industrial motor power used for sale

Cylindrical and fixed horizontal autoclave, used to sterilize food products. The equipment is totally made in stainless steel AISI-304. Manufacturer: VYC INDUSTRIAL, S.A. Type: AE-7800 Year: 2002 Maximum service pressure: 2 bars Design pressure: 2 bars Bell pressure: 2 bars Hydraulic test pressure: 3 bars Maximum service temperature: 110°C Design temperature: 150°C Elactic limit in design temperature: 140 n/mm2 Volume: 7,8 m3 Contained fluids: water/air 8 baskets in stainless steel and 6 trolleys are included. Cage dimensions: inside 980mmx1000mmx950mm. Outside 1070mm x 1060mm x 975mm. Recently overhauled and in perfect working order.

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

2930-12-334-9601 / 0010985920 2930-12-F23-2495 / 8690980160

Didar Part Number 0697210002 NSN 12-334-9607 Original Part Number 0020984020 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 17 Lt. Amount of Air Outside the Pipe 63 Lt.

Didar Part Number 2601582001 NSN 12-SG3-0291 Original Part Number X00018011/87 In-Pipe Water Pressure 3 – 8 bar Out of Pipe Air Pressure 3 – 5 bar In-Pipe Water Temperatur 75 °C Outside Pipe Air Temperature 235 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 22 Lt.

Didar Part Number 2605710003 NSN 12-A08-6397 Original Part Number 0030983220 In-Pipe Water Pressure 3.5 – 8.5 bar Out of Pipe Air Pressure 3.5 – 4 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 215 °C Amount of Water in the Pipe 24 Lt. Amount of Air Outside the Pipe 45 Lt.

Didar Part Number2600208001 NSN 2930-12-A01-6407 Original Part Number 0030983920 In-Pipe Water Pressure 6.0 – 9 bar Out of Pipe Air Pressure 3.3 – 5 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 225 °C Amount of Water in the Pipe 4 Lt. Amount of Air Outside the Pipe 14 Lt.

Didar Part Number 2605710001 NSN 12-A01-7491 Original Part Number 0010989720 - 0000985320 In-Pipe Water Pressure 4.5 – 8 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 25 Lt.

Didar Part Number 0697210001 NSN 12-334-8788 Original Part Number 0020984220 In-Pipe Water Pressure 3 – 4.5 bar Out of Pipe Air Pressure 4.5 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 10 Lt. Amount of Air Outside the Pipe 44 Lt.

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.

an older and used good cold rolling mill for the production of ribbed structural steel wire

1) Powder Mixing Plant Consisting Of: -n°2 Powder Dispensers+clochee For Dust Extraction; -n°1 Horizontal Mixer For Dosing Powders, Complete With Extraction Vents And Dust Filters; -n°2 Horizontal Mixer Accumulation Dust Materials Mixed, Complete With Extraction Vents And Dust Filters; - Support frame plus ladder. -almost new, used for a few hours. 2) Bl Packaging Machine For Plastic Bags 5/30 Kg: - Packaging Machine With Horizontal And Vertical Sealing Bars; - Complete With Electrical Panel And Support Frame. 3) Vertical Bucket Elevator: - Bevini brand; -mod. et4; - Measures 1.15m x 0.55m; - Height 6.70 m; - Almost new, used for a few hours.

NST#40 spindle with 5HP inverter motor. Spindle material is SCM415 full hardened through carbonizing heat treatment. Essential castings are made of high grade of Meehanite cast iron, which has been stressed, relieved to provide a rigid machine structure. Standard with 10” X 54” table with hardened and ground. Table T-slot is precise ground for precise tolerance. Precise ballscrews are equipped on X&Y axes. X Y slideways and gibs are coated with Turcite-B to provide smooth and wear resistant surface. XYZ slideways are hardened and ground for wear resistance and excellent longevity. 1:2 ratio timing belt pulleys on XY axes to increase drive torque. Table Size 1270 x 305mm T slots of table (number x width) 3 x 15.875mm Longitudinal travel 985mm Cross travel 450mm Vertical travel 450mm Quill travel 127mm Spindle nose to table surface 150~600/67~425mm Head swivel (R&L) 4 ...

B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features:

Description Heating platen Ce certificate

General SKU260U416 LocationBarneveld MakeMidland industrial TypeFS 100/102 No.SI 0055 09 Year of construction2009 Main Features MaterialStainless steel Motor1.1 KW Length420 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesDia: 160x420mm Screw sizesDia: 155x670mm InletDia: 250mm OutletDia: 120mm, 60mm Motor1,1kW, 230/400Volt, 920 rpm, (EX) Speed920rpm With sieve cagecheck Sieve perforationDia: 2mm MaterialStainless steel 1.4401 (316) Information Total height0,8m Weight160kg CEcheck Floor space1,1x0,4m ATEX compatiblecheckRotating sievesMidland industrialSieves > Rotating sievesBrand > Midland industrial What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

X-travel: 3700mm, y-travel: 2200mm, z-travel: 200mm, table dimensions: 4000x2300mm, connected load: 23kW, length: 5000mm, width: 3300mm, height: 2350mm, weight: 1,2t.

