Manufacturer:
(Category: 102-91)
10.000 € add to watchlist
consisting of: CNC lathe EMAG VL3 DSL, BJ. 2012, Ser. No. 103899 and CNC lathe EMAG VLY , BJ. 2012, Ser. No. 10390, each CNC control SIEMENS SINUMERIK, robot loading system with loading robot FANUC M10iA, BJ. 2012, each machine with WW ME-FI 600 filter system, Sermeto HENNIG 30 S chip extraction, EMAG cooling unit, coolant device, workpiece conveyor system and hand control panel
x-travel: 750 mmy-travel: 210 mmz-travel: 1150 + 100 mmcontrol: Fanuc MSX-701III Maximum turning diameter: 660 mmMax. turning length: 1498 mmDiameter over cross slide max.: 400 mmnumber of spindle speeds: 3000 U/mintool piece magazine with: 40 Plätzenturret: 10 Fachtotal power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
4.999 € add to watchlist
CNC control MORI SEIKI MSX-501, 2 turrets with 16 tool positions each, driven tools, 2 spindles, bar passage 52 mm, max. speed 6000 rpm, max. turning diameter 190 mm, max. turning length 450 mm, Y-axis +/- 40 mm, machine weight 5,100 kg, chip conveyor
CONTROLS CNC controls FANUC BASIC FUNCTIONS number of spindles: 2 number of turrets: 2 live positions: yes number of c-axes: 2 number of y-axes: 1 number of b-axes: 1 WORKING RANGE TURNING bar diameter (max): 50 mmMAIN SPINDLE spindle revolutions (max): 5000 /min drive power: 11 kW spindle bore diameter: 50 mm c-axis: yes COUNTER SPINDLE spindle revolutions (max): 5000 /min drive power: 7.5 kW c-axis: yes Z-axis travel: 465 mmX/Z SLIDE tool fixture: Turret number of tool positions (total): 24 number of live positions: 24 - rotation speeds (max): 6000 /minELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4500 mm space requirements -front/back-: 2200 mm total height: 1900 mm total weight approx.: 5500 kgATTACHMENTS (TURNING) ...
SPINNER TC110L-MCY Powerful, used CNC turning-milling center with C-/Y-axis for complex machining with driven tools. Year of manufacture 2007 Control SIEMENS 840DE sl ShopTurn X – 350 mm Y – 230mm -115+115mm Z – 1,840 mm C-axis Swing diameter up to 690 mm Spindle 26 kW with 2 gears Speeds up to 3,200 rpm. Spindle bore 110 mm Equipment: Revolver BARUFFALDI type TBMR250-12 with 12 seats, Refurbished in 2024 Driven tools up to 4,000 rpm. VDI 50 Mounts hydraulic bezel make SMW Hydraulic three-jaw chuck make SMW diameter 315 mm Oil Mist Extraction System Make IFS Model M1600 Year 2012 Hinged belt chip conveyor make KNOLL Model S -1/50 Paper belt filter system make KNOLL model KF150/700 Coolant High Pressure Pump electronic handwheel Footswitch Included in delivery: Operating Instructions/Documentation More photos and PDF with technical data & transport ...
turning diameter: 376 mmturning length: 760 mmcontrol: FANUC I-Series Plus greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 4000 U/minspindle drive motor: 22 / 15 kWspindle nose: ASA A2-8 spindle bore: 81 mmbar material dia.: 76 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 12 St.travel -x axis: 260 (72 + 188 ) mmtravel -z axis: 830 mmtravel -y axis: 105 (+/- 52,5) mmdiameter of quill: 100 mmquill stroke: 100 mmtailstock taper MT: MT 5 total power requirement: 41,98 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 4,0 x 2,5 x 2,2 mCNC control FFANUC I-Series Plus- chip conveyor- driventools 5000U/min, 7,5kW- C-axis- hydraulic unit- tailstock- coolant 7 bar- bar loader interfaceCapto C3 straight chair: 2Capto C3 90° chair: 1ER20 Capto chuck: 10ER32 Capto chuck: 4Weldon-to-Capt ...
