135,927 used machines on RESALE, but how to find them? Machine Search
Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, AC servo power supply from CNC machining center Mikron VC500D -Type: KDV1-3-100-220/300-W1 -Quantity: 1x Power Supply available -Dimensions: 485/390/H105 mm -Weight: 20.9 kg
Servo drive, servo card, output module, CPU card, input processor, power supply, control unit, converter, controller, servo line former, drive control unit, AC mainspindle drive, spindle controller -Manufacturer: Indramat. AC mainspindle drive from a Mikron VC500D CNC machining center -Type: KDA 3.2-100-3-AP0-W1 -Art.: 776781-001 112 792 -Dimensions: 485/390/H150 mm -Weight: 17.8 kg
pressure: 40 t throat: 225 mm stroke: 100 mm total power requirement: 4,7 kW weight of the machine ca.: 3,45 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Workpiece thickness: 8 - 60 mm Workpiece overhang: 38 mm Edge material of the roll: 0.4 - 3 mm Edge material in strips: 0.4 - 6 mm. Min. workpiece width: 70 mm (with thickness 8-22 mm), 120 mm (with thickness 23-40 mm), 150 mm (with thickness 41-60 mm) Feed speed: 11 m/min Machine equipment: Joint milling unit, 2 x 2.2 kW motor Gluing unit with workpiece edge preheating Pressure zone with driven main pressure roller and 2 non-driven pressure rollers Hood unit, 2 x 0.18 kW, pneumatic adjustment phase/straight Radius and fine milling unit, 2 x 0.27 kW Form milling unit 1 x 0.35 kW Profile scrapers Glue joint scrapers
Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+
Actuator module KIEBACK & PETER KDS Nominal voltage: 24 V AC Rated power: 2 VA ambient temp.: 0...50°C New ! Dimensions: 170 x 145 x 55 mm
3 pieces car radio, 1 complete in box Auction-ID: A1-49001-125
As good as new Küppersbusch design extractor hood / wall hood in black, 80 cm width. Model according to packaging: KD8950.0J-05, Ident-Nr. 705193. High-quality headroom/slanted hood with glass front. The model was originally a premium device; comparable figures mention approx. 669–700 m³/h air flow rate and an original new price/RRP in the range of € 1,899–2,100 Technical data: Brand: Küppersbusch Model No.: KD8950.0J-05 Identification number: 705193 Device type: Cooker hood Width: 80 cm Color: Black Voltage: 220–240 V Frequency: 50 Hz Power: 305 W Dimensions according to box: 957 × 957 × 543 mm Weight: 42 kg Made in EU Auction-ID: A1-49675-166
Technical details Manufacturer: Özbilim Tekstil Makinaları San. Tic. Ltd. Şti. Model: KDM-M L200 Type: Fabric relaxing machine Production date: 09/11/2018 Serial number: 8100640451800012 Product code: 8100640 Voltage: 220 V Frequency: 50 Hz Installed power: 0.37 kW Dimensions: - Width: 2570 mm - Length: 800 mm - Height: 1250 mm Weight: 157 kg Configuration: - Fabric roll unwinding system - Fabric relaxing and conditioning function - Variable speed control - Direction control system - Roller transport assembly - Operator control panel Application: - Fabric relaxation before cutting - Fabric conditioning and tension release - Garment manufacturing - Textile converting operations - Knitwear production - Cutting room preparation Function: - Reduces fabric tension - Improves dimensional stability - Prepares fabric for spreading and cutting operations Condi ...
Küppersbusch extractor hood model KD9570.2 W. Version in white glass / Cristal. Connection: 220–240 V / 50 Hz. Power according to the nameplate: 286 W. Device is in the original box. Suitable for kitchen, household or commercial use. Auction-ID: A1-49796-224
Softwood (spruce) beams with a size of 38×120×2254 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45099-2164
Softwood round post with a diameter of 80 mm and a length of 191 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45099-2144
Softwood beams with a size of 30×100×540 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45099-2173
Softwood beams with a size of 30×100×540 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45099-2172
Softwood beams with a size of 30×30×500 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45099-2160
Softwood semi-circular post with a diameter of 100 mm and a length of 200 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45099-2158
Softwood beams with a size of 30×100×600 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45099-2167
Softwood beams with a size of 37×80×2420 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45099-2165
Softwood round post with a diameter of 100 mm and a length of 300 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. In addition, the post ISPM-15 has been treated, in accordance with the international standard for wood packaging. Auction-ID: A1-45099-2149
Softwood semi-circular post with a diameter of 80 mm and a length of 250 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45099-2156
Softwood beams with a size of 30×100×540 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45099-2171
Softwood semi-circular post with a diameter of 100 mm and a length of 189 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45099-2153
Softwood round post with a diameter of 100 mm and a length of 239 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45099-2151
Softwood beams with a size of 30×100×600 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45099-2170
Softwood beams with a size of 45x95x1910 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45099-2163
Softwood round kompost with a diameter of 80 mm and a length of 149 cm. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45099-2146
Softwood semi-circular post with a diameter of 80 mm and a length of 300 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45099-2155
Softwood round post with a diameter of 100 mm and a length of 400 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45099-2148
Softwood floor planks with a working size of 28×135×2150 mm, suitable for indoor application. The boards are equipped with a GG profile (groove/groove) and are connected to a separate fish mouth, which ensures neat alignment and stable assembly. The beams are pressure impregnated (KDI) and colored brown. Auction-ID: A1-45099-2143
Softwood beams with a size of 30×100×600 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45099-2168
Softwood round post with a diameter of 100 mm and a length of 400 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45099-2147
Softwood round post with a diameter of 100 mm and a length of 300 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. In addition, the post ISPM-15 has been treated, in accordance with the international standard for wood packaging. Auction-ID: A1-45099-2150
Softwood beams with a size of 45x95x1910 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45099-2161
Softwood round kompost with a diameter of 100 mm and a length of 200 cm. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45099-2152
maximum number of results exceeded
please refine your search
50 € 
