internal grinding used for sale

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 213 mm -Mounting: Hole shaft cone Ø 44-54 mm -Type designation: not available -Dimensions total Ø 230 x 85 mm -Weight: 10.3 kg

connected load frequency: 230 V output: 1,2 KW taper diameter: 19mm mm turning speeds: 1000 - 3000 U/min roll surface width: max. 100 mm roll length: max. 120 mm weight: 2,8 kg range L-W-H: 430 x 280 x 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding range: 2 - 20 mm sharp cornered angle min./max.: 90 - 135 Grad connected load: 230 V weight of the machine ca.: 8,6 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle, grinding spindle -Machine spindle: Grinding spindle Precision spindle -Type: unfortunately without type designation -Roll: Ø 80 x 160 mm -Total dimensions: Ø 80 x 270 mm -Weight: 3.5 kg

width of the strips: 25 mm band length: 762 mm dimensions of grinding wheel: 125 mm Table tiltable up to: 45 Grad table surface area: 130 x 130 mm connected load frequency: 230 V total power requirement: 0,3 kW weight of the machine ca.: 9 Kg dimensions of the machine ca.: 650 x 360 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 762 mm internal diameter: 304,8 mm width: 36 - 42 - 64 mm Unused grinding wheels Ø 762x304,8 mm! 2x36 mm width Norton 1x64 mm width Norton 1x42 mm width Krebs 4x64 mm width Krebs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 1220 mm band speed: 1140 m/min. : 0,62 x 0,4 x 0,35 cm total power requirement: 1,5 kW weight of the machine ca.: 0,04 t dimensions: 0,97 x 0,67 x 0,37 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With matching spacer rings according to photos. Scope of delivery according to photo 1.

Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle, grinding spindle -Manufacturer: Fortuna, grinding spindle precision spindle -Type: 15.UJ60 64 110 -Dimensions: see photos -Total dimensions: Ø 60 x 455 mm -Weight: 6.7 kg

Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: Jung, machine spindle -Type: MP 5z -Speed: max rpm -Recording: Dimensions see photos -Dimensions total: 460/210/115 mm -Weight: 16.2 kg

Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: Jung, machine spindle -Type: MP 10z -Speed: max rpm -Recording: Dimensions see photos -Dimensions total: 545/210/120 mm -Weight: 23.5 kg

drill diameter: 1,5 - 25 mm lip angle: 40 - 180 ° 6-jaw-chucks: various equipment: manual included: Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling various equipment (see pictures) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, thread M60 see photos -Whetstone: Dorfnerwerk type 5A 100-JOT8-UEH 400 x 40 mm -Transport dimensions: Ø 440 x 85 mm -Weight: 32.6 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, thread M60 see photos -Whetstone: Dorfnerwerk type 5A 100-JOT8-UEH 400 x 30 mm -Transport dimensions: Ø 400 x 80 mm -Weight: 28.7 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: Dorfnerwerk Type 5A 120-JOT8-UEH 400 x 20 mm -Transport dimensions: Ø 430 x 80 mm -Weight: 26.4 kg

grinding diameter: 610 mm grinding length: 3000 mm centre height: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310015 Type of machine Cylindric grinder Make STANKO Type 3M193/149 Build in 1988 Max. grinding diameter 610 Max. grinding length 3000 Grinding wheel diameter 700 Grinding wheel widht 75 Total Power (KW) 30 Additional information Incl. 2 staedys The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250 mm grinding length: 650 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Glauchau Type: SI 6/3 CNC brand: Siemens CNC model: Sinumerik Year of make: 1997 CNC controlled Maximum grinding depth: 250 mm Grinding diameter: 650 mm ø Rapid traverse: 10 m/min Speed: 50 - 500 RPM Inner grinder X (inner grinding device): 155 mm Length displacement interior grinding device on the table: 540 mm Tool grinding device Z (table move): 700 mm Circulation diameter: 650 mm ø Grindig diameter for internal grinding: 10 - 500 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Grinding/calibration line Editing: from above and below 2 motors with 18.5 KW each Cardan drive Sanding belt dimensions mm: 2,620 x 1,180 Vacuum carpet

