ka used for sale

TECHNICAL SPECIFICATIONS Manufacturer: KAUTZ Description: Elliptical shaker screen for light material separation Type: Wet screening Type: OSK 2071/2-W Number of screen decks: 2 Year of Make: 2005 Feed capacity: approx. 150 t/h Dimensions screen deck (length/width): 7,100 x 2,000 mm Screening area: 2 x 14.2 sqm Number of steps: 2 Screen covering deck 1: Synthetic Screen Covering Deck 2: Synthetic Strainer pan: available Chute car: available SPECIFIC COMMENT - Stepped screen deck with shower for separating light materials (wood, coal) - Many adjustment options due to water supply - Optimal machine for simultaneous screening and cleaning of the feed material - Only machine included in the scope of offer

Horizontal machining center Kafo HVC 500 :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 18i MB Tool connection: BT 50 Spindle power: 25Kw Number of spindle revolutions: 10000 Number of tools: 60 X Shaft Stroke: 720mm Y Axis Stroke: 650mm Z Axis Stroke: 650mm Rapid feeds linear axes X Y Z: 48m/min Pallet size: 500x500mm Pallet type: indexed Pallet degrees: 0.001 Maximum load allowed: 800Kg High cooling pressure: yes Pressure value: 20bar System with external tank with filter: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 4035mm Width: 5170mm Height: 3000mm Weight: 13000Kg

Packaging machine Kallfass Universa 5050; good condition; cleaned and tested; Frame size 500x500mm; Passage height 100mm; with Tunnel Compact 650 S; Passage width 650mm; Passage height max.400mm; Cooling fans L-sealer Kallfass Universa 5050; good condition; cleaned and checked; frame size 500x500mm; product hight max.100mm; with tunnel Compact 650 S; working width 650mm; working hight max.400mm; cooling unit.

Keksmaschine gebrauchte

sheet width: 2050 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 4 kW weight of the machine ca.: 1550 kg range L-W-H: 2,5 x 1,57 x 1,21 m Electric 380 Volt: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and ...

Horizontal Käde packaging machine

Used labeling machine made by Exelsior Karvina s.r.o. (Czech Republic)

The Kärcher HDS 895 is a powerful, heatable hot water high-pressure cleaner (steam jet) of the professional class. Technical Highlights & Performance Operation: The device runs via a 400V three-phase connection. Temperature: It reaches temperatures of up to approx. 98°C in hot water mode and has a special steam stage that can deliver up to 155°C. Pressure & Flow: Depending on the model variant (e.g. S, SX or Super), it delivers a working pressure of around 30 to 180 bar at a flow rate of approx. 400 to 1000 l/h. Special feature: In the steam stage (above 98°C), the pressure must be limited to a maximum of 32 bar for safety, for which a special steam wand is often required.

Karl Schnell KS P9 vacuum filling machine, performance max. 3200 kg/h, filling pressure max. 22 bar, portioning size 1 g - 1000 kg, portioning speed max. 700 port./min, hopper cappacity 300 liters

For sale are used KALT cheese vats: Manufacturer: KALT Year of construction: 2001 and 2004 Design: closed, double-O Material: Exterior: Stainless steel (V2A) Inside: Copper Includes control cabinet and Siemens HMI (touch panel)

Construction & Dimensions Floor space: Hall 15.35 m x 24.49 m plus canopy (depth 3.82 m). Roof pitch: The gable roof has an inclination of 15° (canopy 10°). Weight estimate: The steel structure is estimated to be approx. 18 to 22 tons (pure steel weight without cladding). This serves as the first basis for your logistics planning. Base & façade The hall was originally mounted on a 40 cm high clinker brick base. Since this is omitted during dismantling, a corresponding plinth (e.g. made of precast concrete elements or masonry) would have to be prepared on site for the reuse of the original wall panels before reassembly in order to maintain the connection heights of the façade. Foundation & Clearance Areas Foundation planning: The hall was founded on strip foundations with a 15 cm base slab. Since the soil conditions at your new location can vary, the foundation statics s ...

