internal grinding used for sale

Werner & Pfleiderer model GK50UK internal mixer. Chamber volume 85 litre, Net volume: 60 litre (batch size approx 85kg), Tangential type rotors, Year of manufacture: 1971, Pneumatic hopper, Hydraulic drop door discharge with rotary actuator and hydraulic latch. Full unidrive gearbox (August Seegers), with Intermediate selectable 2 speed gearbox, 675 HP rating, rpm 1500/1340, Output 895rpm or 1340rpm. With 550kW, 980A, 1482 rpm motor (fixed speed) Rotor speeds - N895 = 51/47rpm, N1340 = 78/72rpm. Siemens PLC controls.

Farrel Bridge BR Mixer (Lab BR Internal Mixer) Capacity of chamber 1.6 litre RPM 1420/960 730/350 HP 25/17/12.5/8.5 Motor 380 / 420 volts With Gearbox Cooling water / steam Complete with Control Panel

Grinding line for frozen synthesis , Karl Schnell Packed , stored in Europe, ready to ship and install Featured for US CAPACITY Capacity up to 15 000 kg/h for the fresh process Capacity up to 8 000 kg/h for the frozen process Design for three shifts-operations 6 working days/week with 16 working hours/day RAW MATERIEL All raw materials temperature between -18°C and +15°C: - Pork and chicken liver - Pork pulmon - Atum viscera - MDM Max 19 000 cp @ 0°C Content : Pos.015 KS Lifting device DM-1500 type 632 Maximum load capacity: 1500Kg Designed for frozen raw material pallets Fitted with a safety fence Safety fence secured by 2 safety light curtains Pos.020 KS Breaker PB1 type 492 Single shaft breaker for frozen raw materials pallets Maximum height for frozen pallet: 1450mm Pos.085 KS Lifting device DM-800 type 632 Maximum load capacity: 800Kg Designed for Jumbo/ ...

Manufacturer: Timesavers Grindingmaster Type of Machine: Grinding Machine Model: 81 series Condition: used Machine Hours: 2963,9 h Find more here - / Contact us at -

A Grindingmaster wide belt sanding and brush deburring machine is available. Working width: 900mm, max. workpiece thickness: 150mm, belt speed: 20m/min, conveyor speed: 20m/min, table height adjustment: +/-75mm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 2000kg. The sanding brushes are defective. On-site inspection is possible.

GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps

Danoflex Ø 800 mm cylindrical abrasive grinding

Danoflex Ø 800 mm cylindrical abrasive grinding Max sandingwidth: 800 mm Main motor(s) power : 4.5 kW

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

Heavy duty refurbished grinder. Very robust construction. Rotor with staggered blades. Rotor diameter 400mm rotor length 700mm. Powered by 22kW electric motor. Complete with electrical panel with Siemens touch screen panel including inverter for the control of the grinder. This electric panel can also control a loading belt, exhaust fan, etc. The control was built in 2010 for internal tests and used for less than 100 hours. As an alternative, we can also fit a new e.motor 37kW on this grinder and manufacture a new control panel for the increased power at an additional cost. This special rotor with staggered blades is also particularly suitable for heavy applications and for grinding fibrous materials and textiles

ID3469 Simec LM2000 – Grinding line year/Baujahr 1999 Grinding line consisting of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12) Grinding line made of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12)

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Cylindrincal grinding machine, KNUTH RSM 750, interna/external, DRO, This machine can be inspected under power in our warehouse., Mimu Machine Tools, Gussago BS Italy

CNC cylindrical grinding machine, STUDER S31 CNC LeanPro, with Pictogramming, Distance between centers: 1000mm, Center heigh 175mm, Grinding Wheel head rotation (B) 360° (1°), 2 ext Grinding Wheels, 1 int Grinding Wheel, Ext Grinding wheel, 400 mm x 40 mm x 127 mm, overhauled spindle > see photos, Workhead, CM 4, 0-1000 RPM, CNC Fanuc, Programming: Pictogramming, Heidenhain linear encoders, This machine can be inspected under power in our warehouse in Gussago BS Italy

grinding diameter: 360 mm grinding length: 1600 mm centre height: 180 mm internal diameter: 0 mm grinding depth: 0 mm swing diameter: 0 mm total power requirement: 40 kW weight of the machine ca.: 10000 kg dimensions of the machine ca.: m K A R S T E N S (Germany) Universal CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3  ...

