imball used for sale

Electric motor AEG IEC 225M IMB 5 Year of construction 1996 Type AM 225 MC 404 52kW Price net 250

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: 22 mm -Design: B5 -Protection class: - -Price: per piece -Quantity: 1 available -Dimensions: 320/200/H225 mm -Weight: 17 kg

Electric motor, three-phase motor with 2 speeds -Power: 2.1/7 kW -Speed: 930/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 450/260/H330 mm -Weight: 48 kg

Electric motor, three-phase motor -Power: 2.1/7 kW -Speed: 975/1450 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 54 -Number: 2x available -Price: per piece -Dimensions: 495/297/H340 mm -Weight: 53 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 610/410/H330 mm -Weight: 100 kg

Used Complete Bottling Line for PET and Glass 2007 Depalletizer This unit takes bulk of bottles that are stacked on a pallet and places them onto an accumulation area before entering the Lowerator unit. The operation of the machine is manual. There are some forklift interactions with loading full pallets onto the infeed conveyor, removing the empty pallets from the discharge conveyor and the placement of empty pallets at the operator level (layer dividers). Cleaning is carried out with the machine switched off and the hoist lowered. Bottle Lowerator The Lowerator transfer the bottles from the Depalletiser operator level to the lower level Rinser before entering the Filler. This unit is used for glass bottles only and can be mechanically adjusted easily depending on different bottle dimensions. Gripper Rinser Bottle Rinser provides an excellent way to fully clean the bottles. The bottle r ...

Plastic case with 102-piece drill/bit set. The set contains the following parts: 30x 25mm shape C bits in three plastic holders: 7x Pozidriv Bits: [PZ1 x2 / PZ2 x3 / PZ3 x2] 3x Phillips bits: [PH1 / PH2 / PH3] 10x Slot Bits: [S3 x2 / S4 x2 / S4.5 x2 / S6 x2 / S7 / S8] 6x Torx bits: [T10 / T15 / T20 / T25 / T27 / T30] 4x Imbus/Hex Bits: [3 / 4 / 5 / 6] 20x 50mm shape E bits in two plastic holders: 4x Torx bits: [T10 / T20 / T25 / T27] 5x Pozdriv Bits: [PZ1 / PZ2 x2 / PZ3] 4x Phillips bits: [PH1 / PH2 x2 / PH3] 3x Slot Bits: [S3 / S4 / S4.5] 4x Imbus/Hex Bits: [3 /4 / 5 / 6] 13x 1/4\" hexagonal shape C sockets in sizes (mm): [ 5 x2 / 5.5 / 6 x2 / 7 x2 / 8 / 9 / 10 /11 /12 / 13] 21-piece drill set consisting of: 6x HSS tin metal twist drills in mm [3/ 4 / 5 / 5.5 / 6 / 6.5 / 7] 6x Wood Twist Drills in mm [3 / 4 / 5 / 5.5 / 6 / 6.5] 6x Stone Spiral Drills in mm [3 / 4 / 5 / 5.5 / 6 / 6.5] ...

Used eccentric screw pump Nemo pump unit 4NE15A Built: 1997 Design: IMB3 Power: 0.75 KW Voltage: 230/400 V Speed: 624 rpm Machine No.: 284285 Direction of rotation: to the left, seen on drive shaft

The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air qu ...

dimensions – Height (soundproofed) [mm] 930 – Height (supersonic insulated) [mm] 2120 – Width (acoustic/supersound-insulated) [mm] 1200 – Depth (acoustic/supersound-insulated) [mm] 980 weight – soundproofed [kg] 315 – supersound-insulated [kg] 365 Highest sound pressure level [± 3 dB(A)] according to DIN 45635, part 13 86/79 – schallg. / supersound-insulated [dB(A)] Measuring area measure 15/15 schallg. / supersound-insulated [dB(A)] Formwork power level 101/94 – schallg. / supersound-insulated [dB(A)] compressor compression final temperature [°C] 110 Volume flow to PN 2 CPTC 2 at: – pmax = 8 bar [m3/min] 3.35 – pmax = 10 bar [m3/min] 2.85 – pmax = 13 bar [m3/min] 2.45 Motor Rated power [kW] 22 rated speed – 50 Hz [min-1] 3000 – 60 Hz [min-1] 3600 Protection class IP 55 Design IMB 3 ISO Class F Electrical connectio ...

Compressor Make: BITZER Type: OSN7461-K Conveyor volume: 110-303 m3/h Speed: 1450-4000 rpm. Electric motor: 2900rpm Make: SCHORCH Type: KF5200L-AB019-06T IEC 200L IMB3 Power: 55 kW Price on request Contact details can be found under Contact

The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air qu ...

