We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,244 used machines on RESALE, but how to find them? Machine Search
used
Connected load: 84kVA, length: 5065mm, width: 1100mm, height: 1530mm.
used
Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes.
used
Electric motor, three-phase motor -Power: 1.1 kW -Speed: 920 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 315/200/H205 mm -Weight: 15.5 kg
used
current capacity: 1162 kVA work piece width: 80 mm workpiece length: 6000 mm total power requirement: 1000 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,5 x 5 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Water-cooled high-frequency induction continuous furnace for inductive local heating, activation of getters, hardening & starting and much more
used
The machine was overhauled by the manufacturer in 2022, the coating inside the coil was renewed, the oven was then no longer used, the oven no longer complies with the EMC guidelines, without control, an on-site inspection is possible.
used
Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With suction device and table The upward-opening door keeps the hot surface away from the user Gently self-closing door (for 5, 13, 21 & 23 litre models) Standard start-up delay and process timer function Durable alumina backing plates for the heating elements; Robust door frame and base plate High-quality fiber insulation with low thermal mass Powerful heating elements on both sides ensure very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing More items new and used - you can find them in our shop! International shipping costs on request!
new
Furnace 1200 working temperature 100 - 1200 Celsius size 1x1x2m auto door auto bogie Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen Poreba Gurutzpe Tacchi Gem ...
used
Used storage heater Manufacturer Seipp Type UAGG 390- heats workpieces and ball bearings up to XXX kg With various yokes in different sizes Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturer, mechanical engineering, transport sector Voltage / Frequency / Power: 380 V / 50Hz / 35A Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearing max. xxx kg (other workpieces xx kg) Inner diameter 15/120 mm Outer diametermax. xxx mm Width max. xxx mm Automatic temperature: Magnetic sensor, control range 60 °C to max. 160 °C Aperture priority: Bays: Edge length 80mm, 70mm, 60mm, 40mm, 30mm, 20mm, 15mm - Induction heater - induction heater Special price
new
Semi-automatic induction sealer for aluminium foils in closures - Closure sizes 15-60mm - Closure sizes 50-120mm
used
frequency: 230 Hz workpiece length: 150 mm work piece width: 150 mm temperature max.: ° muffle size (length): muffle size (width): muffle size (depth): mm total power requirement: 210 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
NEW Wok Saro COLDFIRE CW-50A Induction wok induction frying pan. Demonstration device List price 4358€ Ideal for cooking, keeping warm, buffets and so on Combines the advantages of gas and electricity Housing made of stainless steel Optionally adjustable heat levels 1-19 Ease of use Overheating protection Weight 16 kilos gross Dimensions 385 X 520 X 243 mm Connection 400 V / three phases / 5 KW Pan Suitable for induction and gas Diameter 36 cm 5 layers of material for excellent heat transfer Stainless Steel Magnesium/Alu Cast aluminium/aluminium stainless steel magnesium Handle and handle made of stainless steel Weight 3 kilos gross Article code 301-2000 180€ More items - new and used - can be found in our shop! International shipping costs on request!
Recon Part Number: 1231 4275 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
used
weight of the machine ca.:5 t
used
System includes (1) 2x Ambrell Easyheat induction heaters (2) conveyor belt (3) Kelvin cooling system, weight: 235 kg.
used
INDUCTION DEVICE FOR HEATING FOR ROLLING BEARINGS AND BALL BEARINGS TYPE TN TERMO38EA 400V-13KVA THE DEVICE IS USED, THE MAGNETIC TEMPERATURE SENSOR IS NEW AND MUST BE INSTALLED
used
Bartscher Induction Plate 3.5 kw tested
used
Neumärker Induction Plate 3.5 kw tested-Buttons Signs of use
used
AEG 4 pits induction plate, dimensions: 910 mm x 650 mm x 860 mm.
used
technical data on request !
used
Induction hob BOSCH PXV890DV5E, original packaging opened, has been ordered for exhibition
used
Induction hob SAMSUNG NZ64B47016FK, 7.400 W, original packaging opened, has been ordered for exhibition
used
Induction hob CASO CI6 FB 7227, 7.4 kW, original packaging
used
Induction hob CASO CI6 FB 7227, 7.4 kW, original packaging
used
Induction hob CASO CI6 FB 7227, 7.4 kW, original packaging
used
Induction hob CASO CI6 FB 7227, 7.4 kW, original packaging
used
frequency:5.000-150.000 Hz weight of the machine ca.:10 t Z-axis:45-50 mm X-axis:pneumatisch working lenght:45-50 mm with induction generator Sinak 100PH CN: 26811/100014 built in 2006 with belt filter press Heat exchanger and hydraulic unit
used
weight of the machine ca.:11 t dimensions of the machine ca.:3x4x4,4 m clamping length max.:1000 mm Automatic Induction-Camshaft Hardening Machine. Last production on this machine Camshaft with lenght 4438,8 mm. Power / Frequency 3 x 140/56 kW / 10/200 kHz Distance between two tcenters is about 1300mm. But induction axis moves 900mm.