DMG MORI CL2000A CNC turning center was built in 2017 in Japan by DMG MORI CO., LTD. The machine is new and has never been used. The DMG MORI CL2000A is an excellent choice for the production of high-precision and repeatable parts used in many industrial sectors. This compact yet extremely powerful lathe will excel in even the most demanding production challenges. All machining processes, i.e. precision turning or threading, are performed fully automatically by means of the spindle and the cutting tools, taken from a 10-position turret. The spindle, driven by a high-powered motor, rotates at a maximum speed of 4500 rpm and operates in two X,Z axes with feeds of 245 mm and 370 mm respectively. What’s more, the machine’s design is based on the Finite Element Method (FEM). This solution guarantees the maintenance of high geometrical accuracy of the design, even under heavy loads. ...
turning diameter: 420 mmturning length: 650 mmcontrol: Okuma OSP-U100L spindle bore: 95 mmspindle turning speed range: 2800 U/mintravel -x axis: 300 mmtravel -z axis: 675 mmmain drive motor: 22/30 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 2700 x 1900 x 1885 mmFirst put into operation 2001.- 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW- Internal extraction system by Hengst Filtration (year of manufacture 2023)- Touchsetter, tool measurement- C-axis (main spindle)- Tool breakage and wear monitoring- 3-jaw chuck, Kitagawa B210, Ø250- Tailstock- Coolant supply, also through the tool- IGF dialog programming- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control MITSUBISHI M 700 Bar Passage 37.5 mm 2 x 12-speed revolver with attached revolver Wkz. 2 x C-axis 2 x Y-axis Main/sub-spindle FMB Bar Loading Magazine turbo 3-36 Knoll Coolant Preparation KF 10 Chip conveyor Renishaw Probes Parts catcher Conveyor belt for precast elements Air filter 2 x Collet Chuck Tool holders and collets
BASIC FUNCTIONS number of spindles: 1 number of turrets: 1 live positions: yes WORKING RANGE TURNING swing diameter (max): 560 mm turning diameter (max): 275 mm bar diameter (max): 42 mm worpiece length max.: 450 mmMAIN SPINDLE spindle revolutions (min): 5600 /min drive power: 11 kWX/Z SLIDE number of tool positions (total): 11 number of live positions: 11 - rotation speeds (max): 4500 /minTAILSTOCK sleeve stroke: 60 mm sleeve diameter: 70 mm holding force (max.): 8600 kNELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2700 mm space requirements -front/back-: 1600 mm total height: 1800 mm total weight approx.: 3500 kgATTACHMENTS (TURNING) chip conveyor: yes European CE standards: yes
OKUMA LB 300 M CNC turning center was built in 2006 in Japan by OKUMA Corporation. The machine, designed for even the most demanding production challenges, is an excellent choice for both unit and series production. Its extensive machining capabilities enable a wide range of complex operations, such as turning or threading, to be realised with the highest accuracy and repeatability. The workspace of the OKUMA LB 300 M machine has been fully maximised in relation to its compact dimensions in order to ensure complete freedom of operation. It features, among others, an inclined bed, a reliable spindle and a 12-position turret. The spindle, driven by a high-powered motor, reaches a maximum speed of 4500 rpm and moves in two X,Z axes with feeds of 260 mm and 520 mm respectively. All cutting tools are stored in a 12-position turret, which offers fast and reliable operation. Precise position ...
CONTROLS CNC controls FANUC 160 I BASIC FUNCTIONS number of spindles: 2 number of c-axes: 2 WORKING RANGE TURNING turning diameter (max): 42 mm bar diameter (max): 42 mmMAIN SPINDLE spindle revolutions (max): 6500 /minCOUNTER SPINDLE spindle revolutions (max): 6500 /minX/Z SLIDE X-axis travel: 65 mm Y-axis travel: 350 mm rapid traverse Z: 30000 mm/min rapid traverse X: 30000 mm/min rapid traverse Y: 30000 mm/minX/Z SLIDE Z-axis travel: 320 mm X-axis travel: 265 mm Y-axis travel: 326 mm rapid traverse Y: 30000 mm/minELECTRICAL SPECIFICATIONS mains power supply: 54 kVA mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4900 mm space requirements -front/back-: 1630 mm total height: 1920 mm total weight approx.: 4400 kgATTACHMENTS (TURNING) bar magazine: yes chip conve ...
HAAS ST-30 CNC lathe was built in 2018 in the United States by HAAS AUTOMATION, INC. The machine on offer is an excellent choice for both unit and series production. It is capable of performing a number of complex operations, i.e. precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, reaches a maximum speed of 3400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. Tools taken from the 12-position turret are continuously measured and calibrated to guarantee maximum machining precision. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 is distinguished by its compact design, engineered with extreme rigidity and ...
