industrial motor power used for sale

Panel bender Brand : FinnPower Mod. EB4 - 2150 max length = 2150 mm. Minimum length between folds = 350 mm Max width between folds = 160 mm. Maximum length = 2150 mm. A few new boards are also supplied with the machine

Key data: 15 KW, 400 V

EC Power Gas CHP XRGi 15G-TO Electricity and heat generators, unknown year of manufacture, unknown operating hours, with controller, without buffer memory and q-Network Controller. 15 KWel, 400 V / 50 Hz. Manufacturer: EC Power Model: XRGi 15G-TO Type: Gas CHP Serial Number: 40181104 Power [KWel]: 15 Power [KWth]: 32 Power [KWgas]: 55 Year of manufacture: unknown Operating hours: unknown Weight [kg]: 650 Dimensions LxWxH [m]: 1.40 x 0.80 x 1.30

This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details.

Manufacturer: Wolf Power Systems Model: GTK 50E0 Year of Manufacture: 2021 Type of Machine : CHP UNIT Condition : Never used, never even connected CE Certified: Yes Technical Specifications • Engine Type: Hoeckle HMG 434 S • Generator Type: Marelli MXB-E 225 MA/4 • Fuel: Natural Gas H (Erdgas H) • Electrical Output: 50 kW • Thermal Output: 90 kW • Power Consumption: 146 kW • Gas connection pressure range: 25 to 60 mbar • Maximum operating pressure: 4 bar • Maximum coolant inlet temperature: 90 degrees C • Rated voltage: 400 VAC 3PH 50Hz • Supply fuse: 100 A • Protection class DIN VDE 0470: IP 22 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Brueckner Model: Power-Predry HDVB3 CF 20/2 Year of Manufacture: 2016 Application: Thermal treatment of flat textile webs Working Width: 600 mm min. to 2000 mm max. Web Speed: 2.5 m/min min. to 50 m/min max. Drive Side: Right Operating Side: Right Number of Drying Fields: 2 Field Lengths - Infeed conveyor belt: 2.4 m - Infeed tower: 0.7 m - Drying fields: 1.6 m (with 1 heating and ventilation section) - Outfeed tower: 0.7 m Ventilation and Heating - Ventilation System: Classic-Flow with adjustable flaps for upper and lower airflow - Heating Medium: Gas - Circulation Temperature: 75 to 150 degrees C - Exhaust Air Volume: max. 6000 m3/h Electrical and Safety Data - Operating Voltage: 400 V AC, plus/minus 5%, 50 Hz - Control Voltage: 230 V AC, 50 Hz / 24 V DC - Signal Voltage: 24 V DC - Noise Emission: equivalent continuous sound level at workstation, A-weighted: ...

This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.

This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm.

; Gross weight [kg]: 690

TIG-TIG Welding Machine Cebora Power TIG 1640 DC HF DC TIG/MMA welding power source. Inverter Welding Machine (MMA) with HF and Lift Arc Ignition 2-step/4-step selection button. Welding current range TIG (DC): 5 A – 160 A Welding current range MMA: 10 A – 140 A Gas inflow time (post-gas) can be controlled. Current reduction (slope-down) can be adjusted. Connection for remote controller / foot pedal or up/down burner. Mains voltage: 230 V Areas of application & details: TIG Welding Machine Cebora Power TIG 1640 DC HF, Constant DC Source with INVERTER Technology, TIG/TIG Welding Machine, TIG Welding Machine, TIG DC Inverter, Shielded Gas Welding Machine, DC-TIG/MMA Welding Power Source, Electrode Manual Welding (MMA), Arc Welding Machine.

GTO Control 4000 A VDM7 Coutry o Orgin CH Order number 4501090751 Pictures to follow

GTO Control 4000 A VDM7 Order number 4501090751 A9BAD409291 Pictures to follow

Fine shredder Doppstadt AK 565 EcoPower used Model: AK 565 EcoPower Year of manufacture: 05 / 2021 Build No.: 1550 Operating hours: approx. 2,700 hours Availability: by arrangement Equipment: - Mobile shredder, mounted on a central axle trailer chassis for 80 km/h according to StvZo with ABS - Total weight approx. 19,000 kg - Mercedes/MTU diesel engine 6R1300, 390 KW at 2,000 rpm, meets EUROMOT IV emission standard - Fuel system 600 liters - Load-dependent control of the material feed via scraper floor - Aggressive feed roller: length 1,690 mm, diameter 510 mm, with attached toothed elements - Four-row flail drum with 36 free-swinging cast steel flail holders and interchangeable DoppLock flail tips - Centrally located lubrication strips - Electric pump for operating the cylinder functions (raise/lower support leg, open/close rear basket, fold/unfold rear belt, ...

