We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,919 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Screw diameter: 95mm, distance between the bars: 900x800mm, max. opening path: 810mm, max. tool weight: 6.7t, operational pressure: 190bar, weight: 24t, with Industrial Robot FANUC M-16iL.
used
There are two Netstal S2400-1700 available, operational pressure machine 1/ 2: 210/ 150bar, injection pressure: 693kN, injection force: 2400kN, opening stroke: 0-510mm, nominal power machine 1/ 2: 123/ 133kW, weight machine 1/ 2: 16.2/ 15.8t, operational hours counter machine 1/ 2: 44,905/ 61,558h, year of construction machine: 2006/ 2010.
used
Connected load: 42kW.
used
Connected load: 40kVA.
used
Hydraulic operating pressure: 275bar, weight: 4.1t.
used
Injection pressure: 2057bar, clamping force: 3500kN, heating output: 30.7kW, weight: 16.4t, operational hours counter: 62,600h.
used
Clamping force: 750kN, opening stroke: 40kN, connected load: 18.5kW, weight: 7.5t.
used
Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation.
used
Clamping force 350t, clear tie bar width: 710mm, operating pressure: 190bar, weight: 16t, with documentation, an inspection is possible.
used
Clamping force: 750kN, injection pressure: 1730bar, motor power: 15kW, stroke volume: 116cm³, operational hours counter: 19,802h, with tools.
used
Clamping force: 420kN, closing force: 4620kN, max. opening path: 710mmm, tool installation height: 380-820mm, tool clamping palate dimensions: 1200x1100mm, Länge: 7900mm, Breite: 2200mm, Höhe: 2500mm, Gewicht: 22t.
used
With documentation, the machine should be tested.
used
Line pressure: 210bar, injection force: 1158kN, clamping force: 6000kN, opening stroke: 0-950mm, mould space: 500-1000mm, operational hours counter: 79,588h.
used
Screw diameter: 35mm, operating hours: 73,500h, on-site inspection is possible.
used
Distance between tie-bars: 520x520mm, screw diameter: 54mm, pump motor: 39kW, connected load: 44.9kW, weight: 6.63t, operational hours counter: 107,000h.
used
Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation.
used
Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.
used
Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.
used
Closing force: 550kN, opening stroke: 400mm, mould height: 250-650mm, column distance: 360x335mm, max. ejector stroke: 80mm, table dimensions: 565x540mm, max. tool weight: 600kg, screw diameter: 38mm, controls: Procan MD, length: 3250mm, width: 1140mm, height: 2040mm, weight: 2.25t, operational hours counter: 29,664h, with robot interface.
used
Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t.
used
Operational pressure: 210bar, weight: 4t, with documentation, without accessories.
used
Screw diameter: 50mm, closing force: 150t, length: 2849mm, operational hours counter: 102,537h, mit Dokumentation und Handling Sepro, the hydraulic hoses were renewed in 2021.
used
Closing force: 1550kN, distance between tie-bars: 500x500mm, plate dimensions: 750x750mm, tool opening path: 650mm.
used
Closing force: 180t, weight: 12.2t, operational hours counter: 24,492h, with Handling Sepro S 5.35, fence, conveyor and documentation, an inspection is possible.
used
Closing force: 800kN, screw diameter: 30mm, shot weight: 19.1-63.6g, operational hours counter: 54,185h, with documentation, without accessories or spare parts, was maintained regularly, an inspection is possible, but not under power.
used
Closing force: 1500kN, screw diameter: 60mm, stroke volume: 622cm³, opening stroke: 900mm, installation height: 300/600mm, weight: 7.6t, an inspection is possible.
used
There are two identical injection moulding machines available, closing force: 1750kN, screw diameter: 70mm, stroke volume: 690cm³, opening stroke: 1000mm, installation height: 350mm, weight: 10.5t, an inspection is possible.
used
Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.
used
Weight: 9.1t, the machine is leaking and the control card is missing.
used
Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.
used
Operational hours counter: 59,129h, with Handling PSA 2080.
used
Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible.
used
There are two Injection Moulding Machines Demag Ergotech System 250/630-1450 available, clamping force 250t, clear tie bar width: 630mm, operating pressure: 190bar, weight: 13.1t, year of construction machine 1/ 2: 2001/ 2006, with documentation, an inspection is possible.
used
Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible.
used
High-speed, high-precision thermoplastic automatic machine of a hybrid” type (electricity + hydraulics) with a feedback system. Installed in 2012, never used (new) PECULIARITIES: • The injection unit uses an AC servomotor to accurately dose the material. • Maximum injection speed – 700 mm/sec. • The machine of this series is ideal for high-precision casting of products for the electrical industry, as well as for high-speed casting of thin-walled products for the packaging sector.
used
Installed in 2012, never used (new) The machines in this series have two modes: standard and high pressure mode. In standard mode, the machine consumes a small amount of energy and develops a high injection speed. It is suitable for making PP or ABS products. In high pressure mode, the machine increases the injection pressure to produce products from materials that require higher pressure. Equipped with these two modes, the machine can work on various products. • Wide column spacing and long clamping stroke using square slabs. Convenient for a wide variety of molds. • The injection molding machines are equipped with the new FCS2100 controller with the ability to use options such as semi-closed loop or closed loop, user-friendly graphical interface, fast fault detection, central control of Internet connection.
used
Installed in 2012, never used (new) The machines in this series have two modes: standard and high pressure mode. In standard mode, the machine consumes a small amount of energy and develops a high injection speed. It is suitable for making PP or ABS products. In high pressure mode, the machine increases the injection pressure to produce products from materials that require higher pressure. Equipped with these two modes, the machine can work on various products. PECULIARITIES: • Wide column spacing and long clamping stroke using square slabs. Convenient for a wide variety of molds. • The injection molding machines are equipped with the new FCS2100 controller with the ability to use options such as semi-closed loop or closed loop, user-friendly graphical interface, fast fault detection, central control of Internet connection.
used
Injection Molding Machine Brand: Battenfeld, model: Macropower 1100/800 unilog B8, year: 2019. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
used
Description: Arburg Allrounder 221 Polytronica Drive Electric motor with hydraulic pump Approx. Onsite Dimension. (l x w x h): 1,200 x 500 x 500 mm, weight approx.: 150 kg
used
Control Type: CC200 Number of hours: 45,000 H Closing Closing force: 50T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Platform dimensions: 500 m x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm Injection: Screw diameter: 25mm Screw length: 24.8D cm3: 69 Bars: 2400 General: Motor power: 15KW Heating power: 6.8KW Options: Cores: 1 Robot interface: yes Bi metal: yes
used
INJECTION UNIT Screw diameter: 22 mm Calculated injection volume: 42 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 1830 bars CLOSING UNIT Closing force: 250 kN Opening stroke: 315 mm Mold thickness Mini / Max: 160 mm Max distance between tray: 475 mm Passage between columns: 280 x 280 mm Tray size: 410 x 410 mm GENERAL Quantity of oil: 120 l. Dimension: (WxHxD) 2.90 x 1.65 x 1.03 m. Weight: 1550 Kg
used