The box washer is designed for the semi-automatic washing of kistens and wooden containers, as standard. The use of a washer in the process reduces the consumption of water, detergents and energy. One box is washed at a time,

UK Power Generators is selling Waste Heat Recovery Unit. We are leading supplier of Industrial Equipment for Power Plants and accessories. Contact us today if you are interested in the above listed product. For more details and information; contact us at Infoukpowergeneratorsltd

Power Distributors VAT not deductible Please inquire with location and postcode

Electric motor, electric motor SIEMENS three-phase motor, power motor type 3LE16012BB233GB4 Type V1 Size 225M Motor speed 1475 rpm. Power consumption 84 Ampere Motor power 45 kW Mains connection 400 Volt, 50 Hz. Shaft diameter 60 mm Shaft spigot length 140 mm Wedge groove width in the shaft 18 mm Flange diameter 450 mm Centering diameter 350 mm Pitch circle 400 mm- Flange motor with 8 mounting holes 18 mm Overall length Motor housing without motor shaft 715 mm Overall length Motor housing with motor shaft 855 mm Space requirement L x W x H 855 x 450 x 570 mm Net weight: 320 kg very good condition - New, unused from stock dissolution; used

Electric motor, electric motor LAMMERS three-phase motor, power motor type 1TZ95012AA434AB4-Z Type B3 Size 200L Motor speed 2960 rpm. Power consumption 54 Ampere Motor power 30 kW Mains connection 400 Volt, 50 Hz. Shaft diameter 55 mm Shaft spigot length 110 mm Wedge groove width in the shaft 16 mm- foot motor with 4 mounting holes 19 mm, hole spacing 315 x 300 mm Overall length Motor housing without motor shaft 620 mm Overall length Motor housing with motor shaft 730 mm Space requirement L x W x H 730 x 400 x 520 mm Net weight: 205 kg very good condition - New, unused from stock dissolution; used

Power converter, power supply, power pack, switching power pack -Manufacturer: Siemens, SITOP Power 40 power supply -Type: 6EP1437-3BA00 -Input: 3AC 400-500V/max.2.6A 50/60Hz -Output: 24VDC/40A/960W -Dimensions: 130/240/H120 mm -Weight: 3.4 kg

Converter, power supply, power supply, switching power supply -Manufacturer: Siemens, SITOP Power 10 power supply -Type: 6EP1434-1SL01 -Input: 230/400 V 3 AC 50/60 Hz -Output: 24 V DC 10 A -Number: 6 pieces available -Price: per piece -Dimensions: 130/240/H125 mm -Weight: 3.3 kg/piece

Hydraulic power pack, hydraulic unit BOSCH REXROTH Order No: 983885 Year of construction 1982 Tank capacity: 150 litres Operating pressure: 60 bar nominal pressure / max. 100 bar Volume flow: 20 litres /min. Motor power pump: 3 kW Mains connection: 380 volts, 50 Hz. - 1 piece hydraulic pump BOSCH REXROTH, type 1PV2V3-40/25 RAO1MC63 - 2 pieces hydraulic valve BOSCH REXROTH with electro solenoid coil, type E6 E51/AG24NZ4- 2 pieces hydraulic valve BOSCH REXROTH with electro solenoid, type 4WE10D10OFLG24NZ4 - 1 piece pressure accumulator - various throttle valves, pressure regulators and pressure gauges - return line filter with indicator - hydraulic tank with maintenance cover Space requirement L x W x H: 950 x 750 x 1100 mm Weight: 400 kg good condition; used

Power supply PHOENIX CONTACT Quint Power ( Quintpower ) Quint PS-3AC/24DC/20 2866792 Input: 400 - 500V 3AC 50 - 60 Hz Output: 24 V DC 20 A used ! Dimensions: 130 x 70 x 130 mm

Power supply PHOENIX CONTACT Quint Power ( Quintpower ) Quint-PS/3AC/24DC/20 2866792 Input: 400 - 500V 3AC 50 - 60 Hz Output: 24 V DC 20 A New, with documents ! Dimensions ( Power Supply ): 130 x 70 x 135 mm Dimensions ( Packaging ): 185 x 180 x 115 mm

Power supply PHOENIX CONTACT Quint Power ( Quintpower ) Quint-PS/3x400-500AC/24DC/40 2938646 Input: 400 - 500V 3AC 3x 2.8 - 2.2 A 50 - 60 Hz Output: 24 V DC 40 A used, tested ! Dimensions: 240 x 130 x 130 mm

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Escherich high-voltage power supply Power Unit 55 FC -Type: PU55 FC-230V / ES023 -Voltage: 230V/50-60Hz -Quantity: 2x power supply available -Price: per piece -Dimension: 235/120/H140 mm -Weight: 2.9 kg/pc.