CONTROLS CNC controls FANUC 31I MODEL A BASIC FUNCTIONS number of spindles: 2 number of turrets: 3 live positions: yes number of c-axes: 3 number of y-axes: 3 WORKING RANGE TURNING turning diameter (max): 170 mm bar diameter (max): 45 mm worpiece length max.: 588 mmMAIN SPINDLE spindle revolutions (max): 6000 /min spindle bore diameter: 42 mm spindle positioning: 0.001 ° c-axis: yes COUNTER SPINDLE spindle revolutions (max): 6000 /min spindle positioning: 0.001 ° c-axis: yes ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 3400 mm space requirements -front/back-: 2000 mm total height: 1900 mm total weight approx.: 8000 kg
HAAS ST-30 CNC turning center was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its high reliability and precision, is perfect for both unit and series production. It is capable of performing a number of complex operations, such as precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, rotates at a maximum speed of 2400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. To guarantee maximum machining precision, each tool taken from the 12-position turret is continuously measured and calibrated by a measuring probe. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 feat ...
CONTROLS CNC controls MAZATROL SMOOTH X BASIC FUNCTIONS number of spindles: 2 number of turrets: 1 WORKING RANGE TURNING turning diameter (max): 658 mm bar diameter (max): 80 mm worpiece length max.: 1519 mmMAIN SPINDLE spindle revolutions (max): 4000 /min drive power: 30 kW c-axis: yes COUNTER SPINDLE spindle revolutions (max): 4000 /min drive power: 26 kW c-axis: yes X/Z SLIDE Z-axis travel: 1585 mm X-axis travel: 615 mm Y-axis travel: 250 mm rotating range B-axis up to: 210 ° rapid traverse Z: 50000 mm/min rapid traverse X: 50000 mm/min rapid traverse Y: 40000 mm/minX/Z SLIDE rotating range B-axis up to: 0.0001 ° - rotation speeds (max): 12000 /min - drive power: 24 kWTOOL MAGAZINE number of positions: 72 tool diameter max.: 90 mm - with free neighbour positions: 125 mm tool length max.: 400 mm too ...
To mediate on behalf of the customer. Used machine Machine Type: CNC Double Turning Center Model: EMCO TURN 420MCplus Manufacturer: EMCO Control: Siemens 840D First commissioning: 2005 #009338 Location: Poland Control Siemens 840D Turning length 120 mm Turning diameter100 mm Number of axes 2x3 Spindle speed 5000 rpm The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
CONTROLS CNC controls MITSUBISHI M720BM BASIC FUNCTIONS number of spindles: 2 number of turrets: 1 live positions: yes number of c-axes: 2 WORKING RANGE TURNING swing diameter (max): 700 mm turning diameter (max): 350 mmMAIN SPINDLE spindle revolutions (max): 4000 /min spindle bore diameter: 90 mm c-axis: yes X/Z SLIDE - rotation speeds (max): 6000 /minTOOL MAGAZINE number of positions: 24 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 7500 kgATTACHMENTS (TURNING) chip conveyor: yes coolant unit: yes hydraulic system: yes European CE standards: yes Machine in a good conditionThe spindle guides need to be replaced.Machine equipment (1500.- CHF (below)):- 1x double face and longitudinal turning tool holder- 3x face and longitudinal turning tool holders- 1x bor ...
To mediate on behalf of the customer. Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32 Manufacturer: Gildemeister Control: Fanuc 160iB First commissioning: 2003 #009328 Location: Poland Control Fanuc 160i-B Turning length 120 mm Turning diameter 32 mm Number of axes 8 Travel X1 axis 65 mm Travel Y1 axis 350 mm Travel Z1 axis 120 mm Travel X2 axis 265 mm Travel Y2 axis 235 mm Travel Z2 axis 320 mm C1-axis travel 360° Travel C2 axis 360° Spindle bore 42 mm Spindle speed 8000 rpm Motor power 7.5 kW Total power requirement 34 kVA Dimensions L 4900 x W 1630 x H 1920 mm Weight 4350 kg The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
greates pass round over bed: 670 mmswing diameter over bed slide: 490 mmmax. turning diameter: 490 mmcontrol: SIEMENS - 840 D main spindle bore: 115 mmexternal spindle dia. in forward position: 160 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,- 3 jaw chuck,A machine video from the production plant will be shared on request.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC turning and milling center Okuma Multus B300II-W Control: OSP-P 300SA Year of Make: 2022 Internal machine no. 55 X-axis: 580 mm Y-axis with stroke: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40-fold Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. pump 20 bar - Preparation for in-process measurement - Tool height correction in Y-axis for turning tools - Hi-Cut Pro high-speed control
turning diameter: 340 mmturning length: 575 mmswing dia.: 500 mmX-Axis movement: 215 mmY-Axis movement: 100 mmZ-Axis movement: 605 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 4500 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 5000 1/minspindle motor: 15/11 kWspindle bore diameter: 76 mmbar capacity: 65 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 7,5 kWspindle bore: 53 mmspindle distance: 575 mmtotal power requirement: 26,9 kVAWeight: 4,8 tdimensions of the machine ca.: 2,7 x 1,7 x 1,75 m- Mazatrol SmoothG CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis-- Turning Speed: 4500 U/min, 5,5kW- 3-jaw chuck-- Main: 8-- Counter: 6- Chip conveyor- Coolant system- ...
