ka used for sale

Kaplan turbine used 50 kW, 3 m³, height 2m Speed 150 / 460 RPM 70 HP, built in 1963 Generator Schorch GmbH Type KT7280S - DB05 Z-Z 50 Hz, 770 RPM 55kW

1 Post Saegeblaetter (8 Stueck) for Kaltenbach All Saegeblaetter either re-ground or Unused. 1 square diameter 560mm 5 stub diameter 500mm 2 square diameter 400mm Hole in the middle 50mm

Can depalletizer Kahl & Schlichterle type can DP 20000 capacity: up to 20.000 cph The palletizer is adjustable for one pallet size (has to be clarified) incl. manual loading per forklift construction in stainless steel pallet lifting system automatic carboard layer removal layer magazine control panel incl. Siemens S 7 The can depallitizer will handle two pallet formats and five different can sizes

KAHL & SCHLICHTERLE fun filler for 12 spirit glasses Filling volume per round: 20 ml - with 40 ml the filler simply fills two rounds The filler is powered by an electric motor with battery and must be switched off and on again by hand after filling.

Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammeröfe ...

Metrohm 688 Karl Fischer Drying Oven with Drying Unit

Edge Gluing Machine ESSOR KAM 100 with 100mm working width! Kantenanleimmaschine - Edge Gluing Machine ESSOR KAM 100 Serial-No. 161608 Working width max. 100mm Kaltleim / Cold Glue System

compressor air refrigeration dryer air dryer Brand: KAESER TE141 Year of manufacture: 2013 Motor voltage Pgebmsyfpbtsrc H Dlsg 400V/50Hz 3 phases 4.5 a/min Max. pressure: 16.00 bar Delivery capacity 14.32 m3/min Operating pressure max: 16bar Refrigerant: R134A 2.1kg Air-cooled dryer Refrigeration dryer Connection: Compressed air G2 (internal thread) Connection: Condensate drain: DN10 Dimensions: Length: 1530mm Width: 1060mm Height: 1513mm Weight: 660

The SEW-EURODRIVE KA97 / TDRE132M4BE11 system is a powerful bevel gear motor that is specially designed for applications with high torques and compact space conditions.

Stock Laminating machine, Type: 134R5-1500 P, Year 2001, Max.Size: 1420x1620 mm, Min.Size: 500 x 500 mm, Printers sheet:, Paper from about 180 g/m², Carton from about 400 g/m², Carrier sheet:, corrugated cardboard up to about 7.0 mm thickness, Cardboard/Chipboard from 0.6 mm

SCREW AIR COMPRESSOR model KAESER SK 19 with Vertical tank Lt. 750 second hand machine in Excellent working condition motor power Hp 15 ( Kw 11 ) working pressure bar 10 volt. 380/50

Centering Machine - KUHN KAZ 80-2 -Max. workpiece diameter / round 80mm -Max. workpiece diameter / square 60mm -Centering Length - Endless -Clamping unit with self-centering vice -Spindle drive 1.8 KW -Drill chuck -Chip tray -Connection cable -Forklift insertion for transport Dimensions: LxWxH 1.7x0.7x1.4 meters / Weight 600 kg

refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately

<br>With near head UNION SPECIAL Maximum sack length: 120 cm<br><br><br><br>Verf Gbar: now

Working width 1000 mm Still in operation: Yes Available: immediately

used, kpl. 1 year warranty, plate size 800 x 800 mm, 95 plates, closed drain ( 4-hole), 30 mm cake thickness, pressure 15 bar, capacity approx. 1350 liters, filter area 95m2, dimensions 7500 x 1300 x 2000 mm, weight approx. 7 to

used lime silo material: Metal

roller cutter, overhauled, working width: 110 cm, roller diameter, 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifting/lifting device, side edge control, dancer roller, load control with control brake, surface needle, Siemes S5 Still in operation: Yes Available: immediately

used, kpl. 1 year warranty, plate size 800x800 mm, 50 plates, open drain, 25 mm cake thickness, pressure 15 bar, capacity approx. 660 liters, filter area 53m2, dimensions 5500 x 1600 x 1200 mm, weight approx. 5 to

Working width 1350 mm

A fireproof card box approx. 500 kg of own weight. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and erro ...

used, kpl. 1 year warranty, built in 1994, plate size 800x800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 5500 x 1500 x 2200 mm, weight approx. 6 to

used, kpl. 1 year warranty, plate size 800 x 800 mm, optional 60 - 85 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity 800 - 1100 liters, filter area 64 - 90 m2, dimensions 7000 x 1500 x 2400 mm, weight approx. 11 tons

