We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,266 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
various control cards CC 90 for ENGEL injection moulding machines
used
LS Machinery LGH 850 M-GC Injection moulding machine LS Machinery LGH 850 M-GC
used
LS Machinery ID1300HM Injection moulding machine LS Machinery ID1300HM
used
Netstal brand Clamping force [kN] 1000 - 2990 Year of production 2004 Injection weight [g] 200 - 499
used
Manufacturer/manufacturer: Arburg Typ/type: 420 C 1300-350 Year/year: 2008 Control/controller: Selogica Clamping force/clamping force: to 130 Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 45 mm Stroke volume/shot volume: 230 ccm spec. Spritzdr / injection pressure: 1670 bar General / General engine power: 22 kW Heating/heating power: 8 kW Dimensions/dimensions: 4.3 m x 1.6 m x 1.8 m Weight/weight: 4300 kg
used
many moldes available for Husky Glines and Hypets Husky Moog Servo Valve HPN 4952777 Compatible with Later Hypet & Hylectric injection molding machines, Hypets 4.0 & 5.0, Used in working order 6 Months Warranty (1) Piece available
used
Injection molding machine ENGEL ES570 for clamping forcé 125 Tons from 1999 in working conditions. Further information please contact. Good price for liquidation. Directly from the factory where they were working.
new
TO WHOM IT MAY CONCERN ; WE VE 2 PCS REBUILT COMPLETE BOSCH FUEL INJECTION PUMPS OF MERCEDES OM 424 LA AT OUR STOCK PUMPS ARE READY TOU USE . WE VE ALSO ADDATIONALY BELOW NEW SPARES FOR SAME ENGINE TYPE FULL 2 SETS FUEL PIPES 8 PCS COMPLETE INJECTORS 19 PCS BARREL AND PLUNGERS 1 FUEL PUMP GEAR AND FLANGE 48 PCS RECON COMPLETE INJECTORS HOLDERS 4 PCS PRE FUEL FEED PUMPS 1 PC OIL PUMP 2 PCS NEW WATER PUMPS 5 PCS REBUILT EXH GAZ TURBO CHARGERS K36-424 ETC ETC ETC ... IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .
used
Key data: 150 , 394 , 50
Manufacturer/manufacturer: Krauss Maffei Typ/type: KM 110-390 C1 Year/year: 1993 Control/controller: MC 4 Clamping force/clamping force: 1500 kN Holmabstand/Dist.Betw.Tiebars: 500 mm x 500 mm Disk size/platen size: 750 x 750 mm WZ height/mould hight: min 250 max 500 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 1060 mm Auger/screw size: 50 mm Stroke volume/shot volume: 442 CC / 394 gram PS Spritzdr / injection pressure: 1946 bar General / General engine power: 30 kW Heating/heating power: 14,8 kW Dimensions/dimensions: 5.5 m x 1.6 m x 2.10 m Weight/weight: 5600 kg Screen text: German Options/optional extras Core puller / core pulling: x 1 Air valve / air valve: x 1
used
We have many used Mitsubishi Injection pumps for sell. Condition of the units is seen on the pictures. We sell this units only to dealers Companys ore for export without warranty. All oure information is based on best knowing we can not ensure that al information given ar right and complete. We try oure best to provide you the best information of oure gears. We only sell to resellers or companies and export to the exclusion of warranty. Brand: Mitsubishi Heavy Industries Model: PS6-HL-50 Sparepart No.: 48270-00004
used
Krauss Maffei KM800-8100 MX Injection Moulding Machine With Robot 3300 gr(PS) Min-Max mould thickness : 500-1100 mm Distance between column : 1120 mm x 1000 mm Screw diameter : 95 mm
used
Negri Bossi NB 250 Injection Moulding Machine power output: 79kw Dimensions: 620014002000 weight: 10,560 kg screw size: 60 mm column spaces: 460460 mm plate dimensions: 860860 mm
used
Engel injection moulding machine old
used
Key data: 2000 , 491 , 50
Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: Unilog 4000 B Clamping force/clamping force: 2000 kN Holmabstand/Dist.Betw.Tiebars: 560 mm x 560 mm Disk size/platen size: 800 mm x 800 mm WZ height/mould hight: 200 mm max 520 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 970 mm Auger/screw size: 50 mm Stroke volume/shot volume: 540 CC / 491 gram PS spec. Spritzdr / injection pressure: 1822 bar General / General engine power: 30 kW Heating/heating power: 15.6 kW Dimensions/dimensions: 5.65 m x 1.45 m x 2.10 m Weight/weight: 10400 kg screen text/language: English additional equipment/additional equipment Core puller / core pulling: x 3 Lubrication lubrication / Central
used
Manufacturer/manufacturer: Arburg Typ/type: 420C 1300-250 Year/year: 1999 Control/controller: Selogica Clamping force/clamping force: 1000 kN Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm Disk size/platen size: 605 x 605 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 35 mm Stroke volume/shot volume: 144 CC / 132 gram PS spec. Spritzdr / injection pressure: 1820 bar General / General Engine power: 18.5 kW Heating/heating power: 6,5 kW Dimensions/dimensions: 4.3 m x 1.7 m x 1.8 m Weight/weight: 3180 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robot
used
Manufacturer/manufacturer: Angel Typ/type: 330/75 HL - V Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 750 kN Holmabstand/Dist.Betw.Tiebars: -. Disk size/platen size: 660 mm x 560 mm WZ height/mould hight: min 200 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 650 mm Auger/screw size: 40 mm Stroke volume/shot volume: 201 cc spec. Spritzdr / injection pressure: 1600/2180 bar General / General Engine power: 15 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 3.8 m x 1.3 m x 2 m Weight/weight: 4900 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robots / robotic interface
