We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,374 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Hard PVC pipe extrusion plant for tubes D28/D30/D33, consisting of: Battenfeldextruder B45-24 d, ESDE tube crosshead K 010, vacuum calibration with water bath, Graewe-band trigger BA63, Graewe Abstech-and at chamfer machine STS50, various sleeves, cores, calibrations and jaws, as well as additional tube crosshead Battenfeld RS 8-40
new
120kW Sputtering power supply Power supply for PVD coating DESCRIPTION: Pwr. 120 kW input 400V output: 825V DC 250A 195A Dimensions: 220 cm x 80 cm x 120 cm; ready for operation
used
LIQUIDATION of washing machine of boxes and trays. Its condition is completely renovated, revised and guaranteed. Tunnel for washing trays or boxes, production 400/600 units / h. Manufacturer by INDUSTRIAL WASHING MACHINES LTD model CRUSADER 600. The tunnel is calculated and designed for a production of 400/600 ud / h, the water is heated by oil heating system, its washing phase with hot and soapy water, and its rinsing with mains water make its finish optimal. PROCESS Washing in closed circuit with hot soapy water. Rinsing with mains water. GENERAL CHARACTERISTICS Construction in stainless steel AISI 304. Tunnel dimensions: Length: 3,500 mm Width: 1,400 mm Height: 2030 mm Loading mouth 570 x 280 mm high (max. trays 600 x 400 x 280 mm). Loading height of 1,000 mm. Upper body with side hinges for registration and rounded shapes to facilitate sanitation and avoid water cross ...
used
WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...
used
This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. The processing of the cable is carried out in the two-blade system both knives from both sides at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are independently adjustable continuous operation or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical
used
IMA-PG TR100 blister machine for tablets and capsules in PVC/Alu blisters, output up to 140 blisters per minute. Blister size range from 30 x 60mm up to 128 x 150mm, and up to 12mm deep, currently fitted with tooling for blisters 60 x 140mm. With Laetus checking system. With Multipack F42 blister stacker & stretch bander, up to 40 stacks per minute.
used
BLISTER MACHINE FOR AMPOULES FARCON FC320 WITH VISION SYSTEM SEA VISION For thermoforming trays for ampoules, vials. Manufacturer: Farcon (MARCHESINI GROUP) Model: FC320 Year: 2002 Automomatic ampoules feeder on trays Pick and place system to pick up trays and place them on a conveyor Two-way conveyor Maximum forming depth: 42 mm Speed: 45 cycles/min Maximum forming area: Film width 254 mm; Film pitch 220 mm Maximum cutting area: Film width 248 mm; Film pitch 210 mm Maximum production: 63000 ampoules (1 ml)/h Hydraulic network: - Pressure : 1.5 to 2 bars - Connection : Ø 1/2" Gas - Temperature : 11°C to 15°C - Average consumption : 200 l/h Pneumatic network: - Pressure: 6 to 8 bar - Connection: Ø 3/4" - Consumption: 500 Nl/min Power supply: 400V 3-phase, 50Hz, 3A Power: 6kVA CARTONER CAM MODEL HV2 FOR AMPOULES Model: HV2 ...
used
The automatic Blistering machine Partena CAM mod. M90 is a machine specially designed to face the problems of packaging of pharmaceutical products such as: vials, bottles, phialoids, capsules and tablets. The machine is pneumatically operated, the working cycle is obtained by the following workstations: preheating station, forming station, product loading plan, cutting station, covering station. All the stations are remarkably easy to access and all the movements are fully visible, so that the line is very straightforward to clean. This machine is equipped with various safety devices to protect the operator. The Blistering machine is equipped with a stainless steel elevator mainly used for elevating and loading products onto the receiving tray. The products are collected from the tray elevated, pre-sorted and fed to the top towards further feeding unit until they reach their des ...
used
Gluing machine for paper Tränklein Model ZW 300 Year 1995 Width 300 mm Options for PVA glue Available Direct
used
The unit is suitable to pack blisters in PVC + Aluminum, Aluminum + Aluminum, Polypropylene, PET and PVC, Aclar, COC. All the stations are remarkably easy to access and all the movements are fully visible, so that the line is very easy to clean. This machine is equipped with various safety devices to protect the operator. Product parameters can be recalled from a PC, for a quick and easy format change. Reel unwinder driven by a Brushless motor, with automatic machine stop at reel end. Film splicing table equipped with integrated cutter, and automatic vacuum. Forming station entirely managed by Brushless motors. Self-aligning pre-heating plates, independently motorized. Film positioning driven by Brushless motor. Automatic Pitch adjustment directly from the display. Loader trolley MS170 with a maximum load of 300 kg. Dedicated product feeder and relevant enclosure easily remov ...