Key data: 650 mm, 1500 mm
Double Spindle 5-Axis/7-Axis CNC Double Spindle Turning and Milling Center Okuma Multus U3000 1SW 1500 Year of construction 2021 OSP P300SA IGF-D CNC Controller Circumferential diameter over carriage 650 mm Turning diameter max. 1,500 mm Main spindle: Spindle bore 91 mm Spindle drive power 15/22 kW Spindle speeds max. 4,200 rpm. Chuck diameter 250 mm C-axis 0.0001° Sub-spindle: Spindle bore 91 mm Spindle drive power 15/22 kW Spindle speeds max. 4,200 rpm. Chuck diameter 250 mm C-axis 0.0001° Tool support: Single tool carrier in the work area Tools for turning (L) and milling (M) CAPTO C6 Tool Holder Milling spindle drive power 19/25 kW Milling spindle speeds 50 – 12,000 rpm. Tool magazine and automatic tool changer 80 tool magazine positions Axes/travels: Flat path X 645 mm Perpendicular travel (off-center) 250 mm Longitudinal travel Z 1,600 m ...
turning diameter: 760 mmturning length: 1540 mmcontrol: Fanuc 31i-B dimensions of machine: 5500 x 2700 x 3110 mmchip conveyor: 6900 x 2400 mmtotal power requirement: 94,42 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: mTurning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle.Condition: Very well preserved, machine comes from a company liquidation.Time recording:Control unit on: 13127 hoursRuntime: 3833 hoursProcessing time: 2835 hoursThe upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning.Fanuc 31i-B CNC controlSwing diameter over bed: 1000 mmMaximum turning diameter: 760 mmMaximum turning length: 1540 mmMaximum bar diameter (manual/continuous): 76/76 mmY-axis travel: 230 mm (±115 mm)Clamp (counter s ...
CNC milling and turning center Machine type: DMG Mori CLX 450 TC with Robo2go Control: Siemens 840 D sl Operate Slimline Year of manufacture: 2023 TECHNICAL DATA: Max. turning length: [mm] 1,100 Turning diameter: [mm] 400 Main spindle ISM 65 Speed range: [1/min.] 5,000 Drive power: [kW] 14 / 17 Torque: [Nm] 275 / 345 Spindle Nose: A2-8 Bar Passage: [mm] 67 C-axis CNC spindle swivel for milling and milling Filming Max. speed: [1/min.] 12,000 Drive power: [kW] 8.8 / 10.5 Torque: [Nm] 73 / 90 Tool holder: HSK 63 Tool positions: 30 Sub-spindle ISM 65 Spindle Nose: A2-8 Max. speed: [1/min.] 5,000 Drive power: [kW] 14 / 17 Torque: [Nm] 275 / 345 C-axis X-axis: [mm] 750 EUR 395,000 Y-axis: [+/- mm] 100 Z-axis: [mm] 1,100 B-axis +/- 120 mm Features: Chip conveyor Direct Path Measurement System Chip rinsing gun 3-jaw chuck [mm] SMW-Autoblok BBD 250/78 3-ja ...
turning diameter: 100 mmturning length: 320 / 345 mmcontrol: Siemens 840 D swing diameter: 145 mmspindle distance: 580 mmslide I:: slide I - cross travel: (X1) 220 mmslide I - longitudial travel: (Z1) 320 mmy-axis: +/- 30 mmrapid traverse: (X/Y/Z) 30/15/30 m/minslide II:: slide II - cross travel: (X2) 120 mmslide II - longitudial travel: (Z2) 345 mmrapid traverse: (X/Z) 30 m/minSubspindle:: Travel subspindle: (Z3) 380 mmvertical stroke: (X3) 145 mmbar material dia.: max. 36 mmrapid traverse: (X/Z) 20/30 m/minpower capacity: (40/100 % ED) 26/21 kWspindle turning speed range: 40 - 7200 U/mintotal power requirement: 42 kVAweight of the machine ca.: 5,3 tdimensions of the machine ca.: mCNC turning and milling centre with Y-axis, 2 turrets, subspindle andbar feeder.A total of over 44,000 EUR has been invested in necessaryrepairs and maintenance over the last 5 years by DMG MORI (replaceme ...
