ingersol rand used for sale

Year of construction: 2000 Generator: 70 Ampere - multipulse Control: Mitsubishi - 64 bit CNC Travel (X, Y, Z): 700 x 1350 x 500 mm Working container (W x D x H): 1000 x 1600 x 550 mm Work table (W x D): 900 x 1500 mm Load capacity: 3000 kg Electrode changer: 10-fold pick-up linear changer Accessories: - CO2 fire extinguishing system - Cartridge filter system Status: obsolete Price: on request

Key data: 730 mm, 630 mm, 12 A

Made in Germany X-axis 525 mm Y-axis 400 mm Z-axis 375 mm Dielectric tank 400 L Machine dimension; W 2100 x D 2450 x H 2600 mm Weight: 4800 KG Work table: L 730 x W 630 mm Operating voltage 400 V - 50 Hz Current consumption 12 A Control voltage 230 AC/ 24 DC Back-up fuse: 25 A Moto software is missing Price basis: free loading

Inv. Num. : 6939 Type: S132 Producer: Ingersoll Rand Created: 2017 Parameters: Capacity:: 31500 l/min Operating pressure: 8.5 bar Speed: 2995 1/min Machine weight: 3400 kg Equipment: Compressed air dryer Ventilation

This INGERSOLL IG1300 PENTA (2017) Erosion machine was refurbished by PENTA in 2017. Operated by a BECKHOFF PENTA CNC Control it has 4-axes (X = 900mm / Y = 690 mm / Z = 550 mm / C = 360 degress). With table dimensions of 1150 x 950 mm it can operate with a table load of max. 4000 kg. It is still under power, in very good condition and can be inspected at any time.

Description: load hours 43.500 B/h Compressor re-storage at 55,069/32,985 B/h driving power to: 43 kW, flow rate: ca. 6.000 l/min, operating pressure: max. 8,5 bar, modelname / number: 2,273,050, year of manufacture: 2,001, Approx. Onsite Dimension. (l x w x h): 1,600 x 900 x 1,800 mm, weight approx.: 870 kg

Key data: 90 m³/min, 3 , 20

Ingersoll-Rand Oil Free Screw Air Compressor L90I A3.5 -14-16-50 pressure generators from 2014, complete (closed module) 1 available Class 0, 1,190 m3/h, 7 – 10 bar. Compressor Ingersoll-Rand L90I Manufacturer: Ingersoll-Rand Model: L90I A3.5 -14-16-50 Type: oil-free screw compr. Class 0 Serial Number: UCV1002567 Volume flow rate [m3/h]: 1,190 Output pressure [bar]: 7 – 10 Power [kW]: 90 Year of construction: 2014 Running hours [h]: – Weight [kg]: 2.210 Dimensions LxWxH [cm]: 310x160x235

Ingersoll Rand air compressor, model: NIRVANA N45, serial number: 2731162, year of construction: 2010, machine weight: 1048, 380/460 V, 3 Ph, 50/60 Hz, 10 bar, 45 kW, dimensions: 1600 mm x 1600 mm x 2200 mm.

Ingersoll Rand air compressor, model: NIRVANA N45, serial number: 2731163, year of construction: 2010, machine weight: 1048, 380/460 V, 3 Ph, 50/60 Hz, 10 bar, 45 kW, dimensions: 1600 mm x 1600 mm x 2200 mm.

Description: Y-axis (with electrode change): 675 mm Carrying capacity: 1000 kg Integrated C-axis 1/min: 10/20 Working head: Max. Head load: 100 kg Max. Distance between tool carrier plate and worktable: 575 mm Electrode changing system: Pickup plate magazine Magazine slots: 20 Drive and measuring system: Drive type: digital AC servo motors Travel speed X/Y/Z: 2000 mm/min Digital display: 0.001 or 0.0001 selectable Total amount of dielectric: 400 liters x-motion: 525 mm, y-motion: 400 mm, z-motion: 375 mm, control: Multipulse, table surface area l x w : 730 x 630 mm, weight approx.: 4,800 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 2,150 x 2,550 mm

Ingersoll Rand screw air compressor, model: S200300W/S2000-W7, serial number: UCV1012221, year of construction: 2016, 400 V, 3 Ph, 50 Hz, 200 kW, 1400 rpm, maximum working pressure: 7 bar, weight: 4190 kg, dimensions: 3050 mm x 1950 mm x 2050 mm.