used
Blister machine for the blister pack in PVC / ALU and PVDC / ALU with mechanical transfer of the forming material by means of clips of intermittent complete movement of: Support for the foil of the forming material. Digital thermoregulators at controlled limits. Preheating station with easily replaceable plates treated non-stick. Formation station with "rotary" movement Welding station with "rotary" movement Limiter of the cooling water circuit when the machine is stopped. Sealing material foil holder Internal diameter 70-76 mm External diameter maximum 300 mm. Transfer system from the blister of the cutting die to the blister magazine. Motorization with self-locking three-phase motor with variable speed through inverter. Vacuum pump dry air pressure and air control Protection in plexiglas with safety microswitches. Controls of minimum level foils sealing and formation materials, with a ...
used
FILLING MACHINE FOR SUPPOSITORIES FARMO RES, MODEL FARMODUE FD 22/U Year of construction: 1996 Automatic machine for the production of suppositories and ovules in strips of aluminum and thermoformable plastic. The product is dosed in precise volumes in the dosing station and these volumes can be changed automatically. TECHNICAL DATA Weight: kg 1930 Dimensions: mm 4650 x 3300 x 2260 Frequency: 50 Hz Voltage: 380 volts Volume of suppositories ml 0,2 – 50 Max. film height: mm 73 Production max monodoses/h: 22000 Capacity of product tank: L 55 Packing materials used: PVC, PVC+PE, PVDC, ALU+PE, PP+ALU+PE. Easy access for machine registration, cleaning, and maintenance. Format change is quick and easy, memorization of the dimensions of the parts is done from the display panel.
new
Cutting sets and moving in snails Suitable for Stephan Machines
used
M. No.: 12091 Equipment / Additional information: DESCRIPTION: The sealers Pactur thanks to their production concepts, can be easily transported. The electronical control grants good performances and user friendly functioning. Although they have a limited foot print, are equipped with a real shrink tunnel, which grants high packaging perfomances and excellent results. The machine has two conveyor belt movement cycles, choiceable from the control panel: forward-forward and forward-reverse. Forward-Forward, with product outflow from the side opposite the load, for greater productivity. Forward-Backward, with product return to the operator, for fragile products or logistical needs. SECTORS OF USE: Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing. MAIN FEATURES: Semi-automatic sealer with shrinking tunnel Pactur type Lady Pack 45/SL 2 includ ...
used
Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.
used
Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm
used
✓ Year of manufacture December 2015 ✓ First installation June 2016 ✓ Impression Counter: 44.7 million impressions (status from yesterday) ✓ 7 colours authorized and installed ✓ Unwinder with max. roll diameter of 800 mm ✓ Priming Unit and Corona Treatment Unit ✓ Rewinder with max. roll diameter of 800 mm ✓ Blanket Automated Replacement System (BARS) ✓ OFIR Kit ✓ PUW Anilox Sleeve High Laydown 3.36 BCM ✓ PUW Anilox Sleeve Low Laydown 2.5 BCM ✓ PUW Rubber Sleeve ✓ Reverse Inspection Bridge (RIB) ✓ Slitting option ✓ HP SmartStream Labels & Packaging Print Server GEN9 ✓ ESKO Version 5.2.3 ✓ HP Authorized Software Version 1.0081.0.0.135 ✓ Machine comes without Chiller Unit ✓ Machine is technically in good condition ✓ Machine is still in HP Service Contract Technical Specifiations: Printing speed: Up to 34 m/min CMYK | Up to 26 m/mi ...
used
- Year of manufacture April 2015 - First installation January 2016 - Impression Counter: 38.7 million B2 impressions (status from November 2023) - 7 colours authorized and installed - Pallet Feeder - Drawer feeder - Inline Priming Unit with Anilox Drum and Applicator Drum - Conductivity and Density Meter - Proof Tray / Line coater bridge - Stacker - Tresu iCoat 30000 Coating Unit for water-based and UV-varnish Flood / Spot - HP SmartStream L&P Server GEN8 v5 for 30000 by ESKO - Software Options: Dynamic Barcode, Power Layout and Dynamic Marks, VDP Tools and HP Mosaic Software - ESKO Software Version 5.2.3.0 - Press Software Version 10062.0.0.34 - Customer Uptime Kit 30000 - Light Table - Chiller Unit Model EVO45 - Machine is technically in good condition - Machine is still in HP Service Contract until January 2024 Technical Specifiations: Printing speed: Up t ...