Karl Schnell B22 Process Automat Typ 250, suitable for the production of low to middle viscous emulsions and suspensions, such as Soup, sauce and gravy, Injection brine, preparation of process materials, etc, power supply 3AC 400 Volt, 50 Hz, 52 Ampere, 26 kW.

Bandsäge Karl Müller Cutting width 70 cm Cooling 2 cutting speeds Weight 400 kg Length 2 m Width 0.80 m Height 1.20 m

modernized machine with new LTG-StoreControl P control system Control expansion optionally possible Exterior Dimensions: Overall height 8,700 mm Overall width 3,500 mm Installation depth 1,580 mm 51 carriers with a payload of 350 kg each in clear usable dimensions: H = 255 mm W = 3,050 mm T = 520 mm Chain jump 305 mm 51 galvanized intermediate floors Total payload up to 19,000 kg Side table in 990 mm above OKFF with NiRo worktop, 315 mm deep Colour scheme grey Motor power drive 1 x 3.8 kW / 400 Volt subject to errors, technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in D, A and other neighboring countries

AUTOMATIC PROCESS MACHINE FOR LIQUIDS FOODS, KARL SCHNELL TIPO: 250 Technical description: Machine number: 25162 Year: 2001 Two knives Nominal volume: 300L Dimensions: 1500 x 1150 x 2350 mm QUALITY HAS A NAME Customers demand equipment that meets their individual requirements and they demand machines that produce a high quality end-product at lowest possible costs. Combining these fundamental considerations with technical know-how, KS builds machines that are simple to use and extremely durable. Main application field of the B 22 is the production of low to middle viscous emulsions and suspensions. Typical applications are the production of: Soup, sauce and gravy Ketchup aund mayonnaise Fish farce Injection brine Pate and tureen As well as The reconditioning of rework The preparation of process materials, such as additives and spices for the sausage-, petfood- and processed cheese p ...

We offer an LTG-TowerMax L 67.9-245-3050-610-4360 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 4360 mm Overall width 3380 mm Overall depth 2312 mm Total machine payload up to 2 x 33,950 kg 29 carriers for up to 245 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 3050 mm T = 610 mm Usable height up to 50 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high; with automatic lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.75 kW / 400 Volt Door drive 0.25 k W Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring cou ...

cascade separator, vibrating chute, vibrating conveyor, vibrating chute, vibrating chute used Manufacturer: KARL MERZ AUFBEREITUNGSTECHNIK Type: ULA 570/50-650 built: 1987 Gutter approx. 500 x 1000 mm 2 vibrators each 0.84 kW Overall dimensions approx. 1300 x 1300 x 1400 mm e.g. For the separation of granules with shape defects, e.g. angel hair, double granules This cleaner was used for plastic granules. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

We offer LTG-TowerMax L 20.0-250-1250-825-6900 storage systems modernized by us with a completely new StoreControl L control system. currently still 5 of 6 identical machines available Exterior Dimensions: Height 6900 mm Overall width 1580 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 78 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 50 to 750 mm Start of the operating opening in 860 mm above OKFF, then 1000 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installati ...

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble

Pallet stackers Fork length 80 cm Lifting height 2.04 m Weight 200 kg Electrohydraulic 380 V 16 A 1 swivel castor stiff

We offer LTG-TowerMax L 20.0-250-1250-825-5900 storage systems modernized by us with a completely new StoreControl L control system. currently 4 identical machines available Exterior Dimensions: Overall height 5900 mm Overall width 1580 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 68 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 50 to 750 mm Start of the operating opening in 860 mm above OKFF, then 1000 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation  ...