used
Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 1100 kN Holmabstand/Dist.Betw.Tiebars: Disk size/platen size: 730 mm x 600 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 50 mm Stroke volume/shot volume: 251 cc spec. Spritzdr / injection pressure: 1300/2050 bar General / General Engine power: 18.5 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 4.8 m x 1.4 m x 2 m Weight/weight: 6000 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 2 Robots / robotic interface
used
Manufacturer/Manufacturer: Arburg Type/Type: 370C 600-250 Bau-year year: 1999 Control/Controller: Selogica Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 370 mm x 370 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 188 cc/158 gram hp Spez. Spray./injection pressure: 1900 bar General General Motor/Motor Power: 11 kW Heating/heating power: 8.1 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment
used
Manufacturer/Manufacturer: Arburg Type/Type: 370C 600-250 Bau-year/Year: 2000 Control/Controller: Selogica Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 370 mm x 370 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 188 cc/158 gram hp Spez. Spray./injection pressure: 1900 bar General General Motor/Motor Power: 11 kW Heating/heating power: 8.1 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment
used
Manufacturer/Manufacturer: Arburg Typ/Type: 370C 800-250 Bau-year year: 2003 Control/Controller: Selogica Clothing kraft/Clamping Force: 800 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 34 mm Lifting volume/shot volume: 144 cc/132 gram hp Spez. Spray./injection pressure: 1820 bar General General Motor/Motor Power: 15 kW Heating/heating power: 8.6 kW Dimensions: 4.2 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap
used
Manufacturer/Manufacturer: Arburg Typ/Type: 420C 1000-350 Bau-year year: 1999 Control/Controller: Selogica Clothing Power/Clamping Force: 1000 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate's Platen Size: 650 mm x 650 mm WZ Einbauhoehe/Mould hight: min 225/275 mm Oeff-weg/opening stroke: 575 mm Plate distance max/Max. Open Daylight: 800/850 mm Snail/Screw size: 45 mm Lifting volume/shot volume: 206 cc/194 gram hp Spez. Spray./injection pressure: 1670 bar General General Motor/Motor Power: 18.5 kW Heating/heating power: 10.5 kW Dimensions: 4.4 m x 1.7 m x 2 m Weicht/Weight: 5100 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core Pulling: x1 Euromap
used
Manufacturer/Manufacturer: Arburg Typ/Type: 420C 1300 kN-350 Bau-year year: 1999 Control/Controller: Selogica Closing Power/Clamping Force: 1300 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 605 mm x 605 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 182 cc/166 gram hp Spez. Spray./injection pressure: 1670 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weicht/Weight: 5100 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core Pulling: x1 Euromap Vario
used
MACHINE IN GOOD CONDITION NEGRI BOSSI CANBIO Injection moulding machine
used
Manufacturer/Manufacturer: Arburg Typ/Type: 320S 500-350 Bau-year year: 1998 Control/Controller: Selogica Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 320 mm x 320 mm Plate Groesse/Platen Size: 446 mm x 446 mm WZ Einbauhoehe/Mould hight: min 225 mm Oeffning weg/opening stroke: 350 mm Plate distance max/Max. Open Daylight: 575 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 182 cm/153 gram hp Spez. Spray./injection pressure: 2050 bar General General Motor/Motor Power: 18.5 kW Heating/heating power: 6.3 kW Dimensions: 3.7 m x 1.2 m x 2.1 m Weicht/Weight: 2600 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap Rdzenie x1
used
Key data: 500 , 94 , 30
Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 50-270 per Bau-year year: 1997 Control/Controller: NC 4 Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 355 mm x 355 mm Plate Groesse/Platen Size: 540 mm x 540 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 30 mm Lifting volume/shot volume: 144 cc/128 gram hp Spez. Spray./injection pressure: 1890 bar General General Motor/Motor Power: 11 kW Heating/heating power: 7.5 kW Dimensions: 3.6 m x 1.2 m x 1.8 m Weicht/Weight: 2500 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap Core train x1 Air valve x1
used
Key data: 500 , 128 , 35
Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 50-270 viva Bau-year year: 1997 Control/Controller: NC 4 Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 355 mm x 355 mm Plate Groesse/Platen Size: 540 mm x 540 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 30 mm Lifting volume/Shot volume: 106.5 cc/95 gram hp Spez. Spray./injection pressure: 2573 bar General General Motor/Motor Power: 11 kW Heating/heating power: 7.5 kW Dimensions: 3.6 m x 1.2 m x 1.8 m Weicht/Weight: 2500 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Air valve x1
used
This Husky H225 RS 55/50 Injection Moulding Machine was manufactured in the year 2013 in China and has 62435 hours. The machine has a closing force of 2250 kN and a screw diameter of 50 mm.