CNC Lathe Manufacturer: Gildemeister Type twin 42 Year of manufacture 2005 Control Siemens 840D Turning length 210mm 2 X 12-fold turret all places are powered Engine A 83700 Spindle A 50809 Machine has a defect in the pick-up spindle, probably bearing With Breuning Profimat bar loading magazine
turning diameter: 250 mmturning length: 600 mmcontrol: FANUC Series 31i-Model A total power requirement: 23 kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: 2.880 x 2.130 x 1.990 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC turning and milling center MacTurn 30 Control: OSP-U100L Year of Make: 2001 Internal machine no. 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Circumferential diameter over bed: 500mm Circumferential diameter over face slide: 500 mm Tool holder: SK 40 Tool positions: 60 places Travels: X-axis: 430 mm Y-axis: 190(+/-95) mm Z-axis:1,090 mm C-axis: 0.001° - Three-jaw chuck SMW Autoblok - Tailstock programmable - Chip conveyors - Paper belt filter system with high-pressure pump - Oil mist extraction - Touchsetter - One Touch IGF - Door Automatic - Large baking package - Large tool package
turning diameter: 820 mmturning length: 6000 mmcontrol: Siemens Si 840 D sl total power requirement: 155 kWweight of the machine ca.: 65 tdimensions of the machine ca.: 16350 x 3700 x 3850 mPurchase price EUR 1.550.000Time recording from Feb. 2025Operating hours = 38601 hMain spindle = 1958 hMilling spindle = 1760 hCNC control Si 840D slWorking area 6000 mmWorking height 1390 mmSwing diameter over bed slide/bed 820 mmX-axis travel +850 -25 mmZ-axis travel 6820 mmC-axis, smallest increment +/-0.001°Workpiece spindleSpindle head according to DIN 55026 A15Bathing through 160 mmFront diameter Bearing 240mm2-stage gearbox, infinitely variable programmableDrive power at 100/60% duty cycle: 78/87kWSpeed ranges: 2Speed range I: 10-501 rpmSpeed range II: 10-1750 rpmTorque I, 60% duty cycle: 8000 NmTorque II, 60% duty cycle: 2308 NmC-axisHolding torque with backlash-free spindle brake: 3000 NmSpe ...
The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...
turning diameter: 42 / 140 mmturning length: 170 mmcontrol: Mitsubishi Meldas turning speeds: 80-8.000 U/minc-axis: 0,001° turret (x-stations): 2x 12 (VDI 20) angetriebenturning speeds: 45-4.500 U/mingripping station: 42 mmspindle: 1 kWturning speeds: 60-6.000 U/minc-axis: 0,001° number of controlled axis: 8 collet unit: 48 DIN 6343 .Number of working hours: 10769 hchip conveyor: ja/yes Bj. 2018total power requirement: 7,5 / 11 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2,4 x 1,6 x 2,2 mCNC turning and milling machine CITIZEN BOLEY BE 42, year 2007Simultaneous working with 7 axes on main and pick-up spindlevery good condition, operating hours 21.999h (September 2024)Accessories:# Various tool holders:5x axiale driven tool holder# collet chuck for collets type 173E# additional coolant cooler# Knoll chip conveyor, year of construction 2018The Boley BE 42 is without ...