Three-phase electric motor ELECTROMOTOR Type: IMB14-8C 2790 rpm 220 / 380 V Shaft diameter: Ø 19 mm Dimensions: 290 x 190 x 160 mm

Block production line HENKE - Type 140/100/40 - Board size 140 x 100 x 4.5 cm (all-plastic boards) - Control Siemens S5-115 U - uncl. 25 Molds Stone fabrication machine with facing & core concrete = Paving stones, kerbstones, kerbstones, U-stones, hollow blocks & solid block bricks can be produced - Min. product height 50 cm, max. product height 400 mm HENKE-Vibra-Matik vibration: infinitely adjustable Compaction by adjusting the imbalances - Waterjet system for product refinement, lifting ladder payload 10,000 kg, Transfer platform with skip carriage Board shelf: front track countersunk ladder, clearing lane, packager, board brush, board turning cross Rear track: Lore track, Euro pallet beaver, vertical & Horizental binding machine incl. packer and strapping system

Three-phase electric motor with tachometer generator and forced ventilation ZIEHL-ABEGG RD 160. 24 - 4 ( RD160.24-4 ) Type IMB3 11 kW 1380 rpm 400 V IP55 Shaft: Ø 42 mm used, tested ! Dimensions: 550 x 530 x 610 mm

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwheAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air wi ...

GeneralVertical Machining centre; Control: Control SIEMENS ERGOline IV CharacteristicsTable surface1400 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 220 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low o ...

GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Mode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmType of Measuring system Direct measuring systemDirect measuring system ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemTouch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipmentTouch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally to ...

Used Keber PALPACK DS Palletizer The Keber PALPACK DS is a conventional automatic palletizer designed for end-of-line carton palletizing in beverage production and industrial packaging environments. This secondhand solution streamlines the final stage of a used bottling line by arranging sealed cartons into stable layers and placing them onto pallets according to predefined stacking patterns. Engineered for reliable throughput and smooth handling, it helps producers prepare loads for wrapping, storage, and transport with consistent quality and minimal operator intervention. Manufactured by Keber, the PALPACK DS integrates seamlessly into complete packaging lines processing glass bottles packed in cartons. Typical applications include bottled beverages in standard retail formats such as 0.75L, 1.0L, and 1.5L. Its practical layout and robust construction support continuous-duty operation i ...

CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minGeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 Spindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - EActive cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stabilityAir coola ...

Heraeus Minifuge RF Analog temperature setting: -40 to 30°C Speed 0 to 6000 rpm, analogue adjustable Timer 0 to 60 min or continuous Rotor Sepatech 3360 for 4 uses, max. speed 6000 rpm Brake function Automatic imbalance shutdown Automatic lid locking during use Dimensions: approx. 68 x 67 x 56 cm (W x H x D) Weight: 70 kg More items - new and used - can be found in our shop! International shipping costs on request!

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mMovement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)600 KgWeight approx.5300 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Optio ...

This 3-axis MIKRON VCP 600 vertical machining center was manufactured in 2001. It features a 30-position tool changer, although only 21 positions are currently usable. The high-speed spindle operates at 8,000 rpm due to a slight imbalance. Consider the opportunity to buy this MIKRON VCP 600 vertical machining center. Contact us for more information.

This 3-axis TOYODA FV 1165 was manufactured in 2008. It features a spindle speed of 12,000 rpm and a robust table size of 1300 x 650 mm, with a maximum table load capacity of 1,500 kg. The machine is equipped with a FANUC 18 iMB control and has a tool capacity of 30 tools. If you are looking to get high-quality CNC milling capabilities, consider the TOYODA FV 1165 vertical machining center we have for sale. Contact us for further details.

This Van Hool 3-axle container trailer is in used but functional condition and is suitable for transporting containers and removable superstructures. The trailer is equipped with a drawbar, pneumatic suspension and has three axles, one of which is steered, which ensures stable road holding and extra manoeuvrability. Thanks to its robust construction, this trailer can be used for various logistics and transport applications. It is a Van Hool type 3K0016 with chassis number YE13K0016AB070419 and a first commissioning on 26/01/2000. The maximum permissible mass is 28,000 kg and the unladen weight is approximately 4,840 kg. The axle loads are 10,000 kg, 9,000 kg and 9,000 kg respectively. The trailer has a width of 2.5 meters and a length of approximately 7 meters according to the type plate. The trailer is equipped with container guides, mudguards, lighting and attachment points. Belgian  ...