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact power supply Quint Power -Type: Quint-PS-3x400-500AC/24DC/10 -Order No.: 2938617 -Dimension: 130/85/H130 mm -Weight: 1.1 kg

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: ifm electronic, AS-i Power Supply -Type: AC 1216 -Number: 2x module available -Price per piece -Dimension: 105/50/H130 mm -Weight: 0.5 kg/pc.

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: MGV, power pack power supply -Type: PH1003-2840 -Input: 3 x 320...460V AC -Output: 27.3 VDC /40 A -Number: 2x power supply available -Price per piece -Dimension: 265/160/H125 mm -Weight: 2.5 kg/pc.

Power converter, power supply, power pack, switching power pack -Manufacturer: Siemens, SITOP Power 10 power supply -Type: 6EP1 334-1SL11 -Input: 120/230V 50/60Hz -Output: 24VDC 10A -Number: 1 piece available -Price per piece -Dimensions: 110/100/H30 mm -Weight: 1,3kg/pcs

Power converter, power supply, power pack, switching power pack -Manufacturer: Siemens, SITOP Power power supply -Type: 6EP1 331-2BA10 -Input: 120/230V 50/60Hz -Output: 24VDC 0.5A -Number: 1 piece available -Price per piece -Dimensions: 110/100/H30 mm -Weight: 0.1kg/pcs

Converter, power supply, power supply, switching power supply -Manufacturer: Siemens power supply unit -Type: 3RX9307-1AAOO -Input: 102-132 V AC/195-253 V AC -Output: 30 V DC/4 A -Price: per piece -Number: 5 pieces -Dimensions: 110/75/H135 mm -Weight: 1.2 kg/piece

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact, power supply -Type: CM 90-HP-230AC/24DC/2 -Item no.: 29 43 70 9 -Dimension: 145/90/H80 mm -Weight: 2.3 kg

Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Series No. 0239398K Year of manufacture: 1993 Nominal power: 6 kW Operating voltage: 400 DC Nominal current: 18 amps Maximum speed: 1000 rpm. Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm key)Shaft length: approx. 76 mm (shaft protrusion from centering edge) Centering flange diameter: 230 mm Bolt circle diameter: 264 mm, 4x 14 mm holes Longlife-speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length : 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Weight: 130 kg good condition; used

Technical information: Power supply , V: 400V /50hZ Motor power, kW: 45 Air delivery at 8bar, L/min at 8bar: 7000 Air delivery at 10bar, L/min at 10bar: 6200 Drive type / Starting System Direct-Driven / Y Lube oil (L) 30 Outlet Diameter, inch: DN40 Noise level, dB: 72+2 Dimensions, (length x width x height), mm: 1500x1000x1330 Gross Weight , kg: 850 -Price is with VAT 0%. -For shipping costs contact us directly.

Power contactor with motor protection relay MOELLER DIL EM-10-G ( DILEM10G ) 4 KW 400 V Control voltage: 24 V DC motor protection relay: ZE - 1.6 1,0 - 1,6 A used, tested ! Dimensions: 115 x 45 x 55 mm

Power contactor with motor protection relay MOELLER DIL EM-10-G ( DILEM10G ) 4 KW 400 V Control voltage: 24 V DC motor protection relay: ZE - 2.4 1,6 - 2,4 A used, tested ! Dimensions: 115 x 45 x 55 mm

Chip motor for wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -with Berg Spanntechnik chip motor type: ESP-120-UF -clamping force: max. Dan -Transport dimensions: 165/165/H440 mm -Weight: 19 kg

Controls:KUKA VKRC2 edit 2005 WORKING RANGE -ROBOT-:. - capacity:500 kg - Reach:2825 mm Technical description : 6-axis Industrial Robot with payload of 500 kgs including electrical cabinet operating panel and cable

Controls:KUKA VKRC2 edit 2005 WORKING RANGE -ROBOT-:. - capacity:500 kg - Reach:2825 mm Technical description : 6-axis Industrial Robot with payload of 500 kgs including electrical cabinet operating panel and cable

Technical description : - RAPID ACTION DOOR - Height = 2000mm - Width = 1800mm

Technical description : - RAPID ACTION DOOR - Height = 2000mm - Width = 2000mm