Ingersoll Rand screw air compressor, model: SIERRA SL250 WC, serial number: UCV1011534, year of construction: 2016, 400 V, 3 Ph, 50 Hz, 250 kW, 1492 rpm, maximum working pressure: 7 bar, weight: 4870 kg, dimensions: 3050 mm x 1950 mm x 2050 mm.

Description: Table support 400 x 600 mm, digital display HEIDENHAIN weight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,800 x 2,300 mm

Description: machine number: 575158 control: Multipulse travels: X-axis: 550 mm Y-axis: 850 mm Z-axis: 450 mm table dimensions: 800 x 1100 mm max. table load: 2000 kg x-motion: 550 mm, y-motion: 850 mm, z-motion: 450 mm, control: Multipulse, table surface area l x w : 800x1100 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 1,650 x 2,800 mm

X-travel: 550mm, y-travel: 400mm, z-travel: 400mm, max. rotational speed: 42.000/min, tool holder: HSK-40E, number of tool places: 100, connected load: 38kVA, controls: INGERSOLL ANDRONIC 2060, with tool measuring probe device m&h and tool laser measurement BLUM, automation with 8x EROWA UPC-320x320 pallet places and 140 EROWA-ITS50 electrode holder places, one adapter pallet UPC to ITS in automation, one gripper for ITS 50 in automation and job management via MultiCellPro additionally one external JobManagement PC.

complete system from 4Jet to the edge deletion of thin film Solarzellengehoert originally, to the 2 sputtering equipment offered by us by Lakkoju H3200Randentschichtung • non-contact procedure without damage to the substrate, no micro-cracks • dry process with no grit, no chemicals, wenigerEntsorgungsvolumen, eco-friendly • effective decoating of TCO, semiconductors undRueckkontakten - 1000V-Test > 10 GOhm • no additional cleaning necessary • reproducible results • optional laser cleaning of the cut edges! • discharge layering zones can be flexible - Glastoleranzangepasst • all metal front or rear contacts (MO , Al, AG) • all major semiconductor (a-Si single junction/tandem junction, CIS, CIGS, CdTe) • all TCO layers (ITO, ZnO, SnO2) MEX molybdenum  ...

Description: Power: 900 W Idle speed oscillation rate: 4650 - 11000 1/min Idle speed: 240 - 570 1/min Oscillating circuit: 5 mm Grinding wheel diameter: 150 mm In a case With spare grinding wheels Various grit sizes P80, P150, most sanding discs have a grit size of P150 (almost all) Approx. 40 pieces Approx. Onsite Dimension. (l x w x h): 480 x 360 x 180 mm, weight approx.: 5 kg

Description: Various random orbital sanders , with mobile extraction unit , Additional accessories Sanding discs in various grit sizes, mostly unused Vacuum cleaner bags suitable for extraction system Including cabinet Approx. Onsite Dimension. (l x w x h): 1,200 x 1,000 x 1,900 mm, weight approx.: 100 kg

Description: Eccentric sander with dust extraction RUPES S 235 EP, power 2500 W, 230 V, with compressed air connection Approx. Onsite Dimension. (l x w x h): 700 x 700 x 800 mm, weight approx.: 10 kg

Description: RUPES orbital sander and dust extractor 230 V, 3500 W With compressed air connection Approx. Onsite Dimension. (l x w x h): 900 x 400 x 600 mm, weight approx.: 15 kg

- sheet metal cleaning machine for 2-, 3- and 4-edge sheets; smooth and perforated - for baking trays with 58cm width (58x58cm, 58x78cm, 58x98cm) - Dry cleaning with integrated brush lubrication - high output with up to 750 sheets per hour -Operator panel with status displays in national language -Daily and total piece counter, maintenance interval display -easy operation, care and maintenance -movable on castors with locks

Alu baking trays, with 3 sides rim, 580 x 780 mm

Black plate, with 3 sides margin

 Aluminium perforated sheets 3 edge NEW(10 pieces)Aluminium perforated sheets 3 edge 600 mm x 400 mmPerforated sheet 3 edge, edge height 23 mmRound perforation 3.0 mmMaterial thickness 1.5 mmNEWDedetails see picture