grinding length: 1000 mm centre height: 175 mm b-axis: 1 ° max. dia. of grinding wheel: 500 mm internal grinding spindles: 60000 U/Min c-axis: 0.001 ° weight of the machine ca.: 5.7 t dimensions of the machine ca.: 4.25 x 2.2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

internal grinding spindles: . centre height: 125 mm grinding length: 1000 mm grinding wheel diameter: 400 & 225 mm weight of the machine ca.: 3.1 t Internal grinding attachment with grinding spindle Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal cylindrical grinding machine TACCHELLA 715 UA, Information about technical data are not binding., Machine available subject to prior sale., Height centres: 150 mm, Distance between centres: 750 mm, Wheel dimension: 450x50x127 mm, Wheel speed: 1450 rpm - Variable and programmable, Spindle motor power: 7.5 Kw, Internal grinding spindle speed: 16.000 rpm, Weight: 3.600Kg

internal grinding spindles: . centre height: 240 mm grinding length: 2500 mm grinding wheel diameter: 750 mm Dimensions (L/W/H): 6000 x 3000 x 2500 mm weight of the machine ca.: 9 t Internal grinding attachment with grinding spindle Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle speed min: 9,000 Umd.min Max: 15.000 Umd.min Tip height min: 230 mm Max: 510 mm Spindle stroke: 210 mm Horiz. Table large: 700 x 1000 mm Table stroke: 1,800 mm Equipped with: - feed table - feed Hor. Grinding movement - coolant equipment - protection doors table

Internal cylindrical grinding machine with flat grinding device, VOUMARD 404 N2X2/700, See pictures attached

Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinder, center grinder -Image below: MK5 -grinding wheel mount: -Motor data: 0.3 kW 1380 rpm -Dimensions: 370/180/H480 mm -Weight: 36 kg

JUNG D22 / Internal Cylindrical Grinding Machine -Machine suitable for inner round + surface grinding -Smallest grindable bore 14mm -Largest grindable bore 150mm -Grinding length without face grinding device 250mm -Grinding length with face grinding device -6x workpiece speeds 46-270 rpm -Spindle box right/left swivel 30 degrees -Distance of the spindle axis over the center of the table 250mm -Largest workpiece spindle/grinding support distance 935mm -Spindle box / inclined position 30 degrees each -Work table / tilt forward/backward 5 degrees each -Hand/automatic operation -Taper grinding device -Bezel -Three-jaw chuck -Replacement grinding spindles Dimensions: LxWxH 2.8x1.5x1.8 meters / Weight 3500Kg

internal diameter: 340/440 mm grinding depth: 9999999999999999999999999 mm swing diameter: mm grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.geometrical overh ...

total power requirement:16,5 kW weight of the machine ca.:3,8 t

Inner diameter: 150 mm Grinding depth: 200 mm Table lift: 425 mm large oscillating circuit diameter: 250 / 420 mm Bore: 80 mm Table speed -infinitely-0.5 - 10 m/min Workpiece speeds: 125/176/246/350 rpm Spindle speed: 17000 rpm Total power requirement: 2.2 / 0.5 / 0.9 kW Machine weight ca. 2 t Space requirement approx. 2.40 x 1.20 x 1.45 m Control: conventional

grinding diameter: 0/ mm grinding length: 960 mm feed in: mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 0/ m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: min / max: 10 / 250 mm grinding depth: 400 mm external diameter: max. 380 mm swing dia.: 390 mm table:: table travel: max. 550 mm stroke of the table: min. 2 mm rapid traverse: 10 m/min table speed -stepless-: 0 - 10 m/min rough adjustment: 18 mm fine adjustment: 4 mm max. workpiece weight: 100 kg Workhead.: spindle head: B 6 DIN 55021 spindle turning speed - stepless: 15 - 1.500 U/min pivoting angle: +/- 30 Grad spindle bore: 50 mm power capacity: 2 kW internal grinding:: rapid traverse: 0 - 250 mm/min stroke: 70 mm power requirement: 3 kW total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 3,0 x 3,0 x 3,2 m Documents: exhaust fan: Fibaron paper band filter: Polo Fire extinguish system: Deugra Internal Grinding Machine BAHMÜLLER - JES 12 The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

MAX DIAM 200

internal diameter: 800 mm grinding depth: 500 mm swing diameter: 850 mm total power requirement: kW weight of the machine ca.: 6,4 t dimensions of the machine ca.: m Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max ...

x-travel: 400 mm y-travel: 250 mm workpiece height: 485 mm Control: ELESTA CNC 314 total power requirement: 10 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/mi ...

internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...

internal diameter: 2 - 40 mm grinding depth: 70 mm swing diameter: 285 mm total power requirement: 5,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: m Machine in good working condition, with new e-motor for the working spindle drive. Machine video: https://youtu.be/N95AzX9D_QY Max. Distance chuck flange - wheelhead 390 mm Accessories: Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kW Grinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kW Magazine Machine documentation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: max. 600 mm grinding depth: max. 800 mm grinding length: max. 600 mm control: Siemens 840 D grinding diameter - internal: max. 600 mm grinding diameter - cylindrical: max. 800 mm workpiece length - max.: 380 mm external grinding length max.: 600 mm travel - x1 axis: 150 mm travel - z1 axis: 1100 mm travel - x2 axis: 470 mm travel - z2 axis: 800 mm workpiece spindle: 8,5 kW turning speed range - stepless: 1-795 U/min Equipment / Accessories: Workpiece spindle unit (U/B1/L adjustment): - Travel (U-axis): 300 mm - Swivel angle (B1 axis): -0,5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Set-up speed (jogging): 10 rpm - Spindle head size A 8 according to DIN 55026 - Through-hole 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (overhung clamping) max. 800 mm - Workpiece length (clamped between centers)  ...

internal diameter: 20... 400 mm grinding depth: 315 mm internal grinding spindle rev.-stepless: 2640...16500 U/min work piece spindle speed: 40400 U/min table speeds: 0,18 m/min rapid traverse: 10 m/min table travel: 630 mm total power requirement: 16 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: m grinding diameter: innen / internal 20..400 mm / external 500 mm max. diameter of work piece: 500 mm max. grinding length: 315 mm cone grinding: 60 ° power drive of internal grinding motor: 7,5 kW rev’s of internal grinding spindle: 2640...16500 U/min power drive of face grinding attachment: 4 kW power drive of workpiece motor: 1,5 kW rev’s of work piece spindle: 40...400 U/min steplessly variable table traverse speeds: 0,1...8 m / min rapid movement of table: 10 m / min stroke table 630 mm max. distance between work piece spindle flange and grinding spindle: 1250 mm  ...

spindle turning speed range: 170 - 18000 U/min weight of the machine ca.: 7,5 t dimensions of the machine ca.: 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headsto ...

internal diameter: 150 mm grinding depth: 200 mm stroke of the table: 425 mm bore: 80 mm spindle speed:: 17000 U / min workpiece turning speeds: 125/176/246/350 U/min max. swing dia.: 250 / 420 mm total power requirement: 2,2 / 0,5 / 0,9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,40 x 1,20 x 1,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 1000 mm min. workpiece diameter-at internal hobbing: 100-500 mm workpiece length - max.: 500 mm control: Siemens Sinumerik 840 D swing dia.: 1250 mm Workpiece spindle flange diameter: 520 mm work piece spindle speed range: 0-440 U/min weight of the machine ca.: 25 t dimensions of the machine ca.: 5100 x 3034 x 4500 mm Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axis Equipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation The data for this ad was cr ...

Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.

A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible.

internal diameter: 80 - 900 mm grinding depth: 500 mm swing diameter: 1.000 mm Control: SIEMENS Sinumerik 802 solution line max. external grinding diameter Ø: 900 mm workpiece weight: 1.000 kg finishing spindle: : spindle taper: 60 mm power capacity: 15 kW turning speed range - grinding wheel: 1.500 - 3.500 1/min total power requirement: 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,7 x 2,9 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 250 mm centre distance: 600 mm Dimensions (L/W/H): 3600 x 1900 x 2100 mm weight of the machine ca.: 2,25 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible.