ingersol rand used for sale

Pressure: 7.5 bar Power: 132 kW Voltage: 380V/ 400V Frequency: 50 Hz

TECHNICAL DATA: Technical principle: Screw compressor Flow rate m3/min: 10.19 Working pressure max bar: 7,5 Total power installed kW: 63 Rotation speed max rpm: 1465 Weight Kg: 1480

TO WHOW IT MAY CONCERN ; WE VE NEW UNUSED INGERSOLL RAND 150T AT OUR STOCK . READY TO SHIPMENT MODEL : 150T MPF88R54-020 IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

TECHNICAL DATA: Technical principle: Screw compressor Flow rate m3/min: 8.49 Working pressure max bar: 10 Total power installed kW: 55 Rotation speed max rpm: 2182 Weight Kg: 1531

TO WHOM IT MAY CONCERN ; WE VE RECONDED AIR STARTING MOTOR INGERSOLL RAND SS815R ( 4W 5107 ) FOR CAT 3512 ENGINE MODEL SS815R / CAT NO 4W 5107 SERIAL NO SP010524028 MAX PRESS 150 PSI READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Key data: 860 , 2

v

USED INGERSOLL RAND NON-CYCLING REFRIGERATED AIR DRYER

Ingersoll Rand Man Rider Winch available for sale. Make: Ingersoll Rand Man Rider winch Model Number: FA51-MR24MK1G/06144 Serial Number: A015878 Year: 2010 Man Lift SWL: 6875 lb at 75 fpm at top layer Utility SWL: 11000 lb at 54 fpm at top layer Press: 90psig FLOW: 700 ROPE DIA: 3/4INCH Drum Size in: 15 Barrel Dia: 27 Flange Dia: 24Lgth

Engine Brand: PERKINS, Condition: USED, Working Hours: 7700 Hour(s), Engine Condition: Used , Starter Voltage: 12 Volt , , https://www.hamofa.com/stock/compressors/ingersoll-rand-p70wn-compress or-7-bar-used/42278, , = More information =, , Type number: P70WN COMPRESSOR 7 BAR

Key data: 250 , 4 , 45

Electr. Power: 250 KW Motor speed:1492 rpm Voltage: 400 V Weight: 5630 kg The compressors have been taken over in operational condition and are complete.

Ingersoll Rand D480IN-A Refrigerated air dryer 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Ingersoll Rand D480IN-A Refrigerated air dryer 2011, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Key data: 90 m³/min, 3 , 20

Ingersoll-Rand Oil Free Screw Air Compressor L90I A3.5 -14-16-50 pressure generators from 2014, complete (closed module) 1 available Class 0, 1,190 m3/h, 7 – 10 bar. Compressor Ingersoll-Rand L90I Manufacturer: Ingersoll-Rand Model: L90I A3.5 -14-16-50 Type: oil-free screw compr. Class 0 Serial Number: UCV1002567 Volume flow rate [m3/h]: 1,190 Output pressure [bar]: 7 – 10 Power [kW]: 90 Year of construction: 2014 Running hours [h]: – Weight [kg]: 2.210 Dimensions LxWxH [cm]: 310x160x235

Compressed air filter INGERSOLL RAND GP 2119 ( GP2119 ) Bj: 2006 60 m3/min 16 bar gebraucht, geprüft ! Dimensions: 650 x 650 x 1700 mm

Air Ratchet, Air Ratchet, with Torque Adjustment INGERSOLL RIM, CHARLES MAIRE BALD326L CM330462 ( BALD326LCM330462 ) Pmax: 6.3 bar speed: 390 rpm Tool holder: 3/8 New ! with underlays ! Dimension ( Air ratchet ): 410 x 50 x 42 mm Dimension ( Package ): 520 x 110 x 90 mm

Air Ratchet, Air Ratchet, with Torque Adjustment INGERSOLL-RAND, CHARLES MAIRE BALD32SL CM390468 ( BALD32SLCM390468 ) Pmax: 6.3 bar speed: 300 rpm Tool holder: 3/8 New ! with underlays ! Dimension ( Air ratchet ): 420 x 240 x 45 mm Dimension ( Packaging ): 520 x 300 x 90 mm

Pneumatic Ratchet, Pneumatic Ratchet, with Torque Adjustment INGERSOLL-RAND, CHARLES MAIRE BALD 3203 RD5 / 35 ( BALD3203RD5/35 ) Pmax: 6.3 bar Pmin: 4 bar Speed: 250 rpm Tool Holder: 3/8 New ! Dimension ( Air Ratchet ): 390 x 80 x 60 mm Dimension ( Packaging ): 520 x 110 x 90 mm