used
Edge bander type STEFANI BRT UNIVER with trimming unit and automatic feeder for straight, curved and shaped panels . application of melaminic, Pvc, veneer edges, in rolls and strips Technical details: Max panel height mm 60 Edge thickness mm 0,4 - 1,5 Trimming unit 12000 rpm Automatic feeder Overall dimensions: mm 1350 x 1000 x 1150 h Weight kg 480
used
- Compressed air: 6 bar - Transport speed: 3 - 30 m/min - Welded frame dimensions (LxW): 580 x 440 mm - Film core diameter: 76 mm - Max. film roll diameter: 300 mm - Max. product height: 180 mm - Film thickness: 7 to 60 mμ - Max. foil width: 550 mm - Cycle rate: 40 cycles/min - Total power: 3.7 kW - Machine weight: 560 kg - Space requirements (W x D x H): 2.05 x 1.72 x 1.48 m - Condition: good Details Angle welding machine fully automatic, permanently heated welding knife, DELTA color touch screen, horizontal and vertical photocells, film material polyolefin fine shrink films, PVC, PLA and other bio-films, with labeler / barcode printer SATO M8485Se Accessories no other accessories, documentation
used
Stock - No. 1919 1 complete set of extrusion tools/dies for the production of electric cable protection ducts/channels condition as new incl. punching unit used material: rigid-PVC blend
used
Used twin-screw, parallel, counter-rotating extruder by Amut model BA92 NOMAX. New 2011. Output: 270 - 370 kg/h Hours of operation: 53638 h Other details: - Diameter of augers 92 mm - L/D ratio 28:1 - Drive power 60 kW (400V, 50 Hz, 3 ph) AC - Two sets of screws -for ABS processing -for PVC processing - Number of cylinder heating zones 7 - Number of cylinder cooling zones (air) 4 - Number of heating zones for head and adaptor 5 + 1 - Built-in pressure and temperature measurement system for plastic mass - Thermal oil unit for thermostating the worms for PVC - Drive power of vacuum degassing pump 11 kW - Drive power of screw feeder 1.5 kW - Without control (subassemblies available according to the list)
used
Manufacturer: various YOM: 1986, overhauled in 2018 Capacity: 500 kg / h The system consisting of: cutter by ZIMMER. Stretcher by Muzzarelli MC Dena Srl. Sausage forming machine Muzzarelli MC Dena Srl., ES3000 mozzarella forming machine for balls by Milky lab 4 x form rollers for mozzarella balls Packaging machine for mozzarella balls PFM., PV260 Condition: used, excellent operating condition
used
Elumatec DG79 Wood saw Double mitre saw for PVC, aluminium and wood
used
URGENT, Machine on pallet ready to be loaded, in production from 2008 to 2018 for plasticized PVC formulations
used
2002 Blister machine Marchesini MB 440 for PVC - ALU. from 1992 Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 305 from 2002 • Continuous movement machine • Automatic blister feeding GUK leaflet folder Bar code reader Booklet feeder System coding for the cartons Range of work min. 25 x 15 x 65 mm Max. 100 x 85 x 150 mm • Speed up to 240 cartons per minute Check weigher Garvens S2 from 2000
used
Conic 60/126 extruder Machine can be seen in working condition Machine has been worked on PVC material
used
Mikrosan MCV 68/25D Extruder like new condition Working hours : 1100 LD rate : 25 Maximum PVC-U capacity : 200 KG/hour Calibration Table Pulling device Tilting Table
used
Thermoformer - UPS4 Year - 1993 Min. - Max. Forming width - 62 - 226mm Cycles - 15 - 50 cycles/minute Forming depth - PVC - 12mm ALU - 10mm Blister Format - Min. - 60mm Max. - 140x39mm Punching Area - Length - 226mm Width - 284mm Forming Film width - Min. - 100mm Max. - 298mm Lidfoil Width - Min. - 100 Max. - 298 Tooling - PVC/Alu - 6 Blister line size 39x94mm Alu/Alu - 7 Blister line size 38x86mm Machine Control- PacControl version 2.17 Camera – not included Hapa Printer - H-231-1
used
PVC production line Screw diameter 55 mm. Main motor power 37 Capacity(kg/h) 100-150 Kg/h Effective length of screw(mm) 1050 Equipment Content : No. Description Quantity 1 twin-screw extruder 1set 2 vacuum calibration tank 1set 3 haul-off&cutter 1set 4 stacker 1set
used
