kaeser pv used for sale

Hydraulic pump, axial piston pump DENISON PVT 38 2P1C C03 S00 ( PVT382P1CC03S00 ) 029 80097 ( 02980097 ) shaft: Ø 38 mm flange: Ø 130 mm used, tested ! Dimensions: 520 x 320 x 450 mm

Double hydraulic pump with motor and radiator HYDRAULIK RING PVS12A063A3 120 bar 20 l/min PVS40H06 3 A4 100 bar 63 l/min Engine: 4 kW 220 / 380 V IP54 Dimensions: 770 x 380 x 360 mm

Pneumatikzylinder AWE-SYSTEME GmbH PV40/100 stroke: 100 mm rod diameter: Ø 16 mm piston diameter: Ø 40 mm used, tested ! Dimensions ( without connectors ): 380 x 54 x 54 mm

Solenoid valve set TELEMECANIQUE PVA-E 201 M PVA-E 101 M 81383 200 - 220 V 50 / 60 Hz Solenoid valve set consists of 2 valves unused !; Dimensions(single solenoid valve): 90 x 65 x 32 mm Dimensions: 100 x 80 x 70 mm

Magnetic coupling pump head, pump head SONDERMANN PUMPEN + FILTER GmbH & Co. KG RM-PVDF-VKKK/40-15 PUMA.com 02.B.01-29 connection ( suction side ) : Ø 25 mm / G 1 1/4 ( inches ) Seal: O-ring connection ( pressure side ) : Ø 20 mm / G 1 1/4 ( inches ) Seal: O-ring Flange diameter: Ø 94 mm bolt circle diameter: Ø 105 mm hole diameter: Ø 6.5 mm Material: PVDF New ! Dimensions: 142 x 105 x 85 mm

Magnetic coupling pump head, pump head SONDERMANN PUMPEN + FILTER GmbH & Co. KG RM-PVDF-EGKK-30/350-60 PUMA.com 30.3506.011 Connection ( suction side ) : Ø 49 mm / G 2 3/4 ( inch ) Seal: Flat gasket Connection ( pressure side ) : Ø 30 mm / G 2 ( inch ) Seal: O-ring Flange diameter: Ø 177 / 146 mm bolt circle diameter: Ø 185 mm hole diameter: Ø 10 mm Material: PVDF New ! Dimensions: 207 x 205 x 168 mm

Flow meter, variable area flow meter GEMÜ type M23 P/PVDF 62200 1200 - 12000 l/h 20 °C 10 bar DN63 with reduction to DN40 PN10 used, tested ! Dimensions: 460 x 100 x 100 mm

Pneumatic diaphragm valve GF ( Georg Fischer ) Type: 021 PVDF/PTFE 700 250 334 pmax: 7 barb PN 8 DN 80 Flange: Ø 187 mm Dimensions: 570 x 320 x 320 mm New !

Ball valve, pneumatically actuated, double-acting GF ( Georg Fischer ) Type: 230 PVC-U/FPM 199.230.215 DN 25 d32 PN 10 Control pressure: pmax: 7 bar New ! Dimensions: 195 x 210 x 80 mm

Pneumatic control valve RTK PV6211 PN16 DN32 Flange: Ø 140 mm installation dimension: 180 mm material valve body: cast iron (GG25) Positioner: ST 6121 B6 6G Po 0,8 - 2.4 bar travel range: 30 mm Positioner: SIEMENS SIPART PS2 i/p 6DR5310-0NG00-0AA0 18 - 35 V 1,4 - 7 bar New ! Dimensions: 300 x 250 x 560 mm

Control valve, without valve actuator RTK PV6211 PN16 DN25 Flange: Ø 115 mm Installation dimensions: 160 mm Material valve body: cast iron (GG25) Travel range: 30 mm New ! Dimensions: 160 x 120 x 290 mm

PVC-U check valve, check valve, with adhesive nozzle +GF+ ( GEORG FISCHER ) Type: 303 EPDM 161303012 DN 65 PN 10 Adhesive nozzle: Ø 75 mm, length: 106 mm New, with documents ! Dimensions ( valve ): 285 x 225 x 20 mm Dimensions ( packaging ): 350 x 230 x 190 mm

- technically efficient, ready to work - after full service

Screw Diameter: 60 mm // Throughput: 250 kg/h

Vane pump with motor, hydraulic pump with motor BERARMA pump: 02-PVS2-40-F-H-R-M pressure max.: 100 bar Pressure control range: 30 - 100 bar Displacement: 40 cm3/revolution Speed: min. 1450 rpm Motor: TEE ELECTRIC MOTORS Type: OS P4 132M4B-40 H 7,7,5 kW 1450 rpm 380 - 420 / 660 - 725 V 3AC IP55 New ! Dimensions: 800 x 400 x 360 mm