Used machine CNC lathe Machine type: DMG Gildemeister NEF 600 Control: Heidenhain IT Turn Plus Year of Make: 2006 TECHNICAL DATA: Max. turning length: [mm] 1,250 Max. Rotary Ø over bed: [mm] 600 Max. rotary Ø over slide: [mm] 410 Spindle bore: [mm] 90 Number of controlled axes: 2 Speed range: [1/min.] 3,000 Drive power: [kW] 36.5 / 27.5 Torque: [Nm] 785 Tailstock MK 5 Quill 80mm Number of turrets: 1 Travel X-axis ob. Rev. / unt. Rev.: VDI 40/8 Tool positions: 8 Machine weight: [kg] 5,500 Space requirement (LxWxH): [m] 5.0 x 2.0 x 2.2 m Features: Chip conveyor 3-jaw chuck [mm] 315 This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
turning diameter: 376 mmturning length: 1245 mmcontrol: FANUC i-Series turning diameter over bed: 376 mmx-travel: 230 mmz - travel: 1350 mmrapid travel x/y/z: 24/30 m/minmain spindle speeds:: 2800 spindle motor: 35 / 26 kWmax. torque on the spindle: 1613 Nmspindle passage: 102 mmtotal power requirement: 33,91 Kvaweight of the machine ca.: 7 tdimensions of the machine ca.: 4,6 x 2,11 x 2,3 mEquipped with:- Fanuc i-Series CNC control- C-axis- 3-jaw chuck, 304 mm diameter- 12-station tool turret- Tailstock- Chip conveyor- CEOnly 2,300 spindle hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used machine CNC Turning and Milling Center Machine Type: CNC Lathe Model No.: NLX2500Y/700 Manufacturer: DMG MORI Control: CELOS Year of Make: 2016 #001252 - Main spindle 4,000 rpm - Clamping cylinder main spindle - 3 cheek chuck - Foot switch (double) for main spindle - Y-axis - 12-speed BMT60-star turret for powered tools - Cantilever length X-axis driven tools 100mm - Scraper belt chip conveyor, rear discharge - High-pressure cooling system (800/1,100 W) 5bar - Line filter for coolant - Mechanical interface for oil mist separator 150mm - Without in-machine tool presetter This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
max. working diameter: 610 mmmax. working lenght: 1.522 mmtravel -x axis: 740 mmtravel -y axis: 410 mmtravel -z axis: 1.838 mmcontrol: MAZATROL Fusion 640M Pro b-axis: 240 °c-axis: 360 °number of spindle speeds: 4.000 U/minspindle bore: 88 mmmilling spindle turning speed range: 12.000 U/minnumbers of positions in the tool changer: 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410HThe machine is in a well-maintained condition.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 HThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used machine Machine Type: CNC Turning Center Model No.: CLX450V4 Manufacturer: DMGMORI Control: SLIMline® Multi-Touch Contr./Fanuc Year of manufacture: 2023 #001354 TECHNICAL DATA: Turning diameter max. approx. 400 mm Turning diameter standard approx. 310 mm Chuck size approx. 260 mm Turning length approx. 755 mm Rod diameter max. spindle/chuck approx. 80/78 mm Turret stations approx. 12 X-axis approx. 276 mm Z-axis approx. 830 mm Y-axis approx. 120(+-60) mm Tailstock approx. 800 mm Spindle speed approx. 4000 rpm Speed AGW max. approx. 4000 rpm Rapid traverse X/Z approx. 30/30 m/min Rapid traverse Y approx. 22.5 m/min Footprint L x W x H approx. 4.30x2.45x2.30 m (with chip conveyor) Machine weight approx. 6,250 kg Main spindle A2-8" 17 / 25.5 kW (100/40% ED), 4,000 rpm - 3-jaw chuck - Differential Compressive Stress for the Main spindle - Foot control ped ...
turning diameter: 356 mmturning length: 510 mmcontrol: M 730 BM total power requirement: 40 kVAweight of the machine ca.: 6,6 tdimensions of the machine ca.: mCNC control:Mitsubishi 730 BMMain spindle:Speed: 5000 rpmPower: 15/11 kW (15% duty cycle / constant)Bar diameter: 65 mmSub spindle:Speed: 6000 rpmPower: 11/7.5 kW (25% duty cycle / constant)Turret:12 stationsTool spindle speed: 10000 rpmPower: 5.5/3.7 kW (5 minutes / constant)Y-axis travel: +/- 50 mmEquipment:Machine with gantry loader:Left-hand installation, 14-station storage, 20-pallet workpiece storage,Double gripper conveyor3-jaw hydraulic KITAGAWA power chuck, 210 mm diameterHigh/low pressure chuck system for main and counter spindlesMABEO high-pressure pump with 1.5 MPa filter unitCoolant gunCoolant sprayer on the chuck for main and counter spindlesCoolant sprayer for the machine bed claddingOil mist separatorHinged belt c ...
Used machine Machine type: CNC turning and milling center Model: CTXalpha 500 V6 Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2022 #001272 Technical data Turning diameter max. approx. 240mm Turning diameter standard approx. 200mm Chuck size approx. 210mm Turning length approx. 480mm Rod diameter max. approx. 52/option65mm Turret Stations 12 X-axis approx. 210mm Z-axis approx. 525mm Spindle speed 1/2 approx. 5000/6000 rpm Speed AGW max. approx. 5000U/ Rapid traverse X/Z/Y 30/30/22.5 • Main spindle 5000 Ulmin • Hydraulic 3-jaw chuck 210 mm • Sub-spindle 6000 Ulmin • Hydraulic 3-jaw chuck 170mm • 12 station turret VDI 30 Trifix • Tool drive for all stations • C-axis • Y-axis • Alternating speed • Coolant supply through the sub-spindle • Swivelling tool presetter • Coolant spray gun, 5bar • CTXalpha ...