lister machine Marchesini MB 440 for PVC - ALU from 1994. Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 355 from 1994 Continuous movement machine Automatic blister feeding Check weigher Garvens S2
new
Heavy peeling machine from also for thick cables up to approx. 110 mm diameter. Cable stripping machine for PVC and lightly reinforced cables. Easy adjustment of the knives by handwheel. Cables are cut from both sides at the same time, so that the remittation drops slightly. Knife individually adjustable by spindle for different strength swelling. Double spindle for precise adjustment of the cable thickness. Two separate 1.5 kW motors for a lot of power when pulling through the cables
used
Roller conveyor with WDX drive Roll width: 500 mm Conveyor length: 2200 mm Power supply: 2 energy-saving 24V DC motors - ITOH DENKI Motor speed: 55 m/min Available approx. 250 m . Also on sale: - gravity transporters - approx. 260 m - motorized roller arches - approx. 24 m - roller and belt module for directional transmission by 90 degrees - 15 pcs (including approx. 30 linear meters of conveyors with a drive) - roller conveyors with a roll width of 80 cm - approx. 15 m - PVC conveyor belts with a belt width of 80 cm - approx. 30 m - control boxes for transporters - dynamic scale DWT/HC 30S - 2 pcs - Cardboard Flow racks with different sizes . Technical condition: used devices, condition as in the photos . Do you have any questions? Write via WhatsApp: +48 502700330
used
KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.
used
Sheet filter, Plate Filter Seitz Orion 60 x 60 for Beer, Wine, Juice With 23 stainless steel plates 60 x 60 cm With 56 x PVC filter plates 60 x 60 cm With 4 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1680 mm Width: 3500 mm Length: 820 mm Weight: 1350 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²
PVV4-1x/082RA15UMC R9000053997
new
Key data: 2100 , 9
CNC milling machine 2132 OPTIMAT 2100x3200 ATC 100% European product New for 2022! CNC milling machine 2132 with a weight of approx. 4100 KG and a working table area of 2100x3200mm, equipped with an automatic 12th tool linear magazine cooperating with the HSD / HITECO 9kW 24000rpm electrospindle (ceramic bearing, HSK F63 interface) enabling the use of tools with a diameter up to 26mm inclusive! Technical parameters: Effective working size: 2100x3200mm - Trouble-free processing of the entire size of the furniture board - Vacuum workbench made of HPL Machine weight: approx. 4100KG - The frame of the machine made of the highest quality alloy is welded in its entirety, then subjected to the stress relieving process in a special chamber with special conditions, and then milled. This process ensures that excellent results of structural rigidity and stability are achieved Z-axis stro ...
used
Sheet filter, Plate Filter Seitz Orion Type 60A100 for Beer, Wine, Juice Manufacturer: SEITZ Orion Type: 60A100 No.72044 Year of production: 1975 With 98 x PVC filter plates 60 x 60 cm With 4 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1690 mm Length: 4200 mm Width: 1300 mm Weight: 1650 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²
used
Brewery Ziemann 400 HL / brew – max. 12 brews/day Brewhouse made by Ziemann in year 2000, 400 hl/brew, with a mash filter, made by Meura in year 2000. It is almost complete brewery, which can produce various type of beers at 700’000 hl / annum. Brewery has also one returnable glass bottle (24’000 bph) and one can filling line (30’000 cph) which will be sold separately. Brewery equipment is in good condition, not dismantled, still on power. The brewhouse is controlled by Braumat control system. Most of the PLC controls is made with Siemens Simatic S7 series with central control via Ethernet. Installed mash filter Meura improves the performance of brewing process (compare to filter tank) and allows the use in the production low quality (dusty) malt and the filtration speed and quality do not change. The main technical characteristics of this brewery: Year of manufacturi ...