Control Type: DIXIT II Number of hours: 25,550 H Closing Closing force: 200 T Opening stroke: 560 mm Between columns: 610 x 610 mm Tray dimensions: 870 x 870 mm Mini/maxi mould: 280 x 580 mm Max gap between trays: 1040 mm Injection: Screw diameter: 32/55 Screw length: 25D/20.2D cm3: 116/511 Bars: 2205/1523 General: Motor power: 28.1kw Heating power: 15.3 kw /7.2 kw Closing weight: 10 tons Dimensions length: 6.1m Dimensions width: 1.9m Dimensions height: 2.35m Options: Cores: 2 Robot interface: YES Bi metal: YES Others: 12 HOT CHANNELS,
used
Type of control: NC4 Closing force: 420T Opening stroke: 710 mm Between columns: 870 x 710 mm Tray dimensions: 1200 x 1100 mm Mini/maxi mould: 380/820 mm Max gap between trays: 1530 mm Injection: Screw diameter: 70 mm Screw length: 20D cm3: 1212 Bars: 1877 General: Motor power: 45 kW Heating power: 31 kw Closing weight: 18T Options: Cores: 2 Robot interface: yes Bi metal: yes Others: wittmann robot
used
Control type: NC 4 Number of hours: 45,000 hours Closing force: 420 T Opening stroke: 710 mm Between columns: 810 x 710 mm Tray dimensions: 1200 x 1100 mm Mini/maxi mold: 380/820 mm Max distance between trays: 1530 mm Injection: Screw diameter: 60 mm Screw length: 20D cm3: 763 Bars: 1905 General: Motor power: 45 kW Heating power: 23.1 kW Closing weight: 18t Injection weight: Length dimensions: 8 m Width dimensions: 2.20m Height dimensions: 2.50 m Options: Cores: 2 Robot interface: YES Bi metal: YES
used
2005 model little used Very clean plastic injection machine Injection molding machine Engel Victory 500/150 Pro Tech Closing force - 150 tons Year: 2005 Column passage: 740 x 680 mold holder shelves Screw diameter: 40 Injection volume - 251 ccm Min/Max mold thickness: 300 Jacks: 1 Euromap: 500/120 Moving floor movement: 507 Min/Max die height - 300/900 mm Machine weight - 9600 kg Opening path - 600 mm Injection pressure - 1302 bar Machine with robot and safety cage Injection size - 231 g Roller dimensions - 750X520 mm Oil tank capacity - 450 liters
used
Closing force: 50 T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 mm x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm Injection: Screw diameter: 25mm Screw length: 20D cm3: 45 Bars: 2400 General: Motor power: 15 kW Heating power: 5.3 kw Closing weight: 3T
used
BMB 1000 T injection press Reference: 7500/100 Closing force: 1000 T Screw diameter: 110 mm L/D ratio: 22 Maximum material pressure: 1600 bars Injectable volume: 4650 cm3 Injectable weight (PS): 4400 g Injection speed: 2350 cm3 / sec Dimensions of the trays: 1660 x 1560 mm Distance between columns: 1110 x 1010 mm Machine weight: 62,000 kg
used
Manufacturer : ENGEL Model: VICTORY 200-45T Year of manufacture: 2005 Number of hours: 42500 h Closing force: 45 T Control Type: CC100 Opening stroke: 400 mm Distance between columns: 500 x 450 mm Tray dimensions: 500 x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm Screw diameter: 25mm Screw length: 20D Injection volume: 69 cm3 Injection pressure: 2400 bar Motor power: 15 kW Heating power: 12 kW Closing weight: 2.9 T Dimensions length: 3.4m Dimensions width: 1.3 m Dimensions height: 1.80 m Cores: 0 robot interface Bi-metal
used
Manufacturer : BILLION Model: 50T H310 Year of manufacture: 2000 Number of hours: 30600 h Type of control: DIXIT 1 Closing force: 50T Opening stroke: 270 mm Distance between columns: 580 x 520 mm Tray dimensions: 580 x 520 mm Mini/maxi mould: 180/360 mm Max gap between trays: 630 mm Screw diameter: 35 mm Screw length: 20D Injection volume: 168 cm3 Injection pressure: 2025 bar Engine power: 15KW Heating power: 9.4 KW Closing weight: 3.4 Tn Dimensions length: 3.5m Dimensions width: 1.17 m Dimensions height: 1.72 m Cores: 2 robot interface Bi-metal
used
SANDRETTO Serie nove T injection molding machine 300T E1300 Screw D63 / 863 cm3 / 1523 bar Between columns: 665 x 665 Aperture: 660 Mold thickness: min 230 / max 730 Dim trays: 980 x 980 Installed power: 55.5 kW Dimensions: 7055 x 2547 x 2160 Weight: 12900 kg Euromap 12 robot interface Auxiliary cores (PF and PM) Top dosage 2 socket boards 10-way stainless steel water box APEX robot