40 bar booster KAESER 300 / 400 m3/h

Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor

used, kpl. 1 year warranty, plate size 500 x 500 mm, 45 plates, open outlet, 20 mm cake thickness, pressure 15 bar, capacity approx. 171 liters, filter area approx. 18m2, dimensions 3500 x 900 x 1200 mm, weight 1.5 to, optionally with hand pump or motor hydraulics, with or without filter cloths

used, kpl. 1 year warranty, plate size 400 x 400 mm, 25 plates, open outlet, 25 mm cake thickness, capacity 75 liters, filter area 6.5 m2, pressure max. 10 bar, dimensions 2000 x 800 x 1600 mm, weight approx. 800 kg

used Telecam pal of karl Storz

Overhauled: 2018 Year of construction: 1985-2017 Saw band 275-315 mm Engine power 11.0 KW Cutting speed 225-1200 m / min Square maximum working range: 15-80 mm Round maximum working range: 15-90 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 5500mm x 1400mm x 1600mm The machine is suitable facilities and construction for mass editing of non-ferrous metals and is the predecessor of KASTOwa M9 KASTOspeed M9. The saw line is currently in preliminary line status and can be visited only in original condition without function. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Amon ...

used, kpl. 1 year warranty, plate size 250 x 250 mm, 15 plates, open outlet, 15 mm cake thickness, pressure max. 15 bar, capacity 10 liters, filter area 1.5 m2, dimensions 1300 x 500 x 1300 mm, weight 300 kg, optionally with manual or motor hydraulics, with or without feeding pump and Piping

max. tensile force: 20 to, max. stroke 1250 mm, max. cutting speed: 7m/min, maximum return speed: 25 m/min. max. workpiece 580 mm, max. tool 90 mm, clearing: 2 pieces, round-clock table, automatic workpiece feeder device, year 1960

Refurbished: 2018 PLC: Siemens S7 Saw blade 550 mm Engine power 11 KW Saw blade feed 0-3000 mm / min Cutting speed (SB 500 mm): 4500 m / min (SB 550 mm): 5100 m / min Square maximum work area: 170 x 170 mm Flat maximum work area: 380 x 75 mm Round maximum work area: 165 mm Supply length 10-1000 mm Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) about: 2800mm x 1600mm x 2200mm (Magazine) about: 3300 x 2200mm x 1800mm Footprint Lxw 6100 mm x 2200 mm The machine was overhauled 2014 in our House. Among others were renewed following points: -New PLC control -New Elgo positioning system -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Overhaul Menzel minimal lubrication system -Replacing common wear parts -Overhaul of t ...

used, kpl. 1 year warranty, plate size 300 x 300 mm, 10 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 20 liters, filter area 1.5 m2, dimensions 1200 x 600 x 600 mm, weight 400 kg, optionally with manual or motor hydraulics, available now

DAIKIN Cold water unit Air-cooled, 180KW,Y.O.M., cold mite 134a. Compressor one pcscrew, make Daikin. Price € 8,000,-

Saw blades: Carbide / HSS, 450 mm Power: saw motor, 4,0 / 5,5 KW Speed: stepless, 10 - 60 min-1 Cutting speed: Blade (450 mm), 7-43, or 15-75 m / min Saw height control: continuously variable, electronically Square 90° maximum working range: 140 x 140 mm 45° max: workspace flat 90° Max: 240 x 80 mm 45° max: work area round 90° Max: 150 mm 45° max: supplies length easy stroke: 5-1000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Gewicht(Säge)CA.:3100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm footprint Lxw: 2500 mm x 1300 mm, the machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very a ...

Overhauled: 2018 Year of construction: 1991-20167 Band saw blade 250-285 mm Motor output 5.5 KW Cutting speed 35-160 m / min Square maximum working range: 15-60 mm Round maximum working range: 15-70 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max. 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 7500mm x 1400mm x 1600mm The machine is suitable due to their facilities and construction for mass editing of steel and is the predecessor of KASTOwa C7 or C9 KASTOspeed. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Among other things, following points are renewed: -New PLC control Siemens S7 -Conversion to Siemens HMI - ...

Overhaul year 2018 Year of construction 1995-2005 Saw blades Carbide / HSS 450 mm Power saw motor 5.5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed Blade (450 mm) 15-75 m / min Saw height control infinitely adjustable electronic 5 Workspace square 90° Max: 140 x 140 mm Workspace flat 90° Max: 240 x 80 mm Work area around 90° Max: 150 mm Supply length 5-9999 mm Supply AC servo max speed: 500 mm / s (Saw) approximate weight: 2100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm Footprint Lxw 2500 mm x 1300 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very accurate length tolerances. The machine will be over ...

