencies, rpm 20-2000 Limits of working feeds of the table, mm/min 5-4000 The speed of rapid movement of the table, mm / min. 8000 Limits of feeds of s ...
Category: 702
item-No.: 126938379
Category: 102
item-No.: 126926762
Machines model 1m63bf101 are designed to perform a variety of turning works, including turning cones and cutting threads: metric, inch, modular, pitch. High drive power and rigidity of the machine, a wide range of spindle speeds and feeds allow you to fully use the capabilities of progressive tools in the processing of various materials Accuracy class N Maximum turning diameter above the bed, mm 630 over support, mm 350 over cross slide 350 in the cartridge 400 in the lunette 350 The maximum length of th ...
Category: 702
item-No.: 126938383
max. 180 kg dough, 2 speeds, 2 timers\r\ninclude 2 moveable bowls stainless steel\r\nsafety device
Category: 102
item-No.: 126926760
The machines 1?65 designed for a variety of turning operations including turning cones and cutting threads: metric, inch, modular, Pitkevich The largest diameter of the workpiece to be installed and processed, mm: over cross slide, mm 650 above the recess in the frame, mm 1400 The maximum length of the workpiece, mm 5000 The length of the recess in the frame of the cartridge mirror, mm 390 The size of the end of the spindle headstock according to DIN 2-15M The number of steps of spindle rotation frequenc ...
Category: 101
item-No.: 126926758
Maximum drilling diameter, mm 50 Departure of the spindle from the column, mm - maximum 1600 - least 375 Distance from spindle nose to plate,mm - the largest 1600 - least 450 Number of spindle speeds 21 Spindle speed limits, mm / Rev 20...Two thousand Number of spindle feeds 12 Limits of spindle feed, mm / about 0.056...2,5 Colons - Diameter, mm 31,5 Hydraulic clamp Sleeve The greatest course of a sleeve on a column, mm 750 Speed of vertical movement, m / min 1.4 Spindle Spindle stroke,mm  ...
Category: 702
item-No.: 126938137
stainless steel, include filter\r\nwidth 1200 mm, depth 800 mm, height 600 mm\r\n
Category: 103
item-No.: 126926158
OVERVIEW: Brand: MAHO Model: MH 700 S Application type: Milling Machine type: Machining Center (Universal) Availability: 30/09/2018 Construction year: 1989 Production hours: 18042 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 3250 mm Measurements depth:3120 mm Measurements height: 2290mm Machine weight: 6600 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 20-6300 1/min CONTROL UNIT: Brand: MAHO Model: CNC 532 CNC main language: German MOVEMENT: X ...
Category: 702
item-No.: 126938403
dimension 500 x 380 x 140 mm, contains approx.18 kg fat\r\ncap. approx. 200 donuts/h\r\naccessories: 2 dropping screens, \r\n 1 lid, 1dropping plate\r\n\r\n
Category: 107
item-No.: 126926157
OVERVIEW: Brand: Trumpf Model: Trumatic L2530 Application type: Laser Cutting Machine type: Laser Cutting Machine Availability: Immediately Construction year: 1998 Production hours: 69910 Location: India Origin country: USA GENERAL DATA: Measurements width: 4800 mm Measurements depth: 6500 mm Measurements height: 2000 mm Machine weight: 7500 kg MAIN DRIVE: Laser brand: Trumpf TLF 1500 turbo Laser power: 1.5 kW Laser type: CO2 CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 840D CNC main  ...
Category: 702
item-No.: 126938149
stainless steel construction, hopper contains approx. 240 kg dough, hopper inside teflon coated, knife for cutting the dough, feeding control by fotocell \r\ndimension: h 2850 , w 1450 , l 2100 mm\r\ndistance between hopper / floor 1950 mm\r\n
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: