kaeser pv used for sale

Description: max. working pressure: 8 ,bars rated power: ,5,5 kW working hours total: approx. 40268 hrs working hours under load: approx. 10902 hrs. time left to maintenance: approx. 653 hrs.  , please also have a look at the video of this machine Please note: compressors are delivered free of liquids, media, oils and fluids inside! suction capacity: 5,5 kW, operating pressure: 8 bar, modelname / number: SM 10, year of manufacture: 2,018, Approx. Onsite Dimension. (l x w x h): 630 x 762 x 1,100 mm, weight approx.: 275 kg

Description: Refrigeration system: Refrigerant R404/A Capacity 15.8 kg Ts= -10 to + 125 °C Ps= 35 bar HP Ps= 20 bar LP Air system: Ts= -10 to + 60 °C Ps= 16 bar Approx. Onsite Dimension. (l x w x h): 1,400 x 1,350 x 2,250 mm, weight approx.: 610 kg

Description: serial number: TH371CES4000607026 refrigerant: R404 a / 12 kg Approx. Onsite Dimension. (l x w x h): 1,287 x 1,270 x 2,162 mm, weight approx.: 600 kg

Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 20 kg

Filter chamber, filter housing SONDERMANN PUMPEN + FILTER GmbH & Co. KG SF2(2)-EU-ge/PVDF/PVDF/PP/TI/EPDM/107/129 FISF.00.B.01 0092 Capacity: approx. 4.0 l Number of filters: 1 diameter ( carrier tube for filter ): Ø 60 / 75 mm ( inside / outside ) length ( carrier tube ): approx. 500 mm connections: 3x DN40 foot flange: 135 x 135 mm / Ø 120 mm Material: PVDF, PP, TI, EPDM used, tested ! Dimensions: 700 x 210 x 220 mm

PVC working gloves yellow with fabric waistband 1 box = 120 pairs = 14,-€ We still have 6 carton in stock = 84,-€

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.

MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with single-lines. Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. Drain slot routing, drilling and routing at variable angles. Automatic scr ...

ES4019, M75, 1999, 20 - 80 kg/h,

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

1 x Rodolfo Comerio 2200mm wide x 700mm dia two roll mill, Year of manufacture: 1981, motorised nip adjustment, Rollers bearings, Direct drive gearbox (no bullgear) With 138Kw DC variable speed motor and controls Stip knives to back roll?. In very good condition.

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - various plastics such as PVC and polyamide - GRP (glass fibre reinforced plastics) - aluminium - bronze - wood - copper - brass and . Drilling (through holes and blin ...

GP113 - used approx. 15.8 m³ / 15,800 litres PVC-GF tank, aboveground, vertical, flat bottom, in good condition. volume: approx. 15.8 m³ / 15,800 litres material: PVC-GF tank diameter: Ø approx. 2.30 m height: 4.30 m Vertically standing PVC-GF-tank, aboveground storage tank, round shape, flat bottom, access on the tank body, multiple in- and outlets on the rooftop. Tank as shown on the pictures. For media with a specific weight of up to 1.42 kg / L. The container can be used as a storage tank for water, feed, liquid feed, manure, seeping juice, rapeseed oil, or as a rain collection tank, water tank and more. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank  ...

The line in good condition. The dowstream equipment made by company UNIPLAST. The line was produced PVC profiles for roller-shutter system.

Mikrosan 90/23 PVC parallel extruder machine Capacity : 300 Kg / hour Machine is in good working condition. It can be seen in production. Screw and barrel has been recently replaced with new one.

Krauss Maffei KMD 2-110 PVC Extruder Machine Hourly capacity : 450-600 KG PLC Control

infrared heater for PVC profile bending and all eqipment for bending. 220w and 3kw with this equipment you are able to bend PVC profiles, glaslists, mullions etc. set includes: Infrared heater, working table, 20 conductors for different pvc profiles.

Mikrosan 67 mm PVC Extruder It was used for production of PVC pipe Machine is in working condition

Mikrosan 90 mm PVC Extruder It was used for production of PVC pipe Machine is in working condition

Mikrosan PVC Extruder Twin screw extruder 90 x 26 Machine is in good condition

Planetary tube saw: Ø110.