Refrigeration system with a fan Year of construction: 1993 Power : 2,2KW Capacity : 41,6 dm³ further information can be found on the type plate

refrigeration system with a fan Year of construction :1990 Power : 1,1kW Voltage : 220/380 V 50Hz Amperage : 6.6 /5.8 V For further information, please refer to the type plate

We offer a paternoster LTG-TowerMax P 13.8-300-46-210-6500 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,500 mm Overall width 3,670 mm Installation depth 1,560 mm 46 carriers with a payload of 300 kg each in clear usable dimensions: H = 210 mm W = 3,050 mm T = 520 mm Chain jump 254 mm 23 galvanized intermediate floors for 150 kg payload each Total payload up to 13,760 kg Side table in 1000 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/dark grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries

Refrigeration system with a fan Year of manufacture : 1993 Power : 3,2/2,0 kW Voltage : 380 V 50Hz Amperage : 6.4 / 3.7A Capacity : 41,5 dm³

Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...

Angle welding machine with conveyor belt, Fabr. Kallfass

Curve 90 for transport track ,Fabr. Kaak

Bread/cake slant, double-sided, mobile

Pretzel strand machine , Fabr. Kasper Universe

KAWASAKI 3CP180L-AC03 palletizing robot manufactured in 2018, increases the productivity of production lines in many industries by automating the process of palletising products. This extremely reliable KAWASAKI CP180L packaging robot is distinguished by its short cycle times, wide movement range and 4 dynamic axes with high axial speeds necessary to quickly move goods with a total weight of 180 kg. Outside the working area of the machine there is a convenient and easy-to-use controller, whose high funcionality allows the robot to be used comprehensively in the production process. The KAWASAKI industrial robot weighs 1600 kg. Technical specifications of the KAWASAKI 3CP180L-AC03 robot - number of axes: 4 - arm reach: 3255 mm - maximum payload: 180 kg - palletising capacity: approx. 1800 cycles/hour - axis movement range JT1 axis: ± 160° JT2 axis: +95° / -46° JT3 axis: +15 ...

We offer LTG-TowerMax L 20.0-250-1250-825-10.000 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Height 10,000 mm Overall width 1600 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 90 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 65 to 750 mm Start of the operating opening in 865 mm above OKFF, then 850 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, pictures of an identical machine ...

Heat-Recovery system (storage tank 1000ltr with internal heat exchanger) -for drinking water -function Qü = ca. 7 kW (inox-screw-heat exchanger-activity 7 kW) - refrigerant- access/discharge 77°C / 50°C - drinking water- access/discharge 40°C / 50°C (complete from 10°C to 50°C- at small drinking water-need is the gotten energy automatic for heating transfer) -for heating-function Qc = 31 kW + 9 kW =40kW Energy buffer storage 1000/800 volume: 1.000 ltr diameter: 800 mm diameter with insulation: 960 mm storage height: 2.290 mm total height: 2.590 mm

We offer an LTG-TowerMax L 40.0-500-1300-863-6000 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6,000 mm Overall width 1630 mm Installation depth 2980 mm Total payload machine up to 2 x 10,000 kg 30 carriers for up to 500 kg payload each, in clear usable dimensions: W = 1300 mm T = 863 mm Usable height up to 50 to 750 mm Start of the operating opening in 870 mm above OKFF, then 845 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey//blue, carrier galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

KAWASAKI 3RS050N-BC02 palletizing robot built in 2018, is designed to increase the productivity of production lines in many industries by automating the process of palletising products. This 6-axis packaging robot features a compact design with a sturdy arm and a long reach, guaranteeing fast handling of goods weighing a maximum of 50 kg. The total weight of the machine is 555 kg. Technical specifications of the KAWASAKI 3RS050N-BC02 industrial robot - number of axes: 6 - arm reach: 2100 mm - maximum payload: 50 kg - axis movement range JT1 axis: ± 180° JT2 axis: + 140° / -105° JT3 axis: + 135° / -155° JT4 axis: ± 360° JT5 axis: ± 145° JT6 axis: ± 360° - axis motion speed JT1 axis: 180°/s JT2 axis: 180°/s JT3 axis: 185°/s JT4 axis: 260°/s JT5 axis: 260°/s JT6 axis: 360°/s - repeatability: ± 0.06 mm - mounting: floor, ceiling - power requirement:  ...