Screw Diameter: 72 mm // Throughput: 180 kg/h

Profile Width (Max): 235 mm // Output Capacity: 100 kg/h

Maximum Diameter: 70 mm // Minimum Diameter: 20 mm

Maximum Diameter: 25 mm // Minimum Diameter: 12 mm

Cutting center for pvc profiles. Direction of work from left to right. The set includes a label printer, chip extractor, waste conveyor. Zuschnittzentrum für PVC-Profile Arbeitsrichtung von links nach rechts Im Set enthalten sind ein Etikettendrucker, ein Spänesauger und ein Abfalltransporter

Specifications: Saw blade 5600 mm Conveyor belt, width 1000 mm Roll diameter 600 mm Cutting height above the conveyor belt approx. 5 mm - 150 mm Drive power saw motor 1.5 kW Cutting speed approx. 350 – 1500 m/min, infinitely variable Drive power conveyor belt approx. 0.12 kW Feed speed conveyor belt infinitely variable

Mikrosan 90/23 PVC parallel extruder machine Capacity : 350 Kg / hour Machine is in good working condition. It can be seen in production. Screw and barrel has been recently replaced with new one.

PVPP filter, Fabr. Schenk, type: HK 6 STR, for 25 hl/h, with 34 horizontal screens, 340 lt. boiler capacity, 5 bar, completely in stainless steel

Description: Composed of: N°4 reels including one reel of total capacity 1025 meters, two reels of total capacity 250 meters and one reel of total capacity 1000 meters. We do not guarantee the completeness of the reels (assumed capacities) Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 600 mm, weight approx.: 50 kg

We can provide them with suitable Glass Bestcut for Busser MKH Finecut and for Stephan Micro-cut machines Supplying suitable sheath heads and cutting rings Furthermore, it is also Karl Schnell Finest Shredder Type FD 175 and FD 225 with 3 step cutting system in these the last stage as rotor / stator system is installed. Just like repair / refurbishment / and sharpening as well as regrinding of the cutting heads

PVS Micro cut model MC 12 Machine for chopping up of various products engine 9 kW of U / min. 3000 funnels state kind 45 Litre of other funnels größen on wunsch and against surcharge

PVS 125 H micro cut Inotec drive power 15 KW product performance from 300 kg to 900 kg an hour for various products pesto sauces soups Majnäse and similar

PVS 125 Hi micro-cut Feinstzerkleinerer drive 15 KW Produkleistung 300 to 2000 kg or litres an hour depending on the machine can by the fineness of the products directly at the outlet of cooking equipment or tilting boiling pans are connected

PVS 125Hui or PVS 150 Hui drive 15 or 22 KW cutting kit or emulsifying module in 125 or 150 mm size available Dre PVS Hui is 125 or 150 an Inotec with an emulsifying module to an equally moderate consistency and ensure smoothness of various products and Proruzieren such as: Paste soup ketchup Mayonnaise Pesto ointments Smoties bread on strokes nut creams and other products

Fit the PVS 125 or 150 mm Reework construction group or simply to fit in the Exchange or replacement for food TEC / Busser / Stephan / Dacia / or similar Reeworkanlagen for the bread / baking / food industry for the production of bread mash or similar products

PVS 150 V Multicut with 15 to 22 KW with combinable cutting systems Rotor/ stator non-contact Hole disc with knife head or rotor/stator with perforated disc system 2 cutting stages

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

Article: diaphragm valve pneumatic valve Manufacturer: Georg Fischer GF Type: Diastar PVC-U / EPDM Condition: used, well Model: d63 DN50, PN 6, IP 65 P Max: 6 bar Quantity: There are 10 units available.

Technical data Pressure: 32 to Stroke: (stepless) from: 80 s/min up to: 400 s/min Execution: 4 supports Table surface: Length: 420 mm Width: 380 mm Tool height: 300 mm With pressing power: upside down Slide adjustment: 50 mm Stroke adjustment: from: 6 mm up to: 50 mm slide bore diameter: 32 mm Slide clamping surface: Length: 420 mm Width: 380 mm Passage between the supports: longitudinal: 420 mm Lateral: 250 mm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3000 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 2700 mm Various accessories: Automatic feed: number: 1 Execution: collets Draw-in left Electro-pneumatic clutch Upper extractor Stock reels with electric motor

CONVEYOR BELT / CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! For many applications in industry, agriculture and for woodchips. On request we manufacture the conveyors / conveyor belts to your individual measurements. (All lengths, widths and designs possible) Available also with pimples, studs or textured surfaces. We ship worldwide we deliver worldwide, please ask for shipping costs!

POTATO BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry.