2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.10 SX02 ofen for 20 tins usable total area 10.00 m and 178 baking surface floor 1.00 m and 178 baking square measure floor 78 x 58 cm 2 ofen Totally total area 20.00 m and 178 - 40tins stove is in very good state general and thorough outdated. functions as anew. a very good steam. secondary circulation for the baking chamber. turbo-equipment. everything maagnetic pumps incl. Daub Thermooel-boiler arrangement with magnetic pumps including. 8 stuck anew stikkenwagen including. 80 stuck rand two rand alubleche sales incl. cargo and assembly on inquiry I also have to sell 2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.7 usable total area 7.00 m and 178 (7 auflage, high shelves) price on inquiry

We offer spare parts from uring spending randen JCB telehandler 540-70. Axles, transmission, hydraulic cylinder, arm, cab, carrier, frame Type: 540-70 Year of construction: 2003 Price upon request

Dresser Rand/Nadrowski condensing steam turbine B5S-6+G -SN 21124 from 2007 never used zero running hours for sale. Scope of supply: control pannel, generator, documents. turbine: Dresser Rand / Nadrowski type: B5S-6+G - SN 21124 el. power: 2600 KW running hours: Never used / sure plus steam consuption: 14,7 to/h at full load steam inlet pressure: 39 bar inlet steam temperature:397°C manufactured: 2007 generator: Indar type: BZK-630-S/4 powerrating: 3.575 KVA volts: 3.300 volts Hz: 50 Hz price on request: Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

Waterjet 2x3m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Used pumps either Knam/H2O 40HP alternative KMT/Ingersollrand SL4 30hp completely overhauled. New surcharge KMT SL5 classic 50PS/37KW 90.000,00 Construction training & service directly from the manufacturer, including

LDS Here we offer an LDS shaker system. V780 Shaker Specification: 685 x 490 x 860 mm (HxWxL) Weight 381 Kg Sine force peak 5115 N Random force RMS 4226 N Acceleration peak 1.9 m/s Mass of the moving element 4.7 kg Usable frequency range DC - 4000 Hz Maximum load capacity up to 100 Kg Dimensions 714 x 890 x 490 mm Air cooler included (38 Kg) Type: V780 Amplifier Input supply – three-phase 50/60 Hz: 380, 400, 415, 440 V60 Hz: 480, 500 V Output power 5 kVA Nominal output voltage 100 V rms (sine) Continuous output current 50 A rms (sine and random) Output current 150 A for 100 ms Switching frequency 150 kHz Modulation range DC to 10 kHz Total harmonic distortion typically 0.15 % Input sensitivity – differential output 1.0 Vrms for 100Vrms output Input impedance 10 kΩ nominal Amplifier efficiency > 90% Module efficiency 93 % Signal-to-noise ratio§ > 68 dB ...

Technische Daten: - Arbeisfläche 1250 x 1000 mm - Absaugstutzen Durchmesser 140 mm - Abmessungen L=1600, B=1000, H=750 mm - Elektroanschluss 230 V / 50 Hz - Druckluftanschluss 6 - 8 bar - verstellbare Standfüsse 750 - 1050 mm - 2 Steckdosen 230 V - 2 Druckluftkupplungen - Randabsaugung - werkstückschonende Holzauflage - seitlicher Absaugstutzen - Energieleiste mit Werkzeugablage - Hauptschalter und Schalter für die automatische Ansteuerung von Absauganlagen und Absperrschiebern - Standard: Absaugstutzen und Bedienseite rechts

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Technische Daten: - Arbeisfläche 2500 x 1000 mm - Absaugstutzen Durchmesser 160 mm - Abmessungen L=2850, B=1000, H=750-1050 mm - Elektroanschluss 230 V / 50 Hz - Druckluftanschluss 6 - 8 bar - verstellbare Standfüsse 750 - 1050 mm - 2 Steckdosen 230 V - 2 Druckluftkupplungen - Randabsaugung - werkstückschonende Holzauflage - seitlicher Absaugstutzen - Energieleiste mit Werkzeugablage - Hauptschalter und Schalter für die automatische Ansteuerung von Absauganlagen und Absperrschiebern - Standard: Absaugstutzen und Bedienseite rechts

Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until the last minute 02/2022 Modern AE immunoassay technology Meet clinical requirements with acridinium ester (AE) technology, which ensures the necessary flexibility and sensitivity for new and innovative assays. Comprehensive diagnostic clarification of various clinical pictures thanks to a test menu with over 70 different assays. Simplified inventory management and lower costs by using the same ready-to-use reagents on all ADVIA Centaur analysis systems. Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded during operation. Easier training and operation thanks to an intuitive, icon-based user interface. Fewer operator intervention because daily maintenance is low and the system does not need to be cleaned monthly or booted  ...