Belt conveyors GF 2250-680/600 with 2 x 90° pushers (from slides) Make: Kannegiesser like new, showroom machine Year 2014 Length: 2.250 mm Belt width: 600 mm Total width: 680 mm incl. 2 piece pneumatic 90° off valves Wxh = 550 x 320 mm incl. 2 PCs. supports, height OK belt + 1000 mm Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 2250 Nominal / outside width in mm: 680 Belt width in mm: 600 Driven: YES scope of delivery: including supports without side guides, including 2 pneumatic 90 ° pushers / pushers 550 x 320 mm (WxH) Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & ...

Kannegiesser GF 2500-890-800 RA1255 The Kannegiesser belt conveyor is from 2014 and is in a new (used) condition. It has 13 white striped straps made of 2-layer PET on an edged, expiring stainless steel sheet construction. Technical data: Manufacturer: Kannegiesser Type: Belt conveyor 800 Built: 2014 Condition: very good (used) Engine: fully functional Length: 2500 mm (measurement stretched over everything) Belt width: 50 mm (13 pieces) Scaffolding width: approx. 890 mm Height/strip curve: from 175 mm up to 750 mm Number of support feet: 2 pieces on rollers Load: 30 kg Conveyor speed: 0.6 m / s constant Drive: Spur gear motor Electrical data: 0.37 kW 230 / 400 V 60 Hz Deflection drum: diameter = 50 mm, stainless steel Belt reel roll: diameter = 50 mm, stainless steel Belt: 2-layer PET belt, white Design: CNC - lasered and edged stainless steel sheet construction. Material: 1.4016  ...

Kannegiesser belt conveyor belt conveyor with DUO-Pusher GF 2500-680-600 RA1309 The Kennegisser belt conveyor is from 2015 and in good (used) condition. In addition, it is 2500 mm longer and equipped with a DUO pusher (sorting pusher). The pusher is used to sort laundry items according to selected criteria. The folded laundry item is pushed by a pusher plate onto a following conveyor or a roller conveyor. 2 support feet are included in delivery. Technical data: Conveying length (NL): 2500 mm Framework width (NB): approx. 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 850 mm +/- 90 mm Number of support feet: 2 pieces Conveying speed (v m/s): 0.1 - 1.1 m/s, reversing operation with FU Drive: Normal Motor Electrical data: 400 V / 50 Hz Deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-layer PVC belt, black, smooth Year of construction: 10/2015 Special featur ...

Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer

Key data: 530 mm

KELCH KALI-tec A tool presetter built in Germany in 2004 is a high-tech device for accurate measuring, presetting and simultaneous tool shrinking. The state-of-the-art KELCH tool presetter with integrated induction coil is offered with equipment that includes e.g. the electronic measuring system with intelligent image processing KELCH EasyVision and the KELCH Easy Webset computer software for tool measurement and inspection. The tool length is determined by the setting adapters before the chuck heating phase. The KALI-tec A tool measuring and presetting machine then automatically sets the tool exactly to the target length during the chuck opening phase by heating, while for more complex measuring tasks or tools made of high-speed steel the KELCH i-tec shrink-fit device shrinks the tool to the target length using intelligent calculations and pre-positioning of the setting pins. Tech ...

We offer an LTG-TowerMax L 67.3-210-3050-813-5450 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 4360 mm Overall width 3380 mm Overall depth 2312 mm Total machine payload up to 2 x 33,950 kg 29 carriers for up to 245 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 3050 mm T = 610 mm Usable height up to 50 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high; with automatic lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.75 kW / 400 Volt Door drive 0.25 k W Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring cou ...

5 swivel manifolds 8-fold, electric, 160 t/h Tel. 01715213204