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: 400 x 40 mm, unfortunately without type designation -Transport dimensions: Ø 400 x 85 mm -Weight: 31.1 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, see photos -Grindstone: 420 x 60 mm, unfortunately without type designation -Transport dimensions: Ø 420 x 87 mm -Total weight: 37 kg

grinding diameter: 1400 mm grinding length: 3500 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310013 Type of machine Super finishing machine Make NAXOS UNION Type WT 140/3500 Build in 1975 Max. grinding diameter 1400 mm Max. grinding length 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell a bus machine Prochera DSB. Year of construction 2005. 2-sided spindle fi.30 x max. 220mm. Main motor 1.1 kW. Buerste included. Weight 90 kg. Available the same.

Grinding range: 400 x 200 mm Magnet table: 400 x 175 mm Height adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm. Equipped with: - Coolant device - Band filter - Hydraulic system - Operating instructions Country of origin: Germany Motor power: 1.5 kW Machine LxWxH: 2200 x 1500 x 2100 mm Machine Weight: 1100 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 62-69 mm / Left thread. -Grinding wheel: Ø 450 x 40 mm -Transport dimensions: Ø 450 x 140 mm -Total weight: 30 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 50-60 mm -Grinding wheel: Ø 225 x 40 mm -Shipping/Price: complete -Dimensions each: Ø 225 x 90 mm -Weight: 10.4 kg/piece

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 32-35 mm -Grinding wheel: Ø 210 x 40 mm -Transport dimensions: Ø 210 x 70 mm -Total weight: 4.3 kg

Washing screw stainless steel, sieve basket wash screw used, Manufacturer: unknown Diameter approx. 550 mm, Drive 1.1 kW Total dimensions approx. 6.5 x 1.3 x 1.7 m. The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.

! ENTER THE + WORLD! Conventional TSCHUDIN HTG 310 + with innovation and protection packages

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 44-55 mm -Grinding wheel: Ø 270 mm, see photos -Shipping/Price: complete -Dimensions each: Ø 270 x 80 mm -Weight: 9.7 kg/piece

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350,450 mm grinding length: 600 mm centre height: 175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Foto von bereits gelieferter Maschine m ...

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 3 kW -Grinding discs: Ø 400 mm -Operating voltage: 380 volts -Weight: 200 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1745 rpm -Grinding discs: max. Ø 315 mm -Operating voltage: 380 volts -Weight: 230 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 200 kg

MAKSYMALNA ŚREDNICA 320 MAKSYMALNY MODUŁ 6

MAX DIAMETER 320 MAX MODUL 8

I sell a bottom grinding machine Butfering FBS2 1100, built in 1977. Konfigurazion Shoe - Shoe. Working width 1100mm. Total weight 4000kg. Suitable for line. Construction with fixed work table height.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Peripheral speed: 45 m/s -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 290 kg

grinding stone, grinding pin -Recording: M12 -Outer diameter: 50 mm -Length: 65 mm -Quantity: 74 pieces -Sale: only complete set -Weight: 28 kg

grinding stone, grinding pin -for internal grinding machine -1 Collet chuck -Cone mount: Ø 53 mm -Grinding pins: various diameters -Outer diameter: 1-40 mm -Sale: only complete set -Weight: 6 kg

Specifications: - Grinding wheel diameter approx. 500 mm - Grinding wheel width approx. 50 mm - Grinding wheel bore approx. 127 mm - Disc speed 950 rpm - Drive 400 V / 3.3 kW - Working height approx. 800 mm - Working depth / protective depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.5 kW -Speed: 1430 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg

Grinding machine, angle grinder, lathe tool grinding machine, thread drill grinding machine, milling cutter grinding machine -Angle adjustment -grinding device -Disc: Ø 190 mm -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 700/700/H1400 mm -Weight: 275 kg

Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.

Prior sale reserved - errors possible Internal Reference Number: D-1143-2

Prior sale reserved - errors possible Internal Reference Number: D-1143-3

I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.