turning diameter: 220 mmturning length: 450 mmcontrol: Siemens 840 D main drive DC: 27 kWtotal power requirement: 27 + 8,5 + 5 + X kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 10 x 2 x 2 mMovie:https://www.youtube.com/watch?v=OffdO1J4G5YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32/8 Manufacturer: DMGMORI Control: Fanuc 32i First commissioning: 2019 #001328 Location: Germany T-main and sub-spindle - Y-axis on carriage 1 - Y-axis on carriage 2 - C-axis on main spindle - C-axis on sub-spindle - Tank for chips included Coolant Pump - Workpiece unloading belt - Flushing for counter-spindle pliers - Hinge belt chip conveyor - Signal lamp 4-colour - IEMCA Boss 338/32HD bar feeder This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
x-travel: 410 mmy-travel: 570 mmz-travel: 140 mmcontrol: Mazatrol Matrix Maximum working diameter: 545 mmMaximum working length: 519 mmmain spindle speed: 35 - 6000 U/mintool taper: Capto C6 rapid traverse y/x/z axis: 30/26/33 m/minPerformance/capacity:Max. swivel range: 545 mmMax. machining diameter: 545 mmMax. outside diameter for bar work: 51 mmMax. machining length: 519 mmMax. workpiece weight:-Chuck work: 150 kg -Bar work: 200 kgMain spindle:Spindle speed: 35-6000 rpmSpindle bore diameter: 61 mmMax. torque: 161 NmTailstock:Rapid traverse: 8 m/minTravel range (advance/return): 434/281 mmMilling head:Milling head type: Single spindle with ATCTool shank type: Capto C6Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mmMilling s ...
Used machine Machine type: CNC turning and milling center Model No.: CTXgamma1250TC4a Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2020 #001348 Location: Germany Technical data - Main spindle as integrated spindle motor, ISM102 - Sub-spindle as integrated spindle motor, ISM 76 - tailstock function for the sub-spindle - C-axis and spindle brake (hydr.) - Chuck rinsing device of the main spindle, external - Absolute, direct displacement measuring systems X-'Y-'Z1-axis - Differential stress main spindle - 36-cavity tool disc magazine - Hinge belt chip conveyor - Coolant system 8/20/80 bar - Coolant supply through the sub-spindle - Coolant spray gun - Mechanical oil mist separator - Automatic work area door - Workpiece probes - Tool turret at the bottom This offer is subject to change and non-binding. Changes, errors and prior ...
turning diameter: 380 mmturning length: 580 mmswing dia.: 695 mmX-Axis movement: 234 mmY-Axis movement: 100 mmZ-Axis movement: 575 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 4500 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: MATRIX NEXUS II Main Spindle:: Spindle Speed: 5000 1/minspindle motor: 26 / 22 kWspindle bore diameter: 76 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle bore: 80 mmtotal power requirement: 43 kVAWeight: 5,5 tdimensions of the machine ca.: 2,8 x 2,1 x 1,9 m- Mazatrol Nexus II CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis- 3-jaw chuck-- Main: 8-- Counter: 6- Automatic presetting (Tool Eye).- Automatic workpiece catcher.- Side belt chip conveyor (Mayfran).- Enhan ...
Used machine CNC turning-milling center Machine type: DMG MORI CLX450TC Control:DMG MORI SLIMline® Siemens Operate Year of Make: 2022 Location: Germany #0011281 Technical data Turning diameter max. spindle 1+2 approx. 400 mm Turning diameter standard spindle 1+2 approx. 250 mm Rod diameter max. spindle 1 approx. 65 mm X-axis approx. 750 mm Z-axis approx. 1,100 mm Y-axis approx. +-100 mm A-axis (spindle 2) approx. 1,200 mm B-axis approx. 240° (+-120°) mm Spindle speed 1+2 approx. 5,000 rpm Speed milling pindle approx. 12,000 rpm Rapid traverse X/Y/Z approx. 40 m/min Rapid traverse A spindle 2 approx. 40 m/min Rapid traverse B axis approx. 70 m/min Power spindle 1+2 max. approx. 17 (40%) kW Power milling spindle max. approx. 10.5 (40%) kW Facilities Main Drive Spindle 1/2 17KW 40% - 5000rpm - Turning-Milling Spindle HSK63 10,5KW 40% - 12,000rpm - tool magazi ...