Complete sorting plant of Renholmen and RemaSawco The plant can be visited in operation and function until summer 2022. Refurbished in 1996 Power: 400/220 Volt Equipment: 1) Chain conveyor for sideboards and center delivery (buffer zone) 2) Equalization in front of the curve conveyor 3) Accumulation conveyor with curved conveyor 4) Decrypts 2 pcs. To arrange random wood sizes 5) Roller box and buffer table before handling piece by piece 6) Piece-by-piece feeder where the sorter pulls out what needs to be cut off at the top end 7) Sorting station and piecemeal feeding. For manual quality sorting and determination of residual pieces 8) Top-end trim station for manual decision on top trim 9) Conveyor for transport into the sorting hook chains. 10) Hook conveyor chain with steel hook for 40 containers. 11) 40 sliders for pushing down into the right container 12) 40 pieces of  ...

Comitrol 1700 with feed screws and exhaust mat. There are 12 Comitrol processors to meet production requirements and offer many configuration possibilities thanks to a wide range of power and evacuation devices. Each model is designed for a unique and continuous passage that does not require the intervention of an operator. Dimensional reduction is accomplished by cutting the product without any contact between two metal parts. The absence of random movement of the particles ensures a grinding of high efficiency in a single pass. The Comitrol model 1700 processor can receive all three types of reduction heads (shown on the left). It is recommended for fluid, dry and semi-wet products such as textured vegetable proteins, peanut butter, flour and cheese. Comitrol versatility: Various consistencies ranging from dry products to liquids to pasty products. Precise reduction in  ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1990 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut Roller conve ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 SN 1989-02-08 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut  ...

Case Dimensions(mm) Minimum Length 185 Width 140 Height 110 Maximum Length inf Width 460 Height 520 Three phase:415v,50hz 80psi (5.5bar) https://endoline-automation/714-semi-automatic-random-case-sealer/

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

Qty. 1 Second-hand JCO pipe press bending line Mfc.: Samyul, ROBO, Shinsung, ChangSong, Rotech, FANUC, Hyupshun, Ingersoll Built: 2003, 2008, 2009, 2013, 2014 Plate material: Mild steel Plate dim.: 16.0 x 5.2 x 0.08 m – L x W x T Pipe dia.: Φ400~Φ1650 mm Pipe Length: 6.0m ~ 16.0 m Scope of supply: JCO Hydraulic Press Tack Welder Machine Sealing Welder Pipe Heating & Rotating Device Inside Welder Outside Welder Calibration Presses Milling Cutter Cutting Machine Bevelling Machine Compressor

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

White onion peeling machine. The machine consists of three modules: a hopper from which the onion is transferred by a conveyor belt to the sorter. At the sorter there are two workers who sort the onions on both sides, put the usable ones in the holders and throw the damaged or spoiled onions onto the middle conveyor belt ordering them to evaporate. The onions suitable for further processing are conveyed in the incision holder by specially designed knives and then fall onto the rotating rollers. After turning the onion several times, a high-pressure air stream blows away the corresponding layers of the onion down to the white layer. The onion then falls on the sorting table, where it is picked up by an employee and placed in collective packages. Technical parameters: - manufacturer: GOLDEN MACHINE - type of machine: 2-row - Capacity: approx. 0.4 - 0.8 tons/h - year of production ...