Hydraulic injection moulding machine manufactured in 2004. This Engel Victory 750/180 Power features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It includes a screw diameter of 45 mm and a maximum injection pressure of 1,600 Bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 750/180 Power machine we have for sale. Contact us for further details regarding this machine.

Clean air extraction ALKO Power Unit 200P -used air filtration by means of filter bags, cleaning pneumatic, dust-tested, mobile collection container---------- Technical data ----------extraction nozzle: 200 mm, nominal volume flow: 2,261 m³/h, max. vacuum: 2,174 Pa, number of bags: 2 pieces, motor: 3 kW, compressed air connection: 6 bar, dimensions (LxWxH): 2,300 x 850 x 2,050 mm, weight: 470 kg

; Gross weight [kg]: 2250

; Gross weight [kg]: 35

General SKU418U1309 MakeGenser LocationBarneveld CEcheck TypePowervap-20-EX Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass General No.180100 Year of construction02-2017 Mounted on framecheck Mounted on wheelscheck With switchgearcheck ATEX designedcheck Extra SpecificationsPOWERVAP is a patented, fully automated pendulum system rotary evaporator with distinguished vacuum stability and distillation rate.- Automatic filling and draining of the rotating flask (patented)- Automatic emptying of the distillate vessel (patented)- Achievement of the desired product concentration- Precise regulation of the distillation process. Temperature, vacuum, and other process parameters are monitored in order to handle even foaming products reliably.- Computerized reflux and standby option- The rotating flask floats freely in the heating bath which enable ...

General SKU418U1308 MakeGenser LocationBarneveld CEcheck TypePowervap-20-EX Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass General No.170099 Year of construction02-2017 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace2,5x0,9 m Total height2 m Weight400 kg ATEX designedcheck Extra SpecificationsPOWERVAP is a patented, fully automated pendulum system rotary evaporator with distinguished vacuum stability and distillation rate of factor 5 compare to other rotary evaporators.- Automatic filling and draining of the rotating flask (patented)- Automatic emptying of the distillate vessel (patented)- Achievement of the desired product concentration- Precise regulation of the distillation process. Temperature, vacuum, and other process parameters are monitored in order to handle even foaming products reliably.- Compu ...

General SKU416X1283 LocationBarneveld CEcheck MakeGenser Scientific Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass General TypeVA—20T—EX No.050057 Mounted on framecheck Mounted on wheelscheck Floorspace1,2 x 0,9 m Total height2,4 m Weight480 kg Extra SpecificationsMax. working temperature: 80 °Ccomes with:20 l. evaporator bowlreciever vessels with filterglass condencer.leybold vacuumpump type: SV 40 960346, 1,5kW, 400V, (Ex)Tea, herbs & coffeeFine chemicalsBiotechnologySpicesFeed additivesSolventsDetergent & surf.Food additivesLubricants & oleoAnimal feedConfectioneryBeveragesDyes & pigmentsAPINew arrivalsRotary evaporatorsPaints & coatingsOils & fatGenser ScientificIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chemicalsIndustries > Chemical > BiotechnologyIndustries > Food & Feed > SpicesIndustries > ...

This 3-axis Finn-Power LPE5 SWUH punch-laser combination was manufactured in 2002. It features a Siemens Sinumerik 840D CNC, a ROFIN-SINAR laser with 2.5 kW power, and a servo-electric punching force of 20 tons. The work surface is 2500×1250 mm, and it includes 20 tool stations with a max tool diameter of 89 mm. Consider the opportunity to buy this Finn-Power LPE5 SWUH punch-laser combination. Contact us for more information about this machine.

This 5-axis SHW PowerSpeed 4000 CNC horizontal machining center was manufactured in 2022. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 750 mm. The machine includes a rotary table with a diameter of 1,400 mm and a maximum table load of 4,000 kg. If you are looking to get high-quality machining capabilities, consider the SHW PowerSpeed 4000 machine we have for sale. Contact us for further details.

Electric cart mover Power Attack MTC 30 CC - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Electric cart mover Power Attack MTC 30 CC Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Electric cart mover Power Attack MTC 30 CC Price: 9250 EUR Download PDF Electric cart mover Power Attack MTC 30 CC Device in very good condition. Ideal for transporting heavy goods, machines, boats, etc. After inspection, brand new batteries 2 pcs, new tires, charger, hook, fastening element with transport rollers included. Manufacturer’s description: Thanks to our compact electric towing tractors, you can e ...