used
ID2752 PVE 5021S with 5t Pilemer hammer year/Year of construction 2002 approx. 7500 hours/hours Pile driver with 5 t Pilemer hammer – type DKH5L, good condition, max. vertical pile length 21m (24m with extension), max. pile weight 8,9 t, stroke of sliding brace 1500mm, max. hoisting capacity: 6,9 t at 4,6 m – 1,0 t at 11,7 m, Pile winch capacity 6,5 t (adjusted to 9 tons in 2 parts), hammer winch capacity 12,5 t (adjusted to 25 tons in 2 parts), auxiliary winch capacity 4 tons, 6-cylinder Cummins Diesel engine 6CTA8.3C (194 KW) Pile driver with 5 t Pilemer hammer – type DKH5L, good condition, max. vertical pile length 21m (24m with extension), max. pile weight 8.9 t, stroke of the push strut 1500mm, max. lifting capacity: 6.9 t at 4.6 m – 1.0 t at 11.7 m, capacity of the pile winch 6.5 t (adapted to 9 tons in 2 parts), capacity of the hammer winch 12.5 t (adapted to 25 tons ...
used
Sheet filter, Plate Filter Seitz Orion Type 60A150 for Beer, Wine, Juice Manufacturer: SEITZ Orion Type: 60A150 No.72466 Year of production: 1979 With 85 x PVC filter plates 60 x 60 cm With 2 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1180 mm Length: 4100 mm Width: 950 mm Weight: 1650 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²
used
Bottling Line for OIL • Speed: 1.000 Bph • Direction: Clockwise • Filling Monoblock COSTEC • Model: SRV 9.8.1 • Year: 1999 • Rinser 9 clamps • Fixed nozzle • Type treatment: Single, With Air • Filler 8 Valves • Type of filling: Volumetric • Capper Single head • Type of cap: Screw cap 31.3x24 • Capsuler ENOS • Year: 2004 • Pvc capsules • Plateau capsule distribution • Labeller OXE • Year: 1999 • Model: QUASAR • Number of heads: 4 • Number of stations: 2 • Type of label: Adhesive • Application: • Front label • Back label • Accumulation table • Safety protections
used
I-Max 3D UV Printer, 60x90cm Printable Area, Printable On All Surfaces Flat Or Round On Any Materials: Paper, Wood, Glas, Metal, Tiles, Stone, Rigid PVC Board, Organic Board, Plastic, Leather, Rubber, Special Paper, Porcela, Cancas etc., Print On Object Thickness Upto 15cm, 3 SQM Per Hour (4 Pass), Print On Almost Every Materials, Less Maintainess Cost, Low Ink Consumption Cost, Max. Printing Resolution: 2880 dpi 1440 dpi, Water Cycling Cooling System, CISS Built Inside Ink System, Automatic Height Adjustment With Sensor, Equipped With Vacumm Suction System, Image Format: Tiff, Bmp, Jpg, Eps, Pdf, CAD, Rip Software: Maintop, Photoprint. Ref-NO.: digital-printer-IMAX
used
Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.
used
Miter Saw for Aluminum / Wood / PVC, automatic, in excellent condition, working and with several spare discs. Pneumatic clamps and lubrication, integral casing with safety micro, machine equipped with refrigerant oil, air gun, 450 mm retractable blade.
used
Continuous plank gluing press Suitable for hardwood wood thickness: 11 to 45 mm. Max wood length 2600 mm Gluing bed length: 6 m. Cross-chain transport Angle transfer and loading in the press with side glue, PVAc glue press with bed 1.58 x 10 m., hot water heated, Bohqqiku Hydraulic unit with 15 kW, v-outlet saw cross saw with running Mechanization available for sizing Disrun Vakumm Stacking Device
used
ZEMAT PULSA ECO 500 impulse welding machine was built in 2019 in Poland. The compact machine with an open design is ideal for the efficient production of canopies, awnings, pergolas, roller blinds, banners, etc. The individual temperature control of the upper and lower sealing electrodes together with InvisiWELD technology produces strong, practically invisible seams with high precision. Furthermore, the operator has special hand tools at his disposal for the welding of, e.g. tabs, pockets and zippers. The ZEMAT PULSA EC semi-automatic impulse welder was implemented in production in 2023 and since then has been used for only a dozen tests. The total weight of the machine is 1800 kg. Technical specifications of the ZEMAT PULSA ECO 500 welding machine - machinable materials: PVC, vinyl, polyurethane (PU), polypropylene (PP), polyethylene (PE), rubber, acrylic, thermoplastic materials ...
used
Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.
used
Material: PVC // Screw diameter 52-104 mm (conical), counter-rotor, motor: 15 kW, capacity: 20 - 140 KG/hr.
used
Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.