TO WHOM IT MAY CONCERN ; WE VE 1 PC REBUILT AIR STARTER INGERSOLL RAND ST 499 IC 03L AT STOCK. ( EX STOCK ) PLS FIND DETAILS ON BELOW TYPE ST 499IC03L SERIAL NO. SP110221056 MAX INLET PRESSURE 90 PSIG MADE IN USA IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY

Second Hand Screw Compressor Ingersoll Rand R37IE-A 37 kW, 7.6 bar at 6.46 m3/min. Built in 2013 with only 18,254 hours

The INGERSOLL RAND TH60 drilling rig is a versatile and powerful machine designed for various drilling applications. It is built with robust construction, advanced technology, and a user-friendly interface, making it suitable for both onshore and offshore drilling operations. The rig offers high performance, reliability, and safety features to ensure efficient and productive drilling operations. Specifications: Water Well Rigs - 2002 international with Cat engine, 18 speed, new front tires . Rig is 1979 TH60 with 5x6 garner denver punp with new gear and pump end. 640" of new 89mm6.1m(20´) 12mm 2 3/8" IF rod, two new stabelizers, new murphy fast plug. Rig is direct hyd so no air over hydraulic. Less prob easy to fix! There is a portable pump to use due to highway weight regulations. Find more here - / Contact us at -

Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from the manufacturer Ingersoll Rand – model TS3A, built in 2008. Technical features: Max Air Pressure: 175 psig (12 bar) Max. Air Inlet Temperature: 60 °C (140 °F) Cooling System: Air-cooled Operating Voltage: 400V/3Ph/50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant Oil Type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

test

Brand: Ingersoll Rand Type: 2339531 Kind: Compressor with Refrigerant Dryer Year of construction: 2011 Operating hours/meters: 6107 Weight: 188 + 27 kg Assets: 3 kW/ 4 HP Air pressure: 14 bar Electrical connection: 400/230V, Photos/film available: Photos available 10.2.197

for sale 5 compressors INGERSOLL RAND year 2004 at 2019 model: 2x units C70MK3 430 KW 1xunits MGP655D 48 KW 1xunits C700 100 630 KW 1xunits HKO 400 480KW

Compressors Nirvana oil-free variable speed screw compressors 55-75 kW it ran 19138 hours. Nirvana oil-free compressors, with a matching variable speed inverter and hybrid permanent magnet motor (HPM®), offer unparalleled energy efficiency at all speeds and outstanding reliability. They deliver ISO 8573-1:2010 Class 0 certified, 100% oil-free air for the most critical applications Find more here - / Contact us at -

Load 6000 kg, pneumat. Drive

Year of manufacture 2001 generator multi pulse - 70 amp + 100 amp booster Control Mitsubishi 32 bit - CNC travel (X, Y, Z) 900 x 1,780 x 550 mm Bowl (W x D x H) 1300 x 2200 x 730 mm workpiece clamping table (B x T) 1150 x 2050 mm accessories 13-fach pick-up linear changer, CO2 fire extinguishing status completely overhauled

Jig Ingersoll IG750 Bj1992; Travel 500 x 700 x 350 with 6-fold electrode changer for Erowa ITS copper + graphite electrodes.

OPS INGERSOLL GANTRY EAGLE 800 Year of construction 2013 EAGLE Powertec PC/NC Controller 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn Quick Programming Powertec Handheld Multifunctional Handheld Controller Manual EDM with Powertec Handheld EAGLE Powertec - Fine Finishing Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disc magazine Work container (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system incl. fire damper Electrode clamping system EROWA ITS ECOTEC Energy Saving Func ...

Key data: 800 mm, 670 mm, 500 mm

High-speed milling machine for graphite machining Year of manufacture 2004 with a lot of accessories such as collets, graphite vacuum cleaners, etc.

Key data: 13750 mm, 5000 mm, 1000 mm

Ingersoll MasterHead 5-Axis CNC Planer Mill Model : MasterHead Age : 2016 SERIAL NO.: 28806 (27-01) FEATURES: FANUC 31I 5-AXIS NEW 2016 DOUBLE HOUSING ADJUSTABLE RAIL AUTOMATIC TOOL CHANGER AUTOMATIC ATTACHMENT CHANGER 2-AXIS MILLING HEAD ATTACHMENT 5-SPINDLE UNITS TRAVELS: X-AXIS, TABLE TRAVEL 541.1" (13750mm) Y-AXIS, HORIZONTAL HEAD TRAVEL 196.85" (5000mm) Z-AXIS, RAM STROKE 39.37" (1000mm) W-AXIS, VERTICAL TRAVEL OF CROSS RAIL 98.42" (2500mm) A-AXIS, HEAD ROTATION, 360 DEGREE 360,000 POSITIONS B-AXIS, HEAD SWIVEL, 180 DEGREE 360,000 POSITIONS SPECIFICATIONS: TABLE SIZE, JOINED 137.79" X 509.4" (3500 x 12940mm) TABLE SIZE, UN-COUPLED FRONT 137.79" X 255.5" TABLE SIZE, UN-COUPLED BACK 137.79" X 253.9" DISTANCE BETWEEN TABLE SECTIONS 39.37" DISTANCE BETWEEN COLUMNS 147" RAM CROSS SECTION 23.62" X 23.62" MAXIMUM HEIGHT TABLE TO RAM FACE 127.95"  ...