Elumatec cutting and machining center model SZB 620 Capacity: 120 units/change SBZ 610 (cutting + machining module for machining in pvc profials) SBZ 610 to SBZ 609 (manual steel insertion) with label printer SBZ 609 (reinforcement screwing, pvc + steel machining) Receiving table. The scope of processing in pvc: holes for drainage, venting, the importance of places for the installation of perimeter catches, milling holes for the installation of ventilators. Screwing steel reinforcements. The scope of processing in pvc + steel: holes for mounting the handle in the window, for mounting the post, holes for dowels. Very good technical condition, the machine has been working since 2017.

Complete laundry for PET, PVC or PS in stainless for some: 500 Kg / hour. Composed of: -Reception and densing raft: 1,500 mm x 500 mm, with two blades. -Collection and stirring pond: 1,500 mm x 1,500 mm. With emptying valve and outlet belt to centrifuge of canjillions. -Centrifuge: 3,000 r.p.m., 12.5 c.v. -Collection and shipment of centrifuge to chamber separation of paper and thin. -System by air extraction separation of papers. -Collection and shipment to cyclone for Big-Bag filling.

Hydraulic pump VICKERS PVQ25 AR01AUB 0A21 ( PVQ25AR01AUB0A21 )

Hydraulic pump with motor VOGEL PVST1170-6/A1 Q = 31 l/min p = 70 bar Motor: 7.5 KW 2910 rpm 400 V Dimensions 900 x 350 x 330 mm

Vane pump with motor, hydraulic pump with motor HYDRAUILIK RING pump: PVS16E pressure max.: 120 bar flow rate: 25 l/min speed: min. 1500 rpm engine: ELEKTRA type: 1AP100L-4A 3,3,0 kW 1430 rpm 220 / 380 V 3AC IP54 pump input: 1 ( inches ), pump outlet: 3/4 ( inches ) with suction pipe: nominal diameter: 1 ( inches ) Immersion depth: 270 mm Pump base: 220 x 323 mm hole spacing (parallel to shaft): 185 mm hole spacing ( transverse to shaft ): 285 mm hole diameter: Ø 13.5 x 18 mm, slotted hole parallel to the shaft used, tested ! Dimensions: 590 x 323 x 290 mm

Hydraulic pump unit REXROTH PV7-17/16-20 RE 01MC0-16 ( PV7-17/16-20RE01MC0-16 ) P2V7/16-20C04GF1/1,7RE01+01E4 PGF1-21/1,7 RH01VUZ ( PGF1-21/1,7RH01VUZ ) Dimensions: 350 x 210 x 270 mm

Vane pump with motor, hydraulic motor REXROTH ABUG-PVV1-46U1 /100L-4-AOK/S R901040430 motor: 2.2 kW 1430 rpm 220 / 380 V New ! Dimensions: 570 x 270 x 250 mm

Hydraulic power pack with tank, universal power pack HYDRAULIK-RING PVS12EH140C1 pd: max. 140 bar Vg: 12 dm3/min ( 12 l/min ) n: max. 1800 rpm Engine: SIEMENS ( without nameplate ) Tank: approx. 100 l spare part and a. for machining center HELLER BEA 05 DC used, tested ! Dimensions: 800 x 380 x 800 mm

Hydraulic power pack with tank REXROTH pump: PV7-17/25-45RE01MC3-08 p max: 80 bar (pump) pump: PV7-16/10-14RE01MC3-16 < br /> system pressure max: 70 bar tank 250 L engine: 11 kW 1460 rpm 380 / 690 V used, tested ! Dimensions: 1500 x 900 x 1900 mm

Hydraulic pump VICKERS PVQ45AR01AB10H181100A100100CD0A 02-341905 186 bar shaft: Ø 22 mm New Dimensions: 300 x 190 x 190 mm

PVC control cable, oil-resistant LAPP KABEL STUTTGART ÖLFLEX® CLASSIC 110 5G4,0 1119505 Core count: 5 cross-section: 4.0 mm² outer diameter: 12.1 mm length: approx. 170 m New ! dimensions ( cable drum ): Ø 600 x 420 mm

Pneumatic valve TELEMECANIQUE PVUC3429 081984 G 1/4 unused ! Dimensions: 95 x 95 x 50 mm