Saw blades Carbide / HSS: 450 mm Power: 4,0 / 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed (450 mm) blade: 7-43, or 15-75/min Saw height control adjustable full electronic Square 90° maximum working range: 140 x 140 mm 45° max.: Flat workspace: 90° Max: 240 x 80 mm 45° max: work area round: 90° Max: 150 mm 45° max: supplies length easy stroke: 5-2000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Approximate weight: 3600 kg Dimensions Lxwxh: 3500 mm x 1300 mm x 2100 mm Lxw surface: 3500 x 1300 mm? Technical description of 401 k PPS / PPS 451 NA 2000 retrofit 401 k PPS / PPS 451 retrofit high-speed sawing machine for steel. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free o ...

used, kpl. 1 year warranty, built in 1999, plate size 1200 x 1200 mm, 70 plates with 50mm cake thickness (3500 liters capacity + 160 m2 filter area) or 90 plates with 30 mm cake thickness (2700 liters capacity + 205 m2 filter area), open outlet, pressure max. 15 bar, dimensions 9000 x 2000 x 2400 m m, weight approx. 18 to, PP - drip plate (motorized)

KARL MAYER RS-3-MSUS-V RS MSUS-V High-performance warp-knitting machine with course-oriented weft insertion for the production of heavyweight fabrics and composite fabrics GEO-TEXTILE FABRIC 540CM 6 gauge Year 2007 Serial number 96700 Running condition (Currently producing fabric for bullet proof jackets) Product features • Production of grid structures or closed fabrics • Combination with substrate fabric according to the product application • Strong knitting elements and yarn feeding guides for the processing of thick, high-performance yarn materials • Special feeding elements for the production of fabrics with fiberglass, carbon and other high-performance fibers possible Karl Mayer Warping beamer DS 21/30 Year 1997 Running condition and video is available

TURNING ANGLE: 180°, BILLET SIZE: QUADRATE: MAX. 240 MM, SQUARE: MAX. 210 x 250 MM, U & I FORM: MAX. 400 MM, WEIGHT: MAX. 5500 KG,

Chamber filter pressing rack Filox uses 1200 x 1200 with approx. 100 records

Chamber filter pressing rack Netzsch uses benefit length: 3,500 mms record transport unilaterally not available the machine served as a spare part bearer, is entire incl. wheel tins.

Stock # U2333-1 Used carbon steel jacketed paddle type mixer by Kates (PL) type 2M1.6. Total volume 1700 l, working volume about 1600 l. Mixing chamber is designed for work on pressure up to 0.14 bar in working temperature range from 5 - 40 C. Mixer has mixing shaft with 6 paddles and two rods working close do front walls. Shaft is driven by el. motor 55 kW, 1483 rpm in Ex design, through gearbox with reduction i = 72.71, what gives working rotation of shaft up to 20.39 rpm. Mixing chamber is covered with carbon steel cooling jacket with volume 75 l. Working pressure on jacket up to 0.5 bar at temperature in range from 5 up to 40 C. Mixer has top inspection manway with bolted lid and diameter 500 mm. Central bottom discharge with pneumatically operated valve. Mixer is mounted on carbon steel supporting construction. Machine is able to work as Ex II3GcIIA T3 /ATEX. Mixer is equipped wi ...

working width 1000 mm Still in operation: Yes Available: sofort

Slitter rewinder, reconditioned, working width, 110 cm, winding diameter: 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifing in and out mechanism, Web guide unit, tension control unit with adjustable brake, overall perforation, Siemens S5 Still in operation: Yes Available: sofort

Kahl Mixer Continuous Mixer Conditioner for Pellet Press Gr.3 used Manufacturer: Amandus Kahl Model: Gr.3 / Gr. III with drive motor ABB motors 380/660 V; 1470 rpm; 30 kW. For continuous conditioning, mixing of bulk materials with fissics as dosing for pellet presses . Use: - For continuous mixing of feed with liquids and steam - For melasses dry chips - In general process technology for moisturizing granular / powdery substances - General: for (all) mixing tasks in which liquids must be entered into solids Tech. Information Manufacturers - Total length approx. 2964 mm - Diameter approx. 550 mm - Total height approx. 900 mm - Distance inlet/outlet (center/middle) approx. 1950 mm - Inlet/output approx. 300x300 mm - Weight approx. 800 kg + motor approx. 245 kg Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

With stitching head UNION SPEZIAL Maximum sack length: 120 cm Available: now

overhauled in 2007 spare parts Still in operation: Yes Available: sofort