Dresser-Rand steam turbine (new price 2.8 million EUR), unused and as good as new - built 2009 - inlet steam stream 53,000 kg/h - 1 generator type Syn. 3 phases - 60 Hz, 12.3 MW - 4,500 rqm / 1,800 rqm - gearbox RENK type TL-500, BJ. 2009, GEA surface capacitor, type 2/III/H, BJ 2007, 2 condensate pumps type Etanorm G080-400 G11, BJ 2007

3692 KW Dresser Tuthill Nadrowski Tandem Condensation Turbine (steam turbine)for sale. 58.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. Scope of supply: Steam turbo set and generator (6 KV). On request, generators with 10 to 11 KV are also available. A suitable capacitor costs 75,000 € extra. Not included: Control. Brand: Leroy-Somer Manufacturer: Tuthill Nadrowski Turbinen GmbH Type: LSA 56 BS 5- 4P Serial No.: 168233-1 Year of construction: 12-2001 Electr. Power: 3692 KW Power: 4625 KVA Voltage: 6000 V rpm: 1500 rpm Size (L x W x H): 3.10 m x 1.80 m x 2.70 m Weight: 10,000 kg Total output HD and ND turbine: 3692 KW. Total weight steam turbo set: 15 tons + 10 tons generator.

Haas TRO 140G Price: 110,000 € Machine No: 18767 Built: Number of baking tongs 140 , 2 baking places per pliers Upper engraving without Underengraving 5 x 5 mm Rand yes Tool 22°30' Power consumption: approx. 2.5 kw/h Gas consumption: approx. 24 m3/h Location: Germany The machine is used for the production of sweet, twisted squirrels with standard industrial size and flattop. Winders, conveyor belt, ready-to-wearer, metal detector and stacking table are included. The machine is in a well-maintained condition. The machine is currently stored. Haas, GAM, Steinhoff, Walter, Industry

Technical Features of this Boring Machine Manufacturer JOHNFORD Model BMC-110 Year 2012 CNC FAGOR 8055-MC Table Table Surface 1.400 x 1.600 mm. Table max load capacity 12.000 kg. Table Rotation (B Axis) Continuous (0.001º) Travels and feeds X axis – longitudinal travel 2.000 mm. W axis – Quill travel 550 mm. Y axis – vertical travel 1.800 mm. Z axis – cross travel 1.600 mm. Spindle nose to table center 550-2.150 mm. Spindle center to table top 0-1.800 mm. Controlled Axis X, Y, Z, W, B X/Y/Z rapid feed 12.000 mm/min W rapid feed 6.000 mm/min Cutting feed axis X/Y/Z/W 1-6.000 mm/min Table revolution – B axis 4 rpm Boring spindle Boring spindle diameter 110 mm. Speed Ranges 2 Turning Speeds 0-3.000 rpm Spindle power 22/25 kW Automatic tool changer Tool selection Bidirectiona Random shortest path Tool magazine capacity 60 Max tool diameter 125 mm.  ...

1015 KW Dresser counterpressure steam turbine for sale. 35.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. TUBRINE Brand: DRESSER-RAND (Nadrowski) Type: AVT 72 TW 17 Number: 16225-1 Electr. Power: 1015 KW Rated power: 1375 kVA Year of construction: 1995 (control units upgraded in 2008) Voltage: 400 V RPM: 1500 rpm Steam flow rate: 25 tons /h Dimensions (l x w x h): 4.50 x 2.40 x 2.30 m Inlet temperature: 253°C Inlet pressure : 18 bar Exhaust temperature : 152°C Outlet pressure : 5.0 bar Steam flow rate at the entrance: 25 tons/h Turbine weight: 11,000 kg Generator Brand: Leroy Somer Type: NWR 50 BL10-4P Electrical power : 1015 KW SWITCHBOARD Manufactured by TIL SA and updated in 2008 Schneider control

aschinella details Warehouse number 1105-03380 Machine Type Machining Center - Vertical Sigma brand Type MISSION 2 Year of construction 2002 Control type CNC Control FANUC 18 M Storage location FRANCE Country of origin Italy Delivery time by arrangement Freight base from location Technical details x-path 750 mm y-way 400 mm z-displacement 450 mm Table clamping surface 900 X 400 mm table load 600 kg Tool holder SK-40 ( DIN 69871-A) Speed range 6000 rpm Spindle pitch 15 kW torque 191 Nm Spindle cooling with cooling agregat Tool magazine with TELLER MAGAZINE Places in the tool magazine 16 pieces( RANDOM) Suit bolts DIN 69872-A Control FANUC 18 M Information Accessories: NC STEUREUNG FANUC 18 M