OPS 550 from the company OPS INGERSOLL Funkenerosion, built in 2008. the machine includes adjustable feet and 3 chucks. Find more here - / Contact us at -

Control PC-NC Dialog Travel X/Y/Z: 1000/1510/700 mm C-axis 30-fold electrode changer Hirschmann clamping system Bearing surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

4 pieces of adjustable jaws INGERSOLL for face plateChuck jaws for lathe chuck, mechanical clamping device, clamping blockNo: 39.02.10000 / 501.397Jaw width 70 mmJaw length 180 mmJaw carrier height 150 mmBase plate 325 x 265 mm- Step jaws for turning as rotary and drilling jaws- Jaw adjustment via trapezoidal threaded spindle- Jaw support with 6 recesses 40 x 30 mm for fastening- Distance between recesses 280 x 133 and 220 x 90 mm (center)Dimensions L x W x H 325 x 265 x 215 mmWeight per jaw 36.5

SPECIFICATIONS Free Air Delivery 70.7cfm/2002lpm Pump 3000 cast iron NO. of Cylinders 3 Compression Stages 3 Free Speed (rpm) 780 Oil Limit alert Switch STANDARD Auto Condense Drain NO Motor Size 15kw/20hp Power Type 415v 50Hz electric Engine N/A Drive Type Belt Working Pressure 175psi/1200kpa Starter Star Delta Starter Constant/ Dual Controls STANDARD Centrifugal Unloader STANDARD Air Tank Capacity (L) 445L Mounted Type Tank Mounted Weight (kgs) 750 Dimensions Lxlxh (mm) 1900x1100x1540 NOise Level dB(A)1m 86.2

EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg

x-travel: 550 mm y-travel: 400 mm z-travel: 400 mm Control: INGERSOLL ANDRONIC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017, featuring a robust vertical machining center design. It boasts a high-speed Fisher HSK E40 spindle with speeds up to 42,000 rpm and a 32-tool magazine. The machine includes a 4/5-axis tilting rotary table, enhancing its versatility for complex machining tasks. Consider the opportunity to buy this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine.

This 3-axis OPS INGERSOLL OPS 600 was manufactured in 2001. It features a work spindle speed range of 5000-40000 and a tool magazine with 12 positions. The machine includes an extraction system for oil mist or dust and a Teka filter system. Ideal for high precision milling, consider the opportunity to buy this OPS INGERSOLL OPS 600 vertical machining centre. Contact us for more information about this machine.

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...

This 5-axis INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain TNC 530 control, a 15 kW spindle, and 100 tool slots. With travel dimensions of X: 550mm, Y: 850mm, and Z: 450mm, this vertical machining centre represents a robust opportunity for precision machining. Only machine is included. Yaskawa robot and other parts of the automation shown in the video not scope of supply. Contact us for further details regarding this vertical machining centre.

This 3-axis OPS INGERSOLL 600 vertical machining center was manufactured in 2000. It features a travel range of 635 x 365 x 345 mm, a maximum table load of 1000 kg, and a high-speed spindle ranging from 5000 to 40000 rpm. The machine includes a tool magazine with 12 slots and an Andronic 2000 control system. Consider the opportunity to buy this OPS INGERSOLL 600 vertical machining center. Contact us for more information about this machine.

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

This 5-axis OPS INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain Control TNC 640, a high-frequency spindle with a speed range up to 42,000 rpm, and a 32-slot HSK-E40 tool changer. The machine offers a traversing speed of 30m/min and traversing paths of 550x400x400 mm. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL High Speed Eagle V5 machine we have for sale. Contact us for more information.

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

This 4-axis OPS INGERSOLL Gantry 1200 was manufactured in 2007. It features a 3000-liter dielectric capacity, machine feet, two heavy-duty pallets, and a 3R clamping system. Ideal for precision die-sinking EDM applications. Contact us for more information about this machine.

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...