Manufacturer: Finn-Power OY, Kauhava, Finland Model: F6 SV Year of manufacture: 2005 Machine weight: 13500 kg Operating hours: approximately 66,603 hours Note: housing is not included in the purchase Technical Data - Punching force: 30 t (300 kN) - Maximum workpiece size (L x W): 4061 x 1528 mm - Maximum workpiece thickness: 8 mm - Maximum workpiece weight: 200 kg - Rapid traverse X axis: 80 m/min - Rapid traverse Y axis: 60 m/min - Number of turret stations: 20 - Turret rotation speed: 30 rpm - Tool type: thick turret - Maximum tool diameter: 89 mm - Tool change time: 1 to 3 seconds - Maximum CNC rotating tool diameter: 89 mm - Maximum CNC rotating tool speed: 58 rpm - Maximum travel speed: 100 m/min - Drilling accuracy: 0.1 mm - Positioning accuracy: 0.08 mm - Power supply: 47 kVA - Average power consumption: 24 kW - Oil tank capacity: 330 l - Maximum operating pressure: 300 bar ...

Key data: 1270 mm, 610 mm, 720 mm

Inv. Num. : 9302 Type: MCV 1270 POWER Producer: MAS Created: 2002 Parameters: Control system: Heidenhain iTNC 530 Operating hours: 1000 h Tool magazine: 24 pieces Maximum vertical spindle speed: 10000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Cone: ISO 50 Machine height: 3300 mm Machine length: 5000 mm Machine width: 3600 mm Machine weight: 11000 kg Equipment: Technical documentation Workpiece probes Tool probe IKZ (15 bar) 10/2020: Machine completely cleaned and repaired Air hoses of the machine replaced Tool/workpiece cooling hoses replaced Piston rod of tool magazine sealed Air/oil clamping distributor sealed Piston seal of tool clamping sealed at the top of the spindle Automatic lubrication of the machine tested 8/2022: Main power module from SIEMENS completely repaired AC/DC converte ...

AC400V-2000kW Automatic Load Bank, , Rated Voltage: 3P4W 400VAC 50/60Hz, Power Supply: External 3P5W 400VAC 50 Hz, Rated Power: 2.000 kW, Duty Cycle: Continuous, Cooling type: Forced Air Cooling (Horizontal inlet air and upwards exhaust cooling) , , Load Steps @400V: 1, 2, 2, 5, 10, 10, 20, 50, 100, 200, 200, 200, 200, 200, 200, 200, 200, 200kW, total 2000kW, Note: when voltage is less than 400V, power will derate according to Ohm’s Law., , Wire Connection: , - Load bank input—busbar, - Control power input—terminal block, Communication Interface: RS232/RS485 - Control part IP54; Gross weight [kg]: 10000; Accessories: Remote controller: , Dimensions case: ± 492x395x216MM , weight case: ± 10 kg

A complete Weber slicing and packaging line is available. 1) Weber Type 904 slicer, cutting system: crescent blade, speed: 2000rpm, slice thickness range: 0.5mm-100mm. 2) CFS PowerPak 560 horizontal thermoforming packaging machine, year of manufacture: 2011, retrofit: 2013, film web width: 560mm, max. feed length: 650mm, max. forming depth: 130mm. 3) 2x CFS TL 150 cross-web labeling machines, year of manufacture: 2011, max. label width: 150mm, max. labeling capacity: 200/min. 4) Loma EMC in-line metal detector, year of manufacture: 2013. This is a complete slicing and packaging line with peripheral equipment. Documentation available. An on-site inspection is possible.

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is a high-performance sheet metal machining center that combines punching and laser cutting technologies. It enables comprehensive machining of workpieces with a maximum thickness of 8 mm, eliminating the need for additional operations on other machines. The use of both these technologies in a single system reduces task completion times and increases overall production efficiency. Punching is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch’s movement to be ...

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is designed for the comprehensive machining of sheet metal with a maximum thickness of 8 mm. It enables both punching and laser cutting in a single work cycle, reducing the need for additional operations on other machines. The combination of both these technologies in a single system speeds up task completion times and increases the efficiency of the production process. The punching process is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch movement to be pr ...

TECHNICAL DATA: Length of inlet planer: 1950 mm Working width: 240 mm Working height: 180 mm Spindle: Ø 40 mm Number of Spindles: 6 Drive via cardan shaft Grooved contact surface Speed: 8000 rpm Installed power: 41 kW Spindle configuration: 1: Bottom (5.5 kW) 2: Right (5.5 kW) 3: Left (5.5 kW) 4: Top (7.5 kW) 5: Top (5.5 kW) with PowerLock HSK 6: Bottom (5.5 kW) EQUIPMENT: Complete with milling cutters Complete with cabin

AC400V-200kW Automatic Load Bank , , Rated Voltage: 3P4W AC400V 50/60 Hz, Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz, Power Supply: 3P5W AC400V 50 Hz , Rated Power: 200 kW at 400V , Duty Cycle: Continuois , Cooling Type: Forced Air Cooling , (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.), , Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW, , Wire Connection: , - Load bank input— busbar (star coupling Y”), - Control power input—terminal block, Communication Interface: RS232/RS485; Gross weight [kg]: 400