used
Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m
used
Furnace / annealing furnace Degussa Wolfgang near Hanau Oven no.: 20881 Type: KO 80/50/120 Year of construction 1967 1000 °Cels Volt 380 Hz 50 AMP 82 kW 54
MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,
AIR TEMP.: 600 °C, 2 CHAMBERS, SLAB DIM.: 1.54 x 3.0 x 0.35 M - W x L x T
used
Glass Heating Equipment Furnace GT1411 Equipment application. This special equipment is used for heating homogenously the flat glass and cooling it thereafter, is involved in the glass deep processing machinery. The suitable working glass is clear float glass. Power supply requirement and total weight of equipment. This kind of equipment requires a 3-phase-5-line AC power supply of 380V and total installed power of it is about 250kW. Total weight is about 10 tons. Constitution of Glass Heating Equipment. Computer, control cabinet, power regulation cabinet, loading table, heating section, coating section, annealing section, unloading table. The Furnace was in good operational condition when it was dismantled in 2016. The unit is located in a warehouse in Finland
new
Electrically heated box furnace, make VEI-Engineering type: LU temperature: max. 650°C heating power: 45 kW fan: 3,0 kW total connected load: approx. 52 kVA internal dimensions (l x w x h): 1.000 x 700 x 700 mm charge weight: max. 1,0 t
new
Pit furnace, make VEI type: VEI_SCO_EB clear height: 1200mm clear diameter: 1400 mm outer diameter: 2200 mm outer height (lidless): 1650mm outer height (with lid): 2600mm electrically heated: 64,5 kW fan: 5,5 kW connection: 400 V, 50 Hz temperature: max. 750°C
used
Inv. Num. : 6789 Type: Furnace Producer: SOLO Generated: Parameters: Maximum temperature: 1150 C
Ladies and gentlemen, Below you will submit a non-binding offer for a used 3.7 tonne arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 3.7 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of ...
Ladies and gentlemen, Below you will submit a non-binding offer for a used 50 tons arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 50 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the ...
Ladies and gentlemen, Below you will submit a non-binding offer for a used 50 tons arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 50 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the ...
1. 1971, BELL TYPE, TEMP.: 500 °C, COIL DIM.: OD 1400 MM x 1600 MM 2. VEB, 1971, INNER CHAMBER DIM.: 2.5 x 1.3 x 1.5 M, TEMP.: 500 °C
new
Gas furnace, make VEI type: KA_GB_TO external dimensions (w x h x d): 3000 x 3700 x 2300 mm interior dimensions (w x h x d): 1500 x 2200 x 1500 mm temperature: 300 ° C loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW heating power: 120 kW
new
Electrically heated chamber furnace, make VEI type: KA_EB_TO external dimensions (w x h X d): 2500 x 2900 x 1700 mm usable dimensions (w x h X d): 1250 x 2000 x 1250 mm temperature: 250 ° C heating power: 24 kW
new
Gas-fired continuous furnace, make VEI type: DLO_GB heated length: 4000 mm conveyor belt width: 900 mm emperature: max. 950 ° C
new
Gas heated tempering furnace, make VEI type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW loading weight: 3.000 kg gross
new
Crucible melting furnace, make VEI type: SO_EB_BU Temperature: 300°C - 1250°C
used
18 kW, 1150 C. - see picture
used
new
Shaft furnace,make VEI type: SCO_EB height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C
new
external dimensions (w x h x d):1500 x 1600 x 2500 mm useable dimensions (w x h x d):750 x 600 x 1100 mm temperature: 1200°C electrical heated: ca. 42 kW charge weight: 700 kg
Qty. 1 Second-hand gas heated log furnace including hot shear Mfc.: ELHAUS Type: L250-90/135/4FK – WS250BD Built: 1999 Log dia.: 10” – 254 mm Log length: 5 – 7 m Billet length: 650 – 1300 mm Min. shear temperature: depending on the alloy approx. 340 – 400 °C Log temperature max.: 530 °C Heated by natural gas Hu=8.600 kcal/Nm³ Gas consumption: 234 kWh/tAl – 23.5 Nm³/t Al El. power: 130 kW Number of heating zones: 4 Number of circulating zones: 3 Dimensions of the furnace: 14.75 x 2.2 x 3.9 m - L x W x H Hot shear Recoil pressure: 0 – 100 bar Recoil stroke: 1.85 m Shear force: max. 1.69 MN at 210 bar Shear stroke: 360 mm Output pressure: max. 160 bar Output stroke: 325 mm Closing pressure: 210 bar Spreading stroke: 2 x 4.0 mm Dim.: Height above hallway: 2.9 m Length over everything: 3.95 m Width over everything: 2.65 m Hydraulic station Max. ...