FEED BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -New, on one side coated, open, 2-ply reinforced, with mounted metal connectors to the endless connect type Aligator RS-62, -Dimensions: length 6500 mm x 400 mm width x thickness 2.4 mm, surface with tunnels and double-sided wedge bar -Tunnel 20 mm high x 330 mm long, distance approx. 500 mm, with 2 wedge bar on the top of the face, edges flush, 6 x 4 mm, green

Mozzarella packaging machine with outlet conveyor manufacturer: PFM Italia Type: PV260 1.D Year of construction 1997 Condition: used, dismantled

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -PVC coated -Length: approx. 50 m -Also other crane ropes available -Weight: 6 kg

High-frequency Fraesspindel Precise Type PKZ 50/51 with SK40 for mounting in the spindle of a milling machine and collet holder for receiving the cutter. Speed range 15,000-60,000 rpm Manufacturer Precise Control unit PVSF1 Waerme exchanger PWK17-8 Spindle PK 50/51 without automatic Tool. fully operational Special price! More information on request

PV210 SDI Medical Video Endoscope Image Processing Processor  Use This system is designed to process signals from an endoscope and into a signal that can be displayed on the monitor. Current Power requirement 100-240 V~ 50/60 Hz 1.0-0.5 A Electric shock protection Class I external power supplies Devices. Environment Temperature 10-35 °C (50-95 °F) Relative humidity 30-85 % Atmospheric pressure 800-1060 hPa Altitude ≤2000 m Storage and transport Temperature -20-70 °C (-4-158 °F) Relative humidity 10-90 % Dimensions Length 311 mm Width 188 mm Height 65 mm Weight 2.3 kg Video Output DVI 800×600, 1024x768, 1280x1024, 1920×1080, VGA 800×600, 1024x768, 1280x1024, 1920×1080 SDI 1280×720P60,1920×1080I50,1920×1080I60, 1920×1080P30,1920×1080P50,1920×1080P60VIDEO NTSC, PAL Maintenance USB Type A Year of construction: 2016 Condition: Used  ...

PV210 SDI Medical Video Endoscope Image Processing Processor  Use This system is designed to process signals from an endoscope and into a signal that can be displayed on the monitor. Current Power requirement 100-240 V~ 50/60 Hz 1.0-0.5 A Electric shock protection Class I external power supplies Devices. Environment Temperature 10-35 °C (50-95 °F) Relative humidity 30-85 % Atmospheric pressure 800-1060 hPa Altitude ≤2000 m Storage and transport Temperature -20-70 °C (-4-158 °F) Relative humidity 10-90 % Dimensions Length 311 mm Width 188 mm Height 65 mm Weight 2.3 kg Video Output DVI 800×600, 1024x768, 1280x1024, 1920×1080, VGA 800×600, 1024x768, 1280x1024, 1920×1080 SDI 1280×720P60,1920×1080I50,1920×1080I60, 1920×1080P30,1920×1080P50,1920×1080P60VIDEO NTSC, PAL Maintenance USB Type A Year of construction: 2019 Condition: Used  ...

The PV-350 LSHIX machine is a wrapper equipped with a film coil at the bottom of the machine, so it is especially recommended for wrapping irregular or difficult to drag products. This family adds to the robustness, ease of use and reliability characteristic of ULMA machines, great versatility and flexibility in format changes, as well as a wide range of versions, ensuring a perfect adaptation of the machine to the baling needs of each application. The great flexibility and proven reliability of these wrappers make them a family with a wide implementation in the food market in general, and especially valued in sectors such as agriculture, meat, dairy, etc ... Machine built in stainless steel and materials protected with anticorrosive treatment. Right-to-left work direction. Cross welding with clamp with horizontal grooves. Longitudinal welding system using 3 pairs of rollers  ...

1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).

Used Pvc curly mat machine in very decent condition. There is no problem with the whole system. Everthing works smoothly

Electronic flat knitting machine Brand Protti Model PV93SX GG 12 Year of construction 1996 Condition: Good Approximate weight: 1600 kg Serial number: 43071962 Work systems: 3 Cms fabric plate 110 cms V 380 Hz 50Kw 2.5

Automatic electronic flat knitting machine. Three work systems. Gauge 12. year 2001 cm 130 V 380 / Hz 50 kW 2.5 kg 130 Practically new with very little use.

The machine is from the year 2004, it includes the option of packaging with gas and a tread sponge to remove the air from the bag. The machine would be sold completely revised and started up, if necessary.

For sale packaging machine ULMA PV350 , the machine freshly overhauled ULMA service condition of the machine perfect very little used , packaging machine is not suitable for shrink film , which is the reason for its sale . Ideally suited for packing various types of vegetables.

This NANINNI RENATO PV- EXTRUDER MOD.PV800M-AT was manufactured in the year 2021. The machine has a Pneumatic working pressure of 6 bar and a Hydraulic working pressure of 200 bar.