PVC control cable, oil-resistant LAPP KABEL STUTTGART ÖLFLEX® SMART 108 5G2,5 14050099 Core count: 5 cross-section: 2.5 mm² outer diameter: 10 mm length: approx. 440 m New dimensions ( cable drum ): Ø 600 x 420 mm

Lubrication pump VOGEL PVS 1130/A1 Q: 25 l/min Pmax: 30 bar Motor: 2.2 kW 230 / 400 V New ! Dimensions: 730 x 280 x 200 mm

PVC control cable, oil-resistant LAPP KABEL STUTTGART ÖLFLEX® CLASSIC 110 18G2,5 1119418 Core count: 18 cross-section: 2.5 mm² Outer diameter: 17.8 mm Length: 100 m New ! Dimensions ( cable drum ): Ø 500 x 420 mm

lubrication pump without motor VOGEL PVS 1170-6 Q: 31 l/min (3490 rpm) Pmax: 70 bar for engine: 7.5 kW New ! Dimensions: 460 x 220 x 200 mm

PVC control cable, oil-resistant LAPP KABEL STUTTGART ÖLFLEX® CLASSIC 110 3G0,75 1119103 Core ratio: 3 cross-section: 0.75 mm² Outer diameter: 5.5 mm Length: 500 m New Dimensions ( cable drum ): Ø 400 x 460 mm

PVC control cable, oil-resistant LAPP KABEL STUTTGART ÖLFLEX® CLASSIC 110 3G2,5 1119403 core ratio: 3 cross-section: 2.5 mm² outer diameter: 8.1 mm length: approx. 59 m new ! dimensions ( cable drum ): Ø 350 x 170 mm

Hydraulic pump, vane pump REXROTH, HYDRONORMA PV6V3-42/25RA08MC 63A1 ( PV6V3-42/25RA08MC63A1 ) Shaft: Ø 19 mm Connection flange: 140 x 45 mm used, tested ! Dimensions: 230 x 160 x 130 mm

Proportional Pressure Reducing Valve ,Globe Valve Cartridge, Hydraulic Valve ARGO HYTOS PVRM1-063/S Thread: M20 x 1.5 Solenoid: 836-0671 12 V DC 1.0 A New ! Dimensions ( valve ): 115 x 59 x 39 mm

Diaphragm valve, manually operated +GF+ Type: 314 PVC-U DN 20 d25 PN 10 3/4 New ! Dimensions: 155 x 120 x 90 mm

Hydraulic pump with motor, axial piston pump PARKER pump: PV080R1K1T1NFWS Pressure ( P max ): 420 bar Continuous pressure ( pd max ): 350 bar Flow rate ( Vg max ): 80 cm3 / U Speed ( n max. ): 2500 rpm Motor: ADDA Antriebstechnik Type: FCP225MT-4 45 kW 1475 rpm 380 / 660 V 3AC, 50 / 60 Hz IP55 used, tested ! Dimensions: 1300 x 800 x 800 mm

Hydraulic pump with motor, axial piston pump PARKER pump: PV080R1K1S1NPWS Pressure ( P max ): 420 bar Continuous pressure ( pd max ): 350 bar Flow rate ( Vg max ): 80 cm3 / U Speed ( n max. ): 2000 rpm Motor: ADDA Antriebstechnik Type: FCP225MT-4 45 kW 1475 rpm 380 / 660 V 3AC, 50 / 60 Hz IP55 used, tested ! Dimensions: 1300 x 800 x 800 mm

hydraulic pump, axial piston pump PARKER PV046R9K1T1NMR1 Vg: 37,8 ccm/rev Vg max: 46 ccm/rev pd: 350 bar p max: 420 bar shaft: Ø 32 mm flange: Ø 125 mm used, tested ! Dimension: 310 x 230 x 160 mm

Hydraulic pump, axial piston pump PARKER PV046RIKITINFPG Vg: 46 cm3/U 8pd: 350 bar p max: 420 bar shaft: Ø 32 mm Flange: Ø 125 mm Dimensions: 310 x 230 x 180 mm

Hydraulic pump, axial piston pump PARKER PV080R1K0S1N-PRZ Vg max: 80 cm3/U < br />pd max.: 350 bar p max: 420 bar shaft: Ø 40 mm Flange: Ø 160 mm Dimensions: 460 x 220 x 400 mm