turning diameter: 500 mmturning length: 1200 mmcontrol: Siemens 840D greates pass round over bed: 700 mmMain spindle:: turning speed range - main spindle: 20 - 5000 min/-1power capacity - main spindel: 25 /34 kWmax. Torque: NmC-Axis: 0,0001 °spindle diameter: 67 mmmilling spindle: milling spindle motor: 13 / 22 milling head speed: 12000 U/minb-axis: +/- 110 °axis stroke:: x-axis: 450 mmy-axis: +/- 100 mmz-axis: 1300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/minfeed power: 5,6 / 5,6 / 7,4 kNturret:: number of toolpositions: 24 pos.tool taper: Capto max. chucking diameter: 250 mmtail stock: tailstock quill taper MT: 5 tailstock adjustment: 1200 mmtotal power requirement: 65 kVAweight of the machine ca.: 8 tdimensions of the machine ca.: 6 x 2,7 x 2,1 mCNC - Turning and milling centre - 5 axes simultaneous- CNC control Siemens 840D SolutionLine with ShopTurn- C-axis ...
Used machine Machine Type: CNC Turning Center Model: CLX 750 V3 Manufacturer: DMGMORI Control: SLIMllne® Multi-Touch Control Siemens Year of Make: 2021 Location: Germany #001273 Turning diameter max. approx. 700 mm Turning diameter standard approx. 610 mm Chuck size approx. 400 mm Turning length approx. 1,300mm Rod diameter max. approx. 127 mm Turret stations approx. 12 X-axis approx. 435 mm Z-axis approx. 1,300 mm Tailstock approx. 1,200 mm Spindle speed max. approx. 2,000 rpm Speed AGW max. approx. 4,000 rpm Rapid traverse X/Z approx. 30 m/min Compressed air bar,L/min approx. 5, 100 bar,L/min Machine weight approx. 10,200 kg Facilities - Main spindle A2-11" with AC motor, 36/46 kW (100/40%), 2,000 min-¹ - 3-jaw chuck 300mm - Partial hollow clamping device for the main spindle 127mm - Chuck flush for the main spindle - 12-fold servo tool turret mount VDI ...
used
turning diameter: 340 mmturning length: 950 mmcontrol: OSP P300L turning diameter over bed: 580 mmturning dia. over face-slide: 470 mmWorkingspindle:: power capacity - main spindel: 22/15 kWturning speed range - main spindle: 45 - 5000 U/minspindle diameter: 120 mmspindle bore: 80 mmmax. bar capacity: 72 mmspindle head: JIS A2-6 spindle cone: 82 x 2° Torque: 350 Nmtravel -z axis: 1010 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 30 m/minx - axis: travel -x axis: 260 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 25 m/minC-Axis: 0,001 °Rapids C - Axes: 200 min -1rapid traverse: 12 m/miny-axis: 120 mmtotal power requirement: 31,7 kVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 2,2 x 1,8 x 1,8 mâ½ing and milling centreequipped with:- CNC control OSP P300L- NC tailstock- 12-position turret with driven tool station (BMT 60) 6000 rpm- C, Y-axis- Chip ...
CK 50 CNC turning center was built in 2022. This state-of-the-art, extremely efficient machine is used in both unit and series production. Workpieces with a maximum diameter of 570 mm and a length of 500 mm are machined by means of a reliable spindle and cutting tools taken from a 12-position turret. The spindle, driven by a high-powered motor reaches a speed of 4200 rpm and moves in two X,Z axes with feeds of 270 mm and 610 mm respectively. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the turning process. The CNC CK50 lathe has an inclined bed, which increases the stability of the design through better distribution of loads during machining. This solution reduces the risk of vibration and oscillation, thus increasing turning accuracy and giving the ability to perform more complex operations. It also makes it easier to evacuate the ...
turning diameter: 820 mmturning length: 4500 mmcontrol: Siemens Si 840 D sl total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNew purchase price in the year 2022 EUR 1.2 millionTime recording from Feb. 2025Operating hours = 16085 hMain spindle = 616 hMilling spindle = 369 hCNC control Siemens Sinumerik Si 840D slMax. center distance 4500 mmWorking height 1375 mmX-axis travel -15…+725 mmY-axis travel -245…+4756 mmSwing diameter over cross slide 780 mmSwing diameter over bed 820 mmC-axis, smallest increment +/-0.001°Main spindle A15 with BVG, 3135 N,/2000 rpmSpindle head DIN 55026 Form A 15Max. speed 3000 rpmMax. torque 3135 NmDrilling/milling unitMilling power (40/100% duty cycle) 36.5/29.8 kWTorque up to 1110 rpm (40/100% duty cycle) 328/261 NmMax. spindle speed 5000 rpmSwivel range (B-axis) -105…+95°Vertical travel (Y-axis) -250…+250°SR ...