used
Key data: 600 , 52 , 25
Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 60/420-200 Bau-year year: 1999 Control/Controller: NC 4 Control Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 600 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 25 mm Lifting volume/shot volume: 61 cc/52 gram hp Spez. Spray./injection pressure: 2740 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8.3 kW Dimensions: 3.7 m x 1.6 m x 2.1 m Weichtt/Weight: 3900 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core train x1 Air valve x3
used
This Sumitomo Demag Systec 1300 1500-9500 Servo Injection moulding machine was manufactured in the year 2019 and has 17522 production hours, of which 3695 are heating hours.
used
ENGEL 120 ton year `2014 x 2 units injection molding machines -Model : VC330/120 TECH PRO -Clamping force : 120 ton -Screw diamter : 30mm -Manufactured year : 2014
used
This HAITIAN JU650II Injection moulding machine was manufactured in the year 2018 in China. The machine has a clamping force of 6500 kN and a screw diameter of 80 mm.
used
Arburg 270C-400-250 + robot Multilift and conveyor belt (3) Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 30 Shot Weight [g]: 97 Injection Pressure [bar]: 2470 Clamping Force [kN]: 400 Tie Bar Distance [mm]: 270x270 Platen Size [mm]: 446x446 Mould Height min. [mm]: 200 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 18,4 Workinghours [h]: 75000 Dimensions [m]: 4 x 2,2 Weight [kg]: 1980kg + 300kg robot CR - CORE PULL R - ROBOT
used
This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2001 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. It comes with a linear robot ENGEL ERC 23/2-EA (2002). Production hours are at 98167.
used
This Krauss Maffei PX 121-540 injection moulding machine was made in the year 2017. It is equipped with a Krauss Maffei MC6 control unit. The machine has a clamping force of 1200 kN and screw diameter of 40 mm.
used
This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with an ARBURG SELOGICA control unit. The machine has a clamping force of 800 kN and a screw diameter of 30-40 mm.
used
This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2001 in Germany. It is equipped with an Arburg control unit. The machine has a clamping force of 800 kN.
used
This ARBURG 470C 1500-675 Injection moulding machine was manufactured in the year 2003 in Germany. The machine has clamping force of 1500 kN, a Opening stroke max. of 500 mm and a Mould height of min 250 mm.
used
This ARBURG Allrounder 520 C 2000-675 Injection moulding machine was manufactured in 2002 in Germany. It is included a pallet protective fence (approx. 100 kg // 2000x1100 mm).
used
This Battenfeld HM 13000/9200/7700 Injection moulding machine was made in 2004 in Germany and has 67871 hours. The machine has a clamping force of 13000 kN and a screw diameter of 120 mm.
used
This KRAUSS MAFFEI 50-180CX Injection moulding machine was manufactured in the year 2013 in Germany. The machine has a clamping force of 500 kN.
used
Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro
used
This LS MTRON LGH170D-ES Injection moulding machine was manufactured in the year 2017 in China. This machine has a 1706 kgf/cm2 pf pressure. Contact us anytime for further questions.
used
This Battenfeld HM 10000 Injection moulding machine was manufactured in the year 2005 in Germany. The machine has a clamping force of 10000 kN.
used
This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN.
used
This Tederic DE360 Injection moulding machine was manufactured in the year 2018. It is equipped with a TEDERIC KEBA 2880 control unit. The machine has a conveyor belt of 3000 x 600 mm.
used
This Husky H225 RS 45/38 Injection Moulding Machine was made in the year 2013 in China and has 54744 hours. The machine has a clamping force of 2250 kN and a screw diameter of 38 mm.
used
This FERROMATIK MILACRON k-tec 40 S Injection moulding machine was manufactured in the year 2004 in Germany. The machine has a clamping force of 400 kN.
used
This HPM Hemscheid 750-250 Injection moulding machine was manufactured in the year 2000. The machine has a clamping force of 750 kN and a screw diameter of 36 mm.
used
Forms 9 pcs. for the production of Styrofoam Pins A package of professional injection moulds for the production of pins for polystyrene ( 9 pcs. molds from 12-36 sockets ) Name 1 St. 10 / h – 120 mm 12 Cold Channel 2 Wedks 10 / h – 160 mm 12 Cold Channel 3 St. 10 / h – 180 mm 12 Cold Channel 4 Squid 10 / h – 200 and 220 mm 12 Hot channel 5 Squid 10 / h – 240 and 260 mm 12 Hot channel 6 Wed.5 nails /70, 90,120, 140 mm 36 Cold Channel 7 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 8 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 9 Nail caps 36 Cold Channel
used
This Ferromatik Milacron ELEKTRA evolution / EE 30 Injection moulding machine was made in 2003 in Germany. It has a clamping force of 300 kN and a screw diameter of 18 mm